Current build infra defaults all cpufeats in defaults.mk and some
mandatory features are enabled in arch_features.mk and optional
arch features are enabled in platform specific makefile.
This fragmentation is sometime confusing to figure out which feature
is tied to which ARCH_MAJOR.ARCH_MINOR.
So, consolidating and grouping them for tracking and enabling makes
more sense. With this change we consolidate all ARCH feature handling
within arch_features.mk and disable all optional features that need
to be enabled to platform makefile.
This is an ongoing series of effort to consolidate and going forward
platform makefile should just specify ARCH_MAJOR and ARCH MINOR and
all mandatory feature should be selected based on arch_features.mk
any optional feature needed by the platform support can be enabled
by platform makefile.
It also makes it easier for platform ports to look upto arch_features.mk
and enable any optional feature that platform may need which are
supported from TF-A.
Change-Id: I18764008856d81414256b6cbabdfa42a16b8040d
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Add header file to help with creation of SPMD logical partitions. Also
update linker files to create sections to record SPMD logical partitions
declared. This follows the same pattern as the EL3 SPMC's logical
partitions. This patch also adds initialization of SPMD logical
partitions when the SPMD comes up.
ENABLE_SPMD_LP is a build flag that is used to enable support for
SPMD logical partitions.
Note that the approach chosen is to keep SPMD and SPMC logical
partition support separate, as opposed to extend the existing SPMC
logical partition support since the code would need to have a number of
ifdefs and the interactions with various build options such as
SPMC_AT_EL3 needs to be accounted for, which would make code more
complicated.
Signed-off-by: Raghu Krishnamurthy <raghu.ncstate@gmail.com>
Change-Id: I9642ddbf6ea26dd3f4a283baec598d61c07e3661
The current usage of RAS_EXTENSION in TF-A codebase is to cater for two
things in TF-A :
1. Pull in necessary framework and platform hooks for Firmware first
handling(FFH) of RAS errors.
2. Manage the FEAT_RAS extension when switching the worlds.
FFH means that all the EAs from NS are trapped in EL3 first and signaled
to NS world later after the first handling is done in firmware. There is
an alternate way of handling RAS errors viz Kernel First handling(KFH).
Tying FEAT_RAS to RAS_EXTENSION build flag was not correct as the
feature is needed for proper handling KFH in as well.
This patch breaks down the RAS_EXTENSION flag into a flag to denote the
CPU architecture `ENABLE_FEAT_RAS` which is used in context management
during world switch and another flag `RAS_FFH_SUPPORT` to pull in
required framework and platform hooks for FFH.
Proper support for KFH will be added in future patches.
BREAKING CHANGE: The previous RAS_EXTENSION is now deprecated. The
equivalent functionality can be achieved by the following
2 options:
- ENABLE_FEAT_RAS
- RAS_FFH_SUPPORT
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I1abb9ab6622b8f1b15712b12f17612804d48a6ec
Workaround to help enable the kernel to query errata status using the
errata abi feature for platforms with a non-arm interconnect.
Change-Id: I47b03eaee5a0a763056ae71883fa30dfacb9b3f7
Signed-off-by: Sona Mathew <SonaRebecca.Mathew@arm.com>
This patch adds the errata management firmware interface for lower ELs
to discover details about CPU erratum. Based on the CPU erratum
identifier the interface enables the OS to find the mitigation of an
erratum in EL3.
The ABI can only be present in a system that is compliant with SMCCCv1.1
or higher. This implements v1.0 of the errata ABI spec.
For details on all possible return values, refer the design
documentation below:
ABI design documentation:
https://developer.arm.com/documentation/den0100/1-0?lang=en
Signed-off-by: Sona Mathew <SonaRebecca.Mathew@arm.com>
Change-Id: I70f0e2569cf92e6e02ad82e3e77874546232b89a
Currently, enabling SME forces SVE off. However, the SME enablement
requires SVE to be enabled, which is reflected in code. This is the
opposite of what the build flags require.
Further, the few platforms that enable SME also explicitly enable SVE.
Their platform.mk runs after the defaults.mk file so this override never
materializes. As a result, the override is only present on the
commandline.
Change it to something sensible where if SME is on then code can rely on
SVE being on too. Do this with a check in the Makefile as it is the more
widely used pattern. This maintains all valid use cases but subtly
changes corner cases no one uses at the moment to require a slightly
different combination of flags.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: If7ca3972ebc3c321e554533d7bc81af49c2472be
This patch introduces support to handle traps from lower ELs for
IMPDEF system register accesses. The actual support is left to the
platforms to implement.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I623d5c432b4ce4328b68f238c15b1c83df97c1e5
FEAT_SME2 is an extension of FEAT_SME and an optional feature
from v9.2. Its an extension of SME, wherein it not only
processes matrix operations efficiently, but also provides
outer-product instructions to accelerate matrix operations.
