FEAT_MOPS, mandatory from Arm v8.8, is typically managed in EL2.
However, in configurations where NS_EL2 is not enabled,
EL3 must set the HCRX_EL2.MSCEn bit to 1 to enable the feature.
This patch ensures FEAT_MOPS is enabled by setting HCRX_EL2.MSCEn to 1.
Change-Id: Ic4960e0cc14a44279156b79ded50de475b3b21c5
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Mbed-TLS requires platforms to allocate it a heap for it's own internal
usage. This heap is typically between shared by BL1 and BL2 to conserve
memory.The base address and size of the heap are conveyed from BL1 to
BL2 through the config TB_FW_CONFIG.
This slightly awkward approach necessitates declaring a placeholder node
in the DTS. At runtime, this node is populated with the actual values of
the heap information. Instead, since this is dynamic information, and
simple to represent through C structures, transmit it to later stages
using the firmware handoff framework.
With this migration, remove references to TB_FW_CONFIG when firmware
handoff is enabled, as it is no longer needed. The setup code now relies
solely on TL structures to configure the TB firmware
Change-Id: Iff00dc742924a055b8bd304f15eec03ce3c6d1ef
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
This patch enables support of FEAT_FPMR by enabling access
to FPMR register. It achieves it by setting the EnFPM bit of
SCR_EL3. This feature is currently enabled for NS world only.
Reference:
https://developer.arm.com/documentation/109697/2024_09/
Feature-descriptions/The-Armv9-5-architecture-extension?lang=en
Change-Id: I580c409b9b22f8ead0737502280fb9093a3d5dd2
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
To produce PHIT HOB list in FVP, add build path for hob library.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Change-Id: I8f4905433bd1cc6f4c9247197b9bd69041f50fd7
Add basic CPU library code to support the Alto CPU.
Change-Id: I45958be99c4a350a32a9e511d3705fb568b97236
Signed-off-by: Igor Podgainõi <igor.podgainoi@arm.com>
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This patch disables trapping to EL3 when the FEAT_D128
specific registers are accessed by setting the SCR_EL3.D128En bit.
If FEAT_D128 is implemented, then FEAT_SYSREG128 is implemented.
With FEAT_SYSREG128 certain system registers are treated as 128-bit,
so we should be context saving and restoring 128-bits instead of 64-bit
when FEAT_D128 is enabled.
FEAT_SYSREG128 adds support for MRRS and MSRR instruction which
helps us to read write to 128-bit system register.
Refer to Arm Architecture Manual for further details.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Change-Id: I1a53db5eac29e56c8fbdcd4961ede3abfcb2411a
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Add the basic CPU library code to support Cortex-A720AE.
The overall library code is adapted based on Cortex-A720 code.
Signed-off-by: David Hu <david.hu2@arm.com>
Signed-off-by: Ahmed Azeem <ahmed.azeem@arm.com>
Change-Id: I3d64dc5a3098cc823e656a5ad3ea05cd71598dc6
Add basic CPU library code to support the Arcadia CPU.
Change-Id: Iecb0634dc6dcb34e9b5fda4902335530d237cc43
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Add required SMCs by RMM to push attestation signing requests to EL3
and get responses. EL3 may then choose to push these requests to a HES
as suitable for a platform. This patch also supports the new
RMM_EL3_FEATURES interface, that RMM can use to query for support for
HES based signing. The new interface exposes a feature register with
different bits defining different discoverable features. This new
interface is available starting the 0.4 version of the RMM-EL3
interface, causing the version to bump up. This patch also adds a
platform port for FVP that implements the platform hooks required to
enable the new SMCs, but it does not push to a HES and instead copies a
zeroed buffer in EL3.
Change-Id: I69c110252835122a9533e71bdcce10b5f2a686b2
Signed-off-by: Raghu Krishnamurthy <raghupathyk@nvidia.com>
Arm v8.9 introduces FEAT_SCTLR2, adding SCTLR2_ELx registers.
