Cortex-A715 erratum 2413290 is a Cat B erratum that is present
only in revision r1p0 and is fixed in r1p1. The errata is only
present when SPE(Statistical Profiling Extension) is enabled.
The workaround is to set bits[58:57] of the CPUACTLR_EL1 to 'b11
when SPE is enabled, ENABLE_SPE_FOR_NS=1.
SDEN documentation:
https://developer.arm.com/documentation/SDEN2148827/latest
Change-Id: Iaeb258c8b0a92e93d70b7dad6ba59d1056aeb135
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Cortex-X4 erratum 2701112 is cat B erratum that applies to
revision r0p0 and is fixed in r0p1. This erratum affects
system configurations that do not use an Arm interconnect IP.
The workaround for this erratum is not implemented in EL3.
The erratum can be enabled/disabled on a platform level.
The flag is used when the errata ABI feature is enabled and can
assist the Kernel in the process of mitigation of the erratum.
SDEN Documentation:
https://developer.arm.com/documentation/SDEN2432808/latest
Change-Id: I8ede1ee75b0ea1658369a0646d8af91d44a8759b
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Remove any residual RSS usage in the FVP platform, complementing the
changes made in commit dea307fd6c.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I9ced272503456361610ec0c7783d270349233926
Essentially revert [1] to permit specifying SME support along with
SPD=spmd on FVP platform.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/20764
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Iab15d5a4c966b9f5b265ccde6711765e242abeaa
This setup helps to mimic an end-to-end RAS handling flow inspired
by real world design with a dedicated RAS secure partition managed
by SPMC.
The detailed steps are documented as comments in the relevant source
files introduced in this patch.
Change-Id: I97737c66649f6e49840fa0bdf2e0af4fb6b08fc7
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This feature provides support to context save the
SCXTNUM_ELx register. FEAT_CSV2_3 implies the implementation
of FEAT_CSV2_2. FEAT_CSV2_3 is supported in AArch64 state only
and is an optional feature in Arm v8.0 implementations.
This patch adds feature detection for v8.9 feature FEAT_CSV2_3,
adds macros for ID_AA64PFR0_EL1.CSV2 bits [59:56] for detecting
FEAT_CSV2_3 and macro for ENABLE_FEAT_CSV2_3.
Change-Id: Ida9f31e832b5f11bd89eebd6cc9f10ddad755c14
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Removed RSS usage from the Base AEM FVP platform, as it wasn't
functional on this platform. The Base AEM FVP platform lacks
support for RSS.
Instead, the TC2 platform with RSS is available for actual RSS
interface implementation and testing.
Change-Id: I8f68157319399ab526f9e851b26dba903db5c2e7
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch removes RAS_FFH_SUPPORT macro which is the combination of
ENABLE_FEAT_RAS and HANDLE_EA_EL3_FIRST_NS. Instead introduce an
internal macro FFH_SUPPORT which gets enabled when platforms wants
to enable lower EL EA handling at EL3. The internal macro FFH_SUPPORT
will be automatically enabled if HANDLE_EA_EL3_FIRST_NS is enabled.
FFH_SUPPORT along with ENABLE_FEAT_RAS will be used in source files
to provide equivalent check which was provided by RAS_FFH_SUPPORT
earlier. In generic code we needed a macro which could abstract both
HANDLE_EA_EL3_FIRST_NS and RAS_FFH_SUPPORT macros that had limitations.
Former was tied up with NS world only while the latter was tied to RAS
feature.
This is to allow Secure/Realm world to have their own FFH macros
in future.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ie5692ccbf462f5dcc3f005a5beea5aa35124ac73
As part of migrating RAS extension to feature detection mechanism, the
macro ENABLE_FEAT_RAS was allowed to have dynamic detection (FEAT_STATE
2). Considering this feature does impact execution of EL3 and we need
to know at compile time about the presence of this feature. Do not use
dynamic detection part of feature detection mechanism.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I23858f641f81fbd81b6b17504eb4a2cc65c1a752
Disable FEAT_MPAM support for Aarch32 as it is not supported, following
[1]. ENABLE_FEAT_MPAM is set to 2 by default for Aarch64 in
arch_features.mk, eliminating the need for duplication in the platform
makefile.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/23710
Change-Id: I1c8b6844254e00e6372900f1c87f995f292ae65c
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
With changes to refactor to use first platform makefiles
then parse arch_features.mk file 'ENABLE_RME' will be initialised
only when we define during build or at arch_features.mk thus
making comparison of 'ENABLE_RME' to '0' incorrect.
So keep BRBE disabled when RME is enabled at main makefile level.
Change-Id: I7e3d99eb444678d63585bd5971ada627cfc4fcc9
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
The firmware handoff framework is a light weight mechanism for sharing
information between bootloader stages. Add support for this framework at
the handoff boundary between runtime firmware BL31 and NS software on FVP.
Change-Id: Ib02e0e4c20a39e32e06da667caf2ce5a28de1e28
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Since FVP does not support RSS, RSS APIs used to provide the hardcoded
platform token and attestation key. However, that seems to be causing
un-necessary mandating of some PSA crypto definitions, that doesn't
seem appropriate.
