CryptoCell-712 and CryptoCell-713 drivers have been deprecated since
TF-A v2.9 and their removal was announced for TF-A v2.10 release.
See [1].
As the release is approaching, this patch deletes these drivers' code as
well as all references to them in the documentation and Arm platforms
code (Nuvoton platform is taken care in a subsequent patch). Associated
build options (ARM_CRYPTOCELL_INTEG and PLAT_CRYPTOCELL_BASE) have also
been removed and thus will have no effect if defined.
This is a breaking change for downstream platforms which use these
drivers.
[1] https://trustedfirmware-a.readthedocs.io/en/v2.9/about/release-information.html#removal-of-deprecated-drivers
Note that TF-A v3.0 release later got renumbered into v2.10.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: Idabbc9115f6732ac1a0e52b273d3380677a39813
This patch removes RAS_FFH_SUPPORT macro which is the combination of
ENABLE_FEAT_RAS and HANDLE_EA_EL3_FIRST_NS. Instead introduce an
internal macro FFH_SUPPORT which gets enabled when platforms wants
to enable lower EL EA handling at EL3. The internal macro FFH_SUPPORT
will be automatically enabled if HANDLE_EA_EL3_FIRST_NS is enabled.
FFH_SUPPORT along with ENABLE_FEAT_RAS will be used in source files
to provide equivalent check which was provided by RAS_FFH_SUPPORT
earlier. In generic code we needed a macro which could abstract both
HANDLE_EA_EL3_FIRST_NS and RAS_FFH_SUPPORT macros that had limitations.
Former was tied up with NS world only while the latter was tied to RAS
feature.
This is to allow Secure/Realm world to have their own FFH macros
in future.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ie5692ccbf462f5dcc3f005a5beea5aa35124ac73
Current build infra defaults all cpufeats in defaults.mk and some
mandatory features are enabled in arch_features.mk and optional
arch features are enabled in platform specific makefile.
This fragmentation is sometime confusing to figure out which feature
is tied to which ARCH_MAJOR.ARCH_MINOR.
So, consolidating and grouping them for tracking and enabling makes
more sense. With this change we consolidate all ARCH feature handling
within arch_features.mk and disable all optional features that need
to be enabled to platform makefile.
This is an ongoing series of effort to consolidate and going forward
platform makefile should just specify ARCH_MAJOR and ARCH MINOR and
all mandatory feature should be selected based on arch_features.mk
any optional feature needed by the platform support can be enabled
by platform makefile.
It also makes it easier for platform ports to look upto arch_features.mk
and enable any optional feature that platform may need which are
supported from TF-A.
Change-Id: I18764008856d81414256b6cbabdfa42a16b8040d
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Move documentation related to Arm(R) Ethos(TM)-N NPU driver from
docs/plat/arm/arm-build-options.rst to
docs/getting_started/build-options.rst.
Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Change-Id: I388e8dcd3950b11bc3305f5e6396ee2e49c04493
A separate design document for Measured Boot covers the porting
guidelines for the Measured Boot interfaces. As a result,
the Measured Boot interfaces have been removed from the porting
guide and a link to the Measured Boot design document has been
provided.
Change-Id: Ia6bd2620d830aea6aececab4af7e10a6d737f025
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
PSCI specification reference in the documentation is updated
to point to latest specification and duplicate PSCI references are
removed.
Change-Id: I35ee365f08c557f3017af4d51f6d063a7501b27e
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch adds a new optional member `pwr_domain_validate_suspend` to
the `plat_psci_ops_t` structure that allows a platform to optionally
perform platform specific validations in OS-initiated mode. This is
conditionally compiled into the build depending on the value of the
`PSCI_OS_INIT_MODE` build option.
In https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/17682,
the return type of the `pwr_domain_suspend` handler was updated from
`void` to `int` to allow a platform to optionally perform platform
specific validations in OS-initiated mode. However, when an error code
other than `PSCI_E_SUCCESS` is returned, the current exit path does not
undo the operations in `psci_suspend_to_pwrdown_start`, and as a result,
the system ends up in an unexpected state.
The fix in this patch prevents the need to undo the operations in
`psci_suspend_to_pwrdown_start`, by allowing the platform to first
perform any necessary platform specific validations before the PSCI
generic code proceeds to the point of no return where the CPU_SUSPEND
request is expected to complete successfully.
