Switching to higher CPU frequencies requires a dedicated chip version
(STM32MP1xxD or STM32MP1xxF), and increase CPU voltage. To avoid
re-configuring I2C and PMIC before and after applying clock tree,
always boot at 650MHz, which is the frequency for nominal voltage.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Id05a3ee17e7dd57e2d64dc06f8f1e7f9cb21e110
As these definitions will be the same for STM32MP1 and STM32MP2, move
PLATFORM_MTD_MAX_PAGE_SIZE and DWL_BUFFER_SIZE macro definition to the
file: plat/st/common/include/stm32mp_common.h
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I480669d009d15fec753298f47b136e34fa240132
This is something commonly asked by Linux kernel DT maintainers [1].
The mentioned doc is not upstreamed, but may be checked with dtbs_check.
While at it align some nodes with Linux or OP-TEE.
[1] https://lore.kernel.org/linux-arm-kernel/20231125184422.12315-1-krzysztof.kozlowski@linaro.org/
Change-Id: I63e983c2a00eda3cd8b81c66c0cd1a97cf8249b7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is an alignment with Linux DT files that have been merged in
stm32 tree [1], and will be in Linux 6.7.
The /omit-if-no-ref/ in overlay files are now removed, as already in
pinctrl files.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iab94b0ba7a4a0288ca53d1ae57ab590566967415
Rename PLAT_NB_FIXED_REGS to PLAT_NB_FIXED_REGUS.
This avoids confusion with regulators and registers.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Change-Id: Idb2de7204fe978ffcdd729e6cbe453e85fd089b5
Those storage macros are common to all STM32MPU chips, move them to
plat/st/common/include/stm32mp_io_storage.h
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id20ec00ba65edf9ec7a3a89adfda307c954c3cb6
Those specific SDMMC definitions are only used in stm32_sdmmc2.c driver.
Move them there.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iac7e505e9421aa7630bee8ce6fc2277b98581995
Device tree alignment with kernel and latest binding for BSEC node:
the rev2.0 is used on STM32MP13x devices with the new compatible
compatible = "st,stm32mp13-bsec".
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I76f86f2951eff4af91d22dfb926969fd842a36ce
This backup register used to pass boot information to BL33, has the
same mapping for ST platforms. Its management can then be moved to
common directory.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ic873f099c1f87c6ba2825b4946365ae6a9687798
The code managing legacy boot (without FIP) that was under
STM32MP_USE_STM32IMAGE flag is remove.
Change-Id: I04452453ed84567b0de39e900594a81526562259
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the decryption support for STM32MP1 binaries.
Decryption is limited to the BL32 loaded images.
Limitation: STM32MP15 doesn't support the feature.
Change-Id: I96800bac7b22109f8471eb2953fc0dc269fc4fd1
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add the support of the TRUSTED_BOARD_BOOT to authenticate the loaded
FIP using platform CoT management.
It adds TBB platform definition, redefining the standard image ID in
order to decrease requested size in BL2 binary.
Authentication will use mbedTLS library for parsing certificate
configured with a platform configuration.
Change-Id: I9da66b915c5e9e9293fccfce92bef2434da1e430
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Remove deprecated authentication mode to use the FIP authentication
based on TBBR requirements. It will use the new crypto library.
Change-Id: I95c7baa64ba42c370ae136f59781f2a7a4c7f507
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Move the definition of DT_UART_COMPAT in stm32mp1_def.h to be used
in several files.
Change-Id: I74d0350bcd971df9b15697f2b9ec04061d6a7656
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
On STM32MP13, 2 OTP fuses can be used to configure NAND devices.
By default OTP CFG9 is used for sNAND. A new OTP (CFG10) is used
to configure raw NAND. Thanks to bit 0 of CFG10 OTP, this default
configuration can be switched.
For sNAND on STM32MP13, the NAND_PARAM_STORED_IN_OTP is not used.
The sNAND parameters have to be taken from OTP bits.
Change-Id: Ib95e0f9b9e66179a58b07f723ea01dce68b96475
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Override the default platform function to use an external buffer
on STM32MP13 platform.