Support this, context switching the registers and disabling
traps so lower ELs can access the new registers.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Change-Id: I0c4cba86917b6b065a7e8dd6af7daf64ee18dcda
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Arm v8.9 introduces FEAT_THE, adding Translation Hardening Extension
Read-Check-Write mask registers, RCWMASK_EL1 and RCWSMASK_EL1.
Support this, context switching the registers and disabling
traps so lower ELs can access the new registers.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Change-Id: I8775787f523639b39faf61d046ef482f73b2a562
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Make the process of compiling a TL from DT source flexible. Provide a
top level recipe to make it easier for developers to build a transfer
list. Clean up integration of TLC into the build system.
Change-Id: I4466e27a457dfd5bf709dc3a360a2b63bf6030ce
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
ENABLE_FEAT_MTE2 controls the trapping of some MTE related system
registers. If the memory_tagging_support_level parameter on the FVP
command line is set to higher values, non-secure world will see the
feature bits in the CPU ID registers and will use those registers,
triggering a panic in BL31.
Enable the feature in the optional form for the FVP build, to avoid any
panics.
Change-Id: I26ba444d784adf165db81048f93e11361c7f11ac
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Illegal combinations of build flags associated with SIMD context
management are flagged by the build system.
Change-Id: I3192af3889e1e864c7875778616e167ba6894195
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This patch disables trapping to EL3 when the FEAT_FGT2
specific trap registers are accessed by setting the
SCR_EL3.FGTEn2 bit
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I6d2b614affb9067b2bc3d7bf0ae7d169d031592a
This patch enables FEAT_Debugv8p9 and prevents EL1/0 from
trapping to EL3 when accessing MDSELR_EL1 register by
setting the MDCR_EL3.EBWE bit.
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I3613af1dd8cb8c0d3c33dc959f170846c0b9695a
Most newer CPU's have DSU and CPU power control core-off bit which
means before turning off CPUs from base power controller we need to
turn individual cores off from CPU Power control.
However there are certain older CPU's that don't have DSU and
don't support CPUPWRCTRL_EL1, so populate them as a list
and ignore setting core-off bit for those older CPU's as all newer
CPU's have them.
Note: unfortunately there is no mechanism to identify if a DSU is
present and CPUPWRCTRL_EL1 is supported through any CPU control
registers and CPUPWRCTRL_EL1 is supported only for ARM64 platforms
and not available in ARM32 platforms.
Change-Id: Iba6c3c8db60dbeb177cead7ebc65df8265860da7
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
This patch adds support for large GPT mappings using
Contiguous descriptors. The maximum size of supported
contiguous block in MB is defined in RME_GPT_MAX_BLOCK
build parameter and takes values 0, 2, 32 and 512 and
by default set to 2 in make_helpers/defaults.mk.
Setting RME_GPT_MAX_BLOCK value to 0 disables use of
Contiguous descriptors.
Function gpt_tlbi_by_pa_ll() and its declaration
are removed from lib/aarch64/misc_helpers.S and
include/arch/aarch64/arch_helpers.h, because the
GPT library now uses tlbirpalos_xxx() functions.
Change-Id: Ia9a59bde1741c5666b4ca1de9324e6dfd6f734eb
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Move CPUs which are not tested in CI under a new build option.
We have added some CPUs for which there is no FVP models available
yet to test. Move those CPUs under a new FVP build option.
Change-Id: I3da12d2f8d9c246b435b31adfac61c79dc1ab0cb
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
commit@138221c2457b9d04101b84084c07d576b0eb5a51 reduced items that
should be build due to SRAM size limitations.
But newer models from 11.19 onwards support to set SRAM size greater
than 256KB. So remove all dependency and conditional builds for FVP.
Change-Id: I38684e100450b74fdda0d685775e2cbce92170b6
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Leverage the framework between BL1 and BL2. Migrate all handoff
structures to the TL.
