Cortex-A510 erratum 2971420 applies to revisions r0p1, r0p2, r0p3,
r1p0, r1p1, r1p2 and r1p3, and is still open.
Under some conditions, data might be corrupted if Trace Buffer
Extension (TRBE) is enabled. The workaround is to disable trace
collection via TRBE by programming MDCR_EL3.NSTB[1] to the opposite
value of SCR_EL3.NS on a security state switch. Since we only enable
TRBE for non-secure world, the workaround is to disable TRBE by
setting the NSTB field to 00 so accesses are trapped to EL3 and
secure state owns the buffer.
SDEN: https://developer.arm.com/documentation/SDEN-1873361/latest/
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ia77051f6b64c726a8c50596c78f220d323ab7d97
This patch also checks for FEAT_HCX before enabling FEAT_MOPS
when INIT_UNUSED_NS_EL1 = 1 and adds build dependency check.
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: Iff4a068aa392fc8d29e2e4da7a2e7df0b3104e65
This patch provides architectural support for further use of
Memory Encryption Contexts (MEC) by declaring the necessary
registers, bits, masks, helpers and values and modifying the
necessary registers to enable FEAT_MEC.
Signed-off-by: Tushar Khandelwal <tushar.khandelwal@arm.com>
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I670dbfcef46e131dcbf3a0b927467ebf6f438fa4
This corrects the MISRA violation C2012-15.6:
The body of an iteration-statement or a selection-statement shall
be a compound-statement.
Enclosed statement body within the curly braces.
Change-Id: I14a69f79aba98e243fa29a50914431358efa2a49
Signed-off-by: Nithin G <nithing@amd.com>
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>
SVE and SME aren't enabled symmetrically for all worlds, but EL3 needs
to context switch them nonetheless. Previously, this had to happen by
writing the enable bits just before reading/writing the relevant
context. But since the introduction of root context, this need not be
the case. We can have these enables always be present for EL3 and save
on some work (and ISBs!) on every context switch.
We can also hoist ZCR_EL3 to a never changing register, as we set its
value to be identical for every world, which happens to be the one we
want for EL3 too.
Change-Id: I3d950e72049a298008205ba32f230d5a5c02f8b0
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
The current code is incredibly resilient to updates to the spec and
has worked quite well so far. However, recent implementations expose a
weakness in that this is rather slow. A large part of it is written in
assembly, making it opaque to the compiler for optimisations. The
future proofness requires reading registers that are effectively
`volatile`, making it even harder for the compiler, as well as adding
lots of implicit barriers, making it hard for the microarchitecutre to
optimise as well.
We can make a few assumptions, checked by a few well placed asserts, and
remove a lot of this burden. For a start, at the moment there are 4
group 0 counters with static assignments. Contexting them is a trivial
affair that doesn't need a loop. Similarly, there can only be up to 16
group 1 counters. Contexting them is a bit harder, but we can do with a
single branch with a falling through switch. If/when both of these
change, we have a pair of asserts and the feature detection mechanism to
guard us against pretending that we support something we don't.
We can drop contexting of the offset registers. They are fully
accessible by EL2 and as such are its responsibility to preserve on
powerdown.
Another small thing we can do, is pass the core_pos into the hook.
The caller already knows which core we're running on, we don't need to
call this non-trivial function again.
Finally, knowing this, we don't really need the auxiliary AMUs to be
described by the device tree. Linux doesn't care at the moment, and any
information we need for EL3 can be neatly placed in a simple array.
All of this, combined with lifting the actual saving out of assembly,
reduces the instructions to save the context from 180 to 40, including a
lot fewer branches. The code is also much shorter and easier to read.
Also propagate to aarch32 so that the two don't diverge too much.