It allows to use a temporary buffer located at the SRAM1 memory end.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ibd84bb336c60af24608268916b3a18bb5a0fa3db
The new SoC version for STM32MP13 is the revision Y. The register
SYSCFG_IDC is updated for this new version with the value 0x1003.
The function stm32mp_get_soc_name() should also be updated to manage
this new SoC revision.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4f2fa5f1503f17db93d8413c79c2b7a18d279f9b
On STM32MP13, USART1 and USART2 addresses are 0x4C000000 and 0x4C001000.
Whereas on STM32MP15, the addresses were 0x5C000000 and 0x4000E000.
Use dedicated flags to choose the correct address, that could be use
for early or crash console.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I98bd97a0ac8b0408a50376801e2a1961b241a3d6
U-Boot is loaded at the beginning of the DDR:
STM32MP_DDR_BASE = 0xC0000000.
This patch remove the need to use the 0x100000 offset, reserved
on STM32MP15 for flashlayout.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I8d0a93f4db411cf59838e635a315c729cccee269
If we reboot 3 times in trial mode, BL2 will select previous boot image.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Change-Id: I82b423cc84f0471fdb6fa7c393fc5fe411d25c06
Simplify the DT parsing by removing the parsing of the nvmem layout node
with "st,stm32-nvmem-layout" compatible.
The expected OTP NAME can directly be found in a sub-node named
NAME@ADDRESS of the BSEC node, the NVMEM provider node.
This patch also removes this specific binding introduced for TF-A.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Ic703385fad1bec5bef1cee583fbe9fbbf6aea216
Add dedicated device tree files for STM32MP13.
Add new DDR compatible for STM32MP13x.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: Ib1bb9ad8cb2ab9f5f81549635d6604093aeb99d3
Add DT_SDMMC2_COMPAT define in stm32mp1_def.h file in platform.
It allows the use of the compatible in platform code.
Change-Id: I535ad67dd133bab59cf81881adaef42d8e88632c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This field is now declared on the 10 LSB bits on STM32MP13.
Several possible values are specified in the Reference Manual, and
indicate an open or closed device. Other values lead to a system panic.
Change-Id: I697124a21db66a56e7e223d601aa7cf44bb183c4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Add new clock driver for STM32MP13. Split the include file to manage
either STM32MP13 or STM32MP15.
Change-Id: Ia568cd12b1d5538809204f0fd2224d51e5d1e985
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
On STM32MP13, there is only 1 DDR port, hence only 1 TZC400 filter.
Change-Id: I4f6750022cdaf658cd209a4bf48a6cdb0717020e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Increase the fixed regulator number that needs to be
2 for STM32MP13.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ica990fe9a6494b76aed763d2d353f5234fed7cea
The header must now include by default at least an extra padding
header, increasing the size of the header to 512 bytes (0x200).
This header will be placed at the end of SRAM3 by BootROM, letting
the whole SYSRAM to TF-A.
The boot context is now placed in SRAM2, hence this memory has to be
mapped in BL2 MMU. This mapping is done for all SRAMs in a 2MB area.
Change-Id: I50fcd43ecd0ba2076292b057566efe6809b9971a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the IP addresses that are STM32MP13 and update the ones for
which the base address has changed.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iea71a491da36f721bfd3fbfb010177e2a6a57281
Add the new part numbers and adapt the functions that use them.
There is no package number in OTP as they all share the same GPIO
banks.
This part is then stubbed for STM32MP13.
Change-Id: I13414326b140119aece662bf8d82b387dece0dcc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP13, the chip revision Z is 0x1001, contrary to STM32MP15,
for which it was 0x2001.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: If65482e824b169282abb5e26ca91e16ef7640b52
* GPIO: On STM32MP13, there are no banks GPIOJ, GPIOK and GPIOZ.
* STM32MP13 is a single Cortex-A7 CPU: remove reset from MPU1
and reset from MCU traces
* There is no MCU on STM32MP13. Put MCU security management
under STM32MP15 flag.