Change-Id: I79ff3a319596b5656184cde10b5204b10a4d03bb
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Add support for the firmware handoff framework between BL2 and BL31.
Create a transfer list in trusted SRAM, leveraging the larger SRAM sizes
in recent models. Load the HW_CONFIG as a TE along with entry point
parameters for BL31 execution.
Change-Id: I7c4c6e8353ca978a13520fb3e15fb2803f0f1d0e
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
The core platform layer requires an implementation for the
`plat_core_pos_by_mpidr` function. This implementation is currently
missing in BL1, which causes undefined reference errors when linking
with LTO.
The FVP platform source file providing this implementation is the
`fvp_topology.c` file, so this change adds it to the BL1 sources for the
FVP.
However, the implementation of this function reaches out to the FVP
power controller driver - `fvp_pm.c` - to validate the MPIDR, and this
file has at least two other dependencies:
- `spe.c`
- `arm_gicvX.c`
Pulling these in correctly is no simple job, so I am simply removing the
power controller validation in BL1 builds.
Change-Id: I56ddf1d799f5fe7f5b0fb2b046f7fe8232b07b27
Signed-off-by: Chris Kay <chris.kay@arm.com>
Currently both FEAT_MTE and FEAT_MTE_PERM aren't used for enabling
of any feature bits in EL3. So remove both FEAT handling.
All mte regs that are currently context saved/restored are needed
only when FEAT_MTE2 is enabled, so move to usage of FEAT_MTE2 and
remove FEAT_MTE usage.
BREAKING CHANGE: Any platform or downstream code trying to use
SCR_EL3.ATA bit(26) will see failures as this is now moved to be
used only with FEAT_MTE2 with
commit@ef0d0e5478a3f19cbe70a378b9b184036db38fe2
Change-Id: Id01e154156571f7792135639e17dc5c8d0e17cf8
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A720 erratum 2926083 is a Cat B erratum that is present
in revisions r0p0, r0p1 and is fixed in r0p2. The errata is only
present when SPE (Statistical Profiling Extension) is implemented
and enabled.
The workaround is to set bits[58:57] of the CPUACTLR_EL1 to 'b11
when SPE is "implemented and enabled".
SDEN documentation:
https://developer.arm.com/documentation/SDEN2439421/latest
Change-Id: I30182c3893416af65b55fca9a913cb4512430434
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Cortex-A715 erratum 2413290 is a Cat B erratum that is present
only in revision r1p0 and is fixed in r1p1. The errata is only
present when SPE(Statistical Profiling Extension) is enabled.
The workaround is to set bits[58:57] of the CPUACTLR_EL1 to 'b11
when SPE is enabled, ENABLE_SPE_FOR_NS=1.
SDEN documentation:
https://developer.arm.com/documentation/SDEN2148827/latest
Change-Id: Iaeb258c8b0a92e93d70b7dad6ba59d1056aeb135
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Cortex-X4 erratum 2701112 is cat B erratum that applies to
revision r0p0 and is fixed in r0p1. This erratum affects
system configurations that do not use an Arm interconnect IP.
The workaround for this erratum is not implemented in EL3.
The erratum can be enabled/disabled on a platform level.
The flag is used when the errata ABI feature is enabled and can
assist the Kernel in the process of mitigation of the erratum.
SDEN Documentation:
https://developer.arm.com/documentation/SDEN2432808/latest
Change-Id: I8ede1ee75b0ea1658369a0646d8af91d44a8759b
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Remove any residual RSS usage in the FVP platform, complementing the
changes made in commit dea307fd6c.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I9ced272503456361610ec0c7783d270349233926
Essentially revert [1] to permit specifying SME support along with
SPD=spmd on FVP platform.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/20764
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Iab15d5a4c966b9f5b265ccde6711765e242abeaa
This setup helps to mimic an end-to-end RAS handling flow inspired
by real world design with a dedicated RAS secure partition managed
by SPMC.
