Add driver to support DDR on STM32MP2 platform. It drives the DDR PHY
and its firmware, as well as the DDR controller.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: I93de2db1b9378d5654e76b3bf6f3407d80bc4ca5
Disabling AXI port, enabling host interface and both enabling/disabling
software self-refresh services are already present inside the driver
source code.
Factorize by gathering them as services inside the generic part,
and adapt driver to call these new functions.
Add services to manage quasi-dynamic registers. DDRCTRL contains
quasi-dynamic registers, which are dynamic only under some conditions
defined by the user guide (with 4 groups).
In our driver, out of reset state, only groups 3 and 4 are updated.
Group 4 needs only sw_done/sw_done_ack sequence, already available.
Group 3 sequence include more conditions, that are gathered in
specific services. stm32mp_ddr_disable_host_interface() has been added
to do this.
Add dedicated generic service to toggle rfshctl3.refresh_update_level
and wait for completion.
Manage AXI ports and HIF when updating QD3 registers. Quasi-dynamic
group 3 (QD3) registers are updated when DDR is not completely
initialized, i.e. when AXI ports are not enabled and possibly when
host interface (HIF) is not enabled too.
In that case, a specific mechanism is necessary to restore the same
conditions as before accessing QD3 registers.
Static functions have been added to get AXI ports and HIF states and
are used to determine the needed conditions to set/unset.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I880f88b1cb6fc76199ad9ea33e9d63a5c469aed4
It was only used for an error trace, with little added value. This
allows some gains in DDR driver data size.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I02e2fc75efd90ff188e62f39850b9bd4c3af1649
Instead of using hard-coded number in DDR driver, use macros.
Modify TIMEOUT_US_1S to DDR_TIMEOUT_US_1S to align with other defines.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I489084132821774b0049a4a5d7fc30db24a7bb11
Modify the DDR driver to handle the DDR power supplies when a PMIC
is present in the function stm32mp_board_ddr_power_init(), define
in the platform file.
This patch allows to easily modify the used DDR power supplies
for customer boards, when they don't use STPMIC1 PMU or when
the regulators are not connected as on the STMicroelectronics
boards.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I93ee6295ef7032ac20f03608d22cd460f7d87ef5
The STPMIC2 embeds 15 regulators with various
properties, and is designed to supply the STM32MP2
SOC. This driver handles a minimal set of feature
to handle the boot of a board.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: Ibe0cacf8aec2871eb9a86ec16cbbd18d3745fe9e
Describe the RISAB (Resource isolation slave unit for address space
protection (block-based)) peripheral registers.
Change-Id: I613a52ae6d94264137378b805119d38ee59ae762
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Create a DDR helper files, and add a function to enable DDR clocks
in RCC_DDRCPCFGR register.
Call this ddr_sub_system_clk_init() just before clock driver init,
as it needs to be done before enabling DDR PLL clock (PLL2).
Change-Id: I365d6aa034363d0c036ce2d9f944f077ba86e193
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This peripheral controls power on STM232MP2 platform.
Change-Id: Ieedca580b5ec897a2fac9e88c7c8c327df6f19c2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This driver manages the clocks on STM32MP2 platforms.
It uses a dedicated RCC (Reset and Clock Control) peripheral.
Change-Id: I6ba2173e73222269a2dfca4c6897229276a150c0
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Add the system reset management into the stm32mp
reset driver.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I748f10de2398e1323160f479f99e92abd2f65dca
Add get and set GPIO level from bank and pin value.
Add functions to set a pad in GPIO configuration
and to apply some settings.
Change-Id: I5e3acb5c95cd03f3e130e1a263b221b956cb3c8d
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Remove the unused functions in stm32mp clk API:
- stm32mp_stgen_get_counter (change to static, no more exported)
- stm32mp_stgen_restore_counter
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Ib6ca72723eac3e133f1ca0dee504ef344c72e0bf
Add a function to restore the CPU generic timer rate from STGEN content.
After wake-up from LPLV-Stop2, STGEN content is not lost, but generic timer
has been reset.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Change-Id: I6f91dbd051f76383e9ff1d6bb86225d373dbf33a
Add a new function to control the MCU subsystem
security state.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I070eec06fc93a1214227f25a6a4f1c40c66c86b0
This driver is used for the new version of the BSEC peripheral used
on STM32MP25.
