Djam/u-boot
1
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2025-04-26 07:17:10 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Kbuild: Always use $(PHASE_)

Browse source 
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2025-04-01 16:55:23 -06:00
parent 3703298e57
commit 302b41d539
89 changed files with 242 additions and 248 deletions
Makefile
arch
arm
config.mk
cpu
arm920t
Makefile
arm926ejs
Makefile
armv7
Makefile
armv8
Makefile
lib
Makefile
mach-at91/arm926ejs
Makefile
mach-imx
Makefile
mach-omap2/am33xx
Makefile
mach-orion5x
Makefile
mach-stm32mp/stm32mp1
Makefile
mach-tegra
Makefile
tegra20
Makefile
tegra30
Makefile
mach-zynqmp
Makefile
riscv
Makefile
lib
Makefile
sandbox/lib
Makefile
x86
Makefile
cpu
Makefile
intel_common
Makefile
ivybridge
Makefile
qemu
Makefile
lib
Makefile
board
bosch/guardian
Makefile
freescale/common
Makefile
st/common
Makefile
tcl/sl50
Makefile
ti
am335x
Makefile
am43xx
Makefile
vscom/baltos
Makefile
xilinx/zynqmp
Makefile
boot
Makefile
cmd
Makefile
doc/develop
tests_writing.rst
drivers
Makefile
ata
Makefile
block
Makefile
bus
Makefile
core
Makefile
ddr/altera
Makefile
dfu
Makefile
firmware
Makefile
gpio
Makefile
i2c
Makefile
led
Makefile
mailbox
Makefile
misc
Makefile
mmc
Makefile
mux
Makefile
nvme
Makefile
phy
Makefile
cadence
Makefile
ti
Makefile
pinctrl
Makefile
power
domain
Makefile
pmic
Makefile
regulator
Makefile
remoteproc
Makefile
serial
Makefile
timer
Makefile
usb
cdns3
Makefile
common
Makefile
dwc3
Makefile
gadget/udc
Makefile
host
Makefile
video
Makefile
tidss
Makefile
fs
fat
Makefile
squashfs
Makefile
lib
Makefile
acpi
Makefile
aes
Makefile
crypto
Makefile
ecdsa
Makefile
lwip
Makefile
mbedtls
Makefile
net
Makefile
lwip
Makefile
scripts
Kbuild.includeMakefile.xpl
test
Makefile
boot
Makefile
cmd
Makefile
common
Makefile
fuzz
Makefile
lib
Makefile
tools
qconfig.py

4
Makefile
View file

@ -835,7 +835,7 @@ UBOOTINCLUDE := \
-I$(srctree)/lib/mbedtls/port \
-I$(srctree)/lib/mbedtls/external/mbedtls \
-I$(srctree)/lib/mbedtls/external/mbedtls/include) \
$(if $(CONFIG_$(XPL_)SYS_THUMB_BUILD), \
$(if $(CONFIG_$(PHASE_)SYS_THUMB_BUILD), \
$(if $(CONFIG_HAS_THUMB2), \
$(if $(CONFIG_CPU_V7M), \
-I$(srctree)/arch/arm/thumb1/include), \
@ -872,7 +872,7 @@ libs-y += disk/
libs-y += drivers/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
libs-$(CONFIG_$(XPL_)ALTERA_SDRAM) += drivers/ddr/altera/
libs-$(CONFIG_$(PHASE_)ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/usb/cdns3/
libs-y += drivers/usb/dwc3/
libs-y += drivers/usb/common/

6
arch/arm/config.mk
View file

@ -40,7 +40,7 @@ PLATFORM_ELFFLAGS += -B arm -O elf32-littlearm
endif
# Choose between ARM/Thumb instruction sets
ifeq ($(CONFIG_$(XPL_)SYS_THUMB_BUILD),y)
ifeq ($(CONFIG_$(PHASE_)SYS_THUMB_BUILD),y)
AFLAGS_IMPLICIT_IT := $(call as-option,-Wa$(comma)-mimplicit-it=always)
PF_CPPFLAGS_ARM := $(AFLAGS_IMPLICIT_IT) \
$(call cc-option, -mthumb -mthumb-interwork,\
@ -53,7 +53,7 @@ PF_CPPFLAGS_ARM := $(call cc-option,-marm,) \
endif
# Only test once
ifeq ($(CONFIG_$(XPL_)SYS_THUMB_BUILD),y)
ifeq ($(CONFIG_$(PHASE_)SYS_THUMB_BUILD),y)
archprepare: checkthumb checkgcc6
checkthumb:
@ -116,7 +116,7 @@ LDFLAGS_u-boot += -pie
#
# http://sourceware.org/bugzilla/show_bug.cgi?id=12532
#
ifeq ($(CONFIG_$(XPL_)SYS_THUMB_BUILD),y)
ifeq ($(CONFIG_$(PHASE_)SYS_THUMB_BUILD),y)
ifeq ($(GAS_BUG_12532),)
export GAS_BUG_12532:=$(shell if [ $(call binutils-version) -lt 0222 ] ; \
then echo y; else echo n; fi)

2
arch/arm/cpu/arm920t/Makefile
View file

@ -9,6 +9,6 @@ obj-y += cpu.o
# some files can only build in ARM mode
ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
CFLAGS_cpu.o := -marm
endif

2
arch/arm/cpu/arm926ejs/Makefile
View file

@ -17,7 +17,7 @@ obj-$(CONFIG_ARCH_SUNXI) += sunxi/
# some files can only build in ARM or THUMB2, not THUMB1
ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
ifndef CONFIG_HAS_THUMB2
CFLAGS_cpu.o := -marm

2
arch/arm/cpu/armv7/Makefile
View file

@ -17,7 +17,7 @@ obj-$(CONFIG_EFI_LOADER) += sctlr.o
obj-$(CONFIG_ARMV7_NONSEC) += exception_level.o
endif
ifneq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),y)
ifneq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),y)
obj-y += lowlevel_init.o
endif

4
arch/arm/cpu/armv8/Makefile
View file

@ -9,7 +9,7 @@ obj-y += cpu.o
ifndef CONFIG_$(PHASE_)TIMER
obj-$(CONFIG_SYS_ARCH_TIMER) += generic_timer.o
endif
ifndef CONFIG_$(XPL_)SYS_DCACHE_OFF
ifndef CONFIG_$(PHASE_)SYS_DCACHE_OFF
obj-y += cache_v8.o
obj-y += cache.o
endif
@ -33,7 +33,7 @@ obj-$(CONFIG_ACPI_PARKING_PROTOCOL) += acpi_park_v8.o
else
obj-$(CONFIG_ARCH_SUNXI) += fel_utils.o
endif
obj-$(CONFIG_$(XPL_)ARMV8_SEC_FIRMWARE_SUPPORT) += sec_firmware.o sec_firmware_asm.o
obj-$(CONFIG_$(PHASE_)ARMV8_SEC_FIRMWARE_SUPPORT) += sec_firmware.o sec_firmware_asm.o
ifdef CONFIG_XPL_BUILD
obj-$(CONFIG_SPL_RECOVER_DATA_SECTION) += spl_data.o

2
arch/arm/lib/Makefile
View file

@ -96,7 +96,7 @@ endif
# some files can only build in ARM or THUMB2, not THUMB1
ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
asflags-$(CONFIG_HAS_THUMB2) += -DCONFIG_THUMB2_KERNEL
ifndef CONFIG_HAS_THUMB2

2
arch/arm/mach-at91/arm926ejs/Makefile
View file

@ -32,7 +32,7 @@ obj-y += lowlevel_init.o
endif
endif
ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
ifndef CONFIG_HAS_THUMB2
CFLAGS_cache.o := -marm

2
arch/arm/mach-imx/Makefile
View file

@ -60,7 +60,7 @@ obj-$(CONFIG_IMX_RDC) += rdc-sema.o
ifneq ($(CONFIG_XPL_BUILD),y)
obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
endif
obj-$(CONFIG_$(XPL_)SATA) += sata.o
obj-$(CONFIG_$(PHASE_)SATA) += sata.o
obj-$(CONFIG_IMX_HAB) += hab.o
obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o
endif

2
arch/arm/mach-omap2/am33xx/Makefile
View file

@ -11,7 +11,7 @@ endif
obj-y += sys_info.o
obj-y += ddr.o
ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y += emif4.o
endif
obj-y += board.o

4
arch/arm/mach-orion5x/Makefile
View file

@ -11,13 +11,13 @@ obj-y = cpu.o
obj-y += dram.o
obj-y += timer.o
ifndef CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT
ifndef CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT
obj-y += lowlevel_init.o
endif
# some files can only build in ARM or THUMB2, not THUMB1
ifdef CONFIG_$(XPL_)SYS_THUMB_BUILD
ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
ifndef CONFIG_HAS_THUMB2
CFLAGS_cpu.o := -marm

2
arch/arm/mach-stm32mp/stm32mp1/Makefile
View file

@ -15,5 +15,5 @@ else
obj-$(CONFIG_ARMV7_PSCI) += psci.o
endif
obj-$(CONFIG_$(XPL_)STM32MP15_PWR) += pwr_regulator.o
obj-$(CONFIG_$(PHASE_)STM32MP15_PWR) += pwr_regulator.o
obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o

2
arch/arm/mach-tegra/Makefile
View file

@ -16,7 +16,7 @@ obj-$(CONFIG_TEGRA_GP_PADCTRL) += ap.o
obj-y += board.o board2.o
obj-y += cache.o
obj-$(CONFIG_TEGRA_CLKRST) += clock.o
obj-$(CONFIG_$(XPL_)TEGRA_CRYPTO) += crypto.o
obj-$(CONFIG_$(PHASE_)TEGRA_CRYPTO) += crypto.o
obj-$(CONFIG_TEGRA_PMC) += powergate.o
obj-y += xusb-padctl-dummy.o

2
arch/arm/mach-tegra/tegra20/Makefile
View file

@ -3,7 +3,7 @@
# (C) Copyright 2010,2011 Nvidia Corporation.
obj-$(CONFIG_XPL_BUILD) += cpu.o
obj-$(CONFIG_$(XPL_)CMD_EBTUPDATE) += bct.o
obj-$(CONFIG_$(PHASE_)CMD_EBTUPDATE) += bct.o
# The AVP is ARMv4T architecture so we must use special compiler
# flags for any startup files it might use.

