With the updated firmware update implementation in the Trusted Services,
it is no longer needed to carve out static memory. Memory will be
allocated dynamically in U-Boot and shared with the firmware update
secure partition of Trusted Services.
Change-Id: I0fb128a458773236ee10526edfa1116b229e4d6e
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Icen Zeyada <Icen.Zeyada2@arm.com>
This commit introduces a new ARM platform-specific build option called
`ARM_FW_CONFIG_LOAD_ENABLE`. This option enables the loading of the
`fw_config` device tree when resetting to the BL2 scenario.
Additionally, the FW_CONFIG image reference has been added to the
fdts/tbbr_cot_descriptors.dtsi file in order to use in the scenario of
RESET_TO_BL2.
Signed-off-by: Divin Raj <divin.raj@arm.com>
Change-Id: I11de497b7dbb1386ed84d939d6fd2a11856e9e1b
It will be used for PMIC on STM32MP257F-EV board.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7f95220512de4416323b381fec7c7dcb044c64fd
Update stm32mp251.dtsi SoC DT file to include UART and I2C nodes.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: I6f52ec2c1735d28ba4a424af71e7eae5b0ac3e0d
This feature is enabled by default using STM32MP_DDR_FIP_IO_STORAGE.
DDR firmware binary is loaded from FIP to SRAM1 which needs to be
mapped.
Only half of the SRAM1 will be allocated to TF-A.
RISAB3 has to be configured to allow access to SRAM1.
Add image ID and update maximum number on platform side also.
Fill related descriptor information, add policy and update numbers.
DDR_TYPE variable is used to identify binary file, and image is now
added in the fiptool command line.
The DDR PHY firmware is not in TF-A repository. It can be found at
https://github.com/STMicroelectronics/stm32-ddr-phy-binary
To ease the selection of the firmware path, STM32MP_DDR_FW_PATH is added
to platform.mk file.
Change-Id: I09ab0a5c63406055a7b5ccd16d65e443de47ca2f
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Add BL31 load address (beginning on SYSRAM) and size in fw-config DT
file.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: I2fcd8d326f394090401ac59b47216d59d3e911bc
TC4 adds a new SMMU-700 specifically for the DPU (in the RoS). This is
used as the DPU SMMU instead of the existing SMMU used for both the GPU
and DPU. Update the devicetree to reflect this.
Note that the streamID values have also changes for this new SMMU. This
is because TC4 also updates the new SMMU to use a different streamID for
each DPU port - these must all be added to the device tree.
Change-Id: If2ce9749e40937fd1291346d071b691cfb662f2e
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
A SMMU-700 is used on TC4 for only GPU, on both FVP and FPGA. Add DT
binding for it.
Change-Id: I1b840676fd02c3961d4efdd769f12a4b01d459fb
Signed-off-by: Leo Yan <leo.yan@arm.com>
This patch incorporates the changes for Drage GPU to uses new access
window interface "IRQ_AW". As the interrupt properties are different
between TC4 and other TC platforms, this patch appends the interrupt
properties in platform specific DT binding file.
Change-Id: I2ca505846f03ce64b8e5f02fd202962dbfe39f25
Signed-off-by: Leo Yan <leo.yan@arm.com>
The TC4 uses a new RoS (Virtual Peripherals) and places them at
different address to that in TC3. Add these addresses to the DTS.
Change-Id: Ia62a670e47cdc98b3c113a670a21edc65905cafe
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Since TC3 and TC4 share most components in the hardware design, they can
reuse the device tree binding. For this reason, this patch extracts the
common modules from tc3.dts and put into the file tc3-4-based.dtsi.
As a result, a new created tc4.dts file includes tc3-4-based.dtsi for
support DT binding for the TC4 platform.
