- Add PCIe and SMMUv3 related information to DTS for
configurations with ENABLE_RME=1.
- Add entries for PCIe IO memory regions to Boot manifest
- Update RMMD_MANIFEST_VERSION_MINOR from 3 to 4.
- Read PCIe related information from DTB and write it to
Boot manifest.
- Rename structures that used to describe DRAM layout
and now describe both DRAM and PCIe IO memory regions:
- ns_dram_bank -> memory_bank
- ns_dram_info -> memory_info.
Change-Id: Ib75d1af86076f724f5c330074e231f1c2ba8e21d
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
For FVP model define single Root PAS which
includes EL3 DRAM data, L1 GPTs and SCP TZC.
This allows to decrease the number of PAS
regions passed to GPT library and use GPT
mapping with Contiguous descriptor of
larger block size.
Change-Id: I70f6babaebc14e5e0bce033783ec423c8a26c542
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
In RESET_TO_BL31, the SPMC manifest base address that is utilized by
bl32_image_ep_info has to be statically defined as DT is not available.
Common arm code sets this to the top of SRAM using macros but it can be
different for some platforms. Hence, introduce the macro
PLAT_ARM_SPMC_MANIFEST_BASE that could be re-defined by platform as per
their use-case. Platforms that utilize arm_def.h would use the existing
value from arm common code.
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: I4491749ad2b5794e06c9bd11ff61e2e64f21a948
Leverage the framework between BL1 and BL2. Migrate all handoff
structures to the TL.
Change-Id: I79ff3a319596b5656184cde10b5204b10a4d03bb
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
In accordance with common naming conventions, macros specifying the base
address of a region typically use the prefix "BASE" combined with the
region name, rather than "ADDR_BASE."
Currently, the macros defining the base addresses for L0 and L1 GPT
tables within `arm_def.h` are named "ARM_L0_GPT_ADDR_BASE" and
"ARM_L1_GPT_ADDR_BASE" respectively. To adhere to the established naming
convention, rename these macros as "ARM_L1_GPT_BASE" and
"ARM_L0_GPT_BASE" respectively.
Signed-off-by: Rohit Mathew <Rohit.Mathew@arm.com>
Change-Id: Ibd50a58a1f63ba97d2df141f41a21a89ef97d6fb
The file arm_def.h currently contains common definitions used by ARM
platforms. However, some platforms may have their own definitions,
allowing them to avoid a direct dependency on arm_def.h. For a clean
platform port of arm_def.h, none of the source files should directly
include arm_def.h; instead, they should include the platform header
which would indirectly include the required definitions.
Presently, the rotpk module has a source file that directly includes
arm_def.h. This could lead to compilation issues if the platform
incorporating the rotpk module has a separate implementation of some or
all of the definitions in arm_def.h file. To address this, move the
relevant definitions out of arm_def.h and into rotpk_def.h.
Signed-off-by: Rohit Mathew <Rohit.Mathew@arm.com>
Change-Id: I9e8b0d319391f9a167af5c69a7b2d42ac488e7b4
CryptoCell-712 and CryptoCell-713 drivers have been deprecated since
TF-A v2.9 and their removal was announced for TF-A v2.10 release.
See [1].
As the release is approaching, this patch deletes these drivers' code as
well as all references to them in the documentation and Arm platforms
code (Nuvoton platform is taken care in a subsequent patch). Associated
build options (ARM_CRYPTOCELL_INTEG and PLAT_CRYPTOCELL_BASE) have also
been removed and thus will have no effect if defined.
This is a breaking change for downstream platforms which use these
drivers.
[1] https://trustedfirmware-a.readthedocs.io/en/v2.9/about/release-information.html#removal-of-deprecated-drivers
Note that TF-A v3.0 release later got renumbered into v2.10.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: Idabbc9115f6732ac1a0e52b273d3380677a39813
This patch removes RAS_FFH_SUPPORT macro which is the combination of
ENABLE_FEAT_RAS and HANDLE_EA_EL3_FIRST_NS. Instead introduce an
internal macro FFH_SUPPORT which gets enabled when platforms wants
to enable lower EL EA handling at EL3. The internal macro FFH_SUPPORT
will be automatically enabled if HANDLE_EA_EL3_FIRST_NS is enabled.
