The clock and power DT includes for rk3066a and rk3188 are now
available in the dts/upstream directory, so remove the ones that
are now redundant.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
power/rk3288-power.h in include/dt-bindings is identical to the version
in dts/upstream, remove the copy from include/dt-bindings to only use
the version from dts/upstream.
No functional change to board DTs is intended with this removal.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Enable OF_UPSTREAM to use upstream DT and add starfive/ prefix to
the DEFAULT_DEVICE_TREE. Rename jh7110-starfive-visionfive-2-u-boot.dtsi
to jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi and set the v1.3b
device tree as the default device tree.
Drop redundant DT files from arch/riscv/dts/ and redundant clock and
reset definitions from include/dt-bindings/.
Since the old clock definitions is a little different from those in
upstream Linux, update the clock definitions in clock drivers
accordingly.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Some dt-binding headers mask the upstream ones which can lead to build
failures, or worse: super weird bugs, if they get out of sync.
Remove these headers so our devicetree and binding headers will both be
in sync with upstream.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The upstream version has new defines use to build DT, drop
it in favor of the dts/upstream more recent one.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
- drop A1 dtsi and other bindings includes in favor of Upstream ones
-----BEGIN PGP SIGNATURE-----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=1dBl
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-next-20241113' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- khadas-vim3{l}: fix userdata size for android config
- drop A1 dtsi and other bindings includes in favor of Upstream ones
We are now using the dts/upstream subtree for the RZ/G2L SoC family so
we can drop unused dt-bindings headers.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Renesas R-Car systems use mainline Linux DTs for U-Boot via OF_UPSTREAM,
which also includes headers from dts/upstream/include/dt-bindings/power .
Remove unused legacy DT header files from include/dt-bindings/power .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Renesas R-Car systems use mainline Linux DTs for U-Boot via OF_UPSTREAM,
which also includes headers from dts/upstream/include/dt-bindings/clock .
Remove unused legacy DT header files from include/dt-bindings/clock .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
With the recent "old-style sunxi" sync and the penultimate OF_UPSTREAM DT
update, both directories were based on the same v6.10 kernel tree.
And while there is one subtle difference in many Allwinner SoC's DT
files, the H616 ones turn out to be identical.
Remove the old copies of the H616 related .dts and .dtsi files, and
switch the whole H616 SoC over to use OF_UPSTREAM. This immediately
benefits from the recent upstream DT update, to kernel v6.11.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The sandbox pinmux driver is used in the non-test devicetree as well as
the test one. I didn't realize this when I modified the driver for
tests, and so broke the regular use case (which only resulted in
warnings). First, making the pinmux and the UART group available
pre-relocation to avoid ENODEV errors. Then, convert the pin groups and
functions to the new style, adding onewire group as well.
Fixes: 7f0f1806e3 ("test: pinmux: Add test for pin muxing")
Closes: https://source.denx.de/u-boot/u-boot/-/issues/2
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
Add missing A1/2SYS clock ID just as a reference for OF_UPSTREAM
support. These clocks are not defined and are not usable as current
clock topckgen OPs doesn't support gates.
These special node won't ever be used by uboot hence just add them for
reference.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Add missing PERIBUS_SEL clock to match upstream linux clk ID order. Also
convert pericfg to mux + gate implementation as now we have also mux on
top of gates.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add missing clock PERI_UART4_PD for peri clock gates. This is needed to
match upstream linux clk ID in preparation for OF_UPSTREAM.
Also convert infracfg to mux + gate implementation as now we have mux on
top of gates.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add missing infra clock MUX1_SEL needed for CPU clock. This is needed to
match the upstream clk ID order in preparation for OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add missing clock for MAIN_CORE_EN. This is a special clock as it's a
gate for the APMIXED clocks required as a parent for CPU clocks.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move INFRA_TRNG clock to the bottom of the clk ID to match upstream
linux order. This is in preparation of OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rename AUDIO_AWB3 to AUDIO_AWB2 to match upstream linux naming in
preparation for OF_UPSTREAM support.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
Rename each entry from CK to CLK to match the include in upstream kernel
linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Replace infracfg clk ID with upstream linux version.
The same format is used here with the factor first, then mux and then
gates.
To correctly reference the gates in clk_gate function, define the
gates_offs value in clk_tree now that they are at an offset from mux and
factor.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Comment out CK_TOP_A_TUNER as not used and not defined in upstream
kernel linux. This is to permit support of OF_UPSTREAM and have a 1:1
match with upstream linux clock ID.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious topckgen 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the apmixed clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for apmixed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reorder TOPCKGEN factor ID to put TOP_FACTOR first and then PLL. This is
to match how it's done in upstream kernel linux and in preparation for
OF_UPSTREAM support.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rename TOPCKGEN factor clock to upstream neaming.
Upstream kernel linux reference the factor clock for apmixedpll with the
"pll" suffix. Align the naming to the upstream naming format in
preparation for OF_UPSTREAM support.
Also rename rtc clock to drop the CB_ as upstream doesn't have that.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add missing entry for IPCIE_PIPE_CK infra gate clock. Renumber the clock
order to match the expected offset in the gate array.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for infracfg and topckgen.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Upstream kernel linux clock include use SYSAXI_D2 instead of 66M_MCK.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
Rename each entry from CK to CLK to match the include in upstream kernel
linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Replace infracfg clk ID with upstream linux version.
The same format is used here with the factor first, then mux and then
gates.
To correctly reference the gates in clk_gate function, define the
gates_offs value in clk_tree now that they are at an offset from mux and
factor.
Drop any comment that reference the clock ID as we now have a 1:1 match
with upstream kernel linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Comment out infracfg clk not defined in upstream kernel linux clock ID
include. These clock are not used and can be safely commented. Keep them
just to have a reference of their existence.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious topckgen 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7988.
Drop the factor entry from mt7988-clk.h and reference to them in
mt7988.dtsi. Muxes and gates are updated to reference the apmixed clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for apmixed and topckgen.
Also move TOP_XTAL to the fixed clock table following how it's done in
upstream linux kernel.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reorder TOPCKGEN factor ID to put TOP_FACTOR first and then PLL. This is
to match how it's done in upstream kernel linux and in preparation for
OF_UPSTREAM support.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rename TOPCKGEN factor clock to upstream neaming.
Upstream kernel linux reference the factor clock for apmixedpll with the
"pll" suffix. Align the naming to the upstream naming format in
preparation for OF_UPSTREAM support.
Also rename rtc clock to drop the CB_ as upstream doesn't have that.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7988.
Drop the factor entry from mt7988-clk.h and reference to them in
mt7988.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move INFRA_PCIE_PERI_26M_CK_Px clock at top of the infracfg gates
in preparation for support of OF_UPSTREAM to have a 1:1 match with
upstream clock ID.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Upstream kernel linux clock include use TOP_NPU_SEL instead of
TOP_CK_NPU_SEL_CM_TOPS_SEL.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Upstream kernel linux clock include use TOP_DA_SEL instead of
TOP_DA_SELM_XTAL_SEL.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