Hence to retrieve platform token and realm attestation key, these
RSS APIs calls have been replaced with hardcoded information.
Change-Id: I5fd091025e3444a698b9d387763ce20db6b13ae1
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Adding basic CPU library code to support Travis CPU
Change-Id: I3c85e9fab409325d213978888a8f6d6949291258
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Restricts MPAM to only NS world and enables trap to EL3 for access of
MPAM registers from lower ELs of Secure and Realm world.
This patch removes MPAM enablement from global context and adds it to
EL3 State context which enables/disables MPAM during world switches.
Renamed ENABLE_MPAM_FOR_LOWER_ELS to ENABLE_FEAT_MPAM and
removed mpam_init_el3() as RESET behaviour is trapping.
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I131f9dba5df236a71959b2d425ee11af7f3c38c4
Convert any used tabs in arch_features.mk to spaces to avoid makefile
build issues. Only recipes should be indented with tabs.
ENABLE_TRBE_FOR_NS should be enabled only for aarch64 but accidentally
its enabled for aarch32 as well in FVP makefile.
Change-Id: Iee913a04d6b60a4738183a17421754c2638e8e6d
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
This patch introduces an SiP SMC call for FVP platform to set an
interrupt pending. This is needed for testing purposes.
Change-Id: I3dc68ffbec36d90207c30571dc1fa7ebfb75046e
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This patch enables Scalable Matrix Extension (SME) for RMM. RMM will
save/restore required registers that are shared with SVE/FPU register
state so that Realm can use FPU or SVE.
The Relevant RMM support can be found here :
https://github.com/TF-RMM/tf-rmm/commit/0ccd7ae58b00
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I3bbdb840e7736dec00b71c85fcec3d5719413ffd
Adding basic CPU library code to support Nevis CPU
Change-Id: I399cc9b7b2d907b02b76ea2a3e5abb54e28fbf6c
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
If AACRH32_SP is not specified, it causes the DEFAULT_LINKER_SCRIPT
variable to be empty, and then the linker takes the variable following
it as if it was the linker script, which is not one. This patch
addresses that issue by requiring the AARCH32_SP variable to be set
before continuing.
Change-Id: I21db7d5bd86b98faaa1a1cd3f985daa592556a2d
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
This patch adds the necessary CPU library code to support the Gelas CPU
Change-Id: I13ec4a8bb7055c1ebd0796a4a1378983d930fcb3
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
In some build configurations TF-A can exceed the existing 256KB SRAM,
triggering a build failure. More recent versions of the base FVP allow
you to configure a larger Trusted SRAM of 512KB.
This change introduces the `FVP_TRUSTED_SRAM_SIZE` build option, which
allows you to explicitly specify how much of the Trusted SRAM to
utilise, e.g.:
FVP_TRUSTED_SRAM_SIZE=384
This allows previously-failing configurations to build successfully by
utilising more than the originally-allocated 256KB of the Trusted SRAM
while maintaining compatibility with older configurations/models that
only require/have 256KB.
Change-Id: I8344d3718564cd2bd53f1e6860e2fe341ae240b0
Signed-off-by: Chris Kay <chris.kay@arm.com>
So far, the FVP platform.mk file did not include the corresponding file
for Cortex-A78AE, causing the FVP to hang when executing the
plat_reset_handler function. The file is now included to address the
problem and to allow the new CI config for Cortex-A78AE to work
properly.
Change-Id: I8dd460831b354d8ca54841d5561df40ff193ee06
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
At the moment we only support FEAT_RAS to be either unconditionally
compiled in, or to be not supported at all.
Add support for runtime detection (FEAT_RAS=2), by splitting
is_armv8_2_feat_ras_present() into an ID register reading function and
a second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we access RAS related registers.
Also move the context saving code from assembly to C, and use the new
is_feat_ras_supported() function to guard its execution.
Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.
Change-Id: I30498f72fd80b136850856244687400456a03d0e
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
The current usage of RAS_EXTENSION in TF-A codebase is to cater for two
things in TF-A :
1. Pull in necessary framework and platform hooks for Firmware first
handling(FFH) of RAS errors.
2. Manage the FEAT_RAS extension when switching the worlds.
FFH means that all the EAs from NS are trapped in EL3 first and signaled
to NS world later after the first handling is done in firmware. There is
an alternate way of handling RAS errors viz Kernel First handling(KFH).
Tying FEAT_RAS to RAS_EXTENSION build flag was not correct as the
feature is needed for proper handling KFH in as well.
This patch breaks down the RAS_EXTENSION flag into a flag to denote the
CPU architecture `ENABLE_FEAT_RAS` which is used in context management
during world switch and another flag `RAS_FFH_SUPPORT` to pull in
required framework and platform hooks for FFH.
Proper support for KFH will be added in future patches.
