When StandaloneMm used with SPM_MM, TF-A should create
PHIT Hob to boot it.
This patch supports Hob creation for StandaloneMm in synquacer platform.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Change-Id: Ifa3ae1f0aa37f389aabb14f48be307502ae6fc2c
In order for directories to be automatically created when used as a
dependency, they must end with a forward slash (`/`). This is because we
have a pattern rule (`%/`) to create a directory anywhere where a
directory is required as a direct dependency.
Change-Id: Ib632d59da0745f6cadb0a839a62360aeca25c178
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.
The `silent` and `verbose` variables are boolean values determining
whether the build system has been configured to run silently or
verbosely respectively (i.e. with `--silent` or `V=1`).
These two modes cannot be used together - if `silent` is truthy then
`verbose` is always falsy. As such:
make --silent V=1
... results in a silent build.
In addition to these boolean variables, we also introduce two new
variables - `s` and `q` - for use in rule recipes to conditionally
suppress the output of commands.
When building silently, `s` expands to a value which disables the
command that follows, and `q` expands to a value which supppresses
echoing of the command:
$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed but not echoed'
When building verbosely, `s` expands to a value which disables the
command that follows, and `q` expands to nothing:
$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed and echoed'
In all other cases, both `s` and `q` expand to a value which suppresses
echoing of the command that follows:
$(s)echo 'This command is executed but not echoed'
$(q)echo 'This command is executed but not echoed'
The `s` variable is predominantly useful for `echo` commands, where you
always want to suppress echoing of the command itself, whilst `q` is
more useful for all other commands.
Change-Id: I8d8ff6ed714d3cb401946c52955887ed7dca602b
Signed-off-by: Chris Kay <chris.kay@arm.com>
Refactor console_flush() and console_switch_state(CONSOLE_FLAG_RUNTIME)
to bl31_main(). This has been done per the recommendation in TF-A
mailing list. These calls need to be the last calls, after any runtime
initialization has been done, before BL31 exits.
All platforms that override the generic implementation of
bl31_plat_runtime_setup() have been refactored. The console_flush()
and console_switch_state() calls have been removed as they become
part of bl31_main() function.
Any platform that don't need to make any change to the generic (weak)
implementation of bl31_plat_runtime_setup() don't need to override it
in their platforms.
Change-Id: I6d04d6daa9353daeaa7e3df9e9adf6f322a917b8
Signed-off-by: Salman Nabi <salman.nabi@arm.com>
TF-A plans to move the console_flush() and
console_switch_state(CONOSLE_FLAG_RUNTIME) calls to bl31_main() just
before BL31 exits.
For now we are mimicking the generic implementation by calling flush
and changing the console state to runtime at the end of
bl31_plat_runtime_setup() for each platform. This is so that each
platform can test it prior to moving flush and switch to bl31_main().
This patch affects the synquacer SoC of the socionext platform.
Change-Id: I85a251e3d9732c5fb5010c3c8bb7323c4f57fa96
Signed-off-by: Salman Nabi <salman.nabi@arm.com>
BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).
BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.
Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Some of our specialized sections are not prefixed with the conventional
period. The compiler uses input section names to derive certain other
section names (e.g. `.rela.text`, `.relacpu_ops`), and these can be
difficult to select in linker scripts when there is a lack of a
delimiter.
This change introduces the period prefix to all specialized section
names.
BREAKING-CHANGE: All input and output linker section names have been
prefixed with the period character, e.g. `cpu_ops` -> `.cpu_ops`.
Change-Id: I51c13c5266d5975fbd944ef4961328e72f82fc1c
Signed-off-by: Chris Kay <chris.kay@arm.com>
Increase the max possible size of BL33 from 1MB to 2MB.
For example, edk2 is usually bigger than 1MB
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Change-Id: Idd4762e25e623de145c65f31cf2dfe1fee466a74
Currently Tf-A uses whatever openssl binary is on the system to sign
images. However if OPENSSL_DIR is specified in the build flags this can
lead to linking issues as the system binary can end up being linked
against shared libraries provided in OPENSSL_DIR/lib if both binaries
(the system's and the on in OPENSSL_DIR/bin) are the same version.
