* changes:
feat(tc): get entropy with PSA Crypto API
feat(psa): add interface with RSE for retrieving entropy
fix(psa): guard Crypto APIs with CRYPTO_SUPPORT
feat(tc): enable trng
feat(tc): initialize the RSE communication in earlier phase
Add the AP/RSS interface for reading the entropy. And update the
document for the API.
Change-Id: I61492d6b5d824a01ffeadc92f9d41ca841ba3367
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Icen Zeyada <Icen.Zeyada2@arm.com>
When building Crypto APIs, it requires dependency on external headers,
e.g., Mbedtls headers. Without the CRYPTO_SUPPORT configuration,
external dependencies are not set up, building Crypto APIs will fail.
Guard Crypto APIs with the CRYPTO_SUPPORT configuration, to make sure
the code is built only for Crypto enabled case.
Change-Id: Iffe1220b0e6272586c46432b4f8d0512cb39b0b5
Signed-off-by: Leo Yan <leo.yan@arm.com>
Neoverse-V3 erratum 3701767 that applies to r0p0, r0p1, r0p2 is
still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2891958/latest/
Change-Id: I5be0de881f408a9e82a07b8459d79490e9065f94
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Neoverse-N3 erratum 3699563 that applies to r0p0 is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-3050973/latest/
Change-Id: I77aaf8ae0afff3adde9a85f4a1a13ac9d1daf0af
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Neoverse-N2 erratum 3701773 that applies to r0p0, r0p1, r0p2 and r0p3
is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-1982442/latest/
Change-Id: If95bd67363228c8083724b31f630636fb27f3b61
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-X925 erratum 3701747 that applies to r0p0, r0p1 and is still
Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/109180/latest/
Change-Id: I080296666f89276b3260686c2bdb8de63fc174c1
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-X4 erratum 3701758 that applies to r0p0, r0p1, r0p2 and r0p3
is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/109148/latest/
Change-Id: I4ee941d1e7653de7a12d69f538ca05f7f9f9961d
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-X3 erratum 3701769 that applies to r0p0, r1p0, r1p1 and r1p2
is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2055130/latest/
Change-Id: Ifd722e1bb8616ada2ad158297a7ca80b19a3370b
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-X2 erratum 3701772 that applies to r0p0, r1p0, r2p0, r2p1
is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-1775100/latest/
Change-Id: I2ffc5e7d7467f1bcff8b895fea52a1daa7d14495
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A725 erratum 3699564 that applies to r0p0, r0p1 and is
fixed in r0p2.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2832921/latest
Change-Id: Ifad1f6c3f5b74060273f897eb5e4b79dd9f088f7
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A720-AE erratum 3699562 that applies to r0p0 and is still
Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-3090091/latest/
Change-Id: Ib830470747822cac916750c01684a65cb5efc15b
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A720 erratum 3699561 that applies to all revisions <= r0p2
and is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2439421/latest/
Change-Id: I7ea3aaf3e7bf6b4f3648f6872e505a41247b14ba
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A715 erratum 3699560 that applies to all revisions <= r1p3
and is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-2148827/latest/
Change-Id: I183aa921b4b6f715d64eb6b70809de2566017d31
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A710 erratum 3701772 that applies to all revisions <= r2p1
and is still Open.
The workaround is for EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-1775101/latest/
Change-Id: I997c9cfaa75321f22b4f690c4d3f234c0b51c670
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
When ICH_VMCR_EL2.VBPR1 is written in Secure state (SCR_EL3.NS==0)
and then subsequently read in Non-secure state (SCR_EL3.NS==1), a
wrong value might be returned. The same issue exists in the opposite way.
Adding workaround in EL3 software that performs context save/restore
on a change of Security state to use a value of SCR_EL3.NS when
accessing ICH_VMCR_EL2 that reflects the Security state that owns the
data being saved or restored. For example, EL3 software should set
SCR_EL3.NS to 1 when saving or restoring the value ICH_VMCR_EL2 for
Non-secure(or Realm) state. EL3 software should clear
SCR_EL3.NS to 0 when saving or restoring the value ICH_VMCR_EL2 for
Secure state.