2
arch/arm/mach-tegra/tegra30/Makefile
View file

@ -3,6 +3,6 @@
# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
obj-$(CONFIG_XPL_BUILD) += cpu.o
obj-$(CONFIG_$(XPL_)CMD_EBTUPDATE) += bct.o
obj-$(CONFIG_$(PHASE_)CMD_EBTUPDATE) += bct.o
obj-y += clock.o

2
arch/arm/mach-zynqmp/Makefile
View file

@ -7,7 +7,7 @@ obj-y += aes.o clk.o cpu.o
obj-$(CONFIG_MP) += mp.o
obj-$(CONFIG_XPL_BUILD) += spl.o handoff.o psu_spl_init.o
obj-$(CONFIG_SPL_ZYNQMP_DRAM_ECC_INIT) += ecc_spl_init.o
obj-$(CONFIG_$(XPL_)ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o
obj-$(CONFIG_$(PHASE_)ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o
ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_CMD_ZYNQMP) += zynqmp.o

2
arch/riscv/Makefile
View file

@ -48,7 +48,7 @@ endif
ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
-mcmodel=$(CMODEL)
ifeq ($(CONFIG_$(XPL_)FRAMEPOINTER),y)
ifeq ($(CONFIG_$(PHASE_)FRAMEPOINTER),y)
ARCH_FLAGS += -fno-omit-frame-pointer
endif

8
arch/riscv/lib/Makefile
View file

@ -11,19 +11,19 @@ obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o
obj-$(CONFIG_CMD_GO) += boot.o
obj-y += cache.o
obj-$(CONFIG_SIFIVE_CACHE) += sifive_cache.o
ifeq ($(CONFIG_$(XPL_)RISCV_MMODE),y)
obj-$(CONFIG_$(XPL_)RISCV_ACLINT) += aclint_ipi.o
ifeq ($(CONFIG_$(PHASE_)RISCV_MMODE),y)
obj-$(CONFIG_$(PHASE_)RISCV_ACLINT) += aclint_ipi.o
obj-$(CONFIG_ANDES_PLICSW) += andes_plicsw.o
else
obj-$(CONFIG_SBI) += sbi.o
obj-$(CONFIG_SBI_IPI) += sbi_ipi.o
endif
obj-y += interrupts.o
ifeq ($(CONFIG_$(XPL_)SYSRESET),)
ifeq ($(CONFIG_$(PHASE_)SYSRESET),)
obj-y += reset.o
endif
obj-y += setjmp.o
obj-$(CONFIG_$(XPL_)SMP) += smp.o
obj-$(CONFIG_$(PHASE_)SMP) += smp.o
obj-$(CONFIG_XPL_BUILD) += spl.o
obj-y += fdt_fixup.o
obj-$(CONFIG_$(SPL)CMD_BDI) += bdinfo.o

2
arch/sandbox/lib/Makefile
View file

@ -9,4 +9,4 @@ obj-y += fdt_fixup.o interrupts.o
obj-$(CONFIG_PCI) += pci_io.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_CMD_BOOTZ) += bootm.o
obj-$(CONFIG_$(SPL_)ACPIGEN) += acpi_table.o
obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi_table.o

2
arch/x86/Makefile
View file

@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
ifeq ($(CONFIG_EFI_APP),)
ifdef CONFIG_$(XPL_)X86_64
ifdef CONFIG_$(PHASE_)X86_64
head-y := arch/x86/cpu/start64.o
else
ifeq ($(CONFIG_$(PHASE_)X86_16BIT_INIT),y)

12
arch/x86/cpu/Makefile
View file

@ -6,7 +6,7 @@
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
ifeq ($(CONFIG_$(XPL_)X86_64),y)
ifeq ($(CONFIG_$(PHASE_)X86_64),y)
extra-y = start64.o
else
ifeq ($(CONFIG_$(PHASE_)X86_16BIT_INIT),y)
@ -31,7 +31,7 @@ ifndef CONFIG_TPL_BUILD
obj-y += cpu_x86.o
endif
ifndef CONFIG_$(XPL_)X86_64
ifndef CONFIG_$(PHASE_)X86_64
AFLAGS_REMOVE_call32.o := -mregparm=3 \
$(if $(CONFIG_EFI_STUB_64BIT),-march=i386 -m32)
AFLAGS_call32.o := -fpic -fshort-wchar \
@ -59,18 +59,18 @@ obj-$(CONFIG_QFW) += qfw_cpu.o
ifndef CONFIG_SYS_COREBOOT
obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += irq.o
endif
ifndef CONFIG_$(XPL_)X86_64
obj-$(CONFIG_$(XPL_)SMP) += mp_init.o
ifndef CONFIG_$(PHASE_)X86_64
obj-$(CONFIG_$(PHASE_)SMP) += mp_init.o
endif
obj-y += mtrr.o
obj-$(CONFIG_PCI) += pci.o
ifndef CONFIG_$(XPL_)X86_64
ifndef CONFIG_$(PHASE_)X86_64
obj-$(CONFIG_SMP) += sipi_vector.o
endif
obj-y += turbo.o
obj-$(CONFIG_HAVE_ACPI_RESUME) += wakeup.o
ifeq ($(CONFIG_$(XPL_)X86_64),y)
ifeq ($(CONFIG_$(PHASE_)X86_64),y)
obj-y += x86_64/
else
obj-y += i386/

4
arch/x86/cpu/intel_common/Makefile
View file

@ -26,10 +26,10 @@ obj-y += cpu.o
obj-y += fast_spi.o
obj-y += lpc.o
obj-y += lpss.o
obj-$(CONFIG_$(XPL_)INTEL_GENERIC_WIFI) += generic_wifi.o
obj-$(CONFIG_$(PHASE_)INTEL_GENERIC_WIFI) += generic_wifi.o
ifndef CONFIG_EFI_APP
obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += microcode.o
ifndef CONFIG_$(XPL_)X86_64
ifndef CONFIG_$(PHASE_)X86_64
obj-y += microcode.o
endif
endif

6
arch/x86/cpu/ivybridge/Makefile
View file

@ -5,15 +5,15 @@
ifdef CONFIG_HAVE_FSP
obj-y += fsp_configs.o ivybridge.o
else
obj-$(CONFIG_$(XPL_)X86_32BIT_INIT) += cpu.o
obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += cpu.o
obj-y += early_me.o
obj-y += lpc.o
obj-y += northbridge.o
ifndef CONFIG_XPL_BUILD
obj-y += sata.o
endif
obj-$(CONFIG_$(XPL_)X86_32BIT_INIT) += sdram.o
ifndef CONFIG_$(XPL_)X86_32BIT_INIT
obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += sdram.o
ifndef CONFIG_$(PHASE_)X86_32BIT_INIT
obj-y += sdram_nop.o
endif
endif

2
arch/x86/cpu/qemu/Makefile
View file

@ -2,7 +2,7 @@
#
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
ifndef CONFIG_$(XPL_)X86_64
ifndef CONFIG_$(PHASE_)X86_64
obj-y += car.o
endif
obj-y += dram.o

4
arch/x86/lib/Makefile
View file

@ -19,7 +19,7 @@ ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_CMD_BOOTM) += bootm.o
endif
obj-y += cmd_boot.o
obj-$(CONFIG_$(XPL_)COREBOOT_SYSINFO) += coreboot/
obj-$(CONFIG_$(PHASE_)COREBOOT_SYSINFO) += coreboot/
obj-$(CONFIG_SEABIOS) += coreboot_table.o
obj-y += early_cmos.o
obj-y += e820.o
@ -90,7 +90,7 @@ endif
ifdef CONFIG_EFI_STUB
ifeq ($(CONFIG_$(XPL_)X86_64),)
ifeq ($(CONFIG_$(PHASE_)X86_64),)
extra-y += $(EFI_CRT0) $(EFI_RELOC)
endif

2
board/bosch/guardian/Makefile
View file

@ -5,7 +5,7 @@
# Copyright (C) 2018 Robert Bosch Power Tools GmbH
#
ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

4
board/freescale/common/Makefile
View file

@ -34,7 +34,7 @@ obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
endif
obj-$(I2C_COMMON) += i2c_common.o
obj-$(CONFIG_FSL_USE_PCA9547_MUX) += i2c_mux.o
obj-$(CONFIG_$(XPL_)VID) += vid.o
obj-$(CONFIG_$(PHASE_)VID) += vid.o
obj-$(CONFIG_FSL_QIXIS) += qixis.o
ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o
@ -54,7 +54,7 @@ obj-$(CONFIG_TARGET_MPC8548CDS) += cds_pci_ft.o
obj-$(CONFIG_TARGET_P3041DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P4080DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P5040DS) += ics307_clk.o
ifeq ($(CONFIG_$(XPL_)POWER_LEGACY),y)
ifeq ($(CONFIG_$(PHASE_)POWER_LEGACY),y)
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
endif
obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze.o

2
board/st/common/Makefile
View file

@ -8,7 +8,7 @@ obj-$(CONFIG_PMIC_STPMIC1) += stpmic1.o
ifeq ($(CONFIG_ARCH_STM32MP),y)
obj-$(CONFIG_SET_DFU_ALT_INFO) += stm32mp_dfu.o
obj-$(CONFIG_$(XPL_)DFU_VIRT) += stm32mp_dfu_virt.o
obj-$(CONFIG_$(PHASE_)DFU_VIRT) += stm32mp_dfu_virt.o
endif
obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o

2
board/tcl/sl50/Makefile
View file

@ -4,7 +4,7 @@
#
# Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/
ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

2
board/ti/am335x/Makefile
View file

@ -4,7 +4,7 @@
#
# Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

2
board/ti/am43xx/Makefile
View file

@ -4,7 +4,7 @@
#
# Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

2
board/vscom/baltos/Makefile
View file

@ -4,7 +4,7 @@
#
# Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
ifeq ($(CONFIG_$(XPL_)SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(PHASE_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

2
board/xilinx/zynqmp/Makefile
View file

@ -31,7 +31,7 @@ $(warning Put custom psu_init_gpl.c/h to board/xilinx/zynqmp/custom_hw_platform/
endif
endif
obj-$(CONFIG_$(XPL_)ZYNQMP_PSU_INIT_ENABLED) += $(init-objs)
obj-$(CONFIG_$(PHASE_)ZYNQMP_PSU_INIT_ENABLED) += $(init-objs)
ifdef CONFIG_XPL_BUILD
ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"")