It affords instructions for multi-vector operations.
Further, it adds an 512 bit architectural register ZT0.
This patch implements all the changes introduced with FEAT_SME2
to ensure that the instructions are allowed to access ZT0
register from Non-secure lower exception levels.
Additionally, it adds support to ensure FEAT_SME2 is aligned
with the existing FEATURE DETECTION mechanism, and documented.
Change-Id: Iee0f61943304a9cfc3db8f986047b1321d0a6463
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Arm v9.4 introduces support for Guarded Control Stack, providing
mitigations against some forms of RPO attacks and an efficient mechanism
for obtaining the current call stack without requiring a full stack
unwind. Enable access to this feature for EL2 and below, context
switching the newly added EL2 registers as appropriate.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I691aa7c22e3547bb3abe98d96993baf18c5f0e7b
Arm v8.9 introduces a series of features providing a new way to set memory
permissions. Instead of directly encoding the permissions in the page
tables the PTEs contain indexes into an array of permissions stored in
system registers, allowing greater flexibility and density of encoding.
Enable access to these features for EL2 and below, context switching the
newly added EL2 registers as appropriate. Since all of FEAT_S[12]P[IO]E
are separately discoverable we have separate build time options for
enabling them, but note that there is overlap in the registers that they
implement and the enable bit required for lower EL access.
Change the FVP platform to default to handling them as dynamic options so
the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: Icf89e444e39e1af768739668b505661df18fb234
Add support for runtime detection (ENABLE_SVE_FOR_NS=2), by splitting
sve_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SVE specific setup.
Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.
Change-Id: I1caaba2216e8e2a651452254944a003607503216
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Add support for runtime detection (ENABLE_SME_FOR_NS=2), by splitting
feat_sme_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SME specific setup.
Change the FVP platform default to the now supported dynamic option
(=2),so the right decision can be made by the code at runtime.
Change-Id: Ida9ccf737db5be20865b84f42b1f9587be0626ab
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
* changes:
feat(sc7280): add support for PSCI_OS_INIT_MODE
feat(fvp): enable support for PSCI OS-initiated mode
feat(psci): update PSCI_FEATURES
feat(psci): add support for OS-initiated mode
feat(psci): add support for PSCI_SET_SUSPEND_MODE
build(psci): add build option for OS-initiated mode
docs(psci): add design proposal for OS-initiated mode
So far we have the ENABLE_AMU build option to include AMU register
handling code for enabling and context switch. There is also an
ENABLE_FEAT_AMUv1 option, solely to protect the HAFGRTR_EL2 system
register handling. The latter needs some alignment with the new feature
scheme, but it conceptually overlaps with the ENABLE_AMU option.
Since there is no real need for two separate options, unify both into a
new ENABLE_FEAT_AMU name in a first step. This is mostly just renaming at
this point, a subsequent patch will make use of the new feature handling
scheme.
Change-Id: I97d8a55bdee2ed1e1509fa9f2b09fd0bdd82736e
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we only support FEAT_SPE to be either unconditionally
compiled in, or to be not supported at all.
Add support for runtime detection (ENABLE_SPE_FOR_NS=2), by splitting
is_armv8_2_feat_spe_present() into an ID register reading function and
a second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we access SPE related registers.
Previously SPE was enabled unconditionally for all platforms, change
this now to the runtime detection version.
Change-Id: I830c094107ce6a398bf1f4aef7ffcb79d4f36552
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we hardcode the SPE functionality to be available on the
non-secure side only, by setting MDCR_EL2.E2PB accordingly.
This should be reflected in the feature selection symbol, so rename that
to ENABLE_SPE_FOR_NS, to make it clearer that SPE is not supported in
the secure world.
Change-Id: I3f9b48eab1a45d6ccfcbb9c90a11eeb66867ad9a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Arm v8.9 introduces FEAT_TCR2, adding extended translation control
registers. Support this, context switching TCR2_EL2 and disabling
traps so lower ELs can access the new registers.
Change the FVP platform to default to handling this as a dynamic option so
the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I297452acd8646d58bac64fc15e05b06a543e5148
BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).
BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.
Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Adopted RESET_TO_BL31_WITH_PARAMS functionality in RESET_TO_BL31
in the subsequent patches hence reverted this patch.
This reverts commit 25844ff728.