SDEN documentation:
https://developer.arm.com/documentation/SDEN-1775101/latest/
Change-Id: I9f0403601c6346276e925f02eab55908b009d957
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
- errata.h is using incorrect header macro ERRATA_REPORT_H fix this.
- Group errata function utilities.
Change-Id: I6a4a8ec6546adb41e24d8885cb445fa8be830148
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
This patch implements SMCCC_ARCH_WORKAROUND_4 and
allows discovery through SMCCC_ARCH_FEATURES.
This mechanism is enabled if CVE_2024_7881 [1] is enabled
by the platform. If CVE_2024_7881 mitigation
is implemented, the discovery call returns 0,
if not -1 (SMC_ARCH_CALL_NOT_SUPPORTED).
For more information about SMCCC_ARCH_WORKAROUND_4 [2], please
refer to the SMCCC Specification reference provided below.
[1]: https://developer.arm.com/Arm%20Security%20Center/Arm%20CPU%20Vulnerability%20CVE-2024-7881
[2]: https://developer.arm.com/documentation/den0028/latest
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I1b1ffaa1f806f07472fd79d5525f81764d99bc79
This patch adds new cpu ops function extra4 and a new macro
for CVE-2024-7881 [1]. This new macro declare_cpu_ops_wa_4 allows
support for new CVE check function.
[1]: https://developer.arm.com/Arm%20Security%20Center/Arm%20CPU%20Vulnerability%20CVE-2024-7881
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I417389f040c6ead7f96f9b720d29061833f43d37
EXTLLC bit in CPUECTLR_EL1(for non-gelas cpus) and in CPUECTLR2_EL1
register for gelas cpu enables external Last-level cache in the system,
External LLC is present on TC4 systems in MCN but it is not enabled in
CPU registers so enable it.
On TC4, Gelas vs Non-Gelas CPUs have different bits to enable EXTLLC
so take care of that as well.
Change-Id: Ic6a74b4af110a3c34d19131676e51901ea2bf6e3
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
Replace the dummy implementation of clk_ops.get_rate with a basic
version that only handles the oscillator objects. Subsequent commits
will add more objects to this list.
Change-Id: I8c1bbbfa6b116fdcf5a1f1353bdb52b474bac831
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
* changes:
perf(psci): pass my_core_pos around instead of calling it repeatedly
refactor(psci): move timestamp collection to psci_pwrdown_cpu
refactor(psci): factor common code out of the standby finisher
refactor(psci): don't use PSCI_INVALID_PWR_LVL to signal OFF state
docs(psci): drop outdated cache maintenance comment
FEAT_MOPS, mandatory from Arm v8.8, is typically managed in EL2.
However, in configurations where NS_EL2 is not enabled,
EL3 must set the HCRX_EL2.MSCEn bit to 1 to enable the feature.
This patch ensures FEAT_MOPS is enabled by setting HCRX_EL2.MSCEn to 1.
Change-Id: Ic4960e0cc14a44279156b79ded50de475b3b21c5
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Initializing all early clocks before the MMU is enabled can impact boot
time. Therefore, splitting the setup into A53 clocks and peripheral
clocks can be beneficial, with the peripheral clocks configured after
fully initializing the MMU.
Change-Id: I19644227b66effab8e2c43e64e057ea0c8625ebc
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add all clock modules as entries in MMU using dynamic regions.
Change-Id: I56f724ced4bd024554c7b38afd14ea420de80cc6
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
On some platforms plat_my_core_pos is a nontrivial function that takes a
bit of time and the compiler really doesn't like to inline. In the PSCI
library, at least, we have no need to keep repeatedly calling it and we
can instead pass it around as an argument. This saves on a lot of
redundant calls, speeding the library up a bit.