2
boot/Makefile
View file

@ -47,7 +47,7 @@ obj-$(CONFIG_$(PHASE_)UPL_WRITE) += upl_write.o
obj-$(CONFIG_$(PHASE_)OF_LIBFDT) += image-fdt.o
obj-$(CONFIG_$(PHASE_)FIT_SIGNATURE) += fdt_region.o
obj-$(CONFIG_$(PHASE_)FIT) += image-fit.o
obj-$(CONFIG_$(XPL_)MULTI_DTB_FIT) += boot_fit.o common_fit.o
obj-$(CONFIG_$(PHASE_)MULTI_DTB_FIT) += boot_fit.o common_fit.o
obj-$(CONFIG_$(PHASE_)IMAGE_PRE_LOAD) += image-pre-load.o
obj-$(CONFIG_$(PHASE_)IMAGE_SIGN_INFO) += image-sig.o
obj-$(CONFIG_$(PHASE_)FIT_SIGNATURE) += image-fit-sig.o

2
cmd/Makefile
View file

@ -255,7 +255,7 @@ obj-$(CONFIG_ARCH_K3) += ti/
obj-$(CONFIG_ARCH_OMAP2PLUS) += ti/
endif # !CONFIG_XPL_BUILD
obj-$(CONFIG_$(XPL_)CMD_TLV_EEPROM) += tlv_eeprom.o
obj-$(CONFIG_$(PHASE_)CMD_TLV_EEPROM) += tlv_eeprom.o
obj-$(CONFIG_CMD_BCM_EXT_UTILS) += broadcom/

6
doc/develop/tests_writing.rst
View file

@ -309,15 +309,15 @@ an #ifdef since the suite will automatically be compiled out in that case.
Finally, add the test to the build by adding to the Makefile in the same
directory::
obj-$(CONFIG_$(XPL_)CMDLINE) += wibble.o
obj-$(CONFIG_$(PHASE_)CMDLINE) += wibble.o
Note that CMDLINE is never enabled in SPL, so this test will only be present in
U-Boot proper. See below for how to do SPL tests.
You can add an extra Kconfig check if needed::
ifneq ($(CONFIG_$(XPL_)WIBBLE),)
obj-$(CONFIG_$(XPL_)CMDLINE) += wibble.o
ifneq ($(CONFIG_$(PHASE_)WIBBLE),)
obj-$(CONFIG_$(PHASE_)CMDLINE) += wibble.o
endif
Each suite can have an optional init and uninit function. These are run before

14
drivers/Makefile
View file

@ -34,15 +34,15 @@ obj-$(CONFIG_$(PHASE_)SERIAL) += serial/
obj-$(CONFIG_$(PHASE_)SPI) += spi/
obj-$(CONFIG_$(PHASE_)TIMER) += timer/
obj-$(CONFIG_$(PHASE_)VIRTIO) += virtio/
obj-$(CONFIG_$(XPL_)DM_MAILBOX) += mailbox/
obj-$(CONFIG_$(XPL_)REMOTEPROC) += remoteproc/
obj-$(CONFIG_$(XPL_)SYSINFO) += sysinfo/
obj-$(CONFIG_$(PHASE_)DM_MAILBOX) += mailbox/
obj-$(CONFIG_$(PHASE_)REMOTEPROC) += remoteproc/
obj-$(CONFIG_$(PHASE_)SYSINFO) += sysinfo/
obj-$(CONFIG_$(PHASE_)SM) += sm/
obj-$(CONFIG_$(PHASE_)TPM) += tpm/
obj-$(CONFIG_$(XPL_)NVME) += nvme/
obj-$(CONFIG_$(PHASE_)NVME) += nvme/
obj-$(CONFIG_XEN) += xen/
obj-$(CONFIG_$(XPL_)FPGA) += fpga/
obj-$(CONFIG_$(XPL_)VIDEO) += video/
obj-$(CONFIG_$(PHASE_)FPGA) += fpga/
obj-$(CONFIG_$(PHASE_)VIDEO) += video/
obj-y += bus/
@ -55,7 +55,7 @@ obj-$(CONFIG_SPL_CRYPTO) += crypto/
obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR) += ddr/fsl/
obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
obj-$(CONFIG_$(XPL_)ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_$(PHASE_)ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
obj-$(CONFIG_IMX8ULP_DRAM) += ddr/imx/imx8ulp/
obj-$(CONFIG_ARCH_IMX9) += ddr/imx/imx9/

2
drivers/ata/Makefile
View file

@ -5,7 +5,7 @@
obj-$(CONFIG_DWC_AHCI) += dwc_ahci.o
obj-$(CONFIG_AHCI) += ahci-uclass.o
obj-$(CONFIG_$(XPL_)AHCI_PCI) += ahci-pci.o
obj-$(CONFIG_$(PHASE_)AHCI_PCI) += ahci-pci.o
obj-$(CONFIG_SCSI_AHCI) += ahci.o
obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
obj-$(CONFIG_FSL_SATA) += fsl_sata.o

2
drivers/block/Makefile
View file

@ -5,7 +5,7 @@
obj-$(CONFIG_$(PHASE_)BLK) += blk-uclass.o
ifndef CONFIG_$(XPL_)BLK
ifndef CONFIG_$(PHASE_)BLK
obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o
endif

2
drivers/bus/Makefile
View file

@ -8,4 +8,4 @@ obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
endif
obj-$(CONFIG_$(XPL_)TI_SYSC) += ti-sysc.o
obj-$(CONFIG_$(PHASE_)TI_SYSC) += ti-sysc.o

6
drivers/core/Makefile
View file

@ -6,16 +6,16 @@ obj-y += device.o fdtaddr.o lists.o root.o uclass.o util.o tag.o
obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi.o
obj-$(CONFIG_$(PHASE_)DEVRES) += devres.o
obj-$(CONFIG_$(PHASE_)DM_DEVICE_REMOVE) += device-remove.o
obj-$(CONFIG_$(XPL_)SIMPLE_BUS) += simple-bus.o
obj-$(CONFIG_$(PHASE_)SIMPLE_BUS) += simple-bus.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_DM) += dump.o
obj-$(CONFIG_$(PHASE_)REGMAP) += regmap.o
obj-$(CONFIG_$(PHASE_)SYSCON) += syscon-uclass.o
obj-$(CONFIG_$(XPL_)OF_LIVE) += of_access.o of_addr.o
obj-$(CONFIG_$(PHASE_)OF_LIVE) += of_access.o of_addr.o
ifndef CONFIG_DM_DEV_READ_INLINE
obj-$(CONFIG_OF_CONTROL) += read.o
endif
obj-$(CONFIG_$(XPL_)OF_PLATDATA) += read.o
obj-$(CONFIG_$(PHASE_)OF_PLATDATA) += read.o
obj-$(CONFIG_OF_CONTROL) += of_extra.o ofnode.o read_extra.o ofnode_graph.o
ccflags-$(CONFIG_DM_DEBUG) += -DDEBUG

2
drivers/ddr/altera/Makefile
View file

@ -6,7 +6,7 @@
# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
# Copyright (C) 2014-2025 Altera Corporation <www.altera.com>
ifdef CONFIG_$(XPL_)ALTERA_SDRAM
ifdef CONFIG_$(PHASE_)ALTERA_SDRAM
obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram_gen5.o sequencer.o
obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += sdram_arria10.o
obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_soc64.o sdram_s10.o

18
drivers/dfu/Makefile
View file

@ -3,12 +3,12 @@
# Copyright (C) 2012 Samsung Electronics
# Lukasz Majewski <l.majewski@samsung.com>
obj-$(CONFIG_$(XPL_)DFU) += dfu.o
obj-$(CONFIG_$(XPL_)DFU_MMC) += dfu_mmc.o
obj-$(CONFIG_$(XPL_)DFU_MTD) += dfu_mtd.o
obj-$(CONFIG_$(XPL_)DFU_NAND) += dfu_nand.o
obj-$(CONFIG_$(XPL_)DFU_RAM) += dfu_ram.o
obj-$(CONFIG_$(XPL_)DFU_SF) += dfu_sf.o
obj-$(CONFIG_$(XPL_)DFU_WRITE_ALT) += dfu_alt.o
obj-$(CONFIG_$(XPL_)DFU_VIRT) += dfu_virt.o
obj-$(CONFIG_$(XPL_)DFU_SCSI) += dfu_scsi.o
obj-$(CONFIG_$(PHASE_)DFU) += dfu.o
obj-$(CONFIG_$(PHASE_)DFU_MMC) += dfu_mmc.o
obj-$(CONFIG_$(PHASE_)DFU_MTD) += dfu_mtd.o
obj-$(CONFIG_$(PHASE_)DFU_NAND) += dfu_nand.o
obj-$(CONFIG_$(PHASE_)DFU_RAM) += dfu_ram.o
obj-$(CONFIG_$(PHASE_)DFU_SF) += dfu_sf.o
obj-$(CONFIG_$(PHASE_)DFU_WRITE_ALT) += dfu_alt.o
obj-$(CONFIG_$(PHASE_)DFU_VIRT) += dfu_virt.o
obj-$(CONFIG_$(PHASE_)DFU_SCSI) += dfu_scsi.o

2
drivers/firmware/Makefile
View file

@ -1,5 +1,5 @@
obj-$(CONFIG_FIRMWARE) += firmware-uclass.o
obj-$(CONFIG_$(XPL_)ARM_PSCI_FW) += psci.o
obj-$(CONFIG_$(PHASE_)ARM_PSCI_FW) += psci.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_SANDBOX) += firmware-sandbox.o
obj-$(CONFIG_ZYNQMP_FIRMWARE) += firmware-zynqmp.o

