In order to support a platform without MHU in RSE, update the flag
PLAT_MHU_VERSION. It is renamed PLAT_MHU and can take the following
entries: NO_MHU, MHUv1, MHUv2, MHUv3...
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ia72e590088ce62ba8c9009f341b6135926947bee
Disable the debug flag from the driver to reduce debugging messages.
Change-Id: I9444f64acbf684debab56d8226b14c6c01200ea4
Signed-off-by: Gavin Liu <gavin.liu@mediatek.com>
Wait for it to have been created. This is the same issue as
commit db69d11829.
Change-Id: I32bd0c713e2837563d32131fb0beddb5533c0792
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
UART_IMAGE is not set when WTP isn't. The error rules will then provide
a recipe for $(BUILD_PLAT). When building with a lot of cores (64) this
rule might be called before the directory is made, causing a build
failure.
Hoist the definition so that the depended path is correct.
Change-Id: I167e7398e576e667d0c5c1fc0f07ab8c8ef939a8
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
* changes:
fix(cpus): clear CPUPWRCTLR_EL1.CORE_PWRDN_EN_BIT on reset
chore(docs): drop the "wfi" from `pwr_domain_pwr_down_wfi`
chore(psci): drop skip_wfi variable
feat(arm): convert arm platforms to expect a wakeup
fix(cpus): avoid SME related loss of context on powerdown
feat(psci): allow cores to wake up from powerdown
refactor: panic after calling psci_power_down_wfi()
refactor(cpus): undo errata mitigations
feat(cpus): add sysreg_bit_toggle
gpt_runtime_init() now takes the bitlock array's address and size as
argument. Rather than reserving space at the end of the L0 GPT for
storing bitlocks, allocate a static array and pass its address to
gpt_runtime_init(). This frees up a little bit of space formerly
reserved for alignment of the GPT.
Change-Id: I48a1a2bc230f64e13e3ed08b18ebdc2d387d77d0
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
The struct ns_dram_bank has been renamed to struct memory_bank, so
update plat/qemu accordingly.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Change-Id: If5ed92edd132c977009a7371ec53eca0ee35ef00
- Increase PPS for FVP from 64GB to 1TB.
- GPT L0 table for 1TB PPS requires 8KB memory.
- Set FVP_TRUSTED_SRAM_SIZE to 384 with ENABLE_RME=1
option.
- Add 256MB of PCIe memory region 1 and 3GB of
PCIe memory region 2 to FVP PAS regions array.
Change-Id: Icadd528576f53c55b5d461ff4dcd357429ba622a
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Statically allocate 'gpt_bitlock' array of fine-grained
'bitlock_t' data structures in arm_bl31_setup.c.
The amount of memory needed for this array is controlled
by 'RME_GPT_BITLOCK_BLOCK' build option and 'PLAT_ARM_PPS'
macro defined in platform_def.h which specifies the size
of protected physical address space in bytes.
'PLAT_ARM_PPS' takes values from 4GB to 4PB supported by
Arm architecture.
Change-Id: Icf620b5039e45df6828d58fca089cad83b0bc669
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
This patch allocates level 0 GPT at the top of SRAM
for FVP. This helps to meet L0 GPT alignment requirements
and prevent the occurrence of possible unused gaps in SRAM.
Load addresses for FVP TB_FW, SOC_FW and TOS_FW DTBs are
defined in fvp_fw_config.dts via ARM_BL_RAM_BASE macro.
Change-Id: Iaa52e302373779d9fdbaf4e1ba40c10aa8d1f8bd
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
- Add PCIe and SMMUv3 related information to DTS for
configurations with ENABLE_RME=1.
- Add entries for PCIe IO memory regions to Boot manifest
- Update RMMD_MANIFEST_VERSION_MINOR from 3 to 4.
- Read PCIe related information from DTB and write it to
Boot manifest.
- Rename structures that used to describe DRAM layout
and now describe both DRAM and PCIe IO memory regions:
- ns_dram_bank -> memory_bank
- ns_dram_info -> memory_info.