Change-Id: I137f69bea80d7cac90d7a20ffe98e1ba8d77246f
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
The target_pwrlvl field in the psci cpu data struct only stores the
highest power domain that a CPU_SUSPEND call affected, and is used to
resume those same domains on warm reset. If the cpu is otherwise OFF
(never turned on or CPU_OFF), then this needs to be the highest power
level because we don't know the highest level that will be off.
So skip the invalidation and always keep the field to the maximum value.
During suspend the field will be lowered to the appropriate value and
then put back after wakeup.
Also, do that in the suspend to standby path as well as it will have
been written before the sleep and it might end up incorrect.
Change-Id: I614272ec387e1d83023c94700780a0f538a9a6b6
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
* changes:
feat(el3_spmc): ffa error handling in direct msg
feat(ff-a): support FFA_MSG_SEND_DIRECT_REQ2/RESP2
feat(ff-a): add FFA_MEM_PERM_GET/SET_SMC64
feat(el3-spmc): support Hob list to boot S-EL0 SP
feat(synquacer): add support Hob creation
fix(fvp): exclude extend memory map TZC regions
feat(fvp): add StandaloneMm manifest in fvp
feat(spm): use xfer list with Hob list in SPM_MM
StandaloneMm which is S-EL0 partition uses
FFA_MSG_SEND_DIRECT_REQ2/RESP2 to handle multiple services.
For this, add support for FFA_MSG_SEND_DIRECT_REQ2/RESP2 in el3_spmc
restrictly up to use 8 registers.
although FF-A v1.2 defines FFA_MSG_SEND_DIRECT_REQ2/RESP2
with ability to pass/return up to 18 registers.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Change-Id: I8ab1c332d269d9d131330bb2debd10d75bdba1ee
* changes:
feat(qemu): hand off TPM event log via TL
feat(handoff): common API for TPM event log handoff
feat(handoff): transfer entry ID for TPM event log
fix(qemu): fix register convention in BL31 for qemu
fix(handoff): fix register convention in opteed
SMCCC_ARCH_FEATURE_AVAILABILITY [1] is a call to query firmware about
the features it is aware of and enables. This is useful when a feature
is not enabled at EL3, eg due to an older FW image, but it is present in
hardware. In those cases, the EL1 ID registers do not reflect the usable
feature set and this call should provide the necessary information to
remedy that.
The call itself is very lightweight - effectively a sanitised read of
the relevant system register. Bits that are not relevant to feature
enablement are masked out and active low bits are converted to active
high.
The implementation is also very simple. All relevant, irrelevant, and
inverted bits combined into bitmasks at build time. Then at runtime the
masks are unconditionally applied to produce the right result. This
assumes that context managers will make sure that disabled features
do not have their bits set and the registers are context switched if
any fields in them make enablement ambiguous.
Features that are not yet supported in TF-A have not been added. On
debug builds, calling this function will fail an assert if any bits that
are not expected are set. In combination with CI this should allow for
this feature to to stay up to date as new architectural features are
added.
If a call for MPAM3_EL3 is made when MPAM is not enabled, the call
will return INVALID_PARAM, while if it is FEAT_STATE_CHECK, it will
return zero. This should be fairly consistent with feature detection.
The bitmask is meant to be interpreted as the logical AND of the
relevant ID registers. It would be permissible for this to return 1
while the ID returns 0. Despite this, this implementation takes steps
not to. In the general case, the two should match exactly.
Finally, it is not entirely clear whether this call replies to SMC32
requests. However, it will not, as the return values are all 64 bits.
[1]: https://developer.arm.com/documentation/den0028/galp1/?lang=en
Co-developed-by: Charlie Bareham <charlie.bareham@arm.com>
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I1a74e7d0b3459b1396961b8fa27f84e3f0ad6a6f
In preparation for SMCCC_ARCH_FEATURE_AVAILABILITY, it is useful for
context to be directly related to the underlying system. Currently,
certain bits like SCR_EL3.APK are always set with the understanding that
they will only take effect if the feature is present.