Change-Id: Ib7497162cb131d94a722aeaa14a1a37fb0095829
Signed-off-by: Leo Yan <leo.yan@arm.com>
This is a generic file to be use on all STM32MP2 boards, as what is
done for STM32MP15.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I4ae0cf0b7d21b1a2072b7ff5e6b98837d603c860
Add dedicated RCC file to define clock tree and include it in
STM32MP257F-EV1 board DT file.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I259075f34d02534063c95fb571aec6ada480ce5f
Print information about CPU type, package and revision.
SoC revision ID of MP2 family are defined with the OTP 102.
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I14a95c8a7cb9b06ce32c2e592ae69a1741067e8d
Add sdmmc1 node to support SD-cards on STM32MP257F-EV1 board, and
sdmmc2 node for eMMC.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I375e35aa6a96719a69df976500915be51c395b00
Add the pins nodes for SD-card or eMMC. Those pins are used on
STM32MP257F-EV1 board.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I96fe8210502b073bc222a70453bee1863a257c7b
Add the sdmmc1 & sdmmc2 nodes in stm32mp251.dtsi file, to support
eMMC or SD-cards.
To avoid increasing DT size if SD-card or eMMC boot is not selected,
the nodes are removed from DT thanks to stm32mp25-bl2.dtsi overlay.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2ed841442b7dddf0c441ae3b3d2462ef535f9951
This will be required for FCONF management on STM32MP2.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: If651a9aa36cdf415f570b2392daa08c198d629d2
Remove the deprecated property "pins-are-numbered" from pinctrl and
pinctrl_z nodes of stm32mp25 soc to conform with the upstream series
of the link below.
Link: https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=69786
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I1ed98c94c5003bc9903229957cb072da4211238f
Integrate the cot-dt2c tool into build process
for TBBR configuration
Change-Id: I42ccbc96c5c8fd21266200e427306a80236a78aa
Signed-off-by: Xialin Liu <Xialin.Liu@ARM.com>
align the nv counter naming for stm32mp1-cot-descriptor.dtsi file
Change-Id: I8c41c5e323e8bf867e08b4590dfb42e86204ab65
Signed-off-by: Xialin Liu <Xialin.Liu@ARM.com>
Align the naming of nv_counter to nv_ctr in the DTBs
so that they match with the static C files. Update the
binding documentation accordingly. This renaming is beneficial
for the upcoming conversion tool that will convert CoT DT files
to C files.
Change-Id: If65d51ad9fc6445b1ae9937f1691becf8742cf01
Signed-off-by: Xialin Liu <Xialin.Liu@ARM.com>
CPU PMU types are not same for all CPUs on TC platforms, so define the
PMU nodes per micro architectures.
Change-Id: I4e940976cdda9a6eab3e15936c6c41a2bb668c9d
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Add node for Statistical Profiling Extension, which provides
periodic sampling of operations in the CPU pipeline and reports
this via the perf AUX interface.
Change-Id: Ic7a9d9ce927edbce02c7c09470a009dc56247240
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Define ppi-partitions for little, middle, and big cpu groups. PPI
affinity is expressed as a single "ppi-partitions" node, containing a
set of sub-nodes for each microarchitecture type, each with the
property 'affinity' which should be a list of phandles to CPU nodes.
PPI paritions are useful to affine specific PPI with set of CPUs
so that the drivers of micro-architecture specific nodes which uses
PPI can be divided based on CPU list e.g. SPE-PMU, CPU-PMU etc.
Change-Id: If7d47f71387ac982d2d992a0ce2de1652d564bd6
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Change the GIC's DT property 'interrupt-cells' to 4, so the 4th cell is
a phandle to a node describing a set of CPUs this interrupt is affine
to.
If an interrupt is a PPI, and the node pointed in the 4th cell must be a
subnode of the "ppi-partitions" in the GIC node. For interrupt types
other than PPI, this cell must be zero. This is a preparison for
sequential changes for interrupt partitions, as the first step, it sets
all zeros for the interrupt affinity.
Change-Id: I66490a86a27aad5db6b1a42c2d8e0d042eee46a9
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Enable NI-Tower PMU on TC3.