Change-Id: I38ca0db22d06704769c994c6806ccd80b17dde6e
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The function stm32_i2c_get_setup_from_fdt() was using fdt_getprop() to
to get some i2c node properties, and set a default value if the node
was not found. The function fdt_read_uint32_default() already does
this in a simpler way.
Remove useless STM32_I2C_SPEED_DEFAULT.
Change-Id: I74c6295bb5765ee7c7e0a9ae020b741f1fe022a6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
In order to ease the introduction of a new BSEC3 driver for STM32MP25,
the BSEC2 driver is reworked. Unused functions are removed. The
bsec_base global variable is removed in favor of the macro BSEC_BASE.
A rework is also done around function checking the state of BSEC.
Change-Id: I1ad76cb67333ab9a8fa1d65db34d74a712bf1190
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Express memory size with size_t type in structures.
Retrieve value as uint32_t from device tree and then cast it to size_t.
Combined with uintptr_t use, it ensures a generic algorithm whatever
the platform architecture, notably within systematic tests. Adapt also
their prototypes.
Move memory size print outside stm32mp_ddr_check_size() to adapt it to
related platform.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: Ic6e1a62d7a5e23cef49909a658098c800e7dae3f
Add a header file listing the registers of Reset and Clock Control
peripheral.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Icc90132d5782eba7e343868b932a399c1d47c18a
Remove the control from the include file to avoid compilation
issue. Add the check in the source code instead.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: I533f829607f76389399a3e8dbc3c6095278562ab
This driver was used when STM32MP_USE_STM32IMAGE was enabled. This flag
is now removed, so the ST io_mmc driver can now be removed.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I3c1280dec8926b921534c81e143e86cfe6d4ee0d
The code managing legacy boot (without FIP) that was under
STM32MP_USE_STM32IMAGE flag is remove.
Change-Id: I04452453ed84567b0de39e900594a81526562259
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This driver manages the STM32 Random Number Generator
peripheral.
Change-Id: I4403ebb2dbdaa8df993a4413f1ef48eeba00427c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add code to be able to use STMicroelectronics SAES IP. This driver
can manage many AES algorithms (CBC, ECB, CCM, GCM). It will be used
by the authenticated decryption framework (AES-GCM only).
Change-Id: Ibd4030719fb12877dcecd5d2c395d13b4b15c260
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Add code to be able to use STMicroelectronics PKA peripheral
in the authentication framework.
Change-Id: Ifeafe84c68db483cd18674f2280576cc065f92ee
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Introduce new flag to manage hardware version.
STM32MP15 currently uses the HASH_V2 and STM32MP13 uses the HASH_V4.
For STM32_HASH_V4: remove MD5 algorithm (no more supported) and
add SHA384 and SHA512.
For STM32_HASH_V2: no change.
Change-Id: I3a9ae9e38249a2421c657232cb0877004d04dae1
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
The parameter over_sampling of stm32_uart_init_s is not required
as it can be computed dynamically from clock rate of the serial
device and the requested baudrate.
Oversampling by 8 is allowed only for higher speed
(up to clock_rate / 8) to reduce the maximum receiver tolerance
to clock deviation.
This patch update the driver, the serial init struct and the
only user, the stm32cubeprogrammer over uart support.
Change-Id: I422731089730a288defeb7fa49886db65d0902b2
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
This new function pmic_voltages_init() is used to set the minimum value
for STM32MP13 VDDCPU and VDDCORE regulators. This value is retrieved
from device tree.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ibbe237cb5dccc1fddf92e07ffd3955048ff82075
Add new clock driver for STM32MP13. Split the include file to manage
either STM32MP13 or STM32MP15.
Change-Id: Ia568cd12b1d5538809204f0fd2224d51e5d1e985
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
From the new binding, the RCC become secured based on the new
compatible. This must be done only from the secure OS initialisation.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I7f0a62f22bfcca638ddaefc9563df00f89f01653
Allow to set a gpio in output mode from the device tree.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: Ic483324bc5fe916a60df05f74706bd1da4d08aa5
No functional, change, but some improvements:
- Declare set_gpio() as static (only called locally)
- Handle the type ('open-drain') property independently from the
mode one.
- Replace mmio_clrbits_32() + mmio_setbits_32() with
mmio_clrsetbits_32().