FFH_SUPPORT along with ENABLE_FEAT_RAS will be used in source files
to provide equivalent check which was provided by RAS_FFH_SUPPORT
earlier. In generic code we needed a macro which could abstract both
HANDLE_EA_EL3_FIRST_NS and RAS_FFH_SUPPORT macros that had limitations.
Former was tied up with NS world only while the latter was tied to RAS
feature.
This is to allow Secure/Realm world to have their own FFH macros
in future.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ie5692ccbf462f5dcc3f005a5beea5aa35124ac73
Removing ARM_ROTPK_KEY_LEN definition and comparison in full key .S
files since there is little value in comparing the defined value with a
static size. This becomes more maintenance than value addition.
Removing defines no longer required and general clean up of .S full key
files.
Change-Id: Id286b7078ab9e190e37a43804e2a8d1b0934c235
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Add full key support for ECDSA P384 and P256.
New .S files and p384 pem file created along with new
plat_get_rotpk_info() flag ARM_ROTPK_DEVEL_FULL_DEV_ECDSA_KEY_ID.
Change-Id: I578b257eca41070bb4f4791ef429f2b8a66b1eb3
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
BL31 image has grown with feature addition over time. In particular the
RESET_TO_BL2 + ENABLE_PIE + DEBUG combination of options lead to BL31
image overlap head of BL2 image. In this configuration BL2 is meant to
stay resident as PE reset occurs from BL2. Apply changes similar to [1]
such that BL2 start address is pushed forward and leaves more room for
BL31 end of image.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/15486/9/include/plat/arm/common/arm_def.h#530
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I027e23780fb77ca9fe81aa47231da649c7a030ee
To handle the core corrected errors in the firmware, the FHI PPI
interrupt has to be enabled on all the cores. At boot, when the RAS
framework is initialized, only primary core is up and hence core FHI PPI
interrupt is enabled only on primary core. This patch adds support to
configure and enable core FHI interrupt for all the secondary cores as
part of their boot sequence.
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>
Change-Id: I4b25152cb498fe975b9c770babb25aa9e01f9656
Adjusted BL31 maximum size as per total SRAM size.
Change-Id: Ifdfdedb8af3e001cebba8e60c973f3c72be11652
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
BL32_LIMIT has been increased from 2MB to 4MB to accommodate
the latest tee.bin (it is around ~2.1MB).
Change-Id: I47b770bf23c23d38931a2b3316d076b829338d70
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Co-developed-by: Juan Pablo Conde <juanpablo.conde@arm.com>
BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).
BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.
Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Reserved 4KB area for Event Log in DRAM1. This area is used by BL2
to copy Event Log from internal SRAM to this carved out DRAM region
in the subsequent patch.
Change-Id: I7b405775c66d249e31edf7688d95770e6c05c175
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Some of our specialized sections are not prefixed with the conventional
period. The compiler uses input section names to derive certain other
section names (e.g. `.rela.text`, `.relacpu_ops`), and these can be
difficult to select in linker scripts when there is a lack of a
delimiter.
This change introduces the period prefix to all specialized section
names.
BREAKING-CHANGE: All input and output linker section names have been
prefixed with the period character, e.g. `cpu_ops` -> `.cpu_ops`.
Change-Id: I51c13c5266d5975fbd944ef4961328e72f82fc1c
Signed-off-by: Chris Kay <chris.kay@arm.com>
This patch builds on the previous patch by implementing
support for reading NS DRAM layout of FVP model from
HW_CONFIG Device tree.
Macro _RMMD_MANIFEST_VERSION is renamed to
SET_RMMD_MANIFEST_VERSION to suppress MISRA-C
"rule MC3R1.D4.5: (advisory) Identifiers in
the same name space with overlapping visibility
should be typographically unambiguous" warning
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Change-Id: Ifc2461b4441a1efdd4b7c656ab4d15e62479f77b
This patch adds support for setting configuration of DRAM banks
for FVP model in RMM-EL3 Boot Manifest structure.
