This patch incorporates the changes for Drage GPU to uses new access
window interface "IRQ_AW". As the interrupt properties are different
between TC4 and other TC platforms, this patch appends the interrupt
properties in platform specific DT binding file.
Change-Id: I2ca505846f03ce64b8e5f02fd202962dbfe39f25
Signed-off-by: Leo Yan <leo.yan@arm.com>
The TC4 uses a new RoS (Virtual Peripherals) and places them at
different address to that in TC3. Add these addresses to the DTS.
Change-Id: Ia62a670e47cdc98b3c113a670a21edc65905cafe
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Since TC3 and TC4 share most components in the hardware design, they can
reuse the device tree binding. For this reason, this patch extracts the
common modules from tc3.dts and put into the file tc3-4-based.dtsi.
As a result, a new created tc4.dts file includes tc3-4-based.dtsi for
support DT binding for the TC4 platform.
Change-Id: Ib7497162cb131d94a722aeaa14a1a37fb0095829
Signed-off-by: Leo Yan <leo.yan@arm.com>
CPU PMU types are not same for all CPUs on TC platforms, so define the
PMU nodes per micro architectures.
Change-Id: I4e940976cdda9a6eab3e15936c6c41a2bb668c9d
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Add node for Statistical Profiling Extension, which provides
periodic sampling of operations in the CPU pipeline and reports
this via the perf AUX interface.
Change-Id: Ic7a9d9ce927edbce02c7c09470a009dc56247240
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Define ppi-partitions for little, middle, and big cpu groups. PPI
affinity is expressed as a single "ppi-partitions" node, containing a
set of sub-nodes for each microarchitecture type, each with the
property 'affinity' which should be a list of phandles to CPU nodes.
PPI paritions are useful to affine specific PPI with set of CPUs
so that the drivers of micro-architecture specific nodes which uses
PPI can be divided based on CPU list e.g. SPE-PMU, CPU-PMU etc.
Change-Id: If7d47f71387ac982d2d992a0ce2de1652d564bd6
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Enable NI-Tower PMU on TC3.
Change-Id: I8a4d4e31e84ab33f95bc8b7661e873cf97561b79
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Add DT binding for Arm DSU PMU node.
Change-Id: Iadfb5d3bb3f69c7a771516180d1c165e60eef51d
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
The SMMU 600 is used on TC3 FPGA board with the display device, add the
device tree binding for it.
Change-Id: Iadf85873720ca47bbbda999aa7b18a9db98ae945
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
TC3 adds a new SMMU-700 specifically for the DPU. This is used as the
DPU SMMU instead of the existing SMMU used for the DPU. Update the
device tree to reflect this.
Change-Id: I865140f8f53bceaa8849f6583190b240eeee0539
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
The usage for SMMU-700 is not consistent across TC platforms:
SMMU-700 on TC2:
| FVP | FPGA
--------+-------+------
Display | Used | Used
GPU | Used | Used
SMMU-700 on TC3:
| FVP | FPGA
--------+-------+------
Display | No | No
GPU | Used | No
This commit changes to use append mode for SMMU-700 to bind it on TC2
and TC3 separately. As a result, the TC_IOMMU_EN configuration is not
used, remove it.
Change-Id: Ic4152eb4c8ef97bf27b8a97c3c6cb86e32a2e8eb
Signed-off-by: Leo Yan <leo.yan@arm.com>
TC3 has 4 MCN instances, each of them have PMU registers to count
different MCN cache access events, add entries for MCN PMU so that Linux
MCN PMU perf driver can be used with perf.
Change-Id: I7e0ac5025231c3f19d5291292d4cae186accc544
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
TC2 and TC3 have different the scmi shared memory regions and MHU
parameters, this patch appends the properties in scmi node for TC2 and
TC3 respectively.
Change-Id: Ifd001f780b575987877b4be36eb755a9dbe57e60
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
MHUv3's device tree is different from MHUv2's. Add support MHUv3 DT
binding for TC3 while keeping TC2 as-is.
Change-Id: Ib2f55d3a64a4cfe2ea9e62fe39d27ed54a2ca007
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
A Total Compute platform supports FVP and FPGA target. And it's possible
that these two targets have different hardware components. For this
reason, this patch introduces a new file tc-fpga.dtsi for FPGA related
DT binding.
As a result, this patch moves out FVP and FPGA specific macros into
tc-fvp.dtsi and tc-fpga.dtsi respectively.
Change-Id: I48d7d30d0c500cec5500f1a2a680e8b3a276ea99
Signed-off-by: Leo Yan <leo.yan@arm.com>
The main purpose of 'tc-base.dtsi' is for common DT bindings, however,
it contains bindings for platform specific.
This patch moves out these plaform specific bindings to 'tc2.dts' and
'tc3.dts' respectively.
Change-Id: I9355eeff539a3f2940190aef399b4fb4828cbbac
Signed-off-by: Leo Yan <leo.yan@arm.com>
Since now every TC board has its own dts file, this patch moves out the
platform specific code from tc_vers.dtsi to the corresponding platform
dts file.
Change-Id: I62e0872eddb2ae18e666a3f8dc0118a539651a9c
Signed-off-by: Leo Yan <leo.yan@arm.com>
Currently, the DT binding uses the file 'tc.dts' as a central place for
all TC platforms. And the variables (for different platforms, or FVP vs
FPGA, etc.) are maintained in 'tc_vers.dtsi'.
This patch renames 'tc.dts' to 'tc-base.dtsi' and creates an individual
.dts file for every platform. The purpose is to use 'tc-base.dtsi' for
maintaining common DT binding and every platform's specific definitions
will be moved into its own .dts file. This is a preparation for
sequential refactoring.
It changes to include the header files in platform DTS files but not in
the 'tc-base.dtsi'. This can allow 'tc-base.dtsi' is general enough and
platform DTS files covers platform specific defintions.
Change-Id: I034fb3f8836bcea36e8ad8ae01de41127693b0c6
Signed-off-by: Leo Yan <leo.yan@arm.com>
