* changes:
feat(stm32mp2-fdts): add board ID OTP in STM32MP257F-EV1
feat(stm32mp2-fdts): add OTP nodes in STM32MP251 SoC DT file
fix(stm32mp2): add missing include
feat(st): do not directly call BSEC functions in common code
feat(st): use stm32_get_otp_value_from_idx() in BL31
refactor(st): update test for closed chip
refactor(st-bsec): improve BSEC driver
refactor(st): use dashes for BSEC node names
Add CCA CoT DTB and rename generic CoT DTB to TBBR CoT DTB
This allows CCA platforms to get their chain of trust description
from a configuration file, rather than hard-coding it into the
firmware itself.
Change-Id: I114788a5d21b9a8d625239cfb71b442d204e3654
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Ad the board ID OTP node for the STM32MP257F-EV1 board.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I394b27f50a8f45c919a1e907e03572b25d958ae4
Add the BSEC node in STM32MP25 device tree file, with the OTP fuses
that will be used by TF-A.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I1ffdbd17829f4adf7b113ae0bec7547a6d1b4bac
This is something commonly asked by Linux kernel DT maintainers [1].
The mentioned doc is not upstreamed, but may be checked with dtbs_check.
While at it align some nodes with Linux or OP-TEE.
[1] https://lore.kernel.org/linux-arm-kernel/20231125184422.12315-1-krzysztof.kozlowski@linaro.org/
Change-Id: I63e983c2a00eda3cd8b81c66c0cd1a97cf8249b7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add virtio-net and virtio-9p devices to the devicetree without the
status set. This ensures that the MMIO frame is set, and it is not
fatal to start the driver initialisation procedure, which will
typically bail out if it finds zero virtqueues.
Add the virtio-rng device with status disabled. The disabled status
is chosen because the FVP models have only supported this since 2022
and older models would trigger an external abort when trying to access
or probe this MMIO region.
This is included by the fvp-base devicetrees.
Change-Id: Ia0a853533bb5d619a3d415e35b3217ad3a978ada
Signed-off-by: Diego Sueiro <Diego.Sueiro@arm.com>
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Add stdout-path to the fvp-base devicetree to be passed to BL33 (U-Boot)
and then to the Linux kernel to be compliant to Arm SystemReady IR:
https://developer.arm.com/documentation/DUI1101/2-0/
Configure-U-Boot-for-SystemReady/Adapt-the-Devicetree
This has been tested by booting fvp-base to Linux and ensuring the
console is accessible.
Change-Id: Iae98630f18f735ce344c1158f41f358c2a49eeb6
Signed-off-by: Diego Sueiro <Diego.Sueiro@arm.com>
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
This is an alignment with Linux DT files that have been merged in
stm32 tree [1], and will be in Linux 6.7.
The /omit-if-no-ref/ in overlay files are now removed, as already in
pinctrl files.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iab94b0ba7a4a0288ca53d1ae57ab590566967415
Three packages exist for stm32mp25 dies. As ball-out is different
between them, this patch covers those differences by introducing
dedicated pinctrl dtsi files. Each dtsi pinctrl package file
describes the package ball-out through gpio-ranges.
Available packages are:
STM32MP25xAI: 18*18/FCBGA 172 ios
STM32MP25xAK: 14*14/FCBGA 144 ios
STM32MP25xAL: 10*10/TFBGA 144 ios
It includes also the common file used for pin groups definition.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I8500ccccb7a96748f36ffc80edc91da8595f4da8
STM32MP25 family is composed of 4 SoCs defined as following:
-STM32MP251: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, PCIe, USB3, parallel and DSI display,
1*ETH ...
-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH,
CAN-FD and LVDS display.
-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).
A second diversity layer exists for security features/ A35 frequency:
-STM32MP25xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Change-Id: Icd1351e20b862675d257dede55df190a90acbd59
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The build flags to enable the Arm(R) Ethos(TM)-N NPU driver are in arm
platform specific make files i.e. plat/arm/common/arm_common.mk. These
flags are renamed and moved to ethosn_npu.mk. Other source and make
files are changed to reflect the changes in these flags.
Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Change-Id: I6fd20225343c574cb5ac1f0f32ff2fc28ef37ea6
Add support for Morello I2S audio subsystem. This includes adding the
audio formatter and I2S transmitter nodes and gluing them together with
the hdmi codec using a simple sound card machine node.
Change-Id: I3de4b06ef965c8e0555d074118b944fe6b4b78bb
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Signed-off-by: Faiz Abbas <faiz.abbas@arm.com>
Device tree alignment with kernel and latest binding for BSEC node:
the rev2.0 is used on STM32MP13x devices with the new compatible
compatible = "st,stm32mp13-bsec".
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I62c4090ae5d5c1de901e6df1e8ea5d1a3296a272
To keep (as much as possible) alignment with Linux DT, move the
/omit-if-no-ref/ keywords to DT overlay files (fdts/stm32mp1*-bl*.dtsi).
This also ease checks for ST tools.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ib467a6b65f05a84c9678799ad32e1820249b4ed1
Use /omit-if-no-ref/ keyword in DT to remove extra device nodes only
when they are not used / not referenced.
If the board device tree only defines subnodes, dtc does not consider it
as usage, you have to specifically mention device's phandle, e.g.:
\ {
i2c6-phandle = <&i2c6>;
};
or in aliases section
aliases {
i2c6 = &i2c6;
};
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I431ecd93576f97fd021d82d23b93c659fc8f26b8
Adds additional asset allocators to the device tree include
file as the non-secure world kernel module for the Arm(R)
Ethos(TM)-N NPU now fully supports having and using multiple
asset allocators.
Signed-off-by: Joshua Pimm <joshua.pimm@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I82d53667ef64968ee814f611d0a90abd3b3cf3de
With the /omit-if-no-ref/ keyword in DT, the non-referenced nodes
are just removed. This allows reducing the size of device tree blobs.
Setting it before pins node allows a size reduction of more than 2kB.
The corresponding nodes can also be removed from BL2 and BL32 DT
overlays.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I6b4a4d227d5592e1d253a1b35da2dafaac2ddcae
FVP PMUv3 SPIs legacy interrupts are only listed for
cluster #0 and are missing for cluster #1.
This patch changes FVP SPIs to PMUv3 PPI as in
arm_fpga.dtsi, morello.dtsi and n1sdp.dtsi.
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Change-Id: Ic624cec09ba932666c746ae1a6a4b78b6decde96
Add one device tree to support a family of boards (PRTT1C, PRTT1S,
PRTT1A) based on STM32MP151AAD3, used as sensors and actuators for
industrial, 10BaseT1L based networks.
This change was tested with barebox 2022.12.0 bootloader and kernel
v6.2.0-rc1.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Change-Id: Ibab9933eadd7aa379ae0a7c7ccbfc2fbb9a44ca8
The L3 cache in the DSU supports the Memory System Resources
Partitioning and Monitoring (MPAM). The MPAM specific registers in the
DSU are accessed through utility bus of DSU that are memory mapped from
0x1_0000_1000.
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
Change-Id: I2798181d599228e96dd4c0043a2ccd94668c7e20
* changes:
refactor(stm32mp15-fdts): remove unused PMIC nodes
fix(stm32mp15-fdts): use interrupts-extended for i2c2
style(stm32mp15-fdts): remove extra spaces on vbus
The onkey and watchdog features of the PMIC are not used in TF-A for
STM32MP15 boards. Remove the nodes from DT.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2933e0bdc5843fcb549a817742106d9c66097869
Update SoC DT file STM32MP151 to use interrupts-extended instead of
interrupts for i2c2. This correct a compilation warning:
build/stm32mp1/debug/fdts/stm32mp157c-ev1-bl2.pre.dts:23.3-26:
Warning (interrupts_property): /soc/i2c@40013000:#interrupt-cells:
size is (28), expected multiple of 12
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: If512807cd23c72f95e1e02b15f30d20a849d8412
Remove extra spaces before the closing brace of vbus_otg node in
stm32mp157c-ed1 DT file, before the vbus_sw label, and before the
closing brace of vbus_sw node.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2e77e0a043594876551ed8d77ed3d13f6a098c81
Increase TC_TZC_DRAM1_SIZE for Trusty image and its memory size.
Update OP-TEE reserved memory range in DTS
Change-Id: Iad433c3c155f28860b15bde2398df653487189dd
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
make it part of the restricted dma pool to ensure it is not used for
general dma operations.