Change-Id: Ib62e6e9ba5be7fb9fb8965c8eee148d5598a5361
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
* changes:
refactor(cpus): declare runtime errata correctly
perf(cpus): make reset errata do fewer branches
perf(cpus): inline the init_cpu_data_ptr function
perf(cpus): inline the reset function
perf(cpus): inline the cpu_get_rev_var call
perf(cpus): inline cpu_rev_var checks
refactor(cpus): register DSU errata with the errata framework's wrappers
refactor(cpus): convert checker functions to standard helpers
refactor(cpus): convert the Cortex-A65 to use the errata framework
fix(cpus): declare reset errata correctly
Similar to the reset function inline, inline this too to not do a costly
branch with no extra cost.
Change-Id: I54cc399e570e9d0f373ae13c7224d32dbdfae1e5
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Currently BRBE is being disabled for Realm world in EL3 by
switching the SBRBE bit in mdcr_el3 register to 0b00.
The patch removes the switching of SBRBE bits, and adds
context switch of BRBCR_EL2 register.
Change-Id: I66ca13edefc37e40fa265fd438b0b66f7d09b4bb
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Enable FEAT_FGT2 and FEAT_Debugv8p9 in Realm state as well.
Change-Id: Ib9cdde3af328ffdd8718b1ba404265757f2e542b
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
When ICH_VMCR_EL2.VBPR1 is written in Secure state (SCR_EL3.NS==0)
and then subsequently read in Non-secure state (SCR_EL3.NS==1), a
wrong value might be returned. The same issue exists in the opposite way.
Adding workaround in EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored. For example, EL3 software should set
SCR_EL3.NS to 1 when saving or restoring the value ICH_VMCR_EL2 for
Non-secure(or Realm) state. EL3 software should clear
SCR_EL3.NS to 0 when saving or restoring the value ICH_VMCR_EL2 for
Secure state.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-1775101/latest/
Change-Id: I9f0403601c6346276e925f02eab55908b009d957
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
The fpregs_state_* macros require the base register
to point to the start of the simd_regs_t structure.
The fpregs_context_* functions were passing the
address incorrectly shifted by 512 bytes.
Signed-off-by: Andrei Homescu <ahomescu@google.com>
Change-Id: I757a26f8910c2ab648116e001e06baa3deb2eec4
MDCR_EL3 register will context switch across all worlds. Thus the pmuv3
init has to be part of context management initialization.
Change-Id: I10ef7a3071c0fc5c11a93d3c9c2a95ec8c6493bf
Signed-off-by: Mateusz Sulimowicz <matsul@google.com>
FEAT_MOPS, mandatory from Arm v8.8, is typically managed in EL2.
However, in configurations where NS_EL2 is not enabled,
EL3 must set the HCRX_EL2.MSCEn bit to 1 to enable the feature.
This patch ensures FEAT_MOPS is enabled by setting HCRX_EL2.MSCEn to 1.
Change-Id: Ic4960e0cc14a44279156b79ded50de475b3b21c5
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
In preparation for SMCCC_ARCH_FEATURE_AVAILABILITY, it is useful for
context to be directly related to the underlying system. Currently,
certain bits like SCR_EL3.APK are always set with the understanding that
they will only take effect if the feature is present.
However, that is problematic for SMCCC_ARCH_FEATURE_AVAILABILITY (an
SMCCC call to report which features firmware enables), as simply reading
the enable bit may contradict the ID register, like the APK bit above
for a system with no Pauth present.
This patch is to clean up these cases. Add a check for PAuth's presence
so that the APK bit remains unset if not present. Also move SPE and TRBE
enablement to only the NS context. They already only enable the features
for NS only and disable them for Secure and Realm worlds. This change
only makes these worlds' context read 0 for easy bitmasking.
There's only a single snag on SPE and TRBE. Currently, their fields have
the same values and any world asymmetry is handled by hardware. Since we
don't want to do that, the buffers' ownership will change if we just set
the fields to 0 for non-NS worlds. Doing that, however, exposes Secure
state to a potential denial of service attack - a malicious NS can
enable profiling and call an SMC. Then, the owning security state will
change and since no SPE/TRBE registers are contexted, Secure state will
start generating records. Always have NS world own the buffers to
prevent this.