10
drivers/gpio/Makefile
View file

@ -10,7 +10,7 @@ obj-$(CONFIG_DM_74X164) += 74x164_gpio.o
endif
obj-$(CONFIG_$(PHASE_)DM_GPIO) += gpio-uclass.o
obj-$(CONFIG_$(XPL_)DM_PCA953X) += pca953x_gpio.o
obj-$(CONFIG_$(PHASE_)DM_PCA953X) += pca953x_gpio.o
obj-$(CONFIG_ADI_GPIO) += gpio-adi-adsp.o
obj-$(CONFIG_ASPEED_GPIO) += gpio-aspeed.o
@ -59,12 +59,12 @@ obj-$(CONFIG_VYBRID_GPIO) += vybrid_gpio.o
obj-$(CONFIG_HIKEY_GPIO) += hi6220_gpio.o
obj-$(CONFIG_HSDK_CREG_GPIO) += hsdk-creg-gpio.o
obj-$(CONFIG_IMX_RGPIO2P) += imx_rgpio2p.o
obj-$(CONFIG_$(XPL_)PALMAS_GPIO) += palmas_gpio.o
obj-$(CONFIG_$(PHASE_)PALMAS_GPIO) += palmas_gpio.o
obj-$(CONFIG_PIC32_GPIO) += pic32_gpio.o
obj-$(CONFIG_OCTEON_GPIO) += octeon_gpio.o
obj-$(CONFIG_MVEBU_GPIO) += mvebu_gpio.o
obj-$(CONFIG_MSM_GPIO) += msm_gpio.o
obj-$(CONFIG_$(XPL_)PCF8575_GPIO) += pcf8575_gpio.o
obj-$(CONFIG_$(PHASE_)PCF8575_GPIO) += pcf8575_gpio.o
obj-$(CONFIG_$(PHASE_)QCOM_PMIC_GPIO) += qcom_pmic_gpio.o
obj-$(CONFIG_MT7620_GPIO) += mt7620_gpio.o
obj-$(CONFIG_MT7621_GPIO) += mt7621_gpio.o
@ -73,11 +73,11 @@ obj-$(CONFIG_NX_GPIO) += nx_gpio.o
obj-$(CONFIG_SIFIVE_GPIO) += sifive-gpio.o
obj-$(CONFIG_NOMADIK_GPIO) += nmk_gpio.o
obj-$(CONFIG_MAX7320_GPIO) += max7320_gpio.o
obj-$(CONFIG_$(XPL_)MAX77663_GPIO) += max77663_gpio.o
obj-$(CONFIG_$(PHASE_)MAX77663_GPIO) += max77663_gpio.o
obj-$(CONFIG_SL28CPLD_GPIO) += sl28cpld-gpio.o
obj-$(CONFIG_ADP5588_GPIO) += adp5588_gpio.o
obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN) += zynqmp_gpio_modepin.o
obj-$(CONFIG_SLG7XL45106_I2C_GPO) += gpio_slg7xl45106.o
obj-$(CONFIG_FTGPIO010) += ftgpio010.o
obj-$(CONFIG_$(SPL_)ADP5585_GPIO) += adp5585_gpio.o
obj-$(CONFIG_$(PHASE_)ADP5585_GPIO) += adp5585_gpio.o
obj-$(CONFIG_RZG2L_GPIO) += rzg2l-gpio.o

16
drivers/i2c/Makefile
View file

@ -2,15 +2,15 @@
#
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-$(CONFIG_$(XPL_)DM_I2C) += i2c-uclass.o
ifdef CONFIG_$(XPL_)ACPIGEN
obj-$(CONFIG_$(XPL_)DM_I2C) += acpi_i2c.o
obj-$(CONFIG_$(PHASE_)DM_I2C) += i2c-uclass.o
ifdef CONFIG_$(PHASE_)ACPIGEN
obj-$(CONFIG_$(PHASE_)DM_I2C) += acpi_i2c.o
endif
obj-$(CONFIG_$(XPL_)DM_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_$(XPL_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
obj-$(CONFIG_$(XPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
obj-$(CONFIG_$(PHASE_)DM_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_$(PHASE_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
obj-$(CONFIG_$(PHASE_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
obj-$(CONFIG_$(XPL_)SYS_I2C_LEGACY) += i2c_core.o
obj-$(CONFIG_$(PHASE_)SYS_I2C_LEGACY) += i2c_core.o
obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o
obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o
obj-$(CONFIG_SYS_I2C_AST2600) += ast2600_i2c.o
@ -58,4 +58,4 @@ obj-$(CONFIG_SYS_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_SYS_I2C_XILINX_XIIC) += xilinx_xiic.o
obj-$(CONFIG_TEGRA186_BPMP_I2C) += tegra186_bpmp_i2c.o
obj-$(CONFIG_$(XPL_)I2C_MUX) += muxes/
obj-$(CONFIG_$(PHASE_)I2C_MUX) += muxes/

2
drivers/led/Makefile
View file

@ -10,6 +10,6 @@ obj-$(CONFIG_LED_BCM6358) += led_bcm6358.o
obj-$(CONFIG_LED_BCM6753) += led_bcm6753.o
obj-$(CONFIG_LED_BCM6858) += led_bcm6858.o
obj-$(CONFIG_LED_PWM) += led_pwm.o
obj-$(CONFIG_$(XPL_)LED_GPIO) += led_gpio.o
obj-$(CONFIG_$(PHASE_)LED_GPIO) += led_gpio.o
obj-$(CONFIG_LED_CORTINA) += led_cortina.o
obj-$(CONFIG_LED_LP5562) += led_lp5562.o

2
drivers/mailbox/Makefile
View file

@ -3,7 +3,7 @@
# Copyright (c) 2016, NVIDIA CORPORATION.
#
obj-$(CONFIG_$(XPL_)DM_MAILBOX) += mailbox-uclass.o
obj-$(CONFIG_$(PHASE_)DM_MAILBOX) += mailbox-uclass.o
obj-$(CONFIG_APPLE_MBOX) += apple-mbox.o
obj-$(CONFIG_IMX_MU_MBOX) += imx-mailbox.o
obj-$(CONFIG_SANDBOX_MBOX) += sandbox-mbox.o

10
drivers/misc/Makefile
View file

@ -18,7 +18,7 @@ obj-$(CONFIG_SANDBOX) += p2sb_sandbox.o p2sb_emul.o
obj-$(CONFIG_SANDBOX) += swap_case.o
endif
ifdef CONFIG_$(XPL_)DM_I2C
ifdef CONFIG_$(PHASE_)DM_I2C
ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
obj-$(CONFIG_USB_HUB_USB251XB) += usb251xb.o
@ -37,14 +37,14 @@ obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_FSL_IIM) += fsl_iim.o
obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
obj-$(CONFIG_$(XPL_)FS_LOADER) += fs_loader.o
obj-$(CONFIG_$(PHASE_)FS_LOADER) += fs_loader.o
obj-$(CONFIG_GATEWORKS_SC) += gsc.o
obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o
obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
obj-$(CONFIG_GDSYS_SOC) += gdsys_soc.o
obj-$(CONFIG_IRQ) += irq-uclass.o
obj-$(CONFIG_SANDBOX) += irq_sandbox.o irq_sandbox_test.o
obj-$(CONFIG_$(XPL_)I2C_EEPROM) += i2c_eeprom.o
obj-$(CONFIG_$(PHASE_)I2C_EEPROM) += i2c_eeprom.o
obj-$(CONFIG_IHS_FPGA) += ihs_fpga.o
obj-$(CONFIG_IMX8) += imx8/
obj-$(CONFIG_IMX_ELE) += imx_ele/
@ -52,14 +52,14 @@ obj-$(CONFIG_LED_STATUS) += status_led.o
obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o
obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o
obj-$(CONFIG_$(PHASE_)LS2_SFP) += ls2_sfp.o
obj-$(CONFIG_$(XPL_)MXC_OCOTP) += mxc_ocotp.o
obj-$(CONFIG_$(PHASE_)MXC_OCOTP) += mxc_ocotp.o
obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
obj-$(CONFIG_NPCM_OTP) += npcm_otp.o
obj-$(CONFIG_NPCM_HOST) += npcm_host_intf.o
obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o
obj-$(CONFIG_P2SB) += p2sb-uclass.o
obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
obj-$(CONFIG_$(XPL_)PWRSEQ) += pwrseq-uclass.o
obj-$(CONFIG_$(PHASE_)PWRSEQ) += pwrseq-uclass.o
ifdef CONFIG_QFW
obj-y += qfw.o
obj-$(CONFIG_QFW_ACPI) += qfw_acpi.o

6
drivers/mmc/Makefile
View file

@ -4,17 +4,17 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-y += mmc.o
obj-$(CONFIG_$(XPL_)DM_MMC) += mmc-uclass.o
obj-$(CONFIG_$(PHASE_)DM_MMC) += mmc-uclass.o
ifdef CONFIG_$(PHASE_)DM_MMC
obj-$(CONFIG_$(PHASE_)BOOTSTD) += mmc_bootdev.o
endif
obj-$(CONFIG_$(PHASE_)MMC_WRITE) += mmc_write.o
obj-$(CONFIG_$(XPL_)MMC_PWRSEQ) += mmc-pwrseq.o
obj-$(CONFIG_$(PHASE_)MMC_PWRSEQ) += mmc-pwrseq.o
obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o
ifndef CONFIG_$(XPL_)BLK
ifndef CONFIG_$(PHASE_)BLK
obj-y += mmc_legacy.o
endif

2
drivers/mux/Makefile
View file

@ -4,4 +4,4 @@
# Jean-Jacques Hiblot <jjhiblot@ti.com>
obj-$(CONFIG_MULTIPLEXER) += mux-uclass.o
obj-$(CONFIG_$(XPL_)MUX_MMIO) += mmio.o
obj-$(CONFIG_$(PHASE_)MUX_MMIO) += mmio.o

2
drivers/nvme/Makefile
View file

@ -4,4 +4,4 @@
obj-y += nvme-uclass.o nvme.o nvme_show.o
obj-$(CONFIG_NVME_APPLE) += nvme_apple.o
obj-$(CONFIG_$(XPL_)NVME_PCI) += nvme_pci.o
obj-$(CONFIG_$(PHASE_)NVME_PCI) += nvme_pci.o

6
drivers/phy/Makefile
View file

@ -8,8 +8,8 @@ obj-y += marvell/
obj-y += rockchip/
obj-y += socionext/
obj-$(CONFIG_$(XPL_)PHY) += phy-uclass.o
obj-$(CONFIG_$(XPL_)NOP_PHY) += nop-phy.o
obj-$(CONFIG_$(PHASE_)PHY) += phy-uclass.o
obj-$(CONFIG_$(PHASE_)NOP_PHY) += nop-phy.o
obj-$(CONFIG_MIPI_DPHY_HELPERS) += phy-core-mipi-dphy.o
obj-$(CONFIG_AB8500_USB_PHY) += phy-ab8500-usb.o
obj-$(CONFIG_APPLE_ATCPHY) += phy-apple-atc.o
@ -19,7 +19,7 @@ obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o
obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o
obj-$(CONFIG_BCM_SR_PCIE_PHY) += phy-bcm-sr-pcie.o
obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
obj-$(CONFIG_$(XPL_)PIPE3_PHY) += ti-pipe3-phy.o
obj-$(CONFIG_$(PHASE_)PIPE3_PHY) += ti-pipe3-phy.o
obj-$(CONFIG_AM654_PHY) += phy-ti-am654.o
obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o

