* changes:
refactor(cpus): declare runtime errata correctly
perf(cpus): make reset errata do fewer branches
perf(cpus): inline the init_cpu_data_ptr function
perf(cpus): inline the reset function
perf(cpus): inline the cpu_get_rev_var call
perf(cpus): inline cpu_rev_var checks
refactor(cpus): register DSU errata with the errata framework's wrappers
refactor(cpus): convert checker functions to standard helpers
refactor(cpus): convert the Cortex-A65 to use the errata framework
fix(cpus): declare reset errata correctly
Errata application is painful for performance. For a start, it's done
when the core has just come out of reset, which means branch predictors
and caches will be empty so a branch to a workaround function must be
fetched from memory and that round trip is very slow. Then it also runs
with the I-cache off, which means that the loop to iterate over the
workarounds must also be fetched from memory on each iteration.
We can remove both branches. First, we can simply apply every erratum
directly instead of defining a workaround function and jumping to it.
Currently, no errata that need to be applied at both reset and runtime,
with the same workaround function, exist. If the need arose in future,
this should be achievable with a reset + runtime wrapper combo.
Then, we can construct a function that applies each erratum linearly
instead of looping over the list. If this function is part of the reset
function, then the only "far" branches at reset will be for the checker
functions. Importantly, this mitigates the slowdown even when an erratum
is disabled.
The result is ~50% speedup on N1SDP and ~20% on AArch64 Juno on wakeup
from PSCI calls that end in powerdown. This is roughly back to the
baseline of v2.9, before the errata framework regressed on performance
(or a little better). It is important to note that there are other
slowdowns since then that remain unknown.
Change-Id: Ie4d5288a331b11fd648e5c4a0b652b74160b07b9
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Similar to the reset function inline, inline this too to not do a costly
branch with no extra cost.
Change-Id: I54cc399e570e9d0f373ae13c7224d32dbdfae1e5
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Similar to the cpu_rev_var and cpu_ger_rev_var functions, inline the
call_reset_handler handler. This way we skip the costly branch at no
extra cost as this is the only place where this is called.
While we're at it, drop the options for CPU_NO_RESET_FUNC. The only cpus
that need that are virtual cpus which can spare the tiny bit of
performance lost. The rest are real cores which can save on the check
for zero.
Now is a good time to put the assert for a missing cpu in the
get_cpu_ops_ptr function so that it's a bit better encapsulated.
Change-Id: Ia7c3dcd13b75e5d7c8bafad4698994ea65f42406
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Currently BRBE is being disabled for Realm world in EL3 by
switching the SBRBE bit in mdcr_el3 register to 0b00.
The patch removes the switching of SBRBE bits, and adds
context switch of BRBCR_EL2 register.
Change-Id: I66ca13edefc37e40fa265fd438b0b66f7d09b4bb
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Similar to the cpu_rev_var_xy functions, branching far away so early in
the reset sequence incurs significant slowdowns. Inline the function.
Change-Id: Ifc349015902cd803e11a1946208141bfe7606b89
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
We strive to apply errata as close to reset as possible with as few
things enabled as possible. Importantly, the I-cache will not be
enabled. This means that repeated branches to these tiny functions must
be re-fetched all the way from memory each time which has glacial speed.
Cores are allowed to fetch things ahead of time though as long as
execution is fairly linear. So we can trade a little bit of space (3 to
7 instructions per erratum) to keep things linear and not have to go to
memory.
While we're at it, optimise the the cpu_rev_var_{ls, hs, range}
functions to take up less space. Dropping the moves allows for a bit of
assembly magic that produces the same result in 2 and 3 instructions
respectively.
Change-Id: I51608352f23b2244ea7a99e76c10892d257f12bf
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
The existing DSU errata workarounds hijack the errata framework's inner
workings to register with it. However, that is undesirable as any change
to the framework may end up missing these workarounds. So convert the
checks and workarounds to macros and have them included with the
standard wrappers.
