Adding PSA Crypto MBedTLS specific jump table to allow use of ROMLIB, to
be included when PSA_CRYPTO=1 and enabled.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Iff7f0e3c5cba6b89f1732f6c80d3060498e3675d
"regul" corresponds to a specific part of a global table that can't be
undefined. Thus, checking if it is NULL is useless.
Issue found by Coverity (CID 445089).
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: Ic812bc1fde12fe8389677c7c72fb85246c50f5c9
Patch series:
https://review.trustedfirmware.org/q/topic:%22gr/fvp_11_28_23%22
Migrated FVP's to use version 11.28.23 and also removed some model
testing that are now no more available or not working with newer model
configuration.
Change-Id: I58c5406ff49ad4c537391c61259d71d9610e875a
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
* changes:
perf(cm): drop ZCR_EL3 saving and some ISBs and replace them with root context
perf(psci): get PMF timestamps with no cache flushes if possible
perf(amu): greatly simplify AMU context management
perf(mpmm): greatly simplify MPMM enablement
SVE and SME aren't enabled symmetrically for all worlds, but EL3 needs
to context switch them nonetheless. Previously, this had to happen by
writing the enable bits just before reading/writing the relevant
context. But since the introduction of root context, this need not be
the case. We can have these enables always be present for EL3 and save
on some work (and ISBs!) on every context switch.
We can also hoist ZCR_EL3 to a never changing register, as we set its
value to be identical for every world, which happens to be the one we
want for EL3 too.
Change-Id: I3d950e72049a298008205ba32f230d5a5c02f8b0
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Whenever we have HW_ASSISTED_COHERENCY, caches are enabled early and we
let the cores do the cache maintenance on our behalf. This is true for
the PSCI stat timestamp capture and used to be the case. However, a
model bug required us to do the cache maintenance manually. That has
been fixed so we can revert back.
Change-Id: Id315a8fea500fb5e2433d3786b2be5a9084300a7
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
The current code is incredibly resilient to updates to the spec and
has worked quite well so far. However, recent implementations expose a
weakness in that this is rather slow. A large part of it is written in
assembly, making it opaque to the compiler for optimisations. The
future proofness requires reading registers that are effectively
`volatile`, making it even harder for the compiler, as well as adding
lots of implicit barriers, making it hard for the microarchitecutre to
optimise as well.
We can make a few assumptions, checked by a few well placed asserts, and
remove a lot of this burden. For a start, at the moment there are 4
group 0 counters with static assignments. Contexting them is a trivial
affair that doesn't need a loop. Similarly, there can only be up to 16
group 1 counters. Contexting them is a bit harder, but we can do with a
single branch with a falling through switch. If/when both of these
change, we have a pair of asserts and the feature detection mechanism to
guard us against pretending that we support something we don't.
We can drop contexting of the offset registers. They are fully
accessible by EL2 and as such are its responsibility to preserve on
powerdown.
Another small thing we can do, is pass the core_pos into the hook.
The caller already knows which core we're running on, we don't need to
call this non-trivial function again.
Finally, knowing this, we don't really need the auxiliary AMUs to be
described by the device tree. Linux doesn't care at the moment, and any
information we need for EL3 can be neatly placed in a simple array.
All of this, combined with lifting the actual saving out of assembly,
reduces the instructions to save the context from 180 to 40, including a
lot fewer branches. The code is also much shorter and easier to read.
Also propagate to aarch32 so that the two don't diverge too much.
Change-Id: Ib62e6e9ba5be7fb9fb8965c8eee148d5598a5361
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
MPMM is a core-specific microarchitectural feature. It has been present
in every Arm core since the Cortex-A510 and has been implemented in
exactly the same way. Despite that, it is enabled more like an
architectural feature with a top level enable flag. This utilised the
identical implementation.
This duality has left MPMM in an awkward place, where its enablement
should be generic, like an architectural feature, but since it is not,
it should also be core-specific if it ever changes. One choice to do
this has been through the device tree.
This has worked just fine so far, however, recent implementations expose
a weakness in that this is rather slow - the device tree has to be read,
there's a long call stack of functions with many branches, and system
registers are read. In the hot path of PSCI CPU powerdown, this has a
significant and measurable impact. Besides it being a rather large
amount of code that is difficult to understand.
Since MPMM is a microarchitectural feature, its correct placement is in
the reset function. The essence of the current enablement is to write
CPUPPMCR_EL3.MPMM_EN if CPUPPMCR_EL3.MPMMPINCTL == 0. Replacing the C
enablement with an assembly macro in each CPU's reset function achieves
the same effect with just a single close branch and a grand total of 6
instructions (versus the old 2 branches and 32 instructions).
Having done this, the device tree entry becomes redundant. Should a core
that doesn't support MPMM arise, this can cleanly be handled in the
reset function. As such, the whole ENABLE_MPMM_FCONF and platform hooks
mechanisms become obsolete and are removed.