Finally, get rid of manage_extensions_common() as it's just a level of
indirection to enable a single feature.
Change-Id: I487bd4c70ac3e2105583917a0e5499e0ee248ed9
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
This patch fixes a bug which was introduced in commit
3065513 related to improper saving of EL1 context in the
context management library code when using 128-bit
system registers.
Bug explanation:
The function el1_sysregs_context_save still used the normal
macros that read all the system registers related to the EL1
context, which then involved casting them to uint64_t and
eventually writing them to a memory structure. This means that
the context management library was saving EL1-related SYSREG128
registers with the upper 64 bits zeroed out.
Alternative macros had previously been introduced for the EL2
context in the aforementioned commit, but not for EL1.
Some refactoring has also been done as part of this patch:
- Re-added "common" back to write_el2_ctx_common_sysreg128
- Added dummy SYSREG128 macros for cases when some features
are disabled
- Removed some newlines
Change-Id: I15aa2190794ac099a493e5f430220b1c81e1b558
Signed-off-by: Igor Podgainõi <igor.podgainoi@arm.com>
Just like for SPE, we need to synchronize TRBE samples before we change
the context to ensure everything goes where it was intended to. If that
is not done, the in-flight entries might use any piece of now incorrect
context as there are no implicit ordering requirements.
Prior to root context, the buffer drain hooks would have done that. But
now that must happen much earlier. So add a tsb to prepare_el3_entry as
well.
Annoyingly, the barrier can be reordered relative to other instructions
by default (rule RCKVWP). So add an isb after the psb/tsb to assure that
they are ordered, at least as far as context is concerned.
Then, drop the buffer draining hooks. Everything they need to do is
already done by now. There's a notable difference in that there are no
dsb-s now. Since EL3 does not access the buffers or the feature
specific context, we don't need to wait for them to finish.
Finally, drop a stray isb in the context saving macro. It is now
absorbed into root context, but was missed.
Change-Id: I30797a40ac7f91d0bb71ad271a1597e85092ccd5
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
In the chapter about FEAT_SPE (D16.4 specifically) it is stated that
"Sampling is always disabled at EL3". That means that disabling sampling
(writing PMBLIMITR_EL1.E to 0) is redundant and can be removed. The only
reason we save/restore SPE context is because of that disable, so those
can be removed too.
There's the issue of draining the profiling buffer though. No new
samples will have been generated since entering EL3. However, old
samples might still be in-flight. Unless synchronised by a psb csync,
those might be affected by our extensive context mutation. Adding a psb
in prepare_el3_entry should cater for that. Note that prior to the
introduction of root context this was not a problem as context remained
unchanged and the hooks took care of the rest.
Then, the only time we care about the buffer actually making it to
memory is when we exit coherency. On HW_ASSISTED_COHERENCY systems we
don't have to do anything, it should be handled for us. Systems without
it need a dsb to wait for them to complete. There should be one already
in each cpu's powerdown hook which should work.
While on the topic of barriers, the esb barrier is no longer used.
Remove it.
Change-Id: I9736fc7d109702c63e7d403dc9e2a4272828afb2
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
This patch enables support of FEAT_FPMR by enabling access
to FPMR register. It achieves it by setting the EnFPM bit of
SCR_EL3. This feature is currently enabled for NS world only.
Reference:
https://developer.arm.com/documentation/109697/2024_09/
Feature-descriptions/The-Armv9-5-architecture-extension?lang=en
Change-Id: I580c409b9b22f8ead0737502280fb9093a3d5dd2
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This patch disables trapping to EL3 when the FEAT_D128
specific registers are accessed by setting the SCR_EL3.D128En bit.
If FEAT_D128 is implemented, then FEAT_SYSREG128 is implemented.