The only problem with this is the is_scu_present_in_dsu weak function.
Fortunately, it is only needed for 2 of the errata and only on 3 cores.
So drop it, assuming the default behaviour and have the callers handle
the exception.
Change-Id: Iefa36325804ea093e938f867b9a6f49a6984b8ae
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Clang's nullability completeness checks were triggered after adding
the _Nonnull specifier to one function. Removing it prevents Clang
from flagging atexit() for missing a nullability specifier.
include/lib/libc/stdlib.h:25:25: error: pointer is missing a
nullability type specifier (_Nonnull, _Nullable, or _Null_unspecified)
[-Werror,-Wnullability-completeness]
25 | extern int atexit(void (*func)(void));
This change ensures compliance with the C standard while preventing
unexpected build errors.
Change-Id: I2f881c55b36b692d22c3db22149c6402c32e8c3e
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
* changes:
fix(qemu): statically allocate bitlocks array
feat(qemu): update for renamed struct memory_bank
feat(fvp): increase GPT PPS to 1TB
feat(gpt): statically allocate bitlocks array
chore(gpt): define PPS in platform header files
feat(fvp): allocate L0 GPT at the top of SRAM
feat(fvp): change size of PCIe memory region 2
feat(rmm): add PCIe IO info to Boot manifest
feat(fvp): define single Root region
* changes:
fix(cpus): clear CPUPWRCTLR_EL1.CORE_PWRDN_EN_BIT on reset
chore(docs): drop the "wfi" from `pwr_domain_pwr_down_wfi`
chore(psci): drop skip_wfi variable
feat(arm): convert arm platforms to expect a wakeup
fix(cpus): avoid SME related loss of context on powerdown
feat(psci): allow cores to wake up from powerdown
refactor: panic after calling psci_power_down_wfi()
refactor(cpus): undo errata mitigations
feat(cpus): add sysreg_bit_toggle
Statically allocate 'gpt_bitlock' array of fine-grained
'bitlock_t' data structures in arm_bl31_setup.c.
The amount of memory needed for this array is controlled
by 'RME_GPT_BITLOCK_BLOCK' build option and 'PLAT_ARM_PPS'
macro defined in platform_def.h which specifies the size
of protected physical address space in bytes.
'PLAT_ARM_PPS' takes values from 4GB to 4PB supported by
Arm architecture.
Change-Id: Icf620b5039e45df6828d58fca089cad83b0bc669
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
* changes:
feat(tc): get entropy with PSA Crypto API
feat(psa): add interface with RSE for retrieving entropy
fix(psa): guard Crypto APIs with CRYPTO_SUPPORT
feat(tc): enable trng
feat(tc): initialize the RSE communication in earlier phase
Add the AP/RSS interface for reading the entropy. And update the
document for the API.
Change-Id: I61492d6b5d824a01ffeadc92f9d41ca841ba3367
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Icen Zeyada <Icen.Zeyada2@arm.com>
When building Crypto APIs, it requires dependency on external headers,
e.g., Mbedtls headers. Without the CRYPTO_SUPPORT configuration,
external dependencies are not set up, building Crypto APIs will fail.
Guard Crypto APIs with the CRYPTO_SUPPORT configuration, to make sure
the code is built only for Crypto enabled case.