The detailed steps are documented as comments in the relevant source
files introduced in this patch.
Change-Id: I97737c66649f6e49840fa0bdf2e0af4fb6b08fc7
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This feature provides support to context save the
SCXTNUM_ELx register. FEAT_CSV2_3 implies the implementation
of FEAT_CSV2_2. FEAT_CSV2_3 is supported in AArch64 state only
and is an optional feature in Arm v8.0 implementations.
This patch adds feature detection for v8.9 feature FEAT_CSV2_3,
adds macros for ID_AA64PFR0_EL1.CSV2 bits [59:56] for detecting
FEAT_CSV2_3 and macro for ENABLE_FEAT_CSV2_3.
Change-Id: Ida9f31e832b5f11bd89eebd6cc9f10ddad755c14
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Removed RSS usage from the Base AEM FVP platform, as it wasn't
functional on this platform. The Base AEM FVP platform lacks
support for RSS.
Instead, the TC2 platform with RSS is available for actual RSS
interface implementation and testing.
Change-Id: I8f68157319399ab526f9e851b26dba903db5c2e7
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch removes RAS_FFH_SUPPORT macro which is the combination of
ENABLE_FEAT_RAS and HANDLE_EA_EL3_FIRST_NS. Instead introduce an
internal macro FFH_SUPPORT which gets enabled when platforms wants
to enable lower EL EA handling at EL3. The internal macro FFH_SUPPORT
will be automatically enabled if HANDLE_EA_EL3_FIRST_NS is enabled.
FFH_SUPPORT along with ENABLE_FEAT_RAS will be used in source files
to provide equivalent check which was provided by RAS_FFH_SUPPORT
earlier. In generic code we needed a macro which could abstract both
HANDLE_EA_EL3_FIRST_NS and RAS_FFH_SUPPORT macros that had limitations.
Former was tied up with NS world only while the latter was tied to RAS
feature.
This is to allow Secure/Realm world to have their own FFH macros
in future.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ie5692ccbf462f5dcc3f005a5beea5aa35124ac73
As part of migrating RAS extension to feature detection mechanism, the
macro ENABLE_FEAT_RAS was allowed to have dynamic detection (FEAT_STATE
2). Considering this feature does impact execution of EL3 and we need
to know at compile time about the presence of this feature. Do not use
dynamic detection part of feature detection mechanism.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I23858f641f81fbd81b6b17504eb4a2cc65c1a752
Disable FEAT_MPAM support for Aarch32 as it is not supported, following
[1]. ENABLE_FEAT_MPAM is set to 2 by default for Aarch64 in
arch_features.mk, eliminating the need for duplication in the platform
makefile.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/23710
Change-Id: I1c8b6844254e00e6372900f1c87f995f292ae65c
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
With changes to refactor to use first platform makefiles
then parse arch_features.mk file 'ENABLE_RME' will be initialised
only when we define during build or at arch_features.mk thus
making comparison of 'ENABLE_RME' to '0' incorrect.
So keep BRBE disabled when RME is enabled at main makefile level.
Change-Id: I7e3d99eb444678d63585bd5971ada627cfc4fcc9
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
The firmware handoff framework is a light weight mechanism for sharing
information between bootloader stages. Add support for this framework at
the handoff boundary between runtime firmware BL31 and NS software on FVP.
Change-Id: Ib02e0e4c20a39e32e06da667caf2ce5a28de1e28
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Since FVP does not support RSS, RSS APIs used to provide the hardcoded
platform token and attestation key. However, that seems to be causing
un-necessary mandating of some PSA crypto definitions, that doesn't
seem appropriate.
Hence to retrieve platform token and realm attestation key, these
RSS APIs calls have been replaced with hardcoded information.
Change-Id: I5fd091025e3444a698b9d387763ce20db6b13ae1
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Adding basic CPU library code to support Travis CPU
Change-Id: I3c85e9fab409325d213978888a8f6d6949291258
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