With FEAT_SYSREG128 certain system registers are treated as 128-bit,
so we should be context saving and restoring 128-bits instead of 64-bit
when FEAT_D128 is enabled.
FEAT_SYSREG128 adds support for MRRS and MSRR instruction which
helps us to read write to 128-bit system register.
Refer to Arm Architecture Manual for further details.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Change-Id: I1a53db5eac29e56c8fbdcd4961ede3abfcb2411a
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
It used to be the case that a FEAT_RME build could not be built with
FEAT_BRBE support. BRBE doesn't have a 3-world aware disable and
MDCR_EL3 was not context switched to allow for disabling in Realm world.
As of commit 123002f917 MDCR_EL3 is
context switched. Since the flag for BRBE support is
ENABLE_BRBE_FOR_NS, move brbe_enable() to only happen for NS world. The
other worlds will see BRBE disabled and branch recording prohibited.
This allows for a build with both RME and BRBE.
Note that EL2 BRBE registers are not context switched. Further work is
needed if non-NS support is required.
Change-Id: I82f0f08399dcd080902477dc9636bc4541685f89
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
* This patch adds root context procedure to restore/configure
the registers, which are of importance during EL3 execution.
* EL3/Root context is a simple restore operation that overwrites
the following bits: (MDCR_EL3.SDD, SCR_EL3.{EA, SIF}, PMCR_EL0.DP
PSTATE.DIT) while the execution is in EL3.
* It ensures EL3 world maintains its own settings distinct
from other worlds (NS/Realm/SWd). With this in place, the EL3
system register settings is no longer influenced by settings of
incoming worlds. This allows the EL3/Root world to access features
for its own execution at EL3 (eg: Pauth).
* It should be invoked at cold and warm boot entry paths and also
at all the possible exception handlers routing to EL3 at runtime.
Cold and warm boot paths are handled by including setup_el3_context
function in "el3_entrypoint_common" macro, which gets invoked in
both the entry paths.
* At runtime, el3_context is setup at the stage, while we get prepared
to enter into EL3 via "prepare_el3_entry" routine.
Change-Id: I5c090978c54a53bc1c119d1bc5fa77cd8813cdc2
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Arm v8.9 introduces FEAT_SCTLR2, adding SCTLR2_ELx registers.
Support this, context switching the registers and disabling
traps so lower ELs can access the new registers.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Change-Id: I0c4cba86917b6b065a7e8dd6af7daf64ee18dcda
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Arm v8.9 introduces FEAT_THE, adding Translation Hardening Extension
Read-Check-Write mask registers, RCWMASK_EL1 and RCWSMASK_EL1.
Support this, context switching the registers and disabling
traps so lower ELs can access the new registers.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Change-Id: I8775787f523639b39faf61d046ef482f73b2a562
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Apply the mitigation only for the revision and variant
mentioned in the SDEN.
SDEN Documentation:
https://developer.arm.com/documentation/SDEN859515/latest
Change-Id: Ifda1f4cb32bdec9a9af29397ddc03bf22a7a87fc
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
With introduction of FEAT_STATE_CHECK_ASYMMETRIC, the asymmetry of cores
can be handled. FEAT_TCR2 is one of the features which can be
asymmetric across cores and the respective support is added here.
Adding a function to handle this asymmetry by re-visting the
feature presence on running core.
There are two possible cases:
- If the primary core has the feature and secondary does not have it
then the feature is disabled.
- If the primary does not have the feature and secondary has it then,
the feature need to be enabled in secondary cores.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I73a70891d52268ddfa4effe40edf04115f5821ca
Currently, as part of the context_memory report, we explicitly
list the EL3, EL1 and EL2 registers and memory usage per CPU
for each world. The remaining bits in the cpu_context_t structure
are grouped and listed as other section.
This patch enhances this part, by individually listing all the
remaining bits (GPREGS, PAUTH_REGS) separately providing
a much detailed overview of the context memory consumption
amongst the registers.
The patch has been tested on the CI with the following patch
and the results are summarised precisely.