Change-Id: Iffe1220b0e6272586c46432b4f8d0512cb39b0b5
Signed-off-by: Leo Yan <leo.yan@arm.com>
Neoverse-V3 erratum 3701767 that applies to r0p0, r0p1, r0p2 is
still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2891958/latest/
Change-Id: I5be0de881f408a9e82a07b8459d79490e9065f94
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Neoverse-N3 erratum 3699563 that applies to r0p0 is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-3050973/latest/
Change-Id: I77aaf8ae0afff3adde9a85f4a1a13ac9d1daf0af
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Neoverse-N2 erratum 3701773 that applies to r0p0, r0p1, r0p2 and r0p3
is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-1982442/latest/
Change-Id: If95bd67363228c8083724b31f630636fb27f3b61
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-X925 erratum 3701747 that applies to r0p0, r0p1 and is still
Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/109180/latest/
Change-Id: I080296666f89276b3260686c2bdb8de63fc174c1
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-X4 erratum 3701758 that applies to r0p0, r0p1, r0p2 and r0p3
is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/109148/latest/
Change-Id: I4ee941d1e7653de7a12d69f538ca05f7f9f9961d
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-X3 erratum 3701769 that applies to r0p0, r1p0, r1p1 and r1p2
is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2055130/latest/
Change-Id: Ifd722e1bb8616ada2ad158297a7ca80b19a3370b
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-X2 erratum 3701772 that applies to r0p0, r1p0, r2p0, r2p1
is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-1775100/latest/
Change-Id: I2ffc5e7d7467f1bcff8b895fea52a1daa7d14495
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A725 erratum 3699564 that applies to r0p0, r0p1 and is
fixed in r0p2.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2832921/latest
Change-Id: Ifad1f6c3f5b74060273f897eb5e4b79dd9f088f7
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A720-AE erratum 3699562 that applies to r0p0 and is still
Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-3090091/latest/
Change-Id: Ib830470747822cac916750c01684a65cb5efc15b
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A720 erratum 3699561 that applies to all revisions <= r0p2
and is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2439421/latest/
Change-Id: I7ea3aaf3e7bf6b4f3648f6872e505a41247b14ba
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A715 erratum 3699560 that applies to all revisions <= r1p3
and is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2148827/latest/
Change-Id: I183aa921b4b6f715d64eb6b70809de2566017d31
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A710 erratum 3701772 that applies to all revisions <= r2p1
and is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-1775101/latest/
Change-Id: I997c9cfaa75321f22b4f690c4d3f234c0b51c670
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
When ICH_VMCR_EL2.VBPR1 is written in Secure state (SCR_EL3.NS==0)
and then subsequently read in Non-secure state (SCR_EL3.NS==1), a
wrong value might be returned. The same issue exists in the opposite way.
Adding workaround in EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored. For example, EL3 software should set
SCR_EL3.NS to 1 when saving or restoring the value ICH_VMCR_EL2 for
Non-secure(or Realm) state. EL3 software should clear
SCR_EL3.NS to 0 when saving or restoring the value ICH_VMCR_EL2 for
Secure state.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-1775101/latest/
Change-Id: I9f0403601c6346276e925f02eab55908b009d957
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
- errata.h is using incorrect header macro ERRATA_REPORT_H fix this.
- Group errata function utilities.
Change-Id: I6a4a8ec6546adb41e24d8885cb445fa8be830148
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
To allow for generic handling of a wakeup, this hook is no longer
expected to call wfi itself. Update the name everywhere to reflect this
expectation so that future platform implementers don't get misled.
Change-Id: Ic33f0b6da74592ad6778fd802c2f0b85223af614
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Travis' and Gelas' TRMs tell us to disable SME (set PSTATE.{ZA, SM} to
0) when we're attempting to power down. What they don't tell us is that
if this isn't done, the powerdown request will be rejected. On the
CPU_OFF path that's not a problem - we can force SVCR to 0 and be
certain the core will power off.
On the suspend to powerdown path, however, we cannot do this. The TRM
also tells us that the sequence could also be aborted on eg. GIC
interrupts. If this were to happen when we have overwritten SVCR to 0,
upon a return to the caller they would experience a loss of context. We
know that at least Linux may call into PSCI with SVCR != 0. One option
is to save the entire SME context which would be quite expensive just to
work around. Another option is to downgrade the request to a normal
suspend when SME was left on. This option is better as this is expected
to happen rarely enough to ignore the wasted power and we don't want to
burden the generic (correct) path with needless context management.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I698fa8490ebf51461f6aa8bba84f9827c5c46ad4
The simplistic view of a core's powerdown sequence is that power is
atomically cut upon calling `wfi`. However, it turns out that it has
lots to do - it has to talk to the interconnect to exit coherency, clean
caches, check for RAS errors, etc. These take significant amounts of
time and are certainly not atomic. As such there is a significant window
of opportunity for external events to happen. Many of these steps are
not destructive to context, so theoretically, the core can just "give
up" half way (or roll certain actions back) and carry on running. The
point in this sequence after which roll back is not possible is called
the point of no return.