BREAKING CHANGE: The previous RAS_EXTENSION is now deprecated. The
equivalent functionality can be achieved by the following
2 options:
- ENABLE_FEAT_RAS
- RAS_FFH_SUPPORT
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I1abb9ab6622b8f1b15712b12f17612804d48a6ec
Errata ABI feature specific build flag, flag to enable
CPUs in the cpu list, flags to test non-arm interconnect based
errata flags when enabled from a platform level.
Added to the FVP platform makefile to test the errata abi feature
implementation.
The flags to enable CPUs in the cpu list will be removed once
synchronized with the errata framework.
Change-Id: I30877a22ac1348906a6ddfb26f9e8839912d3572
Signed-off-by: Sona Mathew <SonaRebecca.Mathew@arm.com>
While doing RAS related tests there were few patches related with
fault injection and handling were applied through CI hooks.
These patches were invisible as they were applied and removed after the
build is done.
This patch introduces build macro PLATFORM_TEST_RAS_FFH and moves the
patches applied through CI under this.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Iddba52f3ebf21f575a473e50c607a944391156b9
* changes:
docs(spm): support for handling Group0 interrupts
feat(spmd): introduce platform handler for Group0 interrupt
feat(spmd): add support for FFA_EL3_INTR_HANDLE_32 ABI
feat(spmd): register handler for group0 interrupt from NWd
This patch introduces a handler for FVP platform to triage Group0
secure interrupts. Currently, it is empty but serves as a
placeholder for future Group0 interrupt sources.
Moreover, this patch also provides a dummy implementation of the
above mentioned platform hook for QEMU, corstone100, n1sdp and
hikey960 ports.
Change-Id: I01d3451408f47ac313b0af74046cce89f89b85bb
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
SPMD is not compatible with ENABLE_SME_FOR_NS.
Hence disable SME when SPD=spmd
Change-Id: I8bcf2493819718732563f9db69f7186ac7437637
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
FVP currently does not have proper handler to do Firmware First Handling
(FFH) of lower EL External aborts and it ends up in EL3 panic.
To test the scenarios sensibly we need a proper handling when the FVP is
under test so that we do not change the default behavior.
Introduce PLATFORM_TEST_EA_FFH config which will be enabled in CI
scripts and implement a proper handling for Sync EA and SErrors from
lower EL.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib130154206b17f72c49c9f07de2d92f35a97ab0b
FEAT_SME2 is an extension of FEAT_SME and an optional feature
from v9.2. Its an extension of SME, wherein it not only
processes matrix operations efficiently, but also provides
outer-product instructions to accelerate matrix operations.
It affords instructions for multi-vector operations.
Further, it adds an 512 bit architectural register ZT0.
This patch implements all the changes introduced with FEAT_SME2
to ensure that the instructions are allowed to access ZT0
register from Non-secure lower exception levels.
Additionally, it adds support to ensure FEAT_SME2 is aligned
with the existing FEATURE DETECTION mechanism, and documented.
Change-Id: Iee0f61943304a9cfc3db8f986047b1321d0a6463
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
The fvp build includes a very large number of cpus so that it can run on
a wide range of models. One config (HW_ASSISTED_COHERENCY=1
CTX_INCLUDE_AARCH32_REGS=0) includes an unusually large number of cpus.
Well, the list is quite arbitrary and incomplete. As we're currently out
of BL31 space on the fvp, remove all that are not routinely run in the
CI to buy us some time.
Also use the opportunity to reorder the list into something searchable.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I8c6cad41327451edf0d3a0e92c43d6c72c254aac
At the moment we only support FEAT_DIT to be either unconditionally
compiled in, or to be not supported at all.
Add support for runtime detection (ENABLE_DIT=2), by splitting
is_armv8_4_dit_present() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed).
We use ENABLE_DIT in two occassions in assembly code, where we just set
the DIT bit in the DIT system register.
Protect those two cases by reading the CPU ID register when ENABLE_DIT
is set to 2.
Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.
Change-Id: I506d352f18e23c60db8cdf08edb449f60adbe098
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Arm v9.4 introduces support for Guarded Control Stack, providing
mitigations against some forms of RPO attacks and an efficient mechanism
for obtaining the current call stack without requiring a full stack
unwind. Enable access to this feature for EL2 and below, context
switching the newly added EL2 registers as appropriate.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I691aa7c22e3547bb3abe98d96993baf18c5f0e7b
Arm v8.9 introduces a series of features providing a new way to set memory
permissions. Instead of directly encoding the permissions in the page
tables the PTEs contain indexes into an array of permissions stored in
system registers, allowing greater flexibility and density of encoding.
Enable access to these features for EL2 and below, context switching the
newly added EL2 registers as appropriate. Since all of FEAT_S[12]P[IO]E
are separately discoverable we have separate build time options for
enabling them, but note that there is overlap in the registers that they
implement and the enable bit required for lower EL access.
Change the FVP platform to default to handling them as dynamic options so
the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: Icf89e444e39e1af768739668b505661df18fb234
Add basic CPU library code to support the Blackhawk CPU,
BlackHawk core is based out of Hunter ELP core,
so overall library code was adapted based on that.
Change-Id: I4750e774732218ee669dceb734cd107f46b78492
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