Change-Id: I1d0475b21a1625bb3519f513ba109284f973ffdf
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
* changes:
refactor(cpus): declare runtime errata correctly
perf(cpus): make reset errata do fewer branches
perf(cpus): inline the init_cpu_data_ptr function
perf(cpus): inline the reset function
perf(cpus): inline the cpu_get_rev_var call
perf(cpus): inline cpu_rev_var checks
refactor(cpus): register DSU errata with the errata framework's wrappers
refactor(cpus): convert checker functions to standard helpers
refactor(cpus): convert the Cortex-A65 to use the errata framework
fix(cpus): declare reset errata correctly
Support FDT for Agilex5 platform
1. Created wrapper file socfpga_dt.c
2. Added in Agilex5 dts file
3. Implemented fdt_check_header
4. Implemented gic configuration
5. Implemented dram configuration
Remove init of FDT as Agilex5 has no plan to roll
out FDT at the moment.
Change-Id: If3990ed9524c6da5b3cb8966b63bc4a95d01fcda
Signed-off-by: Jit Loon Lim <jit.loon.lim@altera.com>
There errata don't have a workaround in the cpu file. So calling the
wrappers is redundant. We can simply register them with the framework.
Change-Id: I316daeee603e86c9f2bdccf91e1b10f7ec6c3f9d
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Errata application is painful for performance. For a start, it's done
when the core has just come out of reset, which means branch predictors
and caches will be empty so a branch to a workaround function must be
fetched from memory and that round trip is very slow. Then it also runs
with the I-cache off, which means that the loop to iterate over the
workarounds must also be fetched from memory on each iteration.
We can remove both branches. First, we can simply apply every erratum
directly instead of defining a workaround function and jumping to it.
Currently, no errata that need to be applied at both reset and runtime,
with the same workaround function, exist. If the need arose in future,
this should be achievable with a reset + runtime wrapper combo.
Then, we can construct a function that applies each erratum linearly
instead of looping over the list. If this function is part of the reset
function, then the only "far" branches at reset will be for the checker
functions. Importantly, this mitigates the slowdown even when an erratum
is disabled.
The result is ~50% speedup on N1SDP and ~20% on AArch64 Juno on wakeup
from PSCI calls that end in powerdown. This is roughly back to the
baseline of v2.9, before the errata framework regressed on performance
(or a little better). It is important to note that there are other
slowdowns since then that remain unknown.
Change-Id: Ie4d5288a331b11fd648e5c4a0b652b74160b07b9
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Similar to the reset function inline, inline this too to not do a costly
branch with no extra cost.
Change-Id: I54cc399e570e9d0f373ae13c7224d32dbdfae1e5
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Similar to the cpu_rev_var and cpu_ger_rev_var functions, inline the
call_reset_handler handler. This way we skip the costly branch at no
extra cost as this is the only place where this is called.
While we're at it, drop the options for CPU_NO_RESET_FUNC. The only cpus
that need that are virtual cpus which can spare the tiny bit of
performance lost. The rest are real cores which can save on the check
for zero.
Now is a good time to put the assert for a missing cpu in the
get_cpu_ops_ptr function so that it's a bit better encapsulated.
Change-Id: Ia7c3dcd13b75e5d7c8bafad4698994ea65f42406
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
rk3576 is an Octa-core soc with Cortex-a53/a72 inside.
This patch supports the following functions:
1. basic platform setup
2. power up/off cpus
3. suspend/resume cpus
4. suspend/resume system
5. reset system
6. power off system
Change-Id: I67a019822bd4af13e4a3cdd09cf06202f4922cc4
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
* changes:
feat(versal2): extended SMCCC payload for EEMI
feat(versal2): add support for platform management
feat(versal2): add dependency macro for PM
Until Versal, the extended SMCCC payload was supported only for
QUERY_DATA, while other APIs used the legacy SMCCC format.
In Versal Gen 2, all EEMI APIs are supported with extended SMCCC
payload only, enabling a simplified and efficient pass-through
implementation.
Also, set TFA_NO_PM to 0 to enable power management by default.
Change-Id: I937be3c78ebe87c62f8697a0a82cdcd21c185f56
Signed-off-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Add support for PM functionality through EEMI interface for
Versal Gen 2. Add support of PM APIs in PSCI ops. Add
TFA_NO_PM flag to disable PM functionality. Enable wakeup for
new peripherals
Change-Id: I1bf67dc46af91ee113c627d32ae6ecc1dad386c2
Signed-off-by: Naman Trivedi <naman.trivedimanojbhai@amd.com>
Signed-off-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Currently BRBE is being disabled for Realm world in EL3 by
switching the SBRBE bit in mdcr_el3 register to 0b00.