Structure 'rmm_manifest' is extended with 'plat_dram' structure
which contains information about platform's DRAM layout:
- number of DRAM banks;
- pointer to 'dram_bank[]' array;
- check sum: two's complement 64-bit value of the sum of
data in 'plat_dram' and 'dram_bank[] array.
Each 'dram_bank' structure holds information about DRAM
bank base address and its size. This values must be aligned
to 4KB page size.
The patch increases Boot Manifest minor version to 2 and
removes 'typedef rmm_manifest_t' as per
"3.4.15.1. Avoid anonymous typedefs of structs/enums in headers" of
https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-style.html
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Change-Id: I5176caa5780e27d1e0daeb5dea3e40cf6ad5fd12
Add support for ARM_ROTPK_LOCATION=devel_full_dev_rsa_key, which
implements the scenario where the platform provides the full ROTPK, as
opposed to the hash of it. This returns a 2kB development RSA key
embedded into the firmware.
The motivation for this patch is to extend our test coverage in the CI.
Right now, the authentication framework allows platforms to return
either the full ROTPK or a hash of it (*). However, the FVP platform
only supports returning a hash currently so we cannot easily exercise
the full key scenario. This patch adds that capability.
(*) Or even no key at all if it's not deployed on the platform yet, as
is typically the case on pre-production/developement platforms.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ie869cca1082410e63894e2b7dea2d31155684105
The patch 8c980a4 created a 4KB shared region from the 32MB
Realm region for RMM-EL3 communication. But this meant that BL2
needs to map a region of 32MB - 4KB, which required more xlat
tables at runtime. This patch maps the entire 32MB region in BL2
which is more memory efficient in terms of xlat tables needed.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I17aa27545293d7b5bbec1c9132ea2c22bf2e7e65
This patch adds the infrastructure needed to pass boot arguments from
EL3 to RMM and allocates a shared buffer between both worlds that can
be used, among others, to pass a boot manifest to RMM. The buffer is
composed a single memory page be used by a later EL3 <-> RMM interface
by all CPUs.
The RMM boot manifest is not implemented by this patch.
In addition to that, this patch also enables support for RMM when
RESET_TO_BL31 is enabled.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I855cd4758ee3843eadd9fb482d70a6d18954d82a
BL2 base address updated to provide enough space for BL31 in
Trusted SRAM when building with BL2_AT_EL3 and ENABLE_PIE options.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ieaba00d841648add855feb99b7923a4b0cccfb08
For EL3 SPMC configuration enabled platforms, allow the reuse of
BL32 specific definitions.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I37ffbbf680326c101fbb2f146085a96c138f07a1
Currently, HW-config is loaded into non-secure memory, which mean
a malicious NS-agent could tamper with it. Ideally, this shouldn't
be an issue since no software runs in non-secure world at this time
(non-secure world has not been started yet).
It does not provide a guarantee though since malicious external
NS-agents can take control of this memory region for update/corruption
after BL2 loads it and before BL31/BL32/SP_MIN consumes it. The threat
is mapped to Threat ID#3 (Bypass authentication scenario) in threat
model [1].
Hence modified the code as below -
1. BL2 loads the HW_CONFIG into secure memory
2. BL2 makes a copy of the HW_CONFIG in the non-secure memory at an
address provided by the newly added property(ns-load-address) in
the 'hw-config' node of the FW_CONFIG
3. SP_MIN receives the FW_CONFIG address from BL2 via arg1 so that
it can retrieve details (address and size) of HW_CONFIG from
FW_CONFIG
4. A secure and non-secure HW_CONFIG address will eventually be used
by BL31/SP_MIN/BL32 and BL33 components respectively
5. BL31/SP_MIN dynamically maps the Secure HW_CONFIG region and reads
information from it to local variables (structures) and then
unmaps it
6. Reduce HW_CONFIG maximum size from 16MB to 1MB; it appears
sufficient, and it will also create a free space for any future
components to be added to memory
[1]: https://trustedfirmware-a.readthedocs.io/en/latest/threat_model/threat_model.html
Change-Id: I1d431f3e640ded60616604b1c33aa638b9a1e55e
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
On RME-enabled platforms, it is currently not possible to incorporate
mapping of all bl_regions specified in bl31 setup[1] with the
ARM_BL_REGIONS macro defined to 6. Hence increased its count to 7.
