Update the 'plat_get_my_entrypoint' assembly routine to
differentiate between cold reset, warm reset and SMP
secondary boot cores request.
Add secondary core boot request markup in BL31.
Perform CACHE flush/clean ops in case of warm reset request also.
Change-Id: I7d33e362a3a513c60c8333e062ce832aa7facf38
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Fix CCU settings for cache maintenance.
Change-Id: I9af35a6ab7aa9ee20e05ba82d0a042948ac29a93
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This fix is to flush and invalidate the caches before cold reset.
Issue happen where Agilex5 hardware does not support the caches flush.
Thus software workaround is needed.
Change-Id: Ibfeecbc611d238a069ca72f8b833f319e794cd38
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
memcpy does not check the dst_size which may
create vulnerable issue as it can overflow the buffer.
Using memcpy_s which check the dst_size will help to
reduce the risk. Also, this memcpy is always 4 bytes
each time.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I413e6ae2ee9330501703c4cd63b7943c6f55b4c7
Boot scratch cold 8 register is fully used by n5x.
Update to use boot scratch cold 8 bit 19 register for cpu0 ON/OFF
indicator.
Change-Id: I45ebfdcc17c47bcce69f5f611e677ac7838ecf52
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This patch is used to implement
1. Cold/Warm reset and SMP support for
Agilex5 SoC FPGA
2. Updated product name -> Agilex5
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I2c0645bcbf3a5907a4c79f35cffe674920b48f9d
This patch is to restructure system manager. Move platform dependent
MACROs to individual platform system manager. Common system manager will
remain for those common declaration only.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I2f52d3eaf47716f7dfc636bbf1a23d68a04f39cb
There is a use case where kernel requested ATF to power off/on only CPU0.
However, after ATF power off/on CPU0, CPU0 did not back into the state
to wait for ATF. Instead, CPU0 continue to reentry SPL boot sequence
because CPU0 is master/primary core. This causing the system reboot from
SPL again, while the slave core still in kernel.
To resolve this, ATF is set the boot scratch register 8 bit 17 whenever
it is a request from kernel to power off/on only CPU0. So, if this boot
scratch bit is set, CPU 0 will be able to put into a state to wait for
ATF.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Ia0228c5396beaa479858f5bd02fc05139efd2423
SError and Abort are handled in Linux (EL1) instead of
EL3. This patch adds some functionality that complements the
use cases by Linux as follows:
- Provide SMC for ECC DBE notification to EL3
- Determine type of reset needed and service the request in
place of Linux
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I43d02c77f28004a31770be53599a5a42de412211
This patch comes as fixes for 'intel: Fix Coverity Scan Defects' patch.
Revert changing argument type from uint32_t to uint64_t to fix
incompatible cast issue. Fix said bug by using intermediate uint32_t
array as a more appropriate solution.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I344cdabd432cf0a0389b225c934b35d12f4c631d
Fix mailbox driver incompatible cast bug and control flow issue that
was flagged by Coverity Scan.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3f34e98d24e40139d31cf7d5b9b973cd2d981065
Introduce support for RSU that can be initiated through SMC calls.
Added features as below:
- RSU status
- RSU update
- RSU HPS notify
- RSU get sub-partition
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I78d5a07688e43da99f03d77dfd45ffb4a78f2e4c
Refactor reset manager into intel common platform directory as it can be
shared by both Stratix 10 and Agilex. Register address and field is now
referred through macros.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Id6d50f2a2f5a6bd8d6746b84602ac17ec7f6c07a
Add support for platform specific warm-reset through psci system reset 2.
- system_reset2 implementation that calls for l2 cache reset
- Check for magic number and request for warm reset in bl2
- Create a shared reset manager header file for Agilex and Stratix 10
- Clean up parameter info in plat_get_next_bl_params
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3fdd9a2711c80d9bd3dc05b81527781d840bd726
Load BL31 to DDR instead of On-Chip RAM for scalability. Also, make use
of On-Chip RAM for BL31 specific variables filling down from handoff
offset to reduce fragmentation
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib64f48bd14f71e5fca2d406f4ede3386f2881099
Pull out SiP & PSCI service driver into socfpga common directory.
Remove deassert_peripheral_reset from cold reset procedure as it is not
needed.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1a0390fca6db4c89919a2a038de2a9d96c3ae4fd
2019-11-28 12:47:58 +08:00
Renamed from plat/intel/soc/agilex/socfpga_psci.c (Browse further)