4
drivers/phy/cadence/Makefile
View file

@ -1,2 +1,2 @@
obj-$(CONFIG_$(XPL_)PHY_CADENCE_SIERRA) += phy-cadence-sierra.o
obj-$(CONFIG_$(XPL_)PHY_CADENCE_TORRENT) += phy-cadence-torrent.o
obj-$(CONFIG_$(PHASE_)PHY_CADENCE_SIERRA) += phy-cadence-sierra.o
obj-$(CONFIG_$(PHASE_)PHY_CADENCE_TORRENT) += phy-cadence-torrent.o

2
drivers/phy/ti/Makefile
View file

@ -1 +1 @@
obj-$(CONFIG_$(XPL_)PHY_J721E_WIZ) += phy-j721e-wiz.o
obj-$(CONFIG_$(PHASE_)PHY_J721E_WIZ) += phy-j721e-wiz.o

8
drivers/pinctrl/Makefile
View file

@ -1,14 +1,14 @@
# SPDX-License-Identifier: GPL-2.0+
obj-y += pinctrl-uclass.o
obj-$(CONFIG_$(XPL_)PINCTRL_GENERIC) += pinctrl-generic.o
obj-$(CONFIG_$(PHASE_)PINCTRL_GENERIC) += pinctrl-generic.o
obj-$(CONFIG_PINCTRL_ADI) += pinctrl-adi-adsp.o
obj-$(CONFIG_PINCTRL_APPLE) += pinctrl-apple.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o
obj-y += nxp/
obj-$(CONFIG_$(XPL_)PINCTRL_ROCKCHIP) += rockchip/
obj-$(CONFIG_$(PHASE_)PINCTRL_ROCKCHIP) += rockchip/
obj-$(CONFIG_ARCH_ASPEED) += aspeed/
obj-$(CONFIG_ARCH_ATH79) += ath79/
obj-$(CONFIG_PINCTRL_INTEL) += intel/
@ -18,7 +18,7 @@ obj-$(CONFIG_PINCTRL_QCOM) += qcom/
obj-$(CONFIG_ARCH_RENESAS) += renesas/
obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o
obj-$(CONFIG_PINCTRL_SUNXI) += sunxi/
obj-$(CONFIG_$(XPL_)PINCTRL_TEGRA) += tegra/
obj-$(CONFIG_$(PHASE_)PINCTRL_TEGRA) += tegra/
obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/
obj-$(CONFIG_PINCTRL_PIC32) += pinctrl_pic32.o
obj-$(CONFIG_PINCTRL_EXYNOS) += exynos/
@ -32,7 +32,7 @@ obj-$(CONFIG_PINCTRL_QE) += pinctrl-qe-io.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_PINCTRL_STI) += pinctrl-sti.o
obj-$(CONFIG_PINCTRL_STM32) += pinctrl_stm32.o
obj-$(CONFIG_$(XPL_)PINCTRL_STMFX) += pinctrl-stmfx.o
obj-$(CONFIG_$(PHASE_)PINCTRL_STMFX) += pinctrl-stmfx.o
obj-y += broadcom/
obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o
obj-$(CONFIG_PINCTRL_STARFIVE) += starfive/

2
drivers/power/domain/Makefile
View file

@ -3,7 +3,7 @@
# Copyright (c) 2016, NVIDIA CORPORATION.
#
obj-$(CONFIG_$(XPL_)POWER_DOMAIN) += power-domain-uclass.o
obj-$(CONFIG_$(PHASE_)POWER_DOMAIN) += power-domain-uclass.o
obj-$(CONFIG_APPLE_PMGR_POWER_DOMAIN) += apple-pmgr.o
obj-$(CONFIG_BCM6328_POWER_DOMAIN) += bcm6328-power-domain.o
obj-$(CONFIG_IMX8_POWER_DOMAIN) += imx8-power-domain-legacy.o imx8-power-domain.o

30
drivers/power/pmic/Makefile
View file

@ -4,33 +4,33 @@
# Lukasz Majewski <l.majewski@samsung.com>
obj-$(CONFIG_$(PHASE_)DM_PMIC) += pmic-uclass.o
obj-$(CONFIG_$(XPL_)DM_PMIC_FAN53555) += fan53555.o
obj-$(CONFIG_$(XPL_)DM_PMIC_DA9063) += da9063.o
obj-$(CONFIG_$(XPL_)DM_PMIC_MAX77663) += max77663.o
obj-$(CONFIG_$(PHASE_)DM_PMIC_FAN53555) += fan53555.o
obj-$(CONFIG_$(PHASE_)DM_PMIC_DA9063) += da9063.o
obj-$(CONFIG_$(PHASE_)DM_PMIC_MAX77663) += max77663.o
obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
obj-$(CONFIG_$(XPL_)DM_PMIC_BD71837) += bd71837.o
obj-$(CONFIG_$(XPL_)DM_PMIC_MP5416) += mp5416.o
obj-$(CONFIG_$(XPL_)DM_PMIC_PFUZE100) += pfuze100.o
obj-$(CONFIG_$(XPL_)DM_PMIC_PCA9450) += pca9450.o
obj-$(CONFIG_$(PHASE_)DM_PMIC_BD71837) += bd71837.o
obj-$(CONFIG_$(PHASE_)DM_PMIC_MP5416) += mp5416.o
obj-$(CONFIG_$(PHASE_)DM_PMIC_PFUZE100) += pfuze100.o
obj-$(CONFIG_$(PHASE_)DM_PMIC_PCA9450) += pca9450.o
obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
obj-$(CONFIG_PMIC_AB8500) += ab8500.o
obj-$(CONFIG_PMIC_ACT8846) += act8846.o
obj-$(CONFIG_PMIC_AS3722) += as3722.o as3722_gpio.o
obj-$(CONFIG_$(XPL_)PMIC_AXP) += axp.o
obj-$(CONFIG_$(PHASE_)PMIC_AXP) += axp.o
obj-$(CONFIG_PMIC_MAX8997) += max8997.o
obj-$(CONFIG_PMIC_QCOM) += pmic_qcom.o
obj-$(CONFIG_$(PHASE_)PMIC_RK8XX) += rk8xx.o
obj-$(CONFIG_$(XPL_)PMIC_RN5T567) += rn5t567.o
obj-$(CONFIG_$(PHASE_)PMIC_RN5T567) += rn5t567.o
obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
obj-$(CONFIG_$(XPL_)DM_PMIC_TPS80031) += tps80031.o
obj-$(CONFIG_$(XPL_)PMIC_PALMAS) += palmas.o
obj-$(CONFIG_$(XPL_)PMIC_LP873X) += lp873x.o
obj-$(CONFIG_$(XPL_)PMIC_LP87565) += lp87565.o
obj-$(CONFIG_$(PHASE_)DM_PMIC_TPS80031) += tps80031.o
obj-$(CONFIG_$(PHASE_)PMIC_PALMAS) += palmas.o
obj-$(CONFIG_$(PHASE_)PMIC_LP873X) += lp873x.o
obj-$(CONFIG_$(PHASE_)PMIC_LP87565) += lp87565.o
obj-$(CONFIG_PMIC_STPMIC1) += stpmic1.o
obj-$(CONFIG_PMIC_TPS65217) += pmic_tps65217.o
obj-$(CONFIG_PMIC_TPS65219) += tps65219.o
@ -38,7 +38,7 @@ obj-$(CONFIG_PMIC_TPS65941) += tps65941.o
obj-$(CONFIG_PMIC_RAA215300) += raa215300.o
obj-$(CONFIG_POWER_TPS65218) += pmic_tps65218.o
ifeq ($(CONFIG_$(XPL_)POWER_LEGACY),y)
ifeq ($(CONFIG_$(PHASE_)POWER_LEGACY),y)
obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
obj-$(CONFIG_POWER_PCA9450) += pmic_pca9450.o
obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
@ -47,5 +47,5 @@ obj-$(CONFIG_POWER_HI6553) += pmic_hi6553.o
obj-$(CONFIG_POWER_MC34VR500) += pmic_mc34vr500.o
endif
obj-$(CONFIG_$(XPL_)POWER_TPS62362) += pmic_tps62362.o
obj-$(CONFIG_$(PHASE_)POWER_TPS62362) += pmic_tps62362.o
obj-$(CONFIG_SPL_POWER_TPS65910) += pmic_tps65910.o

46
drivers/power/regulator/Makefile
View file

@ -4,42 +4,42 @@
# Przemyslaw Marczak <p.marczak@samsung.com>
#
obj-$(CONFIG_$(XPL_)DM_REGULATOR) += regulator-uclass.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR) += regulator-uclass.o
obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722_regulator.o
obj-$(CONFIG_$(XPL_)REGULATOR_AXP) += axp_regulator.o
obj-$(CONFIG_$(XPL_)REGULATOR_AXP_USB_POWER) += axp_usb_power.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_DA9063) += da9063.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_MAX77663) += max77663_regulator.o
obj-$(CONFIG_$(PHASE_)REGULATOR_AXP) += axp_regulator.o
obj-$(CONFIG_$(PHASE_)REGULATOR_AXP_USB_POWER) += axp_usb_power.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_DA9063) += da9063.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_MAX77663) += max77663_regulator.o
obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_DM_REGULATOR_NPCM8XX) += npcm8xx_regulator.o
obj-$(CONFIG_$(XPL_)DM_PMIC_PFUZE100) += pfuze100.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_BD71837) += bd71837.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_PCA9450) += pca9450.o
obj-$(CONFIG_$(XPL_)REGULATOR_PWM) += pwm_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_COMMON) += regulator_common.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_FIXED) += fixed.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_$(PHASE_)DM_PMIC_PFUZE100) += pfuze100.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_BD71837) += bd71837.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_PCA9450) += pca9450.o
obj-$(CONFIG_$(PHASE_)REGULATOR_PWM) += pwm_regulator.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_COMMON) += regulator_common.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_FIXED) += fixed.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_DM_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_$(PHASE_)REGULATOR_RK8XX) += rk8xx.o
obj-$(CONFIG_DM_REGULATOR_S2MPS11) += s2mps11_regulator.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
obj-$(CONFIG_DM_REGULATOR_SANDBOX) += sandbox.o
obj-$(CONFIG_REGULATOR_TPS65090) += tps65090_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_PALMAS) += palmas_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_PBIAS) += pbias_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_LP873X) += lp873x_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_PALMAS) += palmas_regulator.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_PBIAS) += pbias_regulator.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_LP873X) += lp873x_regulator.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_LP87565) += lp87565_regulator.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_TPS65911) += tps65911_regulator.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_TPS65911) += tps65911_regulator.o
obj-$(CONFIG_DM_REGULATOR_TPS62360) += tps62360_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_TPS6287X) += tps6287x_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_TPS80031) += tps80031_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_TPS6287X) += tps6287x_regulator.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_TPS80031) += tps80031_regulator.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_STPMIC1) += stpmic1.o
obj-$(CONFIG_DM_REGULATOR_TPS65941) += tps65941_regulator.o
obj-$(CONFIG_DM_REGULATOR_SCMI) += scmi_regulator.o
obj-$(CONFIG_$(XPL_)DM_REGULATOR_ANATOP) += anatop_regulator.o
obj-$(CONFIG_$(PHASE_)DM_REGULATOR_ANATOP) += anatop_regulator.o
obj-$(CONFIG_DM_REGULATOR_TPS65219) += tps65219_regulator.o
obj-$(CONFIG_REGULATOR_RZG2L_USBPHY) += rzg2l-usbphy-regulator.o

