Enable the Arm SPE DT binding for TC4.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
Change-Id: I9ea49046a663eecc2b97ecef9ca939575d71fdd9
These specify the addresses of the MPAM registers in the MCN block. Note
that these are enabled for TC4 FPGA only as the MPAM devices are not
available on FVP.
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
Change-Id: I105cd21952c2bd4fac5a06c84c0a93217b5e1312
CPU PMU types are not same for all CPUs on TC platforms, so define the
PMU node per microarchitecture.
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
Change-Id: Ibbe8dacda695ccb45965c7f4680d4b03cffdb815
Modify ethernet base addr and irq numbers for TC4 FPGA in dts to match
with its RoS configuration.
Change-Id: I7b180c3eb90d7557d0011a25a742106f703cd264
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
Modify gpio controller base addr for TC4 FPGA in dts to match
with its RoS configuration.
Change-Id: Id4ad925d23937d302adfb3e0d4b1573e5ec717c1
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
TC4 FPGA DPU base addr and irq doesn't match with TC3 FPGA
so refactor the code to manage it accordingly.
Change-Id: Ie31933e0bcbd489945935829940a5c5434e6b1d7
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
Modify mmc base addr and irq numbers for TC4 FPGA in dts to match
with its RoS configuration.
Change-Id: Ie8fe1f1d3aef1c020ac85db7c3b81dfad3722e2f
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
As per GPU team, this change should be helpful to improve
the performance.
Change-Id: I10a3fc1d0ddf1ba0a17da6dc4f2a80f5fe567db6
Signed-off-by: Vishnu Satheesh <vishnu.satheesh@arm.com>
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
Currently used stream id 0x200 gives below fault,
[ 9.547393][ C0] mali 2d000000.gpu: Unexpected Page fault in firmware address space at VA 0x0000000000000000
[ 9.547393][ C0] raw fault status: 0x400D02C0
[ 9.547393][ C0] exception type 0xC0: TRANSLATION_FAULT at level 0
[ 9.547393][ C0] access type 0x2: READ
As per the GPU team, GPU stream id is 0 on TC4-FPGA so change it.
Change-Id: I3aed62289c5b96fb850f0022ea7f5172c606eb95
Signed-off-by: Vishnu Satheesh <vishnu.satheesh@arm.com>
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen.Zeyada <Icen.Zeyada2@arm.com>
Add MCN PMU nodes in dts for TC4 to use MCN PMU driver in
kernel with perf.
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen Zeyada <Icen.Zeyada2@arm.com>
Change-Id: I1a85ba646604336ce3f16c28171589af78f65251
These dts nodes are used by u-boot MHU/RSE driver to faciliate
communication with RSE over MHU.
FPGA doesn't seem to have the MHU instances which are used to
communicate with RSE so keep rse mhu disabled for fpga.
Signed-off-by: Yu Shihai <yu.shihai@arm.com>
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen Zeyada <Icen.Zeyada2@arm.com>
Change-Id: Ib10b3da09626e5beb6d6cd87b1618a143234a5d0
Add DSU PMU node for TC4. DSU PMU interrupt is not connected on TC3
but it is connected on IRQ 290 on TC4, so add interrupt property
specifically for TC4.
Signed-off-by: Jagdish Gediya <jagdish.gediya@arm.com>
Signed-off-by: Icen Zeyada <Icen.Zeyada2@arm.com>
Change-Id: Ib1b810df65004987e9f3cf1bbd5deb5d211f3a17
TC4 adds a new SMMU-700 specifically for the DPU (in the RoS). This is
used as the DPU SMMU instead of the existing SMMU used for both the GPU
and DPU. Update the devicetree to reflect this.
Note that the streamID values have also changes for this new SMMU. This
is because TC4 also updates the new SMMU to use a different streamID for
each DPU port - these must all be added to the device tree.
Change-Id: If2ce9749e40937fd1291346d071b691cfb662f2e
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
A SMMU-700 is used on TC4 for only GPU, on both FVP and FPGA. Add DT
binding for it.
Change-Id: I1b840676fd02c3961d4efdd769f12a4b01d459fb
Signed-off-by: Leo Yan <leo.yan@arm.com>
This patch incorporates the changes for Drage GPU to uses new access
window interface "IRQ_AW". As the interrupt properties are different
between TC4 and other TC platforms, this patch appends the interrupt
properties in platform specific DT binding file.
Change-Id: I2ca505846f03ce64b8e5f02fd202962dbfe39f25
Signed-off-by: Leo Yan <leo.yan@arm.com>
The TC4 uses a new RoS (Virtual Peripherals) and places them at
different address to that in TC3. Add these addresses to the DTS.
Change-Id: Ia62a670e47cdc98b3c113a670a21edc65905cafe
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Since TC3 and TC4 share most components in the hardware design, they can
reuse the device tree binding. For this reason, this patch extracts the
common modules from tc3.dts and put into the file tc3-4-based.dtsi.
As a result, a new created tc4.dts file includes tc3-4-based.dtsi for
support DT binding for the TC4 platform.
Change-Id: Ib7497162cb131d94a722aeaa14a1a37fb0095829
Signed-off-by: Leo Yan <leo.yan@arm.com>