Change-Id: Ia0bfa22fc45754f15c82638662dde93f604992c3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
CTX_INCLUDE_EL2_REGS is used to save/restore EL2 registers and
it should be only used when there is SPMD or RME enabled.
Make CTX_INCLUDE_EL2_REGS an internal macro and remove
from documentation.
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Change-Id: I6a70edfd88163423ff0482de094601cf794246d6
When updated to work with OpenSSL 3.0, the host tools lost their
compatibility with previous versions (1.x) of OpenSSL. This is
mainly due to the fact that 1.x APIs became deprecated in 3.0 and
therefore their use cause compiling errors. In addition, updating
for a newer version of OpenSSL meant improving the stability
against security threats. However, although version 1.1.1 is
now deprecated, it still receives security updates, so it would
not imply major security issues to keep compatibility with it too.
This patch adds backwards compatibility with OpenSSL 1.x versions
by adding back 1.x API code. It defines a macro USING_OPENSSL3,
which will select the appropriate OpenSSL API version depending on
the OpenSSL library path chosen (which is determined by the
already-existing OPENSSL_DIR variable).
In addition, cleanup items were packed in functions and moved to
the proper modules in order to make the code more maintainable and
legible.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I8deceb5e419edc73277792861882404790ccd33c
When a core is in debug recovery mode its caches are not invalidated
upon reset, so the L1 and L2 cache contents from before reset are
observable after reset. Similarly, debug recovery mode of DynamIQ
cluster ensures that contents of the shared L3 cache are also not
invalidated upon transition to On mode.
Booting cores in debug recovery mode means booting with caches disabled
and preserving the caches until a point where software can dump the
caches and retrieve their contents. TF-A however unconditionally cleans
and invalidates caches at multiple points during boot. This can lead to
memory corruption as well as loss of cache contents to be used for
debugging.
This patch fixes this by calling a platform hook before performing CMOs
in helper routines in cache_helpers.S. The platform hook plat_can_cmo is
an assembly routine which must not clobber x2 and x3, and avoid using
stack. The whole checking is conditional upon `CONDITIONAL_CMO` which
can be set at compile time.
Signed-off-by: Okash Khawaja <okash@google.com>
Change-Id: I172e999e4acd0f872c24056e647cc947ee54b193
This patch adds the following changes to complete the existing
TRNG implementation:
1. Adds a feature specific scope for buildlog generation.
2. Updates the docs on the build flag "TRNG_SUPPORT" and its values.
3. Makefile update and improves the existing comments at few sections
for better understanding of the underlying logic.
Change-Id: I3f72f0ccd5c94005a2df87158cf23199d2160d37
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Current RAS framework in TF-A only supports handling errors originating
from NS world but the HANDLE_EA_EL3_FIRST flag configures it for all
lower Els. To make the current design of RAS explicit, rename this macro
to HANDLE_EA_EL3_FIRST_NS and set EA bit in scr_el3 only when
switching to NS world.
Note: I am unaware of any platform which traps errors originating in
Secure world to EL3, if there is any such platform then it need to
be explicitly implemented in TF-A
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: If58eb201d8fa792c16325c85c26056e9b409b750
RAS_TRAP_LOWER_EL_ERR_ACCESS was used to prevent access to RAS error
record registers (RAS ERR* & RAS ERX*) from lower EL's in any security
state. To give more fine grain control per world basis re-purpose this
macro to RAS_TRAP_NS_ERR_REC_ACCESS, which will enable the trap only
if Error record registers are accessed from NS.
This will also help in future scenarios when RAS handling(in Firmware
first handling paradigm)can be offloaded to a secure partition.
This is first patch in series to refactor RAS framework in TF-A.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ifa7f60bc8c82c9960adf029001bc36c443016d5d
FEAT_RNG_TRAP introduces support for EL3 trapping of reads of the
RNDR and RNDRRS registers, which is enabled by setting the
SCR_EL3.TRNDR bit. This patch adds a new build flag
ENABLE_FEAT_RNG_TRAP that enables the feature.
This feature is supported only in AArch64 state from Armv8.5 onwards.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: Ia9f17aef3444d3822bf03809036a1f668c9f2d89
Currently Tf-A uses whatever openssl binary is on the system to sign
images. However if OPENSSL_DIR is specified in the build flags this can
lead to linking issues as the system binary can end up being linked
against shared libraries provided in OPENSSL_DIR/lib if both binaries
(the system's and the on in OPENSSL_DIR/bin) are the same version.
This patch ensures that the binary used is always the one given by
OPENSSL_DIR to avoid those link issues.