2
drivers/remoteproc/Makefile
View file

@ -4,7 +4,7 @@
# Texas Instruments Incorporated - https://www.ti.com/
#
obj-$(CONFIG_$(XPL_)REMOTEPROC) += rproc-uclass.o rproc-elf-loader.o
obj-$(CONFIG_$(PHASE_)REMOTEPROC) += rproc-uclass.o rproc-elf-loader.o
# Remote proc drivers - Please keep this list alphabetically sorted.
obj-$(CONFIG_K3_SYSTEM_CONTROLLER) += k3_system_controller.o

2
drivers/serial/Makefile
View file

@ -11,7 +11,7 @@ endif
obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o
obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
obj-$(CONFIG_$(XPL_)SYS_NS16550_SERIAL) += serial_ns16550.o
obj-$(CONFIG_$(PHASE_)SYS_NS16550_SERIAL) += serial_ns16550.o
obj-$(CONFIG_ALTERA_UART) += altera_uart.o
obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o

8
drivers/timer/Makefile
View file

@ -5,14 +5,14 @@
obj-y += timer-uclass.o
obj-$(CONFIG_ADI_SC5XX_TIMER) += adi_sc5xx_timer.o
obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o
obj-$(CONFIG_$(XPL_)ANDES_PLMT_TIMER) += andes_plmt_timer.o
obj-$(CONFIG_$(PHASE_)ANDES_PLMT_TIMER) += andes_plmt_timer.o
obj-$(CONFIG_ARC_TIMER) += arc_timer.o
obj-$(CONFIG_ARM_TWD_TIMER) += arm_twd_timer.o
obj-$(CONFIG_AST_TIMER) += ast_timer.o
obj-$(CONFIG_AST_IBEX_TIMER) += ast_ibex_timer.o
obj-$(CONFIG_ATCPIT100_TIMER) += atcpit100_timer.o
obj-$(CONFIG_$(XPL_)ATMEL_PIT_TIMER) += atmel_pit_timer.o
obj-$(CONFIG_$(XPL_)ATMEL_TCB_TIMER) += atmel_tcb_timer.o
obj-$(CONFIG_$(PHASE_)ATMEL_PIT_TIMER) += atmel_pit_timer.o
obj-$(CONFIG_$(PHASE_)ATMEL_TCB_TIMER) += atmel_tcb_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence-ttc.o
obj-$(CONFIG_DESIGNWARE_APB_TIMER) += dw-apb-timer.o
obj-$(CONFIG_FTTMR010_TIMER) += fttmr010_timer.o
@ -27,7 +27,7 @@ obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o
obj-$(CONFIG_SP804_TIMER) += sp804_timer.o
obj-$(CONFIG_$(XPL_)RISCV_ACLINT) += riscv_aclint_timer.o
obj-$(CONFIG_$(PHASE_)RISCV_ACLINT) += riscv_aclint_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
obj-$(CONFIG_STM32_TIMER) += stm32_timer.o
obj-$(CONFIG_TEGRA_TIMER) += tegra-timer.o

4
drivers/usb/cdns3/Makefile
View file

@ -4,9 +4,9 @@ cdns3-y := core.o drd.o
obj-$(CONFIG_USB_CDNS3) += cdns3.o
cdns3-$(CONFIG_$(XPL_)USB_CDNS3_GADGET) += gadget.o ep0.o
cdns3-$(CONFIG_$(PHASE_)USB_CDNS3_GADGET) += gadget.o ep0.o
cdns3-$(CONFIG_$(XPL_)USB_CDNS3_HOST) += host.o
cdns3-$(CONFIG_$(PHASE_)USB_CDNS3_HOST) += host.o
obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o

2
drivers/usb/common/Makefile
View file

@ -3,7 +3,7 @@
# (C) Copyright 2016 Freescale Semiconductor, Inc.
#
obj-$(CONFIG_$(XPL_)DM_USB) += common.o
obj-$(CONFIG_$(PHASE_)DM_USB) += common.o
obj-$(CONFIG_USB_ISP1760) += usb_urb.o
obj-$(CONFIG_USB_MUSB_HOST) += usb_urb.o
obj-$(CONFIG_USB_MUSB_GADGET) += usb_urb.o

4
drivers/usb/dwc3/Makefile
View file

@ -6,11 +6,11 @@ dwc3-y := core.o
obj-$(CONFIG_USB_DWC3_GADGET) += gadget.o ep0.o
obj-$(CONFIG_$(XPL_)USB_DWC3_AM62) += dwc3-am62.o
obj-$(CONFIG_$(PHASE_)USB_DWC3_AM62) += dwc3-am62.o
obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o
obj-$(CONFIG_USB_DWC3_MESON_GXL) += dwc3-meson-gxl.o
obj-$(CONFIG_$(XPL_)USB_DWC3_GENERIC) += dwc3-generic.o
obj-$(CONFIG_$(PHASE_)USB_DWC3_GENERIC) += dwc3-generic.o
obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o
obj-$(CONFIG_USB_DWC3_LAYERSCAPE) += dwc3-layerscape.o
obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o

4
drivers/usb/gadget/udc/Makefile
View file

@ -2,9 +2,9 @@
#
# USB peripheral controller drivers
ifndef CONFIG_$(XPL_)DM_USB_GADGET
ifndef CONFIG_$(PHASE_)DM_USB_GADGET
obj-$(CONFIG_USB_DWC3_GADGET) += udc-core.o
endif
obj-$(CONFIG_$(XPL_)DM_USB_GADGET) += udc-core.o
obj-$(CONFIG_$(PHASE_)DM_USB_GADGET) += udc-core.o
obj-y += udc-uclass.o

2
drivers/usb/host/Makefile
View file

@ -3,7 +3,7 @@
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
ifdef CONFIG_$(XPL_)DM_USB
ifdef CONFIG_$(PHASE_)DM_USB
obj-y += usb-uclass.o
obj-$(CONFIG_SANDBOX) += usb-sandbox.o
endif

2
drivers/video/Makefile
View file

@ -35,7 +35,7 @@ obj-${CONFIG_EXYNOS_FB} += exynos/
obj-${CONFIG_VIDEO_ROCKCHIP} += rockchip/
obj-${CONFIG_VIDEO_STM32} += stm32/
obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
obj-${CONFIG_$(XPL_)VIDEO_TIDSS} += tidss/
obj-${CONFIG_$(PHASE_)VIDEO_TIDSS} += tidss/
obj-y += ti/
obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o

2
drivers/video/tidss/Makefile
View file

@ -9,4 +9,4 @@
# Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
obj-${CONFIG_$(XPL_)VIDEO_TIDSS} = tidss_drv.o
obj-${CONFIG_$(PHASE_)VIDEO_TIDSS} = tidss_drv.o

4
fs/fat/Makefile
View file

@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_$(XPL_)FS_FAT) = fat.o
obj-$(CONFIG_$(XPL_)FAT_WRITE) = fat_write.o
obj-$(CONFIG_$(PHASE_)FS_FAT) = fat.o
obj-$(CONFIG_$(PHASE_)FAT_WRITE) = fat_write.o

2
fs/squashfs/Makefile
View file

@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_$(XPL_)FS_SQUASHFS) = sqfs.o \
obj-$(CONFIG_$(PHASE_)FS_SQUASHFS) = sqfs.o \
sqfs_inode.o \
sqfs_dir.o \
sqfs_decompressor.o

10
lib/Makefile
View file

@ -71,7 +71,7 @@ obj-y += crypto/
obj-$(CONFIG_$(PHASE_)ACPI) += acpi/
obj-$(CONFIG_ECDSA) += ecdsa/
obj-$(CONFIG_$(XPL_)RSA) += rsa/
obj-$(CONFIG_$(PHASE_)RSA) += rsa/
obj-$(CONFIG_HASH) += hash-checksum.o
obj-$(CONFIG_BLAKE2) += blake2/blake2b.o
@ -82,7 +82,7 @@ obj-$(CONFIG_$(PHASE_)SHA256_LEGACY) += sha256.o
obj-$(CONFIG_$(PHASE_)SHA512_LEGACY) += sha512.o
obj-$(CONFIG_CRYPT_PW) += crypt/
obj-$(CONFIG_$(XPL_)ASN1_DECODER_LEGACY) += asn1_decoder.o
obj-$(CONFIG_$(PHASE_)ASN1_DECODER_LEGACY) += asn1_decoder.o
obj-$(CONFIG_$(PHASE_)ZLIB) += zlib/
obj-$(CONFIG_$(PHASE_)ZSTD) += zstd/
@ -91,14 +91,14 @@ obj-$(CONFIG_$(PHASE_)LZO) += lzo/
obj-$(CONFIG_$(PHASE_)LZMA) += lzma/
obj-$(CONFIG_$(PHASE_)LZ4) += lz4_wrapper.o
obj-$(CONFIG_$(XPL_)LIB_RATIONAL) += rational.o
obj-$(CONFIG_$(PHASE_)LIB_RATIONAL) += rational.o
obj-$(CONFIG_LIBAVB) += libavb/
obj-$(CONFIG_$(PHASE_)OF_LIBFDT) += libfdt/
obj-$(CONFIG_$(PHASE_)OF_REAL) += fdtdec_common.o fdtdec.o
obj-$(CONFIG_$(XPL_)MBEDTLS_LIB) += mbedtls/
obj-$(CONFIG_$(PHASE_)MBEDTLS_LIB) += mbedtls/
obj-$(CONFIG_NET_LWIP) += lwip/
@ -150,7 +150,7 @@ else
obj-y += vsprintf.o strto.o
obj-$(CONFIG_SSCANF) += sscanf.o
endif
obj-$(CONFIG_$(XPL_)OID_REGISTRY) += oid_registry.o
obj-$(CONFIG_$(PHASE_)OID_REGISTRY) += oid_registry.o
obj-y += abuf.o
obj-y += alist.o