Change-Id: Ib75d1af86076f724f5c330074e231f1c2ba8e21d
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
For FVP model define single Root PAS which
includes EL3 DRAM data, L1 GPTs and SCP TZC.
This allows to decrease the number of PAS
regions passed to GPT library and use GPT
mapping with Contiguous descriptor of
larger block size.
Change-Id: I70f6babaebc14e5e0bce033783ec423c8a26c542
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Support Agilex5 B0 jtag id for fpga reconfig.
Change-Id: I4efb5a046a0f11009a1f08412ff0e48f376c94e1
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This patch will enable vcore dvfsrc.
- VCORE DVFS is the feature to change VCORE/DDR Freq for power saving
- When there are no requests for using Vcore/DRAM, Vcore DVFS will
- lower the voltage and frequency of Vcore/DRAM to achieve power saving.
Signed-off-by: Kunlong Wang <kunlong.wang@mediatek.corp-partner.google.com>
Change-Id: I972eb2da1b8526f4ce2927cd662a6fc3ef2f2401
Now that all errata flags are all conveniently in a single list we can
make sweeping decisions about their values. The first use-case is to
enable all errata in TF-A. This is useful for CI runs where it is
impractical to list every single one. This should help with the long
standing issue of errata not being built or tested.
Also add missing CPUs with errata to `ENABLE_ERRATA_ALL` to enable all
errata builds in CI.
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I2b456d304d7bf3215c7c4f4fd70b56ecbcb09979
* changes:
feat(rdv3): enable the support to fetch dynamic config
feat(rdv3): add dts files to enable hafnium as BL32
feat(rdv3): define SPMC manifest base address
feat(arm): add a macro for SPMC manifest base address
feat(rdv3): add carveout for BL32 image
feat(rdv3): introduce platform handler for Group0 interrupt
feat(neoverse-rd): use larger stack size when S-EL2 spmc is enabled
fix(neoverse-rd): set correct SVE vector lengths
PSCI OS initiated is usually implemented with the extended state id
format, however this does not have to be the case. When this is the
case, the original format will carry the requested power level in
the PowerLevel field. To validate that the requested power state is
valid we must save it so that later when we call
psci_is_last_cpu_to_idle_at_pwrlvl() it checks the right level (instead
of a default 0).
This came up when testing 01959a1656 for
all configurations.
Change-Id: Iaab88c1910467282ae524861446283acddd9d977
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
This region is defined in LPM driver. Prefer managing this region in
LPM driver and remove it from plat_mmap and platform_def.h.
Change-Id: I57bfaad88a28d4f29e2b132ba080bc7d5b8248d8
Signed-off-by: Gavin Liu <gavin.liu@mediatek.com>
Update missing SiP SCM ID definitions. Those definitons are required
when linking to the proprietary library.
Change-Id: I6b912cee9bcceac774ff2228a1e335073a1d5ea7
Signed-off-by: Yidi Lin <yidilin@chromium.org>
These changes align the project with the latest directory structure
and ensure consistency in header references.
Signed-off-by: Wenzhen Yu <wenzhen.yu@mediatek.com>
Change-Id: I7f3c42cbd9a803064bbfed67cd8f309638da8441
To enable the support to load Hafnium as BL32, BL31 needs firmware
configuration info to get BL32 manifest load location. The load address
of BL32 is passed via firmware config info.
Add the support to get the address using fconf framework from dynamic
config info.
Signed-off-by: Nishant Sharma <nishant.sharma@arm.com>
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: I3a2a5706789ed290dc7f4a67e62e03751b930c02
On RD-V3 platform and variants, Hafnium is used as SPMC running at
S-EL2 and manage SP running at S-EL0. Hafnium is loaded and configured
as BL32 image. SP is loaded by SP load framework and configured by
Hafnium.
Add the dts files needed to enable load and configuration of hafnium and
SP.