This patch ensures that the binary used is always the one given by
OPENSSL_DIR to avoid those link issues.
Signed-off-by: Salome Thirot <salome.thirot@arm.com>
Change-Id: Ib534e06ebc8482e4391e376d3791a87968de4a99
Add FWU Multi Bank Update support. This reads the platform metadata
and update the FIP base address so that BL2 can load correct BL3X
based on the boot index.
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Masahisa Kojima <masahisa.kojima@linaro.org>
Cc: Manish V Badarkhe <manish.badarkhe@arm.com>
Cc: Leonardo Sandoval <leonardo.sandoval@linaro.org>
Change-Id: I5d96972bc4b3b9a12a8157117e53a05da5ce89f6
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Prepare for introduction of BL2 support by moving
reusable files from BL31_SOURCES into PLAT_BL_COMMON_SOURCES
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Masahisa Kojima <masahisa.kojima@linaro.org>
Cc: Manish V Badarkhe <manish.badarkhe@arm.com>
Cc: Leonardo Sandoval <leonardo.sandoval@linaro.org>
Change-Id: I21137cdd40d027cfa77f1dec3598ee85d4873581
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
SynQuacer SoC contains a Cortex-M3 System Control Processor(SCP)
which manages system power.
This commit modifies the PSCI system_off handling to call SCMI,
same as other PSCI calls. System power-off is done by turing off
the ATX power supply through GPIO, this operation is transferred
to SCP.
Note that this commit modifies only the SCMI case, obsolete SCPI
implementation is not updated.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I6c1009e67cccd1eb5d14c338c3df9103d63709dd
The GTimer implemented on SynQuacer has similar issue found on Juno
wherein CNTBaseN.CNTFRQ can be written but does not reflect the value
of the CNTFRQ register in CNTCTLBase frame. This doesn't follow ARM ARM
in that the value updated in CNTCTLBase.CNTFRQ is not reflected
in CNTBaseN.CNTFRQ.
Hence enable the workaround (applied to Juno) for SynQuacer that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I5204fb57f28c0945812814f008c4905ef0882e2b
In the SCMI power domain off handling, configure GIC
to prevent interrupt toward to the core to be turned off,
and configure CCN to disable coherency when the cluster is turned off.
The same operation is done in SCPI power domain off processing.
This commit adds the missing operation in SCMI power domain
off handling.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: Ib3523de488500c2e8bdc74e4cb8772a1442d9781
And from crash_console_flush.
We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.
Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Core spm_mm code expects the translation tables are located in the
inner & outer WBWA & shareable memory.
REGISTER_XLAT_CONTEXT2 macro is used to specify the translation
table section in spm_mm.
In the commit 363830df1c (xlat_tables_v2: merge
REGISTER_XLAT_CONTEXT_{FULL_SPEC,RO_BASE_TABLE}), REGISTER_XLAT_CONTEXT2
macro explicitly specifies the base xlat table goes into .bss by default.
This change affects the existing SynQuacer spm_mm implementation.
plat/socionext/synquacer/include/plat.ld.S linker script intends to
locate ".bss.sp_base_xlat_table" into "sp_xlat_table" section,
but this implementation is no longer available.
This patch adds the base table section name parameter for
REGISTER_XLAT_CONTEXT2 so that platform can specify the
inner & outer WBWA & shareable memory for spm_mm base xlat table.
If PLAT_SP_IMAGE_BASE_XLAT_SECTION_NAME is not defined, base xlat table
goes into .bss by default, the result is same as before.
Change-Id: Ie0e1a235e5bd4288dc376f582d6c44c5df6d31b2
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.
NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.
Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch provides separation of GICD, GICR accessor
functions and adds new macros for GICv3 registers access
as a preparation for GICv3.1 and GICv4 support.
NOTE: Platforms need to modify to include both
'gicdv3_helpers.c' and 'gicrv3_helpers.c' instead of the
single helper file previously.
Change-Id: I1641bd6d217d6eb7d1228be3c4177b2d556da60a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I7a23327394d142af4b293ea7ccd90b843c54587c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In order to allow the MHUv2 driver to be usable with multiple MHUv2
controllers, use the base address of the controller from the platform
information instead of the MHUV2_BASE_ADDR macro.
