The plat_helpers.h is identical across various platforms, moved to the
common folder for easier maintenance.
Change-Id: Ic9f10c697fcda7e3cfbf32e67486c9cd28481b8a
Signed-off-by: Gavin Liu <gavin.liu@mediatek.com>
In order to register DEV_IRQ as secure interrupt in OP-TEE, the the GICD
EnableGrp1S should be enabled for DEV_IRQ. Add mtk_interrupt_props in
MTK GIC driver to configure the interrupt properly.
Signed-off-by: Gavin Liu <gavin.liu@mediatek.com>
Change-Id: Id909a42b535088c6d0dcaf803d3f2faf312ae846
Apusys rcx is a subsys in apusys, and it is a basic domain of APU and
it connects several components in APU.
The devapc control of apusys rcx is also inside APU and it can only be
set when APU is powered on.
Then apusys kernel driver will trigger rcx devapc init by ATF smc call.
Change-Id: If4249f22a08690b1e4f5aa5f0cbfb54ccacf90e1
Signed-off-by: Karl Li <karl.li@mediatek.com>
Signed-off-by: Chungying Lu <chungying.lu@mediatek.com>
Add APU bootup control smc call.
The steps of bootup flow:
1. set up APU config.
2. reset APU.
3. set up APU boot config.
4. boot APU.
Change-Id: I9e930070a64c7c4dcaa3a8b3d28b897823e9f53c
Signed-off-by: Chungying Lu <chungying.lu@mediatek.com>
Signed-off-by: Karl Li <karl.li@mediatek.com>
Enable apusys mailbox mpu protect.
Change-Id: Idbf67084037b7ecf4926f57a901075f98540ee57
Signed-off-by: Karl Li <karl.li@mediatek.com>
Signed-off-by: Chungying Lu <chungying.lu@mediatek.com>
Enable apusys domain remap to protect no-protect memory.
- Remap request which from domain 5 to domain 14.
- Remap request which from domain 7 to domain 14.
Change-Id: Iccd188e3b8edbe916fa9767c841a844b66c6011f
Signed-off-by: Karl Li <karl.li@mediatek.com>
Signed-off-by: Chungying Lu <chungying.lu@mediatek.com>
Apusys ao devapc is a set of control registers inside APU, and it
controls the access permission of APU ao domain.
Moreover, apusys ao devapc must be set after apusys power init, so
we need to place the drivers in TF-A instead of coreboot.
Change-Id: Ife849c32d4dd9dca15432d4b8a51753fde61b148
Signed-off-by: Karl Li <karl.li@mediatek.com>
Signed-off-by: Chungying Lu <chungying.lu@mediatek.com>
The patch brings preparation steps before powering on APU
(AI processing unit)
Change-Id: Ica01e035153ec6f3af0de6ba2c66b17a064f8c89
Signed-off-by: Chungying Lu <chungying.lu@mediatek.com>
In order to wake up system from USB devices, keep infra and peri on
when system suspend.
Change-Id: I0a0eb2e72709b0cc1bf11b36241a50cb5d85d9b8
Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com>
SPM needs to access some modules' registers to decide its sleep
behavior. This patch add these register definitions to platform_def.h.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Change-Id: I3bebe74e367d5f6a7b59563036e18a83a3ef31e9
CPU PM driver accesses CPU idle SRAM during the system suspend
process. The region of CPU idle SRAM needs to be added as mmap entry.
Otherwise, the execption would occur.
BUG=b:244215539
TEST=Test of suspend resume passes.
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Change-Id: I5838964fd9cb1b833e4006e2123febb4a4601003
For MT8188, MTK_AUDIO_SMC_OP_DOMAIN_SIDEBANDS is required for normal
mode switch.
- Add audio common code and chip specific code.
- Add new id (MTK_SIP_AUDIO_CONTROL) to mtk_sip_def.h.
- Enable for MT8188.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Change-Id: Iff4680cd0b520b2b519ecf30ecafe100f147cc62
Add PTP3 driver to protect CPU from excessive voltage drop in CPU
heavy loading.
Signed-off-by: Riven Chen <riven.chen@mediatek.corp-partner.google.com>
Change-Id: I394096be43e1d1d615f99b22f38f0b3ae0bb40c1
Enable MTK_PUBEVENT_ENABLE for subscribing CPUPM events. This
patch also corrects the header file naming.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iabd89a4ead21ccafa833390367484bfea5d351f6
In order to sync drivers with MediaTek internal code base, we move lpm
drivers back to common folder.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I1066e092febe0abb9782a46f668613e137737c88
- Add cpu_pm driver for CPU idle and SMP flow.
- Add SMP driver for CPU power on/off control.
- Add CPC driver to handle CPU powered on/off in CPU suspend.
- Add mbox driver for tinysys support.
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Change-Id: I20141474e1c43cdfacb9f2c6a2285721e50a617c
It is more suitable to place platform_def.h in mt8188/include.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I35720690ff4f2ca99c9430edb8bbe17edf9aefb9
Add MCUSYS drivers support for MT8188.
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Change-Id: I84107702a9fd021c37d2997ad25b321a483a1a66
DFD (Design for Debug) is a debugging tool, which scans flip-flops and
dumps to internal RAM on the WDT reset. After system reboots, those
values could be showed for debugging.
TEST=build pass.
BUG=b:244216434
Signed-off-by: Fengquan Chen <fengquan.chen@mediatek.corp-partner.google.com>
Change-Id: I468036131e941a46bc1ec12d33105146000730d8
DCM means dynamic clock management, and it can dynamically
slow down or gate clocks during CPU or bus idle.
1. Add MCUSYS related DCM drivers.
2. Enable MCUSYS related DCM by default.
Signed-off-by: Garmin Chang <garmin.chang@mediatek.com>
Change-Id: I131354d72bbc190af504e9639bcc85a720e2bb17
TEST=build pass.
BUG=b:233720142
Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com>
Change-Id: I348eff0f53341593f74a63780e2e8298cbc3ec88
Add PWRAP and PMIC driver to support power-off.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: Id9951134925f6cb5f8d304a7b8e7901837809bd9
Add SiP service for multimedia & infra master to enable/disable
MM & INFRA IOMMU in secure world
TEST=build pass
BUG=b:236339614
Signed-off-by: Chengci Xu <chengci.xu@mediatek.corp-partner.google.com>
Change-Id: I4eb1fda6044cf2cb6c22c005cb2fa550906b71e9
MTK display port mute/unmute control registers need to be
set in secure world.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I0aa0675f07c80aab4349493bfbb0782bf0bbef58
To use cirq drivers more easier, we place mtk_cirq.c and mtk_cirq.h
to common/drivers/cirq.
We also rename mtk_cirq.c/h to mt_cirq.c/h for consistency with other
driver folders.
TEST=build pass for mt8192/mt8195/mt8186
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I71bc442f00b16fb4031260937982c0496fcaaea0
