Tom reports that generating the ESL file we need for authenticated
capsule updates fails to work on azure which expects a RO git tree.
Move it to $(objtree)
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
UART-A can be exposed through uSD, this was tested on Transformer T20
but should work on all Ventana-based boards.
TX is exported on SDD pingroup corresponding to uSD CLK pin
RX is exported on SDB which is CMD pin in uSD slot
Signed-off-by: Artur Kowalski <arturkow2000@gmail.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Tegra Note 7 is a mini tablet computer and the second Tegra 4
based mobile device designed by Nvidia that runs the Android operating
system. The Tegra Note has a 7" IPS display with 1280 x 800 (217 ppi)
resolution. The 1 GB of RAM and 16 GB of internal memory can be
supplemented with a microSDXC card giving up to 64 GB of additional
storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The ASUS Transformer Pad TF701T is an Android tablet computer made by
ASUS, successor to the ASUS Transformer Pad Infinity. The tablet includes
a Tegra 4 T114 processor clocked at 1.9 GHz, and an upgraded 2560×1600
pixel resolution screen, increasing the pixel density to 300 PPI and
a mobile dock. Transformers (t114) board derives from Nvidia Macallan
development board.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The clock initialization routine sets the DISP* clock parent to PLLC,
resulting in DC failure in the case when PLLD was previously configured.
This issue disrupts chainloading and to prevent failures caused by DISP*
clock parent conflicts, clock initialization should not modify DISP*. The
DC driver handles DISP* configuration.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Most device headers contain SoC specific part and common Tegra post part.
Add a generic header which can be used by any Tegra device of one of the
supported SoC generations (T20, T30, T114, T124 or T210) without need in
device specific configuration.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link CFG_SYS_NS16550_COM1 value to chosen CONFIG_TEGRA_ENABLE_UART Tegra
wide. Remove all CFG_SYS_NS16550_COM1 from device headers.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Applies same logic to general Tegra pincontrol driver as is done to Tegra20
by commit:
a35bf832d7 ("pinctrl: tegra20: detect unknown/invalid pin/func
configurations")
Suggested-by: Artur Kowalski <arturkow2000@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tegra20 driver doesn't know about some pin configurations and even about
some pins. In case when pin configuration is unknown the pin would be
muxed to whatever is under function 0, in case when pin itself is
unknown, it could cause out-of-bounds array access in pinmux_set_func
and pinmux_set_pullupdown.
Signed-off-by: Artur Kowalski <arturkow2000@gmail.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Motorola Atrix 4G (MB860) and Droid X2 (MB870) both featured a
dual-core NVIDIA Tegra 2 AP20H processor clocked at 1GHz, coupled with 1GB
of DDR2 RAM. Storage consisted of 16GB of internal flash memory, expandable
via microSD. The display was a 4.0-inch TFT LCD with a resolution of
960x540 pixels (qHD). The devices originally ran on Android up to 2.3
(Gingerbread).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The LM3532 is a 500-kHz fixed frequency asynchronous boost converter which
provides the power for 3 high-voltage, low-side current sinks. The device
is programmable over an I2C-compatible interface and has independent
current control for all three channels.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add support for the LCD panel module used in Motorola Atrix 4G or Droid X2.
Exact panel vendor and model are unknown. The panel has a 540x960 (qHD)
resolution and uses 24 bit RGB per pixel.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
CPCAP has a dedicated interrupt for power button. Implement this to have
more input control over the devices.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The CPCAP is a Motorola/ST-Ericsson creation, a multifunctional IC whose
main purpose was power control. It was used in a wide variety of Motorola
products, both Tegra and OMAP based. The most notable devices using this
PMIC are the Motorola Droid 4, Atrix 4G, and Droid X2.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Place Tegra124 SOR and eDP implenetation into common Tegra driver folder
until it is integrated into existing setup.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Since this set of drivers suports four Tegra SoC generations, lets name it
just 'tegra'.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
GPIO reset and power-off functionality depends on device tree data, which
is often absent in SPL or TPL. To address this, incorporate PHASE_ into the
config option and add Kconfig option or each phase.
