Support FDT for Agilex5 platform
1. Created wrapper file socfpga_dt.c
2. Added in Agilex5 dts file
3. Implemented fdt_check_header
4. Implemented gic configuration
5. Implemented dram configuration
Remove init of FDT as Agilex5 has no plan to roll
out FDT at the moment.
Change-Id: If3990ed9524c6da5b3cb8966b63bc4a95d01fcda
Signed-off-by: Jit Loon Lim <jit.loon.lim@altera.com>
Support Agilex5 B0 jtag id for fpga reconfig.
Change-Id: I4efb5a046a0f11009a1f08412ff0e48f376c94e1
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Agilex5 platform:
Boot scratch COLD6 register is meant for Customer use only.
So, use Intel specific COLD3 register with [5:2]bits to
determine the warm reset and SMP boot requests.
Also handle the unaligned DEVICE/IO memory store and load
in the assembly entrypoint startup code.
Agilex, Stratix10, N5X platforms:
Use only the LSB 4bits [3:0] of the boot scratch COLD6 register
to detect the warm reset request.
Change-Id: I4fd6e63fe0bd42ddcb4a3f81c7a7295bdc8ca65f
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@altera.com>
Currently the FPGA reconfig status only return a single error status
which make the debugging of FPGA reconfiguration hard.
This patch is to expose the error status, major error code and
minor error code, for the FPGA reconfig to upper layer app.
Change-Id: I2fc68e30b45ff137f3e52f9569fdf2eaf2ca94ee
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
This change is to add in new Mailbox CMD to SDM for MPFE isolation.
Change-Id: I52c84dc227e1c8edbded63c699ded63e431d9af2
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
This is to redesign the flow of F2SOC bridge enable and disable.
Change-Id: I9b2a2a11fa2ad8e622765971fdf59a0738246e13
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Refactor to be more robust. Removed duplicated and not used functions.
Add in ADMA read.
Change-Id: I1a5a00397ece6f9ccc5916225ab5317010b01b52
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Update the 'plat_get_my_entrypoint' assembly routine to
differentiate between cold reset, warm reset and SMP
secondary boot cores request.
Add secondary core boot request markup in BL31.
Perform CACHE flush/clean ops in case of warm reset request also.
Change-Id: I7d33e362a3a513c60c8333e062ce832aa7facf38
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
This is for SMMU and Remapper enabled/disabled for
Linux FCS feature. The JTAG ID is to determine which
Agilex5 model shall be implemented.
Change-Id: Ib10d0062de8f6e27413af3dd271d97b9c2e5c079
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Existing boot source is hardcoded in socfpga_plat_def.h.
To change boot source, user need to update code.
Thus adding this will remove the code update needed when
need to change boot source.
Also, it will have ARM_LINUX_KERNEL_AS_BL33 flag for each
platform in platform.mk. This will be easily to control
based on platform build.
Change-Id: I383beb8cbca5ec0f247221ad42796554adc3daae
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Move the hand-off data offset value from the common
platform header file to each socfpga platform specific
header file.
Change-Id: Icfe917f788814c329659c44e298cf05d6e3d0dd9
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Fix CCU settings for cache maintenance.
Change-Id: I9af35a6ab7aa9ee20e05ba82d0a042948ac29a93
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Update preloaded_bl33_base for legacy product for Yocto.
The Yocto Jenkins build was initially configured to build products
where the starting of the DDR is from 0x0000 0000. And if there is
no NS_image_offset set, the Jenkins is not able to acquire the correct
address offset to boot up the system. However, in the direct OS boot,
there is no issue as the user shall always include the address offset
during the compilation phase. Otherwise, the code shall execute the
default address offset. Besides that, this also provides the
flexibility to user to customize their SoC design by not restricted
to the default address.
SDMMC block size. It was changed due to the need when boot to Linux.
Kernel.itb size is big thus we have to increase the available reading
block size. Otherwise for normal U-boot and Zephyr it shall not be
reading a big block size to avoid "garbage" data.
Change-Id: I1c2a22db28bf0ada734563e40efd4f5749951273
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
This fix is to flush and invalidate the caches before cold reset.
Issue happen where Agilex5 hardware does not support the caches flush.
Thus software workaround is needed.
Change-Id: Ibfeecbc611d238a069ca72f8b833f319e794cd38
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Enable and update code for TF-A direct boot Linux
for Agilex platform.
Change-Id: Id95986b7015a2a01f0aff80e1c7d8f8bb8fb4637
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Implement burst speed read/write for SOC and LWSOC. Set bridge control
register to enable the register bit
Change-Id: I815b912cb90d79a548163d198eea177d70dfbc0d
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Update hand-off data structure to include agilex5
platform specific parameters.
Change-Id: Ic610e2d8da7488e49462293d13293e26520579e2
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
BL2: Update BL2 init flow, Timer base address, avoid cache
flush of BL2 image descriptors
BL31: Remove re-init of CCU and other misc updates
Change-Id: I5f04901cc455c306209c83aad2377bbf7d8a1789
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
DDR and IOSSM driver code for Agilex5 platform,
initialize the DDR/IOSSM in BL2 EL3 early flow.
Change-Id: I3e4205171d9356190b60498cae322318520bb1c2
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
The printout message is misleading.
Update the message content and mask out the return code.
Change-Id: I08acb73894f8504b2773a19dbb10b42a65fcda5d
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Increase the timeout of waiting for bridge ack to solve the
fpga config hung.
Change-Id: I967af02b336c296206b4947be718953ff8ca30cf
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
memcpy does not check the dst_size which may
create vulnerable issue as it can overflow the buffer.
Using memcpy_s which check the dst_size will help to
reduce the risk. Also, this memcpy is always 4 bytes
each time.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I413e6ae2ee9330501703c4cd63b7943c6f55b4c7
This patch is to add in missing ECC register (INITSTAT)
Change-Id: Iecf03dc9597ec2884901c132fb9cef7e90ab06a0
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This patch is to implement Vendor Authorize Bootloader
support for Intel Agilex, Agilex5 and N5X.
Change-Id: I23bdbbe15b3732775cea028665e2efcbd04b3aff
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Hardware hdskack register does not return a correct value after
fence and drain of the bridge is done. Thus creates software
workaround.
Change-Id: I78d8ee0596c3e7bd4883bfd6e92c883b8e369c10
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
ATF->Linux boot with QSPI boot source need to enable watchdog
so that it will not hang.
Change-Id: Id2a9ceebb1c89f711992a424f4394265efc6b388
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Linux RSU receive QSPI device info from SDM and report to user about
the device info.
Change-Id: Ib41692c9c4888c745a48a0609396aef0ca7fe25b
Signed-off-by: Kah Jing Lee <kah.jing.lee@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