One of these actions is the checking for RAS errors. It is possible for
one to happen during this lengthy sequence, or at least remain
undiscovered until that point. If the core were to continue powerdown
when that happens, there would be no (easy) way to inform anyone about
it. Rejecting the powerdown and letting software handle the error is the
best way to implement this.
Arm cores since at least the a510 have included this exact feature. So
far it hasn't been deemed necessary to account for it in firmware due to
the low likelihood of this happening. However, events like GIC wakeup
requests are much more probable. Older cores will powerdown and
immediately power back up when this happens. Travis and Gelas include a
feature similar to the RAS case above, called powerdown abandon. The
idea is that this will improve the latency to service the interrupt by
saving on work which the core and software need to do.
So far firmware has relied on the `wfi` being the point of no return and
if it doesn't explicitly detect a pending interrupt quite early on, it
will embark onto a sequence that it expects to end with shutdown. To
accommodate for it not being a point of no return, we must undo all of
the system management we did, just like in the warm boot entrypoint.
To achieve that, the pwr_domain_pwr_down_wfi hook must not be terminal.
Most recent platforms do some platform management and finish on the
standard `wfi`, followed by a panic or an endless loop as this is
expected to not return. To make this generic, any platform that wishes
to support wakeups must instead let common code call
`psci_power_down_wfi()` right after. Besides wakeups, this lets common
code handle powerdown errata better as well.
Then, the CPU_OFF case is simple - PSCI does not allow it to return. So
the best that can be done is to attempt the `wfi` a few times (the
choice of 32 is arbitrary) in the hope that the wakeup is transient. If
it isn't, the only choice is to panic, as the system is likely to be in
a bad state, eg. interrupts weren't routed away. The same applies for
SYSTEM_OFF, SYSTEM_RESET, and SYSTEM_RESET2. There the panic won't
matter as the system is going offline one way or another. The RAS case
will be considered in a separate patch.
Now, the CPU_SUSPEND case is more involved. First, to powerdown it must
wipe its context as it is not written on warm boot. But it cannot be
overwritten in case of a wakeup. To avoid the catch 22, save a copy that
will only be used if powerdown fails. That is about 500 bytes on the
stack so it hopefully doesn't tip anyone over any limits. In future that
can be avoided by having a core manage its own context.
Second, when the core wakes up, it must undo anything it did to prepare
for poweroff, which for the cores we care about, is writing
CPUPWRCTLR_EL1.CORE_PWRDN_EN. The least intrusive for the cpu library
way of doing this is to simply call the power off hook again and have
the hook toggle the bit. If in the future there need to be more complex
sequences, their direction can be advised on the value of this bit.
Third, do the actual "resume". Most of the logic is already there for
the retention suspend, so that only needs a small touch up to apply to
the powerdown case as well. The missing bit is the powerdown specific
state management. Luckily, the warmboot entrypoint does exactly that
already too, so steal that and we're done.
All of this is hidden behind a FEAT_PABANDON flag since it has a large
memory and runtime cost that we don't want to burden non pabandon cores
with.
Finally, do some function renaming to better reflect their purpose and
make names a little bit more consistent.
Change-Id: I2405b59300c2e24ce02e266f91b7c51474c1145f
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
This function doesn't return and its callers that don't return either
rely on this. Drop the dead attribute and add a panic() after it to make
this expectation explicit. Calling `wfi` in the powerdown sequence is
terminal so even if the function was made to return, there would be no
functional change.