Change-Id: Ia14738de70b4d7719d7460ed8d16e727aea8d8c4
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
This patch adds support for RMM granules allocation
in FVP 2nd DRAM 2GB bank at 0x880000000 base address.
For ENABLE_RME = 1 case it also removes "mem=1G"
Linux kernel command line option in fvp-base-psci-common.dsti
to allow memory layout discovery from the FVP device tree.
FVP parameter 'bp.dram_size' - size of main memory in gigabytes
documented in docs/components/realm-management-extension.rst
is changed from 2 to 4.
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Change-Id: I174da4416ad5a8d41bf0ac89f356dba7c0cd3fe7
The code managing legacy boot (without FIP) that was under
STM32MP_USE_STM32IMAGE flag is remove.
Change-Id: I04452453ed84567b0de39e900594a81526562259
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Remove the secure status for PKA and SAES entries.
The peripherals are used in BL2 at EL3, context will
remain secure only.
Change-Id: I79d95bc55a9afd27f295249936d7bc332c777f5e
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add the stm32mp1 CoT description file. Include the TRUSTED_BOARD_BOOT
entry in the platform device tree file.
Add the missing public root key reference for stm32mp15 and the
encryption key reference for stm32mp13.
Change-Id: I0ae2454979a3df6dd3e4361510317742e8fbc109
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
The arm,vexpress,config-bus DT binding restricts the possible (sub)node
names.
Adjust the current node names, to drop the unneeded address specifier,
and make the node names binding compliant.
Change-Id: Ic48c6969268c960ce92c8ec3a756ed1d89e61b08
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
When firmware implements idle states via PSCI, the value of the DT
entry-method property must be "psci", not "arm,psci".
Fix this to make the CPU description binding compliant.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Icd1bf704d177368af9b7aab545f47e580791b8cc
The arm,armv7-timer-mem DT binding documentation demands that the
#size-cells property should be <1> only.
Adjust the value to be <1> and drop the now needless leading 0 in the
frame's reg property. Convert to #address-cell = <1> on the way.
Also adjust the interrupts property to use the proper GIC macros.
Change-Id: Ia2224663b1e6aaa7cf94af777473641de6a840d2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The existing DT files for the base FVP model are having some issues,
that lead to warnings reported by the device tree compiler.
Those (and many other issues around (updated) DT binding compliance)
were fixed in the Linux kernel tree, so let's sync those files back into
TF-A.
We cannot copy the files "as is" for now, since we rely on certain custom
properties to be added (max-pwr-lvl in the PSCI node, SDEI nodes, etc).
Merge in the changed parts of the Linux kernel DT (from Linux v6.0-rc1),
and rework the base file to allow including the motherboard.dtsi
unchanged. This should make any future update less painful.
As this also affects the FVP VE boards (Cortex-A7 and Cortex-A5), since
they share the motherboard include file, fix them up as well.
Change-Id: I4f74d05e5583747f8849e32f246f74aeec7a9c60
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The GICv2 and GICv3 version of the FVP DT files are unnecessarily split,
as the common part of the peripherals is the same: it's literally just
the interrupt controller node that is different.
Since the GICv3 versions now use a generic DT include file (without any
GIC node), let's reuse that for the GICv2 versions of the FVP as well.
We just add a separate fvp-base-gicv2.dtsi file which describes the
GICv2 interrupt controller. Also shorten the compatible string, since
the GICv2 binding documentation does not allow the current combination.
This allows to remove the mostly redundant nodes from the GICv2 .dts
file.
Change-Id: I9018031bb611fb00ca7dbefc1bff7d40c3f05819
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The GICv2 and GICv3 version of the FVP DT files are unnecessarily split,
as the common part of the peripherals is the same: it's literally just
the interrupt controller node that is different.
To facilitate a unification, refactor the DT include files to explicitly
include a snippet with just the GICv3 description, and a generic base DT
file for the rest. This generic file can then be reused by the GICv2
versions later.
Since we can only have a /memreserve/ entry *before* any DT nodes, move
that line to each file, to allow including the GIC DT file separately.
Change-Id: I9ff357d3fe0ce46e280c30131aeae97a99631512
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