[1]: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/
plat/arm/common/arm_bl31_setup.c#n380
Change-Id: Ieaa97f026ab2ae6eae22442595aa4122ba0a13c4
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch updates and refactors the GPT library and fixes bugs.
- Support all combinations of PGS, PPS, and L0GPTSZ parameters.
- PPS and PGS are set at runtime, L0GPTSZ is read from GPCCR_EL3.
- Use compiler definitions to simplify code.
- Renaming functions to better suit intended uses.
- MMU enabled before GPT APIs called.
- Add comments to make function usage more clear in GPT library.
- Added _rme suffix to file names to differentiate better from the
GPT file system code.
- Renamed gpt_defs.h to gpt_rme_private.h to better separate private
and public code.
- Renamed gpt_core.c to gpt_rme.c to better conform to TF-A precedent.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I4cbb23b0f81e697baa9fb23ba458aa3f7d1ed919
When FEAT_RME is enabled, memory is divided into four Physical
Address Spaces (PAS): Root, Realm, Secure and Non-secure.
This patch introduces new carveouts for the Trusted SRAM and DRAM
for the FVP platform accordingly.
The following new regions are introduced with this change:
ARM_MAP_L0_GPT_REGION: Trusted SRAM region used to store Level 0
Granule Protection Table (GPT). This region resides in the Root PAS.
ARM_MAP_GPT_L1_DRAM: DRAM region used to store Level 1 GPT. It
resides in the Root PAS.
ARM_MAP_RMM_DRAM: DRAM region used to store RMM image. It
resides in the Realm PAS.
The L0 GPT is stored on Trusted SRAM next to firmware configuration
memory. The DRAM carveout when RME is enable is modified as follow:
--------------------
| |
| AP TZC (~28MB) |
--------------------
| |
| REALM (32MB) |
--------------------
| |
| EL3 TZC (3MB) |
--------------------
| L1 GPT + SCP TZC |
| (~1MB) |
0xFFFF_FFFF --------------------
During initialization of the TrustZone controller, Root regions
are configured as Secure regions. Then they are later reconfigured
to Root upon GPT initialization.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: If2e257141d51f51f715b70d4a06f18af53607254
If FEAT_RME is enabled, EL3 runs in the Root world as opposed to
Secure world. This patch changes EL3 memory region attributes for
Arm platforms accordingly.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: Ie176f8b440ff34330e4e44bd3bf8d9703b3892ff
Adding load, authentication, and transfer functionality from FVP R BL1 to
BL33, which will be the partner runtime code.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I293cad09739dacac0d20dd57c1d98178dbe84d40
For v8-R64, especially R82, creating code to run BL1 at EL2, using MPU.
Signed-off-by: Gary Morrison <gary.morrison@arm.com>
Change-Id: I439ac3915b982ad1e61d24365bdd1584b3070425
Creating a platform port for FVP_R based on the FVP platform.
Differences including only-BL1, aarch64, Secure only, and EL2 being the
ELmax (No EL3).
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I1283e033fbd4e03c397d0a2c10c4139548b4eee4
For Arm platforms PIE is enabled when RESET_TO_BL31=1 in aarch64 mode on
the similar lines enable PIE when RESET_TO_SP_MIN=1 in aarch32 mode.
The underlying changes for enabling PIE in aarch32 is submitted in
commit 4324a14bf
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib8bb860198b3f97cdc91005503a3184d63e15469
To support platforms without Trusted DRAM this patch defines
PLAT_ARM_SPMC_BASE and enables platform to use either Trusted DRAM or
DRAM region behind TZC.
Change-Id: Icaa5c7d33334258ff27e8e0bfd0812c304e68ae4
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
'EHF' is used by RAS, SDEI, SPM_MM common frameworks.
