For ST STM32MP15 boards, where the default BL32 is OP-TEE, we add new
versions of DT files with -sp_min.dts extension to manage this
configuration. These files can be compiled directly, or, with the
previous patch, the same command line can be used and those sp_min
files will be automatically used, if AARCH32_SP=sp_min option is used.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I5aabe415b0302da48f02918a3dbd24f334eb8e7d
On STM32MP15 ST boards, RTC clock configuration by OPTEE is not ready
yet. Re-enable it temporary to get LSE as clock source of RTC.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Change-Id: Ib6071229552e456faffb4fdfc8db9808140d54a7
RTC clock configuration is done now in OPTEE.
Note: The RTC clock source can only be configured once.
TF-A, configuring the RTC clock source will have no effect in OPTEE.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Change-Id: I111ba96b27d0de0c45086ba8ef947dd2e6785672
TF-A BL2 always boot at 650MHz using an algorithm to calculate PLL1
settings, without reading DT. Remove the corresponding nodes.
Change-Id: I0003337d8d37df7b2a70a84b5475f4278c4c4669
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
LSI was too slow to provide enough random numbers (limited
to 6ms for 16 bytes production). Switch to CSI that allow
to get the RNG fifo ready in less than 50µs.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: I76d1fe58e2f4d5416a96f48123ae36bd82d8a8ee
This is something commonly asked by Linux kernel DT maintainers [1].
The mentioned doc is not upstreamed, but may be checked with dtbs_check.
While at it align some nodes with Linux or OP-TEE.
[1] https://lore.kernel.org/linux-arm-kernel/20231125184422.12315-1-krzysztof.kozlowski@linaro.org/
Change-Id: I63e983c2a00eda3cd8b81c66c0cd1a97cf8249b7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is an alignment with Linux DT files that have been merged in
stm32 tree [1], and will be in Linux 6.7.
The /omit-if-no-ref/ in overlay files are now removed, as already in
pinctrl files.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iab94b0ba7a4a0288ca53d1ae57ab590566967415
The onkey and watchdog features of the PMIC are not used in TF-A for
STM32MP15 boards. Remove the nodes from DT.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2933e0bdc5843fcb549a817742106d9c66097869
Remove extra spaces before the closing brace of vbus_otg node in
stm32mp157c-ed1 DT file, before the vbus_sw label, and before the
closing brace of vbus_sw node.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2e77e0a043594876551ed8d77ed3d13f6a098c81
The RCC security is managed with a dedicated compatible:
"st,stm32mp1-rcc-secure" [1].
Remove useless secure-status property in boards rcc nodes.
[1] 812daf916c ("feat(st): update the security based on new compatible")
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iff31044ade78dd9c432120dce65375fe2b0d36d6
Remove the nvmem_layout node with compatible "st,stm32-nvmem-layout"
no more used in TF-A code to simplify the device tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I3748b20b7d3c60ee64ead15541fac1fd12656600
Set non-secure property on platform secure OTP nodes that non-secure
world is allowed to access through secure world services.
These are the SoC MAC address and the ST boards board_id OTPs.
Most of these were already done but it was missing for ED1 board.
Change-Id: Idfa6322d9d5c35285706d0b2d32ae09af38684a7
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
A new nvmem_layout node includes nvmem platform-dependent layout
information, such as OTP NVMEM cell lists (phandle, name).
This list allows easy access to OTP offsets defined in BSEC node,
where more OTP definitions with offsets in bytes and length have
been added (replace hard-coded values).
Each board may redefine this list, especially for board_id info.
Change-Id: I910ae671b3bf3320ee6500fecc9ec335ae67bbda
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Update regulator description to match with pmic driver updates.
vref_ddr does not support over-current protection.
vtt_ddr is set to sink source mode.
Change-Id: I725f35b091ca8c230994c2b5f81693ebc97bf4aa
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add 2021 year in the file header Copyright line.
Change-Id: I09f7bef1f746c429ff308286169354e58648a1cd
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Align STM32MP157C-ED1/EV1 boards PLL nodes with what is done
for DK boards.
Change-Id: I91be408ea1d9b0474caf4965175df33792b7e11e
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Set Ethernet source clock on PLL4P. This is required to enable PTP.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ia64fbb681d3f04f2b90f373c5eb044f5daa2836c
Without this node, the board fails to boot and panics in the function
stm32mp_init_auth().
Change-Id: Ia54924410dac2a8c94dd6e45d7e93977fe7d87e2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A
The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.
There are 4 packages available, for which the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.
STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.
Some reordering is done in other files, and realign with kernel DT files.
The DDR files are generated with our internal tool, no changes in the
registers values.
Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: Yann Gautier <yann.gautier@st.com>
LTDC modifies the clock frequency to adapt it to the display. Such
frequency change is not detected by the FDCAN driver that instead
caches the value at probe and pretends to use it later.
This change fixes the issue by moving the FDCAN to PLL4_R,
leaving the LTDC alone on PLL4_Q.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I8230868b2b5fd6deb6e3f9dc3911030d8d484c58
Update DDR parameters to version 1.45.
Remove useless sdmmc1_dir_pins_b node.
Add USART3 and UART7 nodes.
Correct a PMIC value for USB regulator.
Add TIMER12, TIMER15, CRYP, HASH and USBOTG_HS nodes.
Update DTSI file for SDMMC compatible, but overwrite it with the former
name.
Move BSEC board_id node to boards DTS files, as this OTP is specific to
STMicroelectronics boards.
Change-Id: If4d2fe090c6a8368afe8e21e5ac70579911d3939
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The system configuration controller is mainly used to manage
the compensation cell and other IOs and system related settings.
The SYSCFG driver is in charge of configuring masters on the interconnect,
IO compensation, low voltage boards, or pull-ups for boot pins.
All other configurations should be handled in Linux drivers requiring it.
Device tree files are also updated to manage vdd-supply regulator.
Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This node is added in a new file stm32mp157c-security.dtsi.
This node includes OTPs that should be shadowed and made readable
to non secure world.
Explicitly add status and secure-status, as these OTPs are accessible
by secure and non-secure world.
The stgen node is also moved to this file.
Change-Id: I3c89a01588d2e411fecfc44997e1c5df2fc37cad
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP1 chip embeds a dual Cortex-A7 and a Cortex-M4.
The support for Cortex-M4 clocks is added when configuring the clock tree.
Some minimal security features to allow communications between A7 and M4
are also added.
Change-Id: I60417e244a476f60a2758f4969700b2684056665
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Regulator configuration at boot takes more information from DT.
I2C configuration from DT is done in I2C driver.
I2C driver manages more transfer modes.
The min voltage of buck1 should also be increased to 1.2V,
else the platform does not boot.
Heavily modifies stm32_i2c.c since many functions move inside the source
file to remove redundant declarations.
Change-Id: I0bee5d776cf3ff15e687427cd6abc06ab237d025
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
The drivers are also updated to reflect the changes.
Set RCC as non-secure.
Change-Id: I568fa1f418355830ad1d4d1cdcdb910fb362231b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is the correct name of the IP.
Rename stm32mp1_pmic files to stm32mp_pmic.
Change-Id: I238a7d1f9a1d099daf7788dc9ebbd3146ba2f15f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Those device tree files are taken from STM32MP1 U-Boot and Linux.
And they are updated to fit TF-A needs.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