Change-Id: I8a4d4e31e84ab33f95bc8b7661e873cf97561b79
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Add DT binding for Arm DSU PMU node.
Change-Id: Iadfb5d3bb3f69c7a771516180d1c165e60eef51d
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
* changes:
feat(st-clock): use early traces
fix(st-clock): adapt order of CSS on LSE and HSE
refactor(st-clock): remove unused struct
feat(stm32mp1-fdts): remove RTC clock configuration
refactor(st-clock): move stm32mp1_clk_rcc_regs_*lock
refactor(st-clock): driver size optimization
refactor(st-clock): remove BL32 support on STM32MP13
feat(st-clock): don't gate/ungate an oscillator if it is not wired
feat(dt-bindings): add missing SPIx bus clocks
feat(stm32mp1-fdts): remove PLL1 settings
feat(st-clock): update with new bindings
feat(stm32mp1-fdts): new RCC DT bindings for STM32MP1
feat(dt-bindings): new RCC DT bindings
feat(stm32mp1): always boot at 650MHz
refactor(st-clock): remove LSEDRV_MEDIUM_HIGH for STM32MP13
fix(st-clock): display proper PLL number for STM32MP13
fix(st-clock): do not reconfigure LSE
feat(stm32mp1-fdts): move RNG1 to CSI to improve random generation
refactor(st-clock): remove unused clk function in API
refactor(st-clock): support deactivated STGEN in stm32mp_stgen_config
feat(st-clock): add function to restore generic timer rate
RTC clock configuration is done now in OPTEE.
Note: The RTC clock source can only be configured once.
TF-A, configuring the RTC clock source will have no effect in OPTEE.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Change-Id: I111ba96b27d0de0c45086ba8ef947dd2e6785672
TF-A BL2 always boot at 650MHz using an algorithm to calculate PLL1
settings, without reading DT. Remove the corresponding nodes.
Change-Id: I0003337d8d37df7b2a70a84b5475f4278c4c4669
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
LSI was too slow to provide enough random numbers (limited
to 6ms for 16 bytes production). Switch to CSI that allow
to get the RNG fifo ready in less than 50µs.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: I76d1fe58e2f4d5416a96f48123ae36bd82d8a8ee
Since the CoT device tree is intended solely for BL2, remove the
nodes that are not handled by BL2.
Change-Id: I977eec902f16de59743e97d15148d63934b7b863
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Add Dualroot CoT DTB, which allows Dualroot platforms to get their chain
of trust description from a configuration file, rather than hard-coding
it into the firmware source code itself.
Change-Id: I03af8f28ba7ad56b883ff5e7961500ffdb8c3957
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
The SMMU 600 is used on TC3 FPGA board with the display device, add the
device tree binding for it.
Change-Id: Iadf85873720ca47bbbda999aa7b18a9db98ae945
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
TC3 adds a new SMMU-700 specifically for the DPU. This is used as the
DPU SMMU instead of the existing SMMU used for the DPU. Update the
device tree to reflect this.
Change-Id: I865140f8f53bceaa8849f6583190b240eeee0539
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
The usage for SMMU-700 is not consistent across TC platforms:
SMMU-700 on TC2:
| FVP | FPGA
--------+-------+------
Display | Used | Used
GPU | Used | Used
SMMU-700 on TC3:
| FVP | FPGA
--------+-------+------
Display | No | No
GPU | Used | No
This commit changes to use append mode for SMMU-700 to bind it on TC2
and TC3 separately. As a result, the TC_IOMMU_EN configuration is not
used, remove it.
Change-Id: Ic4152eb4c8ef97bf27b8a97c3c6cb86e32a2e8eb
Signed-off-by: Leo Yan <leo.yan@arm.com>
TC3 has 4 MCN instances, each of them have PMU registers to count
different MCN cache access events, add entries for MCN PMU so that Linux
MCN PMU perf driver can be used with perf.
Change-Id: I7e0ac5025231c3f19d5291292d4cae186accc544
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