However, that is problematic for SMCCC_ARCH_FEATURE_AVAILABILITY (an
SMCCC call to report which features firmware enables), as simply reading
the enable bit may contradict the ID register, like the APK bit above
for a system with no Pauth present.
This patch is to clean up these cases. Add a check for PAuth's presence
so that the APK bit remains unset if not present. Also move SPE and TRBE
enablement to only the NS context. They already only enable the features
for NS only and disable them for Secure and Realm worlds. This change
only makes these worlds' context read 0 for easy bitmasking.
There's only a single snag on SPE and TRBE. Currently, their fields have
the same values and any world asymmetry is handled by hardware. Since we
don't want to do that, the buffers' ownership will change if we just set
the fields to 0 for non-NS worlds. Doing that, however, exposes Secure
state to a potential denial of service attack - a malicious NS can
enable profiling and call an SMC. Then, the owning security state will
change and since no SPE/TRBE registers are contexted, Secure state will
start generating records. Always have NS world own the buffers to
prevent this.
Finally, get rid of manage_extensions_common() as it's just a level of
indirection to enable a single feature.
Change-Id: I487bd4c70ac3e2105583917a0e5499e0ee248ed9
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Create a common BL2 API to add a TE for TPM event log.
Change-Id: I459e70f40069aa9ea0625977e0bad8ec316439e6
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
SPE and TRBE don't have an outright EL3 disable, there are only
constraints on what's allowed. Since we only enable them for NS at the
moment, we want NS to own the buffers even when the feature should be
"disabled" for a world. This means that when we're running in NS
everything is as normal but when running in S/RL then tracing is
prohibited (since the buffers are owned by NS). This allows us to fiddle
with context a bit more without having to context switch registers.
Change-Id: Ie1dc7c00e4cf9bcc746f02ae43633acca32d3758
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
FF-A memory management protocol v1.1 specifies not only
FFA_MEM_PERM_GET_SMC32/FFA_MEM_PERM_SET_SMC32 but also
FFA_MEM_PERM_GET_SMC64/FFA_MEM_PERM_SET_SMC64.
Change former FFA_MEM_PERM_GET/SET definitions to separate operations
and add handler for FFA_MEM_PERM_GET/SET_SMC64 in spmc_smc_handler().
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Change-Id: I175063654703db26c1ffc3cfd7fa428b94d2bfc9
This is a small change adding accessor functions for the Debug Power
Control register (DBGPRCR_EL1) to the common architectural helpers.
Change-Id: I72261fbf0395d900347b46af320093ed946aa73d
Signed-off-by: Chris Kay <chris.kay@arm.com>
Set MBEDTLS_SHA256_SMALLER as the default mbedTLS configuration
to minimize memory usage, trading off some processing speed for
a smaller footprint.
Change-Id: Ibfa6e115a0ed94096b9acdd9e237f3fb5457071d
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This variable had a misleading name, as it is the length
of the header only when the ROTPK is a hash.
Also rename arm_rotpk_header to match the new pattern.
Change-Id: I36c29998eebf50c356a6ca959ec9223c8837b540
Signed-off-by: Ryan Everett <ryan.everett@arm.com>
No longer hard code SHA-256 hashed dev rotpks, instead
use the algorithm given by HASH_ALG. This means that
we no longer need the plat_arm_configs (once the protpk and
swd_rotpk are also updated to use HASH_ALG).
The rot public key is now generated at build time, as is
the header for the key.
Also support some default 3k and 4k RSA keys.
Change-Id: I33538124aeb4fa7d67918d878d17f2a84d3a6756
Signed-off-by: Ryan Everett <ryan.everett@arm.com>
