The get rate callback is needed for s32cc_fixed_div to allow the
frequency compilation for modules attached to a fixed divider like
LINFLEXD_CLK.
Change-Id: Ibc3e52f7f1127bba0dd793be0a26bdff15260824
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add the option to obtain the rate of an s32cc_dfs_div object. As in the
case of the PLL, the output divider of a DFS will return its targeted
frequency if the module is disabled and calculate the rate based on the
settings found in its registers if the module is turned on.
Change-Id: Id6db92dbdf03f8119875476ad8f7aa268ff6ea93
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add the option to obtain the rate of an s32cc_dfs object. The DFS rate
depends on the module to which it's connected. Therefore, it will always
return the rate of its parent.
Change-Id: Ie3becd36721f541d0fab11b2fb57aacd66d48220
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add the option to obtain the rate of an s32cc_pll object. The rate of
the PLL can be obtained regardless of its hardware state. The targeted
frequency is returned in case the PLL is off. Otherwise, the frequency
is determined based on settings found in its registers.
Change-Id: Id200d0eff149109a724eee69b063bf750d5cba2e
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add the option to obtain the rate of an s32cc_clk object. s32cc_clk are
usually links to either another s32cc_clk or a different clock module.
Therefore, this function routes the request.
Change-Id: I0c1174cb861d2062882319e46cb6ca97bad70aab
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Replace the dummy implementation of clk_ops.get_rate with a basic
version that only handles the oscillator objects. Subsequent commits
will add more objects to this list.
Change-Id: I8c1bbbfa6b116fdcf5a1f1353bdb52b474bac831
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
* changes:
fix(versal2): modify function to have single return
fix(versal-net): modify function to have single return
fix(versal): modify function to have single return
fix(xilinx): modify function to have single return
fix(zynqmp): modify function to have single return
fix(versal-net): add unsigned suffix to match data type
fix(versal): add unsigned suffix to match data type
fix(versal2): add missing curly braces
fix(versal-net): add missing curly braces
fix(zynqmp): add missing curly braces
The details specified under "Design" section with regard to
enhancing the context_management library specifies the information
on introducing root_context.
This design has been through several discussions and based on its
outcome, library has been enhanced.
The updated information covering all the aspects with regard to
implementation is listed under "Components" section.
https://trustedfirmware-a.readthedocs.io/en/latest/components/context-management-library.html
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I2cf3ccd8cd94444b90fdc627f45a72a4b6096638
- VCORE DVFS is the feature to change VCORE/DDR Freq for power saving
- When there are no requests for using Vcore/DRAM, Vcore DVFS will
- lower the voltage and frequency of Vcore/DRAM to achieve power saving.
Signed-off-by: Kunlong Wang <kunlong.wang@mediatek.com>
Change-Id: I1126311e8b3943cc54fb13e15973b9e1b74c129e
LPM means low power module, it will connect idle and SPM to achieve
lower power consumption in some scenarios, and this patch is LPM
second version
Signed-off-by: Wenzhen Yu <wenzhen.yu@mediatek.corp-partner.google.com>
Change-Id: I6ae5b5b4c2056d08c29efab5116be3a92351d8f1
This patch provides common APIs for communication with other subsystems
as well as common APIs for collecting the clock and power status of
each subsystem.
Signed-off-by: Wenzhen Yu <wenzhen.yu@mediatek.com>
Change-Id: I1b907256f53578a58d74d66beec7140edf41f687
This patch mainly initializes the SPM and provides common APIs for SPM
to enable the use of its various features.
Signed-off-by: Wenzhen Yu <wenzhen.yu@mediatek.com>
Change-Id: I9facb6bf9962bb2d5fcacd945846bfaeb4c87a55
This patch mainly collects and organizes SPM state information to
facilitate debugging when issues arise.
Signed-off-by: Wenzhen Yu <wenzhen.yu@mediatek.com>
Change-Id: Ie51cffeb1d683d65d88701fc63c426b20b22492f
When the system is in idle or suspend state, SPM will turn off some
unused system resources. This patch enables this feature to achieve
power saving.
Signed-off-by: Wenzhen Yu <wenzhen.yu@mediatek.com>
Change-Id: Ia9764b91073c4765d41fe7fcd8e4a21372c290f1
During suspend, it is necessary to set some power rails of the PMIC
to enter low power mode to achieve power saving.
Signed-off-by: Wenzhen Yu <wenzhen.yu@mediatek.com>
Change-Id: Iaeadd15270e0209f027fab80f478ad621bd59ea7
This corrects the MISRA violation C2012-15.5:
A function should have a single point of exit at the end.
Introduced a temporary variable to store the return value to
ensure single return for the function.
Change-Id: Ib152831e84f5ead5b57fd713ebfedb1f3340a727
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>
This corrects the MISRA violation C2012-15.5:
A function should have a single point of exit at the end.
Introduced a temporary variable to store the return value to
ensure single return for the function.
Change-Id: Ib8b3339f32031a3657f6c349763a20a99fd828e7
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>
This corrects the MISRA violation C2012-15.5:
A function should have a single point of exit at the end.
Introduced a temporary variable to store the return value to
ensure single return for the function.
Change-Id: Iffbd8770fd4ff2f2176062469d22961cbaa160b4
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>
This corrects the MISRA violation C2012-15.5:
A function should have a single point of exit at the end.
Introduced a temporary variable to store the return value to
ensure single return for the function.
Change-Id: Ice3eb939664ffc62c1f586b641e37481f10ffff6
Signed-off-by: Nithin G <nithing@amd.com>
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>
Add MCDI driver to manage CPU idle states and optimize power consumption.
Signed-off-by: Kai Liang <kai.liang@mediatek.com>
Change-Id: I3a2e163730dd997dd72f2ebc1375dea38d728cb7
And mcusys drivers to enhance CPU power state control.