Signed-off-by: Nishant Sharma <nishant.sharma@arm.com>
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: I7de72052323ff9106d7bedbaaf5ece3272e9a6cd
ARM_SPMC_MANIFEST_BASE defines the base address of the SPMC manifest
used by BL32. In the non-RESET_TO_BL31 case, it is defined relative to
the top of Trusted SRAM. However, for RESET_TO_BL31, the
PLAT_ARM_SPMC_MANIFEST_BASE macro can be used to set it to a different
location which is then used to populate ARM_SPMC_MANIFEST_BASE.
As the RD-V3 platform and its variants have a different SRAM layout
compared to that defined in arm_def.h, define the
PLAT_ARM_SPMC_MANIFEST_BASE macro to an address suitable for this
platform and its variants.
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: I36e1eb21ab3d1c68bddb52c62198fcdfc40d8993
In RESET_TO_BL31, the SPMC manifest base address that is utilized by
bl32_image_ep_info has to be statically defined as DT is not available.
Common arm code sets this to the top of SRAM using macros but it can be
different for some platforms. Hence, introduce the macro
PLAT_ARM_SPMC_MANIFEST_BASE that could be re-defined by platform as per
their use-case. Platforms that utilize arm_def.h would use the existing
value from arm common code.
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: I4491749ad2b5794e06c9bd11ff61e2e64f21a948
Added `-Wl,--whole-archive` option to the LDLIBS in the platfrom.mk to
ensure that the symbols within the library are not stripped during the
linking process.
Change-Id: I35c728d3ccc98489183285a96f703e02dc7505d3
Signed-off-by: Gavin Liu <gavin.liu@mediatek.com>
Edk2 converts StMM GUID to UUID format, which is used in FF-A and linux
kernel. StMM manifest currently provides GUID format. Correcting this to
UUID format.
Change-Id: Ie94728e5ea74d3d9935e0af9a2a601cbafe5ad3d
Signed-off-by: Jerry Wang <Jerry.Wang4@arm.com>
* changes:
feat(tc): get entropy with PSA Crypto API
feat(psa): add interface with RSE for retrieving entropy
fix(psa): guard Crypto APIs with CRYPTO_SUPPORT
feat(tc): enable trng
feat(tc): initialize the RSE communication in earlier phase
Add and map the carveout for loading Hafnium as BL32 image. Also define
PLAT_ARM_SP_MAX_SIZE as 3 MB for secure partitions.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Signed-off-by: Nishant Sharma <nishant.sharma@arm.com>
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: I2845eb6807a127c9f6b92de2dabc9a58d25bd4d4
This patch introduces a handler for RD-V3 variants to handle Group0
secure interrupts. Currently, it is empty but serves as a placeholder
for future Group0 interrupt sources.
Signed-off-by: Nishant Sharma <nishant.sharma@arm.com>
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: Ifa418094f6075a6cdc33e63eec1825103bbf6d68
Larger stack size is needed when S-EL2 SPMC is enabled. This is required
because BL31 xlat map framework makes more nested calls when this
feature is enabled.
Signed-off-by: Nishant Sharma <nishant.sharma@arm.com>
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: Ib3f2abf38b576ba96402dab4ba995d8b648b4cc7
Affected platforms: RD-N2, RD-V1, RD-V1-MC, RD-V3 and their
configurations.
Previously, the SVE vector lengths for these platforms were
being taken from the default configuration. This commit updates
their respective platform.mk files to specify the correct vector
lengths.
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: I8919257e2cec5c0e819424ff44a623dc3ab1a368
The PSA Crypto API is available with sending messages to RSE. Change
to invoke PSA Crypto API for getting entropy.
Change-Id: I4b2dc4eb99606c2425b64949d9c3f5c576883758
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Icen Zeyada <Icen.Zeyada2@arm.com>
Enable the trng on the platform, which can be used by other features.
`rng-seed` has been removed and enabled `FEAT_RNG_TRAP` to trap to EL3
when accessing system registers RNDR and RNDRRS
Change-Id: Ibde39115f285e67d31b14863c75beaf37493deca
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Icen Zeyada <Icen.Zeyada2@arm.com>