If platform needs to plug-in specific handlers then
'PLAT_EHF_DESC' can be used to populate platform specific
priority levels.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Change-Id: I37af7e0e48111f87b6982604bf5c15db3e05755d
In BL2, fw_config's population happened before the cache gets
enabled.
Hence to boost the performance, moved fw_config's population
after cache gets enabled (i.e. after MMU gets enabled).
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2e75cabd76b1cb7a660f6b72f409ab40d2877284
This patch adds support for Measured Boot driver functionality
in common Arm platform code.
Change-Id: If049dcf8d847c39023b77c0d805a8cf5b8bcaa3e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Included cot_descriptors.dtsi in platform device tree
(fvp_tb_fw_config.dts).
Also, updated the maximum size of tb_fw_config to 0x1800
in order to accomodate the device tree for CoT descriptors.
Follow up patch will parse the device tree for these CoT descriptors
and fill the CoT descriptor structures at runtime instead of using
static CoT descriptor structures in the code base.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I90122bc713f6842b82fb019b04caf42629b4f45a
Increased the size of firmware configuration area to accommodate
all configs.
Updated maximum size of following bootloaders due to increase
in firmware configs size and addition of the code in the BL2.
1. Increased maximum size of BL2 for Juno platform in no
optimisation case.
2. Reduced maximum size of BL31 for fvp and Juno platform.
3. Reduced maximum size of BL32 for Juno platform.
Change-Id: Ifba0564df0d1fe86175bed9fae87fdcf013b1831
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Cleaned up confused naming between TB_FW and FW_CONFIG.
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I9e9f6e6ca076d38fee0388f97d370431ae067f08
This patch introduces dynamic configuration for SDEI setup and is supported
when the new build flag SDEI_IN_FCONF is enabled. Instead of using C arrays
and processing the configuration at compile time, the config is moved to
dts files. It will be retrieved at runtime during SDEI init, using the fconf
layer.
Change-Id: If5c35a7517ba00a9f258d7f3e7c8c20cee169a31
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Co-authored-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Moved SMCCC defines from plat_arm.h to new <smccc_def.h> header
and include this header in all ARM platforms.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4cbc69c7b9307461de87b7c7bf200dd9b810e485
* changes:
SPMD: enable SPM dispatcher support
SPMD: hook SPMD into standard services framework
SPMD: add SPM dispatcher based upon SPCI Beta 0 spec
SPMD: add support to run BL32 in TDRAM and BL31 in secure DRAM on Arm FVP
SPMD: add support for an example SPM core manifest
SPMD: add SPCI Beta 0 specification header file
This patch reserves and maps the Trusted DRAM for SPM core execution.
It also configures the TrustZone address space controller to run BL31
in secure DRAM.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: I7e1bb3bbc61a0fec6a9cb595964ff553620c21dc
Enables usage of ARM_ROTPK_LOCATION=regs for FVP board.
Removes hard-coded developer keys. Instead, setting
ARM_ROTPK_LOCATION=devel_* takes keys from default directory.
In case of ROT_KEY specified - generates a new hash and replaces the
original.
Note: Juno board was tested by original feature author and was not tested
for this patch since we don't have access to the private key. Juno
implementation was moved to board-specific file without changing
functionality. It is not known whether byte-swapping is still needed
for this platform.
Change-Id: I0fdbaca0415cdcd78f3a388551c2e478c01ed986
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
the build to require that ARM_BL31_IN_DRAM is enabled as well.
Naturally with SEPARATE_NOBITS_REGION enabled, the BL31 initialization code
cannot be reclaimed to be used for runtime data such as secondary cpu stacks.
Memory map for BL31 NOBITS region also has to be created.
Change-Id: Ibbc8c9499a32e63fd0957a6e254608fbf6fa90c9
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
the build to require that ARM_BL31_IN_DRAM is enabled as well.
Naturally with SEPARATE_NOBITS_REGION enabled, the BL31 initialization code
cannot be reclaimed to be used for runtime data such as secondary cpu stacks.
Memory map for BL31 NOBITS region also has to be created.
Change-Id: Ibd480f82c1dc74e9cbb54eec07d7a8fecbf25433
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