Change-Id: I05d92c7ea3f5364da09af630d44d78252185db20
Signed-off-by: Wing Li <wingers@google.com>
The current usage of RAS_EXTENSION in TF-A codebase is to cater for two
things in TF-A :
1. Pull in necessary framework and platform hooks for Firmware first
handling(FFH) of RAS errors.
2. Manage the FEAT_RAS extension when switching the worlds.
FFH means that all the EAs from NS are trapped in EL3 first and signaled
to NS world later after the first handling is done in firmware. There is
an alternate way of handling RAS errors viz Kernel First handling(KFH).
Tying FEAT_RAS to RAS_EXTENSION build flag was not correct as the
feature is needed for proper handling KFH in as well.
This patch breaks down the RAS_EXTENSION flag into a flag to denote the
CPU architecture `ENABLE_FEAT_RAS` which is used in context management
during world switch and another flag `RAS_FFH_SUPPORT` to pull in
required framework and platform hooks for FFH.
Proper support for KFH will be added in future patches.
BREAKING CHANGE: The previous RAS_EXTENSION is now deprecated. The
equivalent functionality can be achieved by the following
2 options:
- ENABLE_FEAT_RAS
- RAS_FFH_SUPPORT
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I1abb9ab6622b8f1b15712b12f17612804d48a6ec
This patch introduces support to handle traps from lower ELs for
IMPDEF system register accesses. The actual support is left to the
platforms to implement.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I623d5c432b4ce4328b68f238c15b1c83df97c1e5
This patch introduces the 'pwr_domain_off_early' hook for
platforms wanting to perform housekeeping steps before the
PSCI framework starts the CPU power off sequence. Platforms
might also want to use ths opportunity to ensure that the
CPU off sequence can proceed.
The PSCI framework expects a return code of PSCI_E_DENIED,
if the platform wants to halt the CPU off sequence.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I6980e84fc4d6cb80537a178d0d3d26fb28a13853
Following discussions in the reviews of the patch that introduced
plat_convert_pk() function [1], it was decided to deprecate it to
avoid weak function declaration.
A new optional function pointer convert_pk is added to crypto_lib_desc_t.
A new function crypto_mod_convert_pk() will either call
crypto_lib_desc.convert_pk() if it is defined, or do the same
as what was done by the weak function otherwise.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/17174
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I9358867f8bfd5e96b5ee238c066877da368e43c6
When porting TF-A to a new platform, it is essential to read the
threat model documents in conjunction with the porting guide to
understand the security responsibilities of each platform interface
to implement.
Add a note to highlight this in the porting guide.
Change-Id: Icd1e41ae4b15032b72531690dd82a9ef95ca0db5
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The porting guide is currently hosted under the 'Getting started'
section. Yet, porting the full firmware to a new platform is probably
not the first thing that one would do. Before delving into the
details, one would probably start by building the code for an emulated
platform, such as Arm FVP.
Furthermore, the porting guide is such a big and important document
that it probably deserves being visible in the main table of contents.
Thus, move it just above the list of supported platforms.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: I51b3d2a93832505ab90d73c823f06f9540e84c77
This change creates the following directories under docs/
in order to provide a grouping for the content:
- components
- design
- getting_started
- perf
- process
In each of these directories an index.rst file is created
and this serves as an index / landing page for each of the
groups when the pages are compiled. Proper layout of the
top-level table of contents relies on this directory/index
structure.
Without this patch it is possible to build the documents
correctly with Sphinx but the output looks messy because
there is no overall hierarchy.
Change-Id: I3c9f4443ec98571a56a6edf775f2c8d74d7f429f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.
The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.
Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Fix some typos and clarify some sentences.
Change-Id: Id276d1ced9a991b4eddc5c47ad9a825e6b29ef74
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The previous commit added the infrastructure to load and save
ARMv8.3-PAuth registers during Non-secure <-> Secure world switches, but
didn't actually enable pointer authentication in the firmware.
This patch adds the functionality needed for platforms to provide
authentication keys for the firmware, and a new option (ENABLE_PAUTH) to
enable pointer authentication in the firmware itself. This option is
disabled by default, and it requires CTX_INCLUDE_PAUTH_REGS to be
enabled.
Change-Id: I35127ec271e1198d43209044de39fa712ef202a5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Platforms are not allowed to use any file inside include/plat/arm or
plat/arm to prevent dependencies between Arm platforms and non-Arm
platforms.
Change-Id: I6dc336ab71134c8d2758761fac0e4716e2d7e6ff
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Using Sphinx linkcheck on the TF-A docs revealed some broken
or permanently-redirected links. These have been updated where
possible.