Change-Id: I4dbab87b929fb0568935e6c8b339ce67937f8cd1
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
The Secure Configuration Register is 64-bits in AArch64 and 32-bits in
AArch32. Use u_register_t instead of unsigned int to reflect this.
Change-Id: I51b69467baba36bf0cfaec2595dc8837b1566934
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Before adding any new SPM-related components we should first do
some cleanup around the existing SPM-MM implementation. The aim
is to make sure that any SPM-MM components have names that clearly
indicate that they are MM-related. Otherwise, when adding new SPM
code, it could quickly become confusing as it would be unclear to
which component the code belongs.
The secure_partition.h header is a clear example of this, as the
name is generic so it could easily apply to any SPM-related code,
when it is in fact SPM-MM specific.
This patch renames the file and the two structures defined within
it, and then modifies any references in files that use the header.
Change-Id: I44bd95fab774c358178b3e81262a16da500fda26
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the other is based on the Secure Partition Client Interface
(SPCI) specification. Currently there is a dependency between their
build flags that shouldn't exist, making further development
harder than it should be. This patch removes that
dependency, making the two flags function independently.
Before: ENABLE_SPM=1 is required for using either implementation.
By default, the SPCI-based implementation is enabled and
this is overridden if SPM_MM=1.
After: ENABLE_SPM=1 enables the SPCI-based implementation.
SPM_MM=1 enables the MM-based implementation.
The two build flags are mutually exclusive.
Note that the name of the ENABLE_SPM flag remains a bit
ambiguous - this will be improved in a subsequent patch. For this
patch the intention was to leave the name as-is so that it is
easier to track the changes that were made.
Change-Id: I8e64ee545d811c7000f27e8dc8ebb977d670608a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
MHU doorbell driver requires arm platform specific
macro "PLAT_CSS_MHU_BASE".
Rename it to "PLAT_MHUV2_BASE", so that platforms other than arm
can use generic MHU doorbell driver.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific protocol(0x80).
This vendor specific protocol is used to get the dram mapping information
from SCP.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
The SPM implementation based on MM is going to be kept for the
foreseeable future.
Change-Id: I11e96778a4f52a1aa803e7e048d9a7cb24a53954
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Enable the deprecated SPM framework for the SynQuacer platform.
It involves creating a memory layout in secure DRAM, and wiring
up the SPM infrastructure so that the secure partition payload
that is loaded into this region by the SCP firmware is dispatched
appropriately.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The logic that initializes the BL32 entry point data structure
should only be executed if we are in fact loading OP-TEE, and
not if BL32_BASE is set for other reasons (i.e., when enabling
SPM)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a2 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.
Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
OP-TEE loading is optional on Developerbox controlled via SCP
firmware. To check if OP-TEE is loaded or not, we use DRAM1 region
info passed by SCP firmware.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Add Makefile and plaform definations file.
My thanks to Daniel Thompson and Ard Biesheuvel for the bits and pieces
I've taken from their earlier work regarding build and deploy steps for
Developerbox based on Synquacer SoCs. They deserve much of the credit
for this work although, since I assembled and tested things, any blame
is probably mine.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PSCI framework uses SCPI driver to communicate to SCP firmware for
various power management operations. Following PSCI operations are
supported:
- CPU ON
- CPU OFF
- CPU STANDBY
- SYSTEM RESET
- SYSTEM OFF
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Retrieve DRAM info from SCP firmware using SCPI driver. Board supports
multiple DRAM slots so its required to fetch DRAM info from SCP firmware
and pass this info to UEFI via non-secure SRAM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Add System Control and Power Interface (SCPI) driver which provides APIs
for PSCI framework to work. SCPI driver uses MHU driver APIs to communicate
with SCP firmware for various system control and power operations.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Add Message Handling Unit (MHU) driver used to communicate among
Application Processors (AP) and System Control Processor (SCP).
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
BL31 runs from SRAM which is a non-coherent memory on synquacer. So
enable MMU with SRAM memory marked as Non-Cacheable and mark page tables
kept on SRAM as Non-Cacheable via XLAT_TABLE_NC flag. Also add page tables
for Device address space.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
