Update nand driver to match GHRD design, fix row
address calculation method and other misc updates.
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I1cb3dda43e767ba243fbe89bfa18818db321c5c2
Enable query of fip offset from QSPI on RSU boot for
Intel agilex and intel agilex5 platform
Change-Id: Iaa189c54723a8656b9691da5849fd86b9986cfa1
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
Query the fip binary from SPT table on RSU boot on Intel Agilex series.
Change-Id: I8856b49539f33272625d4c0a8c26b81b5864c4eb
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
* changes:
feat(intel): support QSPI ECC Linux for Agilex
feat(intel): support QSPI ECC Linux for N5X
feat(intel): support QSPI ECC Linux for Stratix10
feat(intel): add in QSPI ECC for Linux
Update from INFO to VERBOSE when print out debug message.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iefdbd44e711c0fd589bef454b42754cf9e3cd391
After a calibration we cannot trust the DDR content. Let's explicitly
clear the DDR content using the built-in scrubber in this case.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I6f429623f76a21f61f85efbb660cf65d99c04f56
Due to design issue, updated system counter back to hardcoded 400MHz
Change-Id: Id85b2541880fac88b2a9a0a46b27b0a0da0eed6d
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Using mpu_peri as the clock source will caused the system
timer vary. System timer shall get from a static clock
source.
L4 and L3 clock are both the same at the moment.
There shall be a hardware update to differentiate the clock pll.
To keep this as dormant function for now.
Change-Id: I4d253e2f24a74cbec59bfcbf0e8547abbe3643a8
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Add QSPI ECC new opcodes for Linux to access to SDM register
Change-Id: I548e30340320ae2c2c9d60d20b218ee844516d64
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Add QSPI ECC new opcodes for Linux to access to SDM register
Change-Id: I65c7fd1bfc21baa6c45d9f8a0ee9618e6061e8d7
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Add QSPI ECC new opcodes for Linux to access to SDM register
Change-Id: I1cdacc0f10dfa2a969f0bc5086277fd9081d02e2
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Add QSPI ECC new opcodes for Linux to access to SDM register
Change-Id: If9ac35afdddb91db6bad6b474060cd001f6d89e6
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Remap base address for SDM to access DRAM.
Change-Id: If064bd1ff4571d3217b136d9b5ebbfdecb68231e
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
SDMMC is 1 of the boot source for Agilex5 and legacy products.
By enabling this, ATF is able to read out the DTB binary and
loaded it to DDR for Linux boot.
Change-Id: Ida303fb43ea63013a08083ce65952c5ad4e28f93
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
This patch is used to update the hardcoded mpu freq ticks
to obtain the freqq from the hardware setting itself.
Change-Id: I7b9eb49f2512b85fb477110f06ae86ef289aee58
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Linux RAS shall handle the SEU error received from SDM and report
an error message to user
Change-Id: I89181a388063ce9bd6f56b45b1851ccb08582437
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Update DDR range checking for Agilex when total max size of
DRAM_BASE and DRAM_SIZE overflow unsigned 64bit.
Change-Id: Iaecfa5daae48da0af46cc1831d10c0e6a79613c2
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
The src addr and dest addr of fcs functions are not checked against
their valid ddr range. Thus adding the ddr range checking to avoid
overlap/overwritten ddr address.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I9b4d4155dd16d9d5d36e0c91e4a2600c17867daf
The shall code only limit ECB, CBC and CTR mode to flow through the init
function. Anything other than that, the code shall reject to prevent
security vulnerability.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I702ce90e229188830f8936bee2999610e9559b8b
Read QSPI bank buffer data in bytes to avoid
inter-bank read failures.
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Change-Id: If768d7cdd362694df3f3c86c959afad01a523f21
U-boot is allowed to configure OCRAM access. However
ATF BL31 will overwrite it. Thus removing this function
to allow for proper configuration.
Change-Id: I45173ef8f472c3620486de0cbf6452ba5f78be01
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
The code is designed to execute SOC2FPGA and LWSOC2FPGA first
then to F2SOC and both sharing the same result "return".
Thus when F2SOC is executed, the "return" result will overwrite
SOC2FPGA "return" result even though it is not enabled.
Using 2 different "return" result to for each bridges and
return both of them at the end of the function to
avoid being overwritten.
Change-Id: Id9de3f416fe3020db35bc946135b175be2a7dc1e
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
There are several features included in BL2 causing the size getting
bigger for RELEASE mode. When build with DEBUG mode, the size will
be bigger thus causing BL2 image has exceeded its limits.
Change-Id: I7542f5ea001542450695d48e8126bcca8728d76a
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Update stream id to non-secure for SDM which is to
bring up FPGA config via SMMU.
Change-Id: Ib8836fa0cf31fe0cfc0261123e051772923bb66b
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
For Simics and official release, revert back to 400MHz instead of
80MHz. Sys counter shall get from a static clock.
Change-Id: I9ee3586bc411af8d7381c8bd6404b8449b0c3f69
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This patch is used to update reset manager support
for Agilex5 Soc FPGA.
1. Update HPS bridges support for socfpga_bridges_disable
a. SOC2FPGA
b. LWSOC2FPGA
c. F2SDRAM
d. F2SOC
Change-Id: Ia539ff289e83303ae3b4d78b9ac1d50c9f9558da
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Temporarily workaround for Zephyr SMP testing.
Change-Id: I9d2d209e9f384d079f0311b3a8b0b760e0566877
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Boot scratch cold 8 register is fully used by n5x.
Update to use boot scratch cold 8 bit 19 register for cpu0 ON/OFF
indicator.
Change-Id: I45ebfdcc17c47bcce69f5f611e677ac7838ecf52
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This patch is to restructure watchdog.
Move platform dependent MACROs to individual platform socfpga_plat_def.
Common watchdog code file and header file will remain for those common
declaration.
Change-Id: Ibb640f08ac313bbad6d9295596cb8ff26e3e626d
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
MULTI_CONSOLE_API have been removed long time ago by commit 5b6ebeec9c
("Remove MULTI_CONSOLE_API flag and references to it") that's why remove
references in platform.mk files and also in one rst which is not valid
anymore.
Change-Id: I45f8e7db0a14ce63de62509100d8159b7aca2657
Signed-off-by: Michal Simek <michal.simek@amd.com>