This is useful for a following patch that makes psci_power_down_wfi()
return.
Change-Id: I62ca1ee058b1eaeb046966c795081e01bf45a2eb
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
The workarounds introduced in the three patches starting at
888eafa00b assumed that any powerdown
request will be (forced to be) terminal. This assumption can no longer
be the case for new CPUs so there is a need to revisit these older
cores. Since we may wake up, we now need to respect the workaround's
recommendation that the workaround needs to be reverted on wakeup. So do
exactly that.
Introduce a new helper to toggle bits in assembly. This allows us to
call the workaround twice, with the first call setting the workaround
and second undoing it. This is also used for gelas' an travis' powerdown
routines. This is so the same function can be called again
Also fix the condition in the cpu helper macro as it was subtly wrong
Change-Id: Iff9e5251dc9d8670d085d88c070f78991955e7c3
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Introduce a new helper to toggle bits in assembly. This allows us to
call the workaround twice, with the first call setting the workaround
and second undoing it. This allows the (errata) workaround functions to
be used to both apply and undo the mitigation.
This is applied to functions where the undo part will be required in
follow-up patches.
Change-Id: I058bad58f5949b2d5fe058101410e33b6be1b8ba
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
This patch implements SMCCC_ARCH_WORKAROUND_4 and
allows discovery through SMCCC_ARCH_FEATURES.
This mechanism is enabled if CVE_2024_7881 [1] is enabled
by the platform. If CVE_2024_7881 mitigation
is implemented, the discovery call returns 0,
if not -1 (SMC_ARCH_CALL_NOT_SUPPORTED).
For more information about SMCCC_ARCH_WORKAROUND_4 [2], please
refer to the SMCCC Specification reference provided below.
[1]: https://developer.arm.com/Arm%20Security%20Center/Arm%20CPU%20Vulnerability%20CVE-2024-7881
[2]: https://developer.arm.com/documentation/den0028/latest
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I1b1ffaa1f806f07472fd79d5525f81764d99bc79
This patch adds new cpu ops function extra4 and a new macro
for CVE-2024-7881 [1]. This new macro declare_cpu_ops_wa_4 allows
support for new CVE check function.
[1]: https://developer.arm.com/Arm%20Security%20Center/Arm%20CPU%20Vulnerability%20CVE-2024-7881
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I417389f040c6ead7f96f9b720d29061833f43d37
EXTLLC bit in CPUECTLR_EL1(for non-gelas cpus) and in CPUECTLR2_EL1
register for gelas cpu enables external Last-level cache in the system,
External LLC is present on TC4 systems in MCN but it is not enabled in
CPU registers so enable it.
On TC4, Gelas vs Non-Gelas CPUs have different bits to enable EXTLLC
so take care of that as well.
Change-Id: Ic6a74b4af110a3c34d19131676e51901ea2bf6e3
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
On some platforms plat_my_core_pos is a nontrivial function that takes a
bit of time and the compiler really doesn't like to inline. In the PSCI
library, at least, we have no need to keep repeatedly calling it and we
can instead pass it around as an argument. This saves on a lot of
redundant calls, speeding the library up a bit.
Change-Id: I137f69bea80d7cac90d7a20ffe98e1ba8d77246f
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
The target_pwrlvl field in the psci cpu data struct only stores the
highest power domain that a CPU_SUSPEND call affected, and is used to
resume those same domains on warm reset. If the cpu is otherwise OFF
(never turned on or CPU_OFF), then this needs to be the highest power
level because we don't know the highest level that will be off.
So skip the invalidation and always keep the field to the maximum value.
During suspend the field will be lowered to the appropriate value and
then put back after wakeup.
Also, do that in the suspend to standby path as well as it will have
been written before the sleep and it might end up incorrect.
Change-Id: I614272ec387e1d83023c94700780a0f538a9a6b6
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