[https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/28849]
Change-Id: I16f210b605ddd7900600519520accf1ccd057bc7
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
* Currently, EL1 context is included in cpu_context_t by default
for all the build configurations.
As part of the cpu context structure, we hold a copy of EL1, EL2
system registers, per world per PE. This context structure is
enormous and will continue to grow bigger with the addition of
new features incorporating new registers.
* Ideally, EL3 should save and restore the system registers at its next
lower exception level, which is EL2 in majority of the configurations.
* This patch aims at optimising the memory allocation in cases, when
the members from the context structure are unused. So el1 system
register context must be omitted when lower EL is always x-EL2.
* "CTX_INCLUDE_EL2_REGS" is the internal build flag which gets set,
when SPD=spmd and SPMD_SPM_AT_SEL2=1 or ENABLE_RME=1.
It indicates, the system registers at EL2 are context switched for
the respective build configuration. Here, there is no need to save
and restore EL1 system registers, while x-EL2 is enabled.
Henceforth, this patch addresses this issue, by taking out the EL1
context at all possible places, while EL2 (CTX_INCLUDE_EL2_REGS) is
enabled, there by saving memory.
Change-Id: Ifddc497d3c810e22a15b1c227a731bcc133c2f4a
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
SCTLR_EL1 and TCR_EL1 regs are included either as part of errata
"ERRATA_SPECULATIVE_AT" or under el1_sysregs_t context structure.
The code to write and read into these context entries, looks
repetitive and is invoked at most places.
This section is refactored to bring them under a static procedure,
keeping the code neat and easier to maintain.
Change-Id: Ib0d8c51bee09e1600c5baaa7f9745083dca9fee1
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
* changes:
feat(fvp): allow SIMD context to be put in TZC DRAM
docs(simd): introduce CTX_INCLUDE_SVE_REGS build flag
feat(fvp): add Cactus partition manifest for EL3 SPMC
chore(simd): remove unused macros and utilities for FP
feat(el3-spmc): support simd context management upon world switch
feat(trusty): switch to simd_ctx_save/restore apis
feat(pncd): switch to simd_ctx_save/restore apis
feat(spm-mm): switch to simd_ctx_save/restore APIs
feat(simd): add rules to rationalize simd ctxt mgmt
feat(simd): introduce simd context helper APIs
feat(simd): add routines to save, restore sve state
feat(simd): add sve state to simd ctxt struct
feat(simd): add data struct for simd ctxt management
This patch adds the common API to save and restore FP and SVE. When SVE
is enabled we save and restore SVE which automatically covers FP. If FP
is enabled while SVE is not, then we save and restore FP only.
The patch uses simd_ctx_t to save and restore both FP and SVE which
means developers need not use fp or sve routines directly. Once all the
calls to fpregs_context_* are replaced with simd_ctx_*, we can remove
fp_regs_t data structure and macros (taken care in a following patch).
simd_ctx_t is currently allocated in section of its own. This will go
into BSS section by default but platform will have option of relocating
it to a different section by overriding in plat.ld.S.
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Signed-off-by: Okash Khawaja <okash@google.com>
Change-Id: I090f8b8fa3862e527b6c40385249adc69256bf24
This adds assembly routines to save and restore SVE registers. In order
to share between FPU and SVE the code to save and restore FPCR and
FPSR, the patch converts code for those registers into macro.
Since we will be using simd_ctx_t to save and restore FPU also, we use
offsets in simd_ctx_t for FPSR and FPCR. Since simd_ctx_t has the same
structure at the beginning as fp_regs_t, those offsets should be the
same as CTX_FP_* offsets, when SVE is not enabled. Note that the code
also saves and restores FPEXC32 reg along with FPSR and FPCR.
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Signed-off-by: Okash Khawaja <okash@google.com>
Change-Id: I120c02359794aa6bb6376a464a9afe98bd84ae60
This patch checks if the Errata 2938996(Cortex-A520) , 2726228(Cortex-X4)
applies to cores and if affected applies the errata workaround which
disables TRBE.