Signed-off-by: Kai Liang <kai.liang@mediatek.com>
Change-Id: I7d84407cebc16a5ab23359781574e9d02e90c58b
Add Centralized Power Control (CPC) module to manage CPU power states.
Signed-off-by: Kai Liang <kai.liang@mediatek.com>
Change-Id: I212155143018141c89427032f6a7d21243e750b7
Add topology module to support CPU power state control.
Signed-off-by: Kai Liang <kai.liang@mediatek.com>
Change-Id: I0cc1e5a426762b1b29bff1e940e077643da02e5e
Add SPMI and PMIF driver for PMIC communication
Change-Id: Iad1d90381d6dad6b3e92fd9d6a3ce02fa11d15f1
Signed-off-by: Hope Wang <hope.wang@mediatek.corp-partner.google.com>
Ref: https://linaro.atlassian.net/browse/TFC-669
The initial LTS document was created as pdf and was maintained in a
shared folder location, to avoid pdf getting lost and trying to find
where it is we decided to have LTS details part of docs in TF-A.
This patch directly reflects the data from pdf attached to TFC-669.
Any improvements or amends to this will be done at later phases based
on LTS maintainers comments and agreements.
Change-Id: I1434c29f0236161d2a127596e2cc528bf4cc3e85
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
The commit a6485b2b3b ("refactor(delay-timer): add timer
callback functions") is breaking DCC console due to uninitialized
timer ops structure. Fix it by moving generic delay timer init
prior to console setup to make sure that time is setup before DCC
console setup.
Fixes: a6485b2b3b ("refactor(delay-timer): add timer callback
functions")
Change-Id: I67910332773741c0b08f02feb232efab6356db12
Signed-off-by: Saivardhan Thatikonda <saivardhan.thatikonda@amd.com>
After the change to allow overriding platform specific defaults [1],
the PLAT macro is forced to DEFAULT_PLAT in plat_helpers.mk. But this
makefile is also called for tools. For example in fiptool makefile, as
PLAT is reset to default plat (fvp), we cannot use specific platforms
plat_fiptool.mk files. Put back the setting of PLAT macro in Makefile.
[1]: 1b2fb6adb5 feat(build): add ability to define platform specific
defaults
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iadf8bc7fc831a728a9688d0afdd163c8dda737e5
Move console_switch_state(CONSOLE_FLAG_RUNTIME) to sp_min_main() so
that this becomes the last call before bl32/sp_min exits. This also
ensures that console_flush() is called before switching console state
to runtime.
This patch mimics the behavior of console_switch_state() call in BL31
per this patch
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/26771/4.
Change-Id: I5b562d02706b19bb8b14154be97b6e9ef4e2fd3b
Signed-off-by: Salman Nabi <salman.nabi@arm.com>
* changes:
perf(psci): pass my_core_pos around instead of calling it repeatedly
refactor(psci): move timestamp collection to psci_pwrdown_cpu
refactor(psci): factor common code out of the standby finisher
refactor(psci): don't use PSCI_INVALID_PWR_LVL to signal OFF state
docs(psci): drop outdated cache maintenance comment
This corrects the MISRA violation C2012-15.5:
A function should have a single point of exit at the end.
Introduced a temporary variable to store the return value to
ensure single return for the function.
Change-Id: Ibff3df16b4c591384467771bc7cb316f1773f1ea
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>
Update DDR address map of BL32, BL33 and transfer list to support
AMD Versal Gen 2 platform's new memory map.
Change-Id: I757b2f67270034c8a3140e4bb0ac4d7e88b5d055
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>
The build macro no longer coverts variable names to uppercase.
We need to convert it to uppercase to pass it on.
Change-Id: If808fc77bce71d575e2d43ff83c4d9bcdcc52326
Signed-off-by: Gavin Liu <gavin.liu@mediatek.com>
FEAT_MOPS, mandatory from Arm v8.8, is typically managed in EL2.
However, in configurations where NS_EL2 is not enabled,
EL3 must set the HCRX_EL2.MSCEn bit to 1 to enable the feature.
This patch ensures FEAT_MOPS is enabled by setting HCRX_EL2.MSCEn to 1.
Change-Id: Ic4960e0cc14a44279156b79ded50de475b3b21c5
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
* changes:
feat(s32g274a): split early clock initialization
feat(s32g274a): enable MMU for BL31 stage
feat(s32g274a): dynamically map GIC regions
feat(s32g274a): enable MMU for BL2 stage
feat(s32g274a): dynamically map siul2 and fip img
feat(s32g274a): map each image before its loading
feat(nxp-clk): dynamic map of the clock modules
feat(s32g274a): increase the number of MMU regions
feat(s32g274a): add console mapping
For a couple of releases now we have officially withdrawn support for
building TF-A on Windows using the native environment, relying instead
on POSIX emulation layers like MSYS2, Mingw64, Cygwin or WSL.
This change removes the remainder of the OS compatibility layer
entirely, and migrates the build system over to explicitly relying on a
POSIX environment.
Change-Id: I8fb60d998162422e958009afd17eab826e3bc39b
Signed-off-by: Chris Kay <chris.kay@arm.com>
Initializing all early clocks before the MMU is enabled can impact boot
time. Therefore, splitting the setup into A53 clocks and peripheral
clocks can be beneficial, with the peripheral clocks configured after
fully initializing the MMU.
Change-Id: I19644227b66effab8e2c43e64e057ea0c8625ebc
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Enable the MMU and add two entries to map the BL31 code and data
regions. Additional mappings will be added dynamically, enhancing
flexibility and modularity during the porting process.
Change-Id: I333c34c58274a115f62f54730bba5b71165e3e36
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