* The authentication feature is not supported yet on STM32MP13,
put the code under SPM32MP15 flag.
* On STM32MP13, the monotonic counter is managed in ROM code, keep
the monotonic counter update just for STM32MP15.
* SYSCFG: put registers not present on STM32MP13 under STM32MP15
flag, as the code that manages them.
* PMIC: use ldo3 during DDR configuration only for STM32MP15
* Reset UART pins on USB boot is no more required.
Change-Id: Iceba59484a9bb02828fe7e99f3ecafe69c837bc7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
SYSRAM is only 128KB and starts at 0x2FFE0000.
SRAMs are added.
BL2 code and DTB sizes are also reduced to fit in 128KB.
Change-Id: I25da99ef5c08f8008ff00d38248d61b6045adad4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I000df70c10b2b4dac1449556596f9820c36cf243
tamp_bkpr() returns a register address. So use uintptr_t instead of
uin32_t.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Change-Id: I5eddfa525465313dadfec18d128248a968ba74e2
From the new binding, the RCC become secured based on the new
compatible. This must be done only from the secure OS initialisation.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I7f0a62f22bfcca638ddaefc9563df00f89f01653
The monotonic counter is stored in an OTP fuse.
A check is done in TF-A.
If the TF-A version is incremented, then the counter will be updated
in the corresponding OTP.
Change-Id: I6e7831300ca9efbb35b4c87706f2dcab35affacb
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Use dt_find_otp_name() to retrieve platform OTP information
from device tree, directly or through stm32_get_otp_index() and
stm32_get_otp_value() platform services.
String definitions replace hard-coded values, they are used to call
this new function.
Change-Id: I81213e4a9ad08fddadc2c97b064ae057a4c79561
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Used by driver parsing this node to get information.
Change-Id: I50623a497157adf7b9da6fafe8d79f6ff58c0ebc
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Remove stm32mp_incr_shrefcnt(), stm32mp_decr_shrefcnt(),
stm32mp_incr_refcnt() and stm32mp_decr_refcnt() that are unused.
The file is then just removed.
Change-Id: I09ee23c02317df5d8f71cbc355d3ed4a67ce2749
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use STM32MP_HEADER_RESERVED_SIZE macro instead of a fixed value 0x3000
in linker script.
Change-Id: I2702285c15aebaa1304a891c8aaabc949a912ba6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Simplify the BL2 MMU mapping and reduce the memory regions
number. Split the XLAT define between BL2 and BL32 as binaries
do not share the same tables anymore.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaf09e72b4cc29acbe376f6f1cd2a8116c793ba26
This allows reducing MMU tables, and as there is nothing after ROM code
in memory mapping, this has no impact.
Change-Id: If51facb96a523770465cb06eb1ab400f75d26db3
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
stm32mp_ddrctl structure contains DDRCTRL registers definitions.
stm32mp_ddr_info contains general DDR information extracted from DT.
stm32mp_ddr_size moves to the generic side.
stm32mp1_ddr_priv contains platform private data.
stm32mp_ddr_dt_get_info() and stm32mp_ddr_dt_get_param() allow to
retrieve data from DT. They are located in new generic c/h files in
which stm32mp_ddr_param structure is declared. Platform makefile
is updated.
Adapt driver with this new classification.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I4187376c9fff1a30e7a94407d188391547107997
Add the USB descriptor, the struct used for USB enumeration with
the function usb_dfu_plat_init().
The USB support is based on the usb lib and on the stm32mp1 usb driver.
The content of enumeration (the string descriptor) is identical to
ROM code to avoid the USB reset en re-enumeration needs.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I18b40649e8df83813a5a340b0eee44c9a3470e43
Add the reset set/clear sequence at the beginning of the function
plat_crash_console_init(). If not done, there is a risk that the UART
is in a bad state and will not be able to print correct characters.
Change-Id: Id31e28773d6c4f26f16d3569d1e3c5aa0e26e039
Signed-off-by: Yann Gautier <yann.gautier@st.com>