8
lib/acpi/Makefile
View file

@ -5,10 +5,10 @@ obj-y += acpi.o
ifdef CONFIG_$(PHASE_)GENERATE_ACPI_TABLE
obj-$(CONFIG_$(XPL_)ACPIGEN) += acpigen.o
obj-$(CONFIG_$(XPL_)ACPIGEN) += acpi_device.o
obj-$(CONFIG_$(XPL_)ACPIGEN) += acpi_dp.o
obj-$(CONFIG_$(XPL_)ACPIGEN) += acpi_table.o
obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpigen.o
obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi_device.o
obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi_dp.o
obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi_table.o
obj-y += acpi_writer.o
# With QEMU the ACPI tables come from there, not from U-Boot

2
lib/aes/Makefile
View file

@ -2,4 +2,4 @@
#
# Copyright (c) 2019, Softathome
obj-$(CONFIG_$(XPL_)FIT_CIPHER) += aes-decrypt.o
obj-$(CONFIG_$(PHASE_)FIT_CIPHER) += aes-decrypt.o

20
lib/crypto/Makefile
View file

@ -3,17 +3,17 @@
# Makefile for asymmetric cryptographic keys
#
obj-$(CONFIG_$(XPL_)ASYMMETRIC_KEY_TYPE) += asymmetric_keys.o
obj-$(CONFIG_$(PHASE_)ASYMMETRIC_KEY_TYPE) += asymmetric_keys.o
asymmetric_keys-y := asymmetric_type.o
obj-$(CONFIG_$(XPL_)ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key_helper.o
obj-$(CONFIG_$(XPL_)ASYMMETRIC_PUBLIC_KEY_LEGACY) += public_key.o
obj-$(CONFIG_$(PHASE_)ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key_helper.o
obj-$(CONFIG_$(PHASE_)ASYMMETRIC_PUBLIC_KEY_LEGACY) += public_key.o
#
# RSA public key parser
#
obj-$(CONFIG_$(XPL_)RSA_PUBLIC_KEY_PARSER_LEGACY) += rsa_public_key.o
obj-$(CONFIG_$(PHASE_)RSA_PUBLIC_KEY_PARSER_LEGACY) += rsa_public_key.o
rsa_public_key-y := \
rsapubkey.asn1.o \
rsa_helper.o
@ -31,9 +31,9 @@ endif
#
# X.509 Certificate handling
#
obj-$(CONFIG_$(XPL_)X509_CERTIFICATE_PARSER) += x509_key_parser.o
obj-$(CONFIG_$(PHASE_)X509_CERTIFICATE_PARSER) += x509_key_parser.o
x509_key_parser-y := x509_helper.o
x509_key_parser-$(CONFIG_$(XPL_)X509_CERTIFICATE_PARSER_LEGACY) += \
x509_key_parser-$(CONFIG_$(PHASE_)X509_CERTIFICATE_PARSER_LEGACY) += \
x509.asn1.o \
x509_akid.asn1.o \
x509_cert_parser.o \
@ -49,21 +49,21 @@ $(obj)/x509_akid.asn1.o: $(obj)/x509_akid.asn1.c $(obj)/x509_akid.asn1.h
#
# PKCS#7 message handling
#
obj-$(CONFIG_$(XPL_)PKCS7_MESSAGE_PARSER) += pkcs7_message.o
obj-$(CONFIG_$(PHASE_)PKCS7_MESSAGE_PARSER) += pkcs7_message.o
pkcs7_message-y := pkcs7_helper.o
pkcs7_message-$(CONFIG_$(SPL_)PKCS7_MESSAGE_PARSER_LEGACY) += \
pkcs7_message-$(CONFIG_$(PHASE_)PKCS7_MESSAGE_PARSER_LEGACY) += \
pkcs7.asn1.o \
pkcs7_parser.o
$(obj)/pkcs7_parser.o: $(obj)/pkcs7.asn1.h
$(obj)/pkcs7.asn1.o: $(obj)/pkcs7.asn1.c $(obj)/pkcs7.asn1.h
obj-$(CONFIG_$(XPL_)PKCS7_VERIFY) += pkcs7_verify.o
obj-$(CONFIG_$(PHASE_)PKCS7_VERIFY) += pkcs7_verify.o
#
# Signed PE binary-wrapped key handling
#
obj-$(CONFIG_$(XPL_)MSCODE_PARSER_LEGACY) += mscode.o
obj-$(CONFIG_$(PHASE_)MSCODE_PARSER_LEGACY) += mscode.o
mscode-y := \
mscode_parser.o \

2
lib/ecdsa/Makefile
View file

@ -1 +1 @@
obj-$(CONFIG_$(XPL_)ECDSA_VERIFY) += ecdsa-verify.o
obj-$(CONFIG_$(PHASE_)ECDSA_VERIFY) += ecdsa-verify.o

2
lib/lwip/Makefile
View file

@ -54,5 +54,5 @@ obj-y += \
lwip/src/core/udp.o \
lwip/src/netif/ethernet.o
obj-$(CONFIG_$(XPL_)MBEDTLS_LIB_TLS) += lwip/src/apps/altcp_tls/altcp_tls_mbedtls.o \
obj-$(CONFIG_$(PHASE_)MBEDTLS_LIB_TLS) += lwip/src/apps/altcp_tls/altcp_tls_mbedtls.o \
lwip/src/apps/altcp_tls/altcp_tls_mbedtls_mem.o

38
lib/mbedtls/Makefile
View file

@ -6,19 +6,19 @@
MBEDTLS_LIB_DIR = external/mbedtls/library
# shim layer for hash
obj-$(CONFIG_$(XPL_)MD5_MBEDTLS) += md5.o
obj-$(CONFIG_$(XPL_)SHA1_MBEDTLS) += sha1.o
obj-$(CONFIG_$(XPL_)SHA256_MBEDTLS) += sha256.o
obj-$(CONFIG_$(XPL_)SHA512_MBEDTLS) += sha512.o
obj-$(CONFIG_$(PHASE_)MD5_MBEDTLS) += md5.o
obj-$(CONFIG_$(PHASE_)SHA1_MBEDTLS) += sha1.o
obj-$(CONFIG_$(PHASE_)SHA256_MBEDTLS) += sha256.o
obj-$(CONFIG_$(PHASE_)SHA512_MBEDTLS) += sha512.o
# x509 libraries
obj-$(CONFIG_$(XPL_)ASYMMETRIC_PUBLIC_KEY_MBEDTLS) += \
obj-$(CONFIG_$(PHASE_)ASYMMETRIC_PUBLIC_KEY_MBEDTLS) += \
public_key.o
obj-$(CONFIG_$(XPL_)X509_CERTIFICATE_PARSER_MBEDTLS) += \
obj-$(CONFIG_$(PHASE_)X509_CERTIFICATE_PARSER_MBEDTLS) += \
x509_cert_parser.o
obj-$(CONFIG_$(XPL_)PKCS7_MESSAGE_PARSER_MBEDTLS) += pkcs7_parser.o
obj-$(CONFIG_$(XPL_)MSCODE_PARSER_MBEDTLS) += mscode_parser.o
obj-$(CONFIG_$(XPL_)RSA_PUBLIC_KEY_PARSER_MBEDTLS) += rsa_helper.o
obj-$(CONFIG_$(PHASE_)PKCS7_MESSAGE_PARSER_MBEDTLS) += pkcs7_parser.o
obj-$(CONFIG_$(PHASE_)MSCODE_PARSER_MBEDTLS) += mscode_parser.o
obj-$(CONFIG_$(PHASE_)RSA_PUBLIC_KEY_PARSER_MBEDTLS) += rsa_helper.o
# MbedTLS crypto library
obj-$(CONFIG_$(XPL_)MBEDTLS_LIB) += mbedtls_lib_crypto.o
@ -27,35 +27,35 @@ mbedtls_lib_crypto-y := \
$(MBEDTLS_LIB_DIR)/constant_time.o \
$(MBEDTLS_LIB_DIR)/md.o
mbedtls_lib_crypto-$(CONFIG_$(XPL_)MD5_MBEDTLS) += $(MBEDTLS_LIB_DIR)/md5.o
mbedtls_lib_crypto-$(CONFIG_$(XPL_)SHA1_MBEDTLS) += $(MBEDTLS_LIB_DIR)/sha1.o
mbedtls_lib_crypto-$(CONFIG_$(XPL_)SHA256_MBEDTLS) += \
mbedtls_lib_crypto-$(CONFIG_$(PHASE_)MD5_MBEDTLS) += $(MBEDTLS_LIB_DIR)/md5.o
mbedtls_lib_crypto-$(CONFIG_$(PHASE_)SHA1_MBEDTLS) += $(MBEDTLS_LIB_DIR)/sha1.o
mbedtls_lib_crypto-$(CONFIG_$(PHASE_)SHA256_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/sha256.o
mbedtls_lib_crypto-$(CONFIG_$(XPL_)SHA512_MBEDTLS) += \
mbedtls_lib_crypto-$(CONFIG_$(PHASE_)SHA512_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/sha512.o
mbedtls_lib_crypto-$(CONFIG_$(XPL_)HKDF_MBEDTLS) += \
mbedtls_lib_crypto-$(CONFIG_$(PHASE_)HKDF_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/hkdf.o
# MbedTLS X509 library
obj-$(CONFIG_$(XPL_)MBEDTLS_LIB_X509) += mbedtls_lib_x509.o
mbedtls_lib_x509-y := $(MBEDTLS_LIB_DIR)/x509.o
mbedtls_lib_x509-$(CONFIG_$(XPL_)ASN1_DECODER_MBEDTLS) += \
mbedtls_lib_x509-$(CONFIG_$(PHASE_)ASN1_DECODER_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/asn1parse.o \
$(MBEDTLS_LIB_DIR)/asn1write.o \
$(MBEDTLS_LIB_DIR)/oid.o
mbedtls_lib_x509-$(CONFIG_$(XPL_)RSA_PUBLIC_KEY_PARSER_MBEDTLS) += \
mbedtls_lib_x509-$(CONFIG_$(PHASE_)RSA_PUBLIC_KEY_PARSER_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/bignum.o \
$(MBEDTLS_LIB_DIR)/bignum_core.o \
$(MBEDTLS_LIB_DIR)/rsa.o \
$(MBEDTLS_LIB_DIR)/rsa_alt_helpers.o
mbedtls_lib_x509-$(CONFIG_$(XPL_)ASYMMETRIC_PUBLIC_KEY_MBEDTLS) += \
mbedtls_lib_x509-$(CONFIG_$(PHASE_)ASYMMETRIC_PUBLIC_KEY_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/pk.o \
$(MBEDTLS_LIB_DIR)/pk_wrap.o \
$(MBEDTLS_LIB_DIR)/pkparse.o
mbedtls_lib_x509-$(CONFIG_$(XPL_)X509_CERTIFICATE_PARSER_MBEDTLS) += \
mbedtls_lib_x509-$(CONFIG_$(PHASE_)X509_CERTIFICATE_PARSER_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/x509_crl.o \
$(MBEDTLS_LIB_DIR)/x509_crt.o
mbedtls_lib_x509-$(CONFIG_$(XPL_)PKCS7_MESSAGE_PARSER_MBEDTLS) += \
mbedtls_lib_x509-$(CONFIG_$(PHASE_)PKCS7_MESSAGE_PARSER_MBEDTLS) += \
$(MBEDTLS_LIB_DIR)/pkcs7.o
#mbedTLS TLS support