- Add a missing log
- Add missing U() in macro definitions
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: I1a79609609ac8e8001127ebefdb81def573f76fa
Rename driver file to BSEC2.
Split header file in IP and feature parts.
Add functions to access BSEC scratch register.
Several corrections and improvements.
Probe the driver earlier, especially to check debug features.
Change-Id: I1981536398d598d67a19d2d7766dacc18de72ec1
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Rework the internal functions __stm32mp1_clk_enable/disable to check for
reference count instead of secure status for a clock.
Some functions now unused can be removed.
Change-Id: Ie4359110d7144229f85c961dcd5a019222c3fd25
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Instead of transmitting an 'enum stm32mp_osc_id', just send
directly the clock name with a 'const char *'
Change-Id: I866b05cbb1685a9b9f80e63dcd5ba7b1d35fc932
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
These basic tests are generic and should be used independently of the
driver, depending on the plaftorm characteristics.
Change-Id: I38161b659ef2a23fd30a56e1c9b1bd98461a2fe4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
stm32mp_ddrctl structure contains DDRCTRL registers definitions.
stm32mp_ddr_info contains general DDR information extracted from DT.
stm32mp_ddr_size moves to the generic side.
stm32mp1_ddr_priv contains platform private data.
stm32mp_ddr_dt_get_info() and stm32mp_ddr_dt_get_param() allow to
retrieve data from DT. They are located in new generic c/h files in
which stm32mp_ddr_param structure is declared. Platform makefile
is updated.
Adapt driver with this new classification.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I4187376c9fff1a30e7a94407d188391547107997
A new flag STM32MP_DDR_DUAL_AXI_PORT is added, and enabled by default.
It will allow choosing single or dual AXI ports for DDR.
Change-Id: I48826a66a6f4d18df87e081c0960af89ddda1b9d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the read data eye training = training for optimal read valid placement
(RVTRN) when the built-in calibration is executed for LPDDR2 and LPDDR3.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I7ac1c77c21ebc30315b532741f2f255c2312d5b2
The support of a predefined DDR PHY tuning result is removed for
STM32MP1 driver because it is not needed at the supported frequency
when built-in calibration is executed.
The calibration parameters were provided in the device tree by the
optional node "st,phy-cal", activated in ddr helper file by the
compilation flag DDR_PHY_CAL_SKIP and filled with values generated
by CubeMX.
This patch
- updates the binding file to remove "st,phy-cal" support
- updates the device trees and remove the associated defines
- simplifies the STM32MP1 DDR driver and remove the support of
the optional "st,phy-cal"
After this patch the built-in calibration is always executed.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I3fc445520c259f7f05730aefc25e64b328bf7159
To correctly initialize the MMC devices, a power cycle is required.
For this we need to:
- disable vmmc-supply regulator
- make the power cycle required for SDMMC2 peripheral
- enable regulators
Change-Id: I2be6d9082d1cc4c864a82cf2c31ff8522e2d31a2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Fixed regulator is mainly used when no pmic is available
Change-Id: Ib6a998684bcb055ba95a093bee563372d9051474
Signed-off-by: Pascal Paillet <p.paillet@st.com>
print_pmic_info_and_debug() prints the PMIC version ID and displays
regulator information if debug is enabled.
It is under DEBUG flag and called after initialize_pmic() in BL2.
Change-Id: Ib81a625740b7ec6abb49cfca05e44c69efaa4718
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Add a regulator framework to:
- provide an interface to consumers and drivers,
- connect consumers with drivers,
- handle most of devicetree-parsing,
- handle always-on and boot-on regulators,
- handle min/max voltages,
Change-Id: I23c939fdef2c71a416c44c9de332f70db0d2aa53
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Add support for ICC, sink mode, bypass mode,
active discharge and list voltages.
Handle LDO3 sink source mode in a different way to avoid
setting voltage while in sink source mode.
Change-Id: Ib1b909fd8a153f542917f650e43e24317a570534
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Add regulators boost, pwr_sw1 and pwr_sw2 regulators related to
USB OTG supply BOOST, SW_OTG and SWIN/SWOUT. These regulators are
needed since manipulated during the suspend/resume power sequence
as per FDT description for stm32mp15x-xxx boards from
STMicroelectronics.
Change-Id: I6217de707e49882bd5a9100db43e0d354908800d
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