Adjust SYSRESET_GPIO and POWEROFF_GPIO uses to address possible
regressions.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Historically, PLLD2 mirrored PLLD's layout on Tegra30 and 114. However,
with the introduction of Tegra124, this changed. This layout alteration was
not considered, and it now requires a corrective action to prevent future
complications.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
PLLD and PLLD2 clocks possess a unique enable bit within their
miscellaneous register. Take this into account when using clock_set_rate
function.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add missing configuration of chip select polarity. Default polarity is LOW,
which satisfies most cases but some devices require HIGH polarity and will
not work.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Simon Glass <sjg@chromium.org> says:
This series adds a cover-coverage check to CI for Binman. The iMX8 tests
are still not completed, so a work-around is included for those.
A few fixes are included for some other problems.
Link: https://lore.kernel.org/r/20250410124333.843527-1-sjg@chromium.org
Binman includes a good set of tests covering all of its functionality.
This includes a code-coverage test.
However to date the code-coverage test has not been checked
automatically by CI, relying on people to run 'binman test -T'
themselves.
Plug the gap to avoid bugs creeping in future.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Newer lz4 util is not happy with any padding at end of file,
it would abort with error message like:
Stream followed by undecodable data at position 43.
Workaround by skipping testCompUtilPadding test case and manually
strip padding in testCompressSectionSize test case.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
The CheckAddHashValue() function is always called before this one, so
the algorithm check is never used. Replace it with an assert to avoid a
coverage error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Newer versions of the python3-coverage tool require a directory
separator before and after the directory name. Add this so that system
package are not included in the coverage report.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini <trini@konsulko.com> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/20250401225851.1125678-1-trini@konsulko.com
Expand the conditional compilation section to explain when to use
CONFIG_IS_ENABLED rather than IS_ENABLED and provide an example. Next,
note what the PHASE_ macro is supposed to be used for as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
In order to make a start on explaining how and when to use certain
macros, we need to document their usage somewhere. As a first step, take
section 21 of the v6.13 Linux Kernel coding-style document on
conditional compilation, verbatim, and add it to our documentation.
Further rewording to be clearer about U-Boot will be done next.
Signed-off-by: Tom Rini <trini@konsulko.com>
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
When the `optee hello' subcommand is called, the do_optee_hello_world_ta()
function passes a NULL pointer to the strcmp() function while verifying its
input argument, which results in the following crash:
=> optee hello
"Synchronous Abort" handler, esr 0x96000010, far 0x0
Fix this by verifying the number of input arguments instead.
Fixes: e3cf80fbe0 ("cmd: Add support for optee commands")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jerome Forissier <jerome.forissier@linaro.org>
Cc: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
The number of memory banks in QEMU is not bounded by 1.
In this example we have two banks:
qemu-system-aarch64 \
-machine virt \
-nographic \
-cpu cortex-a72 \
-m 8G \
-smp 8,sockets=2,cores=4,threads=1 \
-object memory-backend-ram,id=mem0,size=4G \
-numa node,cpus=0-3,memdev=mem0 \
-object memory-backend-ram,id=mem1,size=4G \
-numa node,cpus=4-7,memdev=mem1 \
-bios u-boot.bin
Use the default value defined in /Kconfig as 4.
Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Suggested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The AM62x uses the DA8XX (DaVinci) GPIO controller. Enable
CONFIG_DA8XX_GPIO to support GPIO access from the Cortex-A53.
Also enable the 'gpio' command to allow users to interact
with GPIOs from the U-Boot shell.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
This enables the 'rproc' command, allowing users to
start, stop, and manage co-processors as well as load firmware
images.
Useful for systems with auxiliary cores, such as the M4 core
in the AM62x soc.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
This enables the 'rproc' command, allowing users to
start, stop, and manage co-processors as well as load firmware
images.
Useful for systems with auxiliary cores, such as M4 or R5 cores
in the AM64x soc.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The CI image does not ship with all tools required for the binman tests.