6
net/Makefile
View file

@ -14,7 +14,7 @@ obj-$(CONFIG_CMD_DNS) += dns.o
obj-$(CONFIG_DM_DSA) += dsa-uclass.o
obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o
obj-$(CONFIG_IPV6) += ndisc.o
obj-$(CONFIG_$(XPL_)DM_ETH) += net.o
obj-$(CONFIG_$(PHASE_)DM_ETH) += net.o
obj-$(CONFIG_IPV6) += net6.o
obj-$(CONFIG_CMD_NFS) += nfs.o
obj-$(CONFIG_CMD_PING) += ping.o
@ -39,11 +39,11 @@ CFLAGS_eth_common.o += -Wno-format-extra-args
endif
ifeq ($(filter y,$(CONFIG_NET) $(CONFIG_NET_LWIP)),y)
obj-$(CONFIG_$(XPL_)DM_ETH) += eth-uclass.o
obj-$(CONFIG_$(PHASE_)DM_ETH) += eth-uclass.o
obj-$(CONFIG_$(PHASE_)BOOTDEV_ETH) += eth_bootdev.o
obj-$(CONFIG_DM_MDIO) += mdio-uclass.o
obj-$(CONFIG_DM_MDIO_MUX) += mdio-mux-uclass.o
obj-$(CONFIG_$(XPL_)DM_ETH) += eth_common.o
obj-$(CONFIG_$(PHASE_)DM_ETH) += eth_common.o
obj-y += net-common.o
endif

2
net/lwip/Makefile
View file

@ -1,6 +1,6 @@
ccflags-y += -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot
obj-$(CONFIG_$(SPL_)DM_ETH) += net-lwip.o
obj-$(CONFIG_$(PHASE_)DM_ETH) += net-lwip.o
obj-$(CONFIG_CMD_DHCP) += dhcp.o
obj-$(CONFIG_CMD_DNS) += dns.o
obj-$(CONFIG_CMD_PING) += ping.o

12
scripts/Kbuild.include
View file

@ -324,18 +324,16 @@ endif
# do not delete intermediate files automatically
.SECONDARY:
ifdef CONFIG_XPL_BUILD
XPL_ := SPL_
ifeq ($(CONFIG_SPL_BUILD),y)
PHASE_ := SPL_
else
ifeq ($(CONFIG_VPL_BUILD),y)
PHASE_ := VPL_
else
ifeq ($(CONFIG_TPL_BUILD),y)
PHASE_ := TPL_
else
PHASE_ := SPL_
endif
endif
else
XPL_ :=
PHASE_ :=
endif
endif
endif

12
scripts/Makefile.xpl
View file

@ -58,21 +58,19 @@ endif
export SPL_NAME
ifdef CONFIG_XPL_BUILD
XPL_ := SPL_
ifeq ($(CONFIG_SPL_BUILD),y)
PHASE_ := SPL_
else
ifeq ($(CONFIG_VPL_BUILD),y)
PHASE_ := VPL_
else
ifeq ($(CONFIG_TPL_BUILD),y)
PHASE_ := TPL_
else
PHASE_ := SPL_
endif
endif
else
XPL_ :=
PHASE_ :=
endif
endif
endif
ifeq ($(obj)$(CONFIG_SUPPORT_SPL),spl)
$(error You cannot build SPL without enabling CONFIG_SUPPORT_SPL)

6
test/Makefile
View file

@ -4,15 +4,15 @@
obj-y += test-main.o
obj-$(CONFIG_$(XPL_)CMDLINE) += cmd/
obj-$(CONFIG_$(XPL_)CMDLINE) += cmd_ut.o
obj-$(CONFIG_$(PHASE_)CMDLINE) += cmd/
obj-$(CONFIG_$(PHASE_)CMDLINE) += cmd_ut.o
obj-y += dm/
obj-$(CONFIG_FUZZ) += fuzz/
ifndef CONFIG_SANDBOX_VPL
obj-$(CONFIG_UNIT_TEST) += lib/
endif
ifneq ($(CONFIG_HUSH_PARSER),)
obj-$(CONFIG_$(XPL_)CMDLINE) += hush/
obj-$(CONFIG_$(PHASE_)CMDLINE) += hush/
endif
obj-$(CONFIG_UT_OPTEE) += optee/
obj-y += ut.o

2
test/boot/Makefile
View file

@ -11,7 +11,7 @@ obj-$(CONFIG_CEDIT) += cedit.o
endif
ifdef CONFIG_SANDBOX
obj-$(CONFIG_$(XPL_)CMDLINE) += bootm.o
obj-$(CONFIG_$(PHASE_)CMDLINE) += bootm.o
endif
obj-$(CONFIG_MEASURED_BOOT) += measurement.o

2
test/cmd/Makefile
View file

@ -3,7 +3,7 @@
# Copyright (c) 2013 Google, Inc
# Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office@arm.com>
obj-$(CONFIG_$(XPL_)CMDLINE) += command.o
obj-$(CONFIG_$(PHASE_)CMDLINE) += command.o
ifdef CONFIG_HUSH_PARSER
obj-$(CONFIG_CONSOLE_RECORD) += test_echo.o
endif

6
test/common/Makefile
View file

@ -1,13 +1,13 @@
# SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_AUTOBOOT) += test_autoboot.o
ifneq ($(CONFIG_$(XPL_)BLOBLIST),)
ifneq ($(CONFIG_$(PHASE_)BLOBLIST),)
ifdef CONFIG_BLOBLIST_FIXED
obj-$(CONFIG_$(XPL_)CMDLINE) += bloblist.o
obj-$(CONFIG_$(PHASE_)CMDLINE) += bloblist.o
endif
endif
obj-$(CONFIG_CYCLIC) += cyclic.o
obj-$(CONFIG_EVENT_DYNAMIC) += event.o
obj-y += cread.o
obj-$(CONFIG_$(XPL_)CMDLINE) += print.o
obj-$(CONFIG_$(PHASE_)CMDLINE) += print.o

2
test/fuzz/Makefile
View file

@ -4,5 +4,5 @@
# Written by Andrew Scull <ascull@google.com>
#
obj-$(CONFIG_$(XPL_)CMDLINE) += cmd_fuzz.o
obj-$(CONFIG_$(PHASE_)CMDLINE) += cmd_fuzz.o
obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o

4
test/lib/Makefile
View file

@ -3,7 +3,7 @@
# (C) Copyright 2018
# Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
obj-$(CONFIG_$(XPL_)UT_COMPRESSION) += compression.o
obj-$(CONFIG_$(PHASE_)UT_COMPRESSION) += compression.o
ifeq ($(CONFIG_XPL_BUILD),)
obj-y += abuf.o
@ -29,7 +29,7 @@ obj-$(CONFIG_GETOPT) += getopt.o
obj-$(CONFIG_CRC8) += test_crc8.o
obj-$(CONFIG_UT_LIB_CRYPT) += test_crypt.o
obj-$(CONFIG_UT_TIME) += time.o
obj-$(CONFIG_$(XPL_)UT_UNICODE) += unicode.o
obj-$(CONFIG_$(PHASE_)UT_UNICODE) += unicode.o
obj-$(CONFIG_LIB_UUID) += uuid.o
else
obj-$(CONFIG_SANDBOX) += kconfig_spl.o

8
tools/qconfig.py
View file

@ -1175,7 +1175,7 @@ def prefix_config(cfg):
return oper + cfg
RE_MK_CONFIGS = re.compile(r'CONFIG_(\$\(XPL_\)|\$\(PHASE_\))?([A-Za-z0-9_]*)')
RE_MK_CONFIGS = re.compile(r'CONFIG_(\$\(PHASE_\))?([A-Za-z0-9_]*)')
RE_IFDEF = re.compile(r'(ifdef|ifndef)')
RE_C_CONFIGS = re.compile(r'CONFIG_([A-Za-z0-9_]*)')
RE_CONFIG_IS = re.compile(r'CONFIG_IS_ENABLED\(([A-Za-z0-9_]*)\)')
@ -1220,8 +1220,6 @@ def scan_makefiles(fnames):
>>> RE_MK_CONFIGS.search('CONFIG_FRED').groups()
(None, 'FRED')
>>> RE_MK_CONFIGS.search('CONFIG_$(XPL_)MARY').groups()
('$(XPL_)', 'MARY')
>>> RE_MK_CONFIGS.search('CONFIG_$(PHASE_)MARY').groups()
('$(PHASE_)', 'MARY')
"""
@ -1321,8 +1319,8 @@ def do_scan_source(path, do_update):
spl_mode (int): If MODE_SPL, look at source code which implies
an xPL_ option, but for which there is none;
for MOD_PROPER, look at source code which implies a Proper
option (i.e. use of CONFIG_IS_ENABLED() or $(XPL_) or
$(PHASE_) but for which there none;
option (i.e. use of CONFIG_IS_ENABLED() or $(PHASE_) but for
which there none;
if MODE_NORMAL, ignore SPL
Returns: