Changed reg_clr to use the base address + RPI3_GPIO_GPCLR,
this corrects the reg_clr address.
Signed-off-by: Tushar Khandelwal <tushar.khandelwal@arm.com>
Signed-off-by: Abhi Singh <abhi.singh@arm.com>
Change-Id: I9ca50905efd4c640f143783c5a00676b246a2e26
Before this change, the internal oscillator clocked the UART with a
frequency of 48MHz. With the necessary support added, the UART clock
rate is increased to 125MHz by changing the clock source from FIRC to
PERIPH PLL PHI3.
Change-Id: I3160dc6860ebf441c9bea8eaf9d8d12de48bd647
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Peripheral PLL is one of the platform's PLLs, providing a clock for
peripherals such as UART, QSPI, uSDHC, SPI and CAN. Its source can be
either the FIRC or FXOSC oscillators. It has eight outputs (PHIs) and
their frequencies can be controlled programmatically using output
dividers. An additional output clocks the PERIPH DFS using the VCO
frequency of the PERIPH PLL.
Change-Id: I637294b2da94f35e95dc1750dad36c129a276bb9
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Implement a flush callback for the Linflex UART driver to avoid cases
where the BL31 stage reinitializes the console while there is ongoing TX
initiated by the BL2.
Change-Id: Ic49852f809198362de1f993474c7c45f1439dc98
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Per GIC architecture version 3 and version 4, Where the GICR_CTRL.EnableLPIs
remains programmable:
- Software must observe GICR_CTLR.RWP==0 after clearing GICR_CTLR.EnableLPIs
from 1 to 0 before writing GICR_PENDBASER or GICR_PROPBASER, otherwise
behavior is UNPREDICTABLE.
- Software must observe GICR_CTLR.RWP==0 after clearing GICR_CTLR.EnableLPIs
from 1 to 0 before setting GICR_CTLR.EnableLPIs to 1, otherwise behavior is
UNPREDICTABLE.
After changing EnableLPIs from 1 to 0, wait RWP got cleared, otherwise
setting EnableLPIs from 0 to 1 may fail.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Tested-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I6aaf96dc9984376de9399d0dac8a8504ba095149
Create a DDR helper files, and add a function to enable DDR clocks
in RCC_DDRCPCFGR register.
Call this ddr_sub_system_clk_init() just before clock driver init,
as it needs to be done before enabling DDR PLL clock (PLL2).
Change-Id: I365d6aa034363d0c036ce2d9f944f077ba86e193
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* changes:
feat(nxp-clk): enable the XBAR clock
feat(nxp-clk): add dependencies for the XBAR clock
feat(nxp-clk): add CGM0 instance
feat(nxp-clk): add DFS module enablement
feat(nxp-clk): add clock objects for ARM DFS
refactor(nxp-clk): organize early clocks in groups
Enable the XBAR clock, which is the primary system clock.
Change-Id: Idaafbb8894472b10e1ed8a35b25967c82106e667
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add all clock modules required to enable the XBAR clock, including the
DFS, its output dividers and MC_CGM muxes.
Change-Id: Ib9cf82c0e40b76863637ed7602c3a09411d17615
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Introduce the MC_CGM0 instance responsible for XBAR and other peripheral
clocks.
Change-Id: Icf1e9ce6e71e4ff446835d1e7b6522bfb6f2b4b6
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
This reduces the length of the s32cc_init_early_clks function and offers
space for more early clocks to be added.
Change-Id: I0d11b97779433a6b15cd76c36aefbb7b92381067
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
There is no need for the bl2 static c file for
CCA and Duaroot CoT, remove them from the repo
Change-Id: I251d085034dae0f6b3c6cefdbb129a9e1dd0530b
Signed-off-by: Xialin Liu <Xialin.Liu@ARM.com>
Separate the bl1 and bl2 CoT into individual C files for the
upcoming tool, i.e. the CoT device tree-to-source file generator.
Change-Id: I0d24791991b3539c7aef9a562920dc62fecdc69a
Signed-off-by: Xialin Liu <Xialin.Liu@ARM.com>
* changes:
feat(nxp-clk): enable the A53 clock
feat(nxp-clk): add ARM PLL ODIV enablement
feat(nxp-clk): add ARM PLL enablement
feat(nxp-clk): set rate for clock muxes
The GICR_WAKER.Sleep and GICR_WAKE.Quiescent functionality is solely
about flushing out the LPI cache and ensuring that the contents are
consistent with external memory.
Hence, as shown in GIC-700 TRM version r3p0, software must poll for
Quiescent bit only if LPIs are supported.
Change-Id: I7d69b208428e24d8a3ff30e81bd1a8ee3d0bda6e
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This new version uses fewer internal functions
in favour of calling equivalent mbedtls APIs.
Change-Id: I0c2c20a74687211f2d554501f57898da07b01739
Signed-off-by: Ryan Everett <ryan.everett@arm.com>
Enable the A53 clock at 1GHz, the maximum frequency on S32G2 SoCs.
Change-Id: Ife96792faf8f3f46965bdcf4df75fcca5e39dc6e
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Enable the PLL dividers using their memory-mapped interface. Otherwise,
the clock will not be propagated to downstream clock modules.
Change-Id: I39115cb2cb754cee87d7b6b4aa7502c3f1ef37ce
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add the low-level implementation to enable the ARM PLL oscillator, which
is disabled by default when booting the SoC. It will be used by PLL
diviers, for which support will be added later.
Change-Id: I964fa7374ea9a08c695009176eade01003c1d6c2
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The clock muxes will simply pass the set rate request to the clock
module connected to its source, as they do not alter the frequency.
Change-Id: I5fda8fffa0f46a4be96deac4d6a5a880c9f86ccf
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add set rate support for fixed divider clock modules of whose role is to
reduce the source frequency by a factor.
Change-Id: I8a29a2c5b1a829db0c396407c3517c9e66caaa93
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
These objects are needed to allow early enablement of the A53 core
clock.
Change-Id: I44d81975c8eba8cc6cfd18aeb6c9b324edaa3f01
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add implementation for ARM PLL divider rate set mechanism.
Change-Id: I78f4418bcbb5ea0a6ef64675e44bd074d2230ea3
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add implementation for ARM PLL rate set mechanism.
Change-Id: Ic859567bd67747f173d425158cdc581801f7446c
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Set the parent for ARM PLL and MC_CGM muxes as part of the early clocks
enablement.
Change-Id: If88186caad520c3f7bb1fb602de526d940037a1c
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The MC_CGM1 clock objects will participate in A53 clocking.
Change-Id: I7309b630d72ac0ad66df7c299b678454220e0581
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
On S32CC SoCs, the set_parent operation will be used on clock modules
that are mux instances in order to establish the clock source. This will
be used for PLLs and MC_CGM muxes.
Change-Id: I7228d379500ea790459b858da8fc0bdcbed4fd62
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add all the clock objects needed to describe the ARM PLL, which can be
powered by either FXOSC or FIRC oscillators.
Change-Id: I2585ed38178ca1d5c5485adb38af1b3b8d94f1f6
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add the low-level implementation to enable the FXOSC oscillator, which
is disabled by default when booting the SoC. It will be used by PLLs,
for which support will be added later.
Change-Id: Ie784e4e29b8b4453b39d37594c311af940bebf92
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
load_mbr_header() casts an unaligned pointer to (mbr_entry_t *) then
dereferences struct members with non-trivial alignment requirements.
This causes a bl2 with BOOT_DEVICE=emmc to hang when compiled with clang
18.1.5, although it works when compiled with gcc 14.1.0. Presumably gcc's
-mstrict-align papers over the undefined behaviour whereas clang's doesn't.
Replace the unaligned cast with a safe memcpy() into an mbr_entry_t.
Signed-off-by: Chris Webb <chris@arachsys.com>
Change-Id: Iefd4dac7e390ddf369b8dacdbaf14e599118f91d
The target_locality attribute is meant to specify that
a certain SW component is expected to run and thereby
send DPE commands from a given security domain. The DPE
service must be capable of determining the locality of
a client on his own. RSE determines the client's locality
based on the MHU channel used for communication.
If the expected locality (specified by the parent component)
is not matching with the determined locality by DPE
service then command fails.
The goal is to protect against spoofing when a
context_handle is stolen and used by a component
that should not have access.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: I96d255de231611cfed10eef4335a47b91c2c94de
s32cc_init_early_clks will be used to increase the frequency of the
clocks which have a performance impact on BL2 boot. This set includes
A53, XBAR, DDR and Linflex clocks. For now, it will only contain the
frequency set for FXOSC. More clock management will be added in the next
commits.
Change-Id: Ie85465884de02f5082185f91749f190f40249c2e
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The set_rate callback will now be applied to FIRC, FXOSC, and SIRC
oscillators. It is a prerequisite for the upcoming commits that will
utilize this capability.
Change-Id: I82d1545c63b3e15497c1c002ff9ec0d7bf990aa0
Signed-off-by: Ciprian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The oscillator clock objects will be used to describe the FIRC, FXOSC,
and SIRC clocks, all of which are oscillators on S32CC SoCs.
Change-Id: Icf235cc9b8f1d95d2c0051ce9a7655fd120289b8
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The clock IDs are organized into categories, which are determined based
on the first 2 MSB bits for each ID. Currently, there are two big
categories: hardware and software-defined clocks.
The first category refers to clock IDs understood by the S32CC PLL muxes
and MC_CGM module muxes and is immutable. The last category of the
clocks includes software-defined IDs for clocks to allow an easy
representation of the hierarchy.
Change-Id: Idc079feb3ca5f92d8bf337ef09efad006e267088
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
After disabling assertion with -DENABLE_ASSERTIONS=0, the build reports
error:
drivers/arm/mhu/mhu_wrapper_v3_x.c: In function 'mhu_get_max_message_size':
drivers/arm/mhu/mhu_wrapper_v3_x.c:448:31: error: variable 'err' set but not used [-Werror=unused-but-set-variable]
enum mhu_v3_x_error_t err;
^~~
This commit fixes the building failure by making the variable 'err' as
__maybe_unused.
Change-Id: I338e6df03d2f0805c83e96d8e3a4abae41e68678
Signed-off-by: Leo Yan <leo.yan@arm.com>
