For ST STM32MP15 boards, where the default BL32 is OP-TEE, we add new
versions of DT files with -sp_min.dts extension to manage this
configuration. These files can be compiled directly, or, with the
previous patch, the same command line can be used and those sp_min
files will be automatically used, if AARCH32_SP=sp_min option is used.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I5aabe415b0302da48f02918a3dbd24f334eb8e7d
On STM32MP15 ST boards, RTC clock configuration by OPTEE is not ready
yet. Re-enable it temporary to get LSE as clock source of RTC.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Change-Id: Ib6071229552e456faffb4fdfc8db9808140d54a7
RTC clock configuration is done now in OPTEE.
Note: The RTC clock source can only be configured once.
TF-A, configuring the RTC clock source will have no effect in OPTEE.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Change-Id: I111ba96b27d0de0c45086ba8ef947dd2e6785672
TF-A BL2 always boot at 650MHz using an algorithm to calculate PLL1
settings, without reading DT. Remove the corresponding nodes.
Change-Id: I0003337d8d37df7b2a70a84b5475f4278c4c4669
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
LSI was too slow to provide enough random numbers (limited
to 6ms for 16 bytes production). Switch to CSI that allow
to get the RNG fifo ready in less than 50µs.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: I76d1fe58e2f4d5416a96f48123ae36bd82d8a8ee
This is something commonly asked by Linux kernel DT maintainers [1].
The mentioned doc is not upstreamed, but may be checked with dtbs_check.
While at it align some nodes with Linux or OP-TEE.
[1] https://lore.kernel.org/linux-arm-kernel/20231125184422.12315-1-krzysztof.kozlowski@linaro.org/
Change-Id: I63e983c2a00eda3cd8b81c66c0cd1a97cf8249b7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is an alignment with Linux DT files that have been merged in
stm32 tree [1], and will be in Linux 6.7.
The /omit-if-no-ref/ in overlay files are now removed, as already in
pinctrl files.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iab94b0ba7a4a0288ca53d1ae57ab590566967415
The node is currently not used in TF-A. Remove it.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iedc4745f155ebb9c80132311a8623e4498f0689f
For peripheral where both status and secure-status are set to okay,
the function fdt_get_status() returns the same status (DT_SHARED) if
secure-status property is omitted. This secure-status property can then
be removed in boards DT files for iwdg nodes.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I9f9360842d4d41288db0cf1b92063f347c72d137
The RCC security is managed with a dedicated compatible:
"st,stm32mp1-rcc-secure" [1].
Remove useless secure-status property in boards rcc nodes.
[1] 812daf916c ("feat(st): update the security based on new compatible")
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iff31044ade78dd9c432120dce65375fe2b0d36d6
Remove the nvmem_layout node with compatible "st,stm32-nvmem-layout"
no more used in TF-A code to simplify the device tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I3748b20b7d3c60ee64ead15541fac1fd12656600
A new nvmem_layout node includes nvmem platform-dependent layout
information, such as OTP NVMEM cell lists (phandle, name).
This list allows easy access to OTP offsets defined in BSEC node,
where more OTP definitions with offsets in bytes and length have
been added (replace hard-coded values).
Each board may redefine this list, especially for board_id info.
Change-Id: I910ae671b3bf3320ee6500fecc9ec335ae67bbda
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Update regulator description to match with pmic driver updates.
vref_ddr does not support over-current protection.
vtt_ddr is set to sink source mode.
Change-Id: I725f35b091ca8c230994c2b5f81693ebc97bf4aa
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add 2021 year in the file header Copyright line.
Change-Id: I09f7bef1f746c429ff308286169354e58648a1cd
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Set Ethernet source clock on PLL4P. This is required to enable PTP.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ia64fbb681d3f04f2b90f373c5eb044f5daa2836c
There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A
The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.
There are 4 packages available, for which the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.
STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.
Some reordering is done in other files, and realign with kernel DT files.
The DDR files are generated with our internal tool, no changes in the
registers values.
Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: Yann Gautier <yann.gautier@st.com>