Signed-off-by: Salome Thirot <salome.thirot@arm.com>
Change-Id: Ib534e06ebc8482e4391e376d3791a87968de4a99
Currently the SVE code hard codes a maximum vector length of 512 bits
when configuring SVE rather than the architecture supported maximum.
While this is fine for current physical implementations the architecture
allows for vector lengths up to 2048 bits and emulated implementations
generally allow any length up to this maximum.
Since there may be system specific reasons to limit the maximum vector
length make the limit configurable, defaulting to the architecture
maximum. The default should be suitable for most implementations since
the hardware will limit the actual vector length selected to what is
physically supported in the system.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I22c32c98a81c0cf9562411189d8a610a5b61ca12
Added DRTM support build option in the makefiles.
This build option will be used by the DRTM implementation
in the subsequent patches.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Signed-off-by: Lucian Paul-Trifu <lucian.paultrifu@gmail.com>
Change-Id: I15366f86b3ebd6ab2ebcb192753015d547cdddee
Introduce PLAT_RSS_NOT_SUPPORTED build config to
provide a mocked version of PSA APIs. The goal is
to test the RSS backend based measured boot and
attestation token request integration on such
a platform (AEM FVP) where RSS is otherwise
unsupported. The mocked PSA API version does
not send a request to the RSS, it only returns
with success and hard-coded values.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: Ice8d174adf828c1df08fc589f0e17abd1e382a4d
This patch enables access to the branch record buffer control registers
in non-secure EL2 and EL1 using the new build option ENABLE_BRBE_FOR_NS.
It is disabled for all secure world, and cannot be used with ENABLE_RME.
This option is disabled by default, however, the FVP platform makefile
enables it for FVP builds.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I576a49d446a8a73286ea6417c16bd0b8de71fca0
It is not always the case that RESET_TO_BL31 enabled platforms don't
execute a bootloader before BL31.
For those use cases, being able to receive arguments from that first
loader (i.e: a DTB with TPM logs) might be necessary feature.
This code has been validated on iMX8mm.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Change-Id: Ibf00c3867cb1d1012b8b376e64ccaeca1c9d2bff
The current implementation uses plat_arm API under generic code.
"plat_arm" API is a convention used with Arm common platform layer
and is reserved for that purpose. In addition, the function has a
weak definition which is not encouraged in TF-A.
Henceforth, removing the weak API with a configurable macro "TWED_DELAY"
of numeric data type in generic code and simplifying the implementation.
By default "TWED_DELAY" is defined to zero, and the delay value need to
be explicitly set by the platforms during buildtime.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I25cd6f628e863dc40415ced3a82d0662fdf2d75a
Introduce build flag for enabling the secure partition
manager core, SPMC_AT_EL3. When enabled, the SPMC module
will be included into the BL31 image. By default the
flag is disabled.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I5ea1b953e5880a07ffc91c4dea876a375850cf2a
This patch adds architectural features detection procedure to ensure
features enabled are present in the given hardware implementation.
It verifies whether the architecture build flags passed during
compilation match the respective features by reading their ID
registers. It reads through all the enabled feature specific ID
registers at once and panics in case of mismatch(feature enabled
but not implemented in PE).
Feature flags are used at sections (context_management,
save and restore routines of registers) during context switch.
If the enabled feature flag is not supported by the PE, it causes an
exception while saving or restoring the registers guarded by them.
With this mechanism, the build flags are validated at an early
phase prior to their usage, thereby preventing any undefined action
under their control.
This implementation is based on tristate approach for each feature and
currently FEAT_STATE=0 and FEAT_STATE=1 are covered as part of this
patch. FEAT_STATE=2 is planned for phase-2 implementation and will be
taken care separately.
The patch has been explicitly tested, by adding a new test_config
with build config enabling majority of the features and detected
all of them under FVP launched with parameters enabling v8.7 features.
Note: This is an experimental procedure and the mechanism itself is
guarded by a macro "FEATURE_DETECTION", which is currently being
disabled by default.
The "FEATURE_DETECTION" macro is documented and the platforms are
encouraged to make use of this diagnostic tool by enabling this
"FEATURE_DETECTION" flag explicitly and get used to its behaviour
during booting before the procedure gets mandated.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: Ia23d95430fe82d417a938b672bfb5edc401b0f43
Add new options SEPARATE_BL2_NOLOAD_REGION to separate no-loadable
sections (.bss, stack, page tables) to a ram region specified
by BL2_NOLOAD_START and BL2_NOLOAD_LIMIT.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I844ee0fc405474af0aff978d292c826fbe0a82fd