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I53b037839820c8b3a869f393588302a365d5b97c
With introduction of FEAT_STATE_CHECK_ASYMMETRIC, the asymmetry of cores
can be handled. SPE is one of the features which can be asymmetric
across cores.
Add a function to handle this asymmetry by re-visting the feature
presence on running core.
There are two possible cases:
- If the primary has the feature and secondary does not have it then,
the feature needs to be disabled.
- If the primary does not have the feature and secondary has it then,
the feature need to be enabled
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ibb2b88b5ef63b3efcb80801898ae8d8967e5c271
TF-A assumes that all the cores in a platform has architecture feature
parity, this is evident by the fact that primary sets up the
Non-secure context of secondary cores.
With changing landscape of platforms (e.g. big/little/mid cores), we are
seeing more and more platforms which has feature asymmetry among cores.
There is also a scenario where certain CPU erratum only applies to one
type of cores and requires a feature to be disabled even it supports
the feature.
To handle these scenarios, introduce a hook in warmboot path which would
be called on the running CPU to override any feature disparity in the
NS context stashed up by primary. Note that, re-checking of feature for
Secure/Realm context is not required as the context is created on
running core itself.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I5a01dbda528fa8481a00fdd098b58a7463ed0e22
Introduce a new feature state CHECK_ASYMMETRIC to cater for the features
which are asymmetric across cores. This state is useful for platforms
which has architectural asymmetric cores (A feature is only present in
one type of core e.g. big).
This state is similar to FEAT_STATE_CHECK (dynamic detection) except
that feature state is also checked on each core during warmboot path and
override the context (just for asymmetric features) which was setup by
core executing CPU_ON call.
Only Non-secure context will be re-checked as secure and realm context
is created on same core.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ic78a0b6ca996e0d7881c43da1a6a0c422f528ef3
Currently the EL1 part of the context structure (el1_sysregs_t),
is coupled with feature flags reducing the context memory allocation
for platforms, that don't enable/support all the architectural
features at once.
Similar to the el2 context optimization commit-"d6af234" this patch
further improves this section by converting the assembly context-offset
entries into a c structure. It relies on garbage collection of the
linker removing unreferenced structures from memory, as well as aiding
in readability and future maintenance. Additionally, it eliminates
the #ifs usage in 'context_mgmt.c' source file.
Change-Id: If6075931cec994bc89231241337eccc7042c5ede
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
* Currently, "ERRATA_SPECUALTIVE_AT" errata is enabled by default
for few cores and they need context entries for saving and
restoring EL1 regs "SCTLR_EL1 and TCR_EL1" registers at all times.
* This prevents the mechanism of decoupling EL1 and EL2 registers,
as EL3 firmware shouldn't be handling both simultaneously.
* Depending on the build configuration either EL1 or EL2 context
structures need to included, which would result in saving a good
amount of context memory.
* In order to achieve this it's essential to have explicit context
entries for registers supporting "ERRATA_SPECULATIVE_AT".
* This patch adds two context entries under "errata_speculative_at"
structure to assist this errata and thereby allows decoupling
EL1 and EL2 context structures.
Change-Id: Ia50626eea8fb64899a2e2d81622adbe07fe77d65
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
The system register actlr_el2 can be set during CPU or platform reset
handler. E.g. on Arm Total Compute platform, the CLUSTERPMUEN bit of
actlr_el2 is set in the platform reset handler to enable the write
access to DSU PMU registers from EL1. However, as EL2 context gets
restored without saving it beforehand during jump to SPM and next NS
image, therefore, the initialized value of actlr_el2 is not retained.
To fix this issue, keep track of actlr_el2 value during the EL2 context
initialization. This applies for both secure and non-secure security
state.
Change-Id: I1bd7b984216c042c056ad20c6724bedce5a6a3e2
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