Have binman build the missing tools.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
-----BEGIN PGP SIGNATURE-----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=Ep2x
-----END PGP SIGNATURE-----
Merge tag 'qcom-for-2025.07' of https://source.denx.de/u-boot/custodians/u-boot-snapdragon
Qualcomm changes for v2025.07:
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/25653
There's been a surprising amount of activity lately on the Qualcomm
side with the two oldest boards getting some fresh attention and a lot
of cleanup and polish going on across the board.
* SDM660 gets USB phy fixes and a pinctrl driver
* The recently added SA8775P/QCS9100 SoC gets a pinctrl driver
* The Qualcomm pinctrl driver now handles reserved pins correctly,
fixing crashes on some boards when running "gpio status -a"
* OF_UPSTREAM_BUILD_VENDOR is enabled in qcom_defconfig
* SDM845 and SC7280 get missing clocks added (since we're now stricter
about those). This gets USB working more reliably in more cases.
* DM_USB_GADGET is enabled for all boards using DWC3 and fasbtoot is
enabled too
* A bug in the livetree fixup code is fixed (making USB work on a lot
more platforms)
* Button label lookup is made case insensitive* bootretry becomes more dynamic, allowing it to be hijacked to make a
"persistent" boot menu that allows dropping to U-Boot shell later on
* A new qcom-phone.config fragment is added along with a phone-specific
default environment and phone-specific debugging/bringup docs. These
make U-Boot more usable on devices without a serial port or keyboard.
* The db820c gets fixed up and updated documentation
* The db410c also gets some love and modernisation as well as a new
reviewer.
* A new driver is added for the USB VBUS regulator found on various
Qualcomm PMICs
* The Qualcomm SPMI driver gets some fixes and cleanup for SPMI v5 and
v7 support.
Documentation:
* Update authenticated capsules documentation
UEFI:
* add support for loading FIT images including initrd
- efi_loader: efi_load_initrd: provide a memory mapped initrd
- efi_loader: binary_run: register an initrd
- bootm: add support for initrd in do_bootm_efi
* efi_selftest: remove un-needed NULL checks
* efi: Fix efiboot for payloads loaded from memory
* Print extra information from the bootmgr
* Move public cert for capsules to .rodata
* set EFI capsule dfu_alt_info env explicitly
* Make FDT extra space configurable
* Install the ACPI table from the bloblist
* Handle GD_FLG_SKIP_RELOC
* handle malloc() errors
Others:
* acpi: select CONFIG_BLOBLIST
* smbios: select CONFIG_BLOBLIST
* xilinx: dfu: Fill directly update_info.dfu_string
* cmd: fwu: Dump custom fields from mdata structure
* board: remove capsule update support in set_dfu_alt_info()
-----BEGIN PGP SIGNATURE-----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=bdEe
-----END PGP SIGNATURE-----
Merge tag 'efi-2025-07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-07-rc1
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/25648
Documentation:
* Update authenticated capsules documentation
UEFI:
* Add support for loading FIT images including initrd
- efi_loader: efi_load_initrd: provide a memory mapped initrd
- efi_loader: binary_run: register an initrd
- bootm: add support for initrd in do_bootm_efi
* efi_selftest: remove un-needed NULL checks
* efi: Fix efiboot for payloads loaded from memory
* Print extra information from the bootmgr
* Move public cert for capsules to .rodata
* Set EFI capsule dfu_alt_info env explicitly
* Make FDT extra space configurable
* Install the ACPI table from the bloblist
* Handle GD_FLG_SKIP_RELOC
* Handle malloc() errors
Others:
* acpi: select CONFIG_BLOBLIST
* smbios: select CONFIG_BLOBLIST
* xilinx: dfu: Fill directly update_info.dfu_string
* cmd: fwu: Dump custom fields from mdata structure
* board: remove capsule update support in set_dfu_alt_info()
Ramon has been inactive on the U-Boot mailing list for over a year now and
the DB410c port has not been updated much lately. I've been doing most of
the DB410c-specific fixes/rework lately and try to test it every now and
then, so add myself as new maintainer. Also add Sam as reviewer, since he's
been doing lots of testing and reviews for MSM8916 recently.
Cc: Sam Day <me@samcday.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by:
Link: https://lore.kernel.org/r/20250407-db410c-fixes-v1-13-524aefbc8bb4@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