The patch removes the switching of SBRBE bits, and adds
context switch of BRBCR_EL2 register.
Change-Id: I66ca13edefc37e40fa265fd438b0b66f7d09b4bb
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
The pm_api_sys.c file has dependency on the PLAT_ARM_GICR_BASE macro.
Add the macro to fix compilation error when PM is enabled.
Change-Id: Ibd77dd38b4a2a55614064c4ed0b1096acc658a5c
Signed-off-by: Naman Trivedi <naman.trivedimanojbhai@amd.com>
Signed-off-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Similar to the cpu_rev_var_xy functions, branching far away so early in
the reset sequence incurs significant slowdowns. Inline the function.
Change-Id: Ifc349015902cd803e11a1946208141bfe7606b89
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
We strive to apply errata as close to reset as possible with as few
things enabled as possible. Importantly, the I-cache will not be
enabled. This means that repeated branches to these tiny functions must
be re-fetched all the way from memory each time which has glacial speed.
Cores are allowed to fetch things ahead of time though as long as
execution is fairly linear. So we can trade a little bit of space (3 to
7 instructions per erratum) to keep things linear and not have to go to
memory.
While we're at it, optimise the the cpu_rev_var_{ls, hs, range}
functions to take up less space. Dropping the moves allows for a bit of
assembly magic that produces the same result in 2 and 3 instructions
respectively.
Change-Id: I51608352f23b2244ea7a99e76c10892d257f12bf
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
The existing DSU errata workarounds hijack the errata framework's inner
workings to register with it. However, that is undesirable as any change
to the framework may end up missing these workarounds. So convert the
checks and workarounds to macros and have them included with the
standard wrappers.
The only problem with this is the is_scu_present_in_dsu weak function.
Fortunately, it is only needed for 2 of the errata and only on 3 cores.
So drop it, assuming the default behaviour and have the callers handle
the exception.
Change-Id: Iefa36325804ea093e938f867b9a6f49a6984b8ae
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
* changes:
fix(rdn2): add LCA multichip data for RD-N2-Cfg2
fix(rdv3): add LCA multichip data for RD-V3-Cfg2
feat(gic): add support for local chip addressing
The library check_erratum_ls already incorporates the check. The return
of ERRATA_MISSING is handled in the errata_report.c functions.
Change-Id: Ic1dff2bc5235195f7cfce1709cd42467f88b3e4c
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Result was verified by manually stepping through the reset function with
a debugger.
Change-Id: I91cd6111ccf95d6b7ee2364ac2126cb98ee4bb15
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
The errata in this patch are declared as runtime, but are never called
explicitly. This means that they are never called! Convert them to reset
errata so that they are called at reset. Their SDENs entries have been
checked and confirm that this is how they should be implemented.
Also, drop the the MIDR check on the a57 erratum as it's not needed -
the erratum is already called from a cpu-specific function.
Change-Id: I22c3043ab454ce94b3c122c856e5804bc2ebb18b
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Commit@af5ae9a73f67dc8c9ed493846d031b052b0f22a0
Adding a Cortex-A720-AE erratum 3699562 has a typo in CPU name
for the errata, it is for Cortex-A720-AE but had incorrectly
mentioned as Cortex-A715_AE.
Change-Id: I2332a3fcaf56a7aaab5a04e3d40428cc746d2d46
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Enable FEAT_FGT2 and FEAT_Debugv8p9 in Realm state as well.
Change-Id: Ib9cdde3af328ffdd8718b1ba404265757f2e542b
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Modify the FDT buffer for Rockchip devices to 384KiB. This is done to
allow us to pass mainline devicetrees with symbols through Arm Trusted
Firmware. 384KiB was chosen as 512KiB is very near the maximum
supported with the current reserved memory. As of kernel version 6.13,
the largest devicetree with symbols enabled is 215KiB, and the largest
Rockchip devicetree with symbols enabled is 176KiB
(rk3588-evb1-v10.dtb).
Change-Id: Iea9343d7a30ee26cad3ee5cc848980a93873ae34
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
* changes:
feat(s32g274a): enable sdhc clock
feat(nxp-clk): add clock modules for uSDHC
feat(nxp-clk): get MC_CGM divider's parent
feat(nxp-clk): get MC_CGM divider's rate
feat(nxp-clk): set MC_CGM divider's rate
feat(nxp-clk): enable MC_CGM dividers
feat(nxp-clk): get parent for the fixed dividers
feat(nxp-clk): set the rate for partition objects
feat(nxp-clk): add clock objects for CGM dividers
feat(nxp-clk): add base address for PERIPH_DFS
The uSDHC module clock must be enabled to use the SD/eMMC storage from
where the BL2 is expected to load images for the next boot stages.
Change-Id: Ib1cc7d5dda7a4283a29716f5b3d776048bd5b7ba
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