Change-Id: Ie1fead47972ede3331973759b50ee466264bd2ee
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Fix links to SCC and FreeBSD. Direct links do not need any special
formatting.
Change-Id: I00f7343d029a30ec02dfaa0ef393b3197260cab9
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Replace all occurences of escaped underscore characters by plain ones.
This makes the text version of the porting guide easier to read and
grep into.
Change-Id: I7bf3b292b686be4c6d847a467b6708ac16544c90
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Also, update platform_def.h guidelines about includes in the porting
guide.
Change-Id: I1ae338c9dd3242b309f6d53687ba2cb755d488c3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Commit ed51b51f7a ("Remove build option LOAD_IMAGE_V2") intended
to remove all code related to LOAD_IMAGE_V2=0 but missed a few things.
Change-Id: I16aaf52779dd4af1e134e682731328c5f1e5d622
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Corrects typos in core code, documentation files, drivers, Arm
platforms and services.
None of the corrections affect code; changes are limited to comments
and other documentation.
Change-Id: I5c1027b06ef149864f315ccc0ea473e2a16bfd1d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Crash reporting via the default consoles registered by MULTI_CONSOLE_API
has been broken since commit d35cc34 (Console: Use callee-saved
registers), which was introduced to allow console drivers written in C.
It's not really possible with the current crash reporting framework to
support console drivers in C, however we should make sure that the
existing assembly drivers that do support crash reporting continue to
work through the MULTI_CONSOLE_API.
This patch fixes the problem by creating custom console_putc() and
console_flush() implementations for the crash reporting case that do not
use the stack. Platforms that want to use this feature will have to link
plat/common/aarch64/crash_console_helpers.S explicitly.
Also update the documentation to better reflect the new reality (of this
being an option rather than the expected default for most platforms).
Change-Id: Id0c761e5e2fddaf25c277bc7b8ab603946ca73cb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Platforms that wish to use the sample functions have to add the file to
their Makefile. It is not included by default.
Change-Id: I713617bb58dc218967199248f68da86241d7ec40
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Information regarding platform compatibility policy
is added to the documentation.
Change-Id: If9f2a11160f81354ee2c678f0fca9d67fc7366e6
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This patch introduces the shared Mbed TLS heap optimisation for Arm
platforms. The objective is the Mbed TLS heap to be shared between BL1
and BL2 so as to not allocate the heap memory twice. To achieve that,
the patch introduces all the necessary helpers for implementing this
optimisation. It also applies it for FVP.
Change-Id: I6d85eaa1361517b7490956b2ac50f5fa0d0bb008
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
The Mbed TLS drivers, in order to work, need a heap for internal usage.
This heap, instead of being directly referenced by the drivers, now it
is being accessed indirectly through a pointer. Also, the heap, instead
of being part of the drivers, now it is being received through the
plat_get_mbedtls_heap() function. This function requests a heap from the
current BL image which utilises the Mbed TLS drivers.
Those changes create the opportunity for the Mbed TLS heap to be shared
among different images, thus saving memory. A default heap
implementation is provided but it can be overridden by a platform
specific, optimised implemenetation.
Change-Id: I286a1f10097a9cdcbcd312201eea576c18d157fa
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
Taken from http://git.simple-cc.org/scc/ from the following commit:
67508ad14af314cea2229783d3c084f28c41daf0
Permission has been granted from the author to use them under the
license BSD-3-Clause instead of ISC.
Change-Id: I65c0ce3ab60c49d34a57533af12a74bd7bde88e5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Having an active stack while enabling MMU has shown coherency problems.
This patch builds on top of translation library changes that introduces
MMU-enabling without using stacks.
Previously, with HW_ASSISTED_COHERENCY, data caches were disabled while
enabling MMU only because of active stack. Now that we can enable MMU
without using stack, we can enable both MMU and data caches at the same
time.
NOTE: Since this feature depends on using translation table library v2,
disallow using translation table library v1 with HW_ASSISTED_COHERENCY.
FixesARM-software/tf-issues#566
Change-Id: Ie55aba0c23ee9c5109eb3454cb8fa45d74f8bbb2
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
In the porting guide, there are blue boxes that describe the argument
types and the return type of each function. A small typo caused some of
these boxes not being properly rendered.
In the user guide, small typos were fixed that caused random text being
unintentionally rendered as bold. Also, a slight rewording was done in
the section describing the DYN_DISABLE_AUTH flag.
Change-Id: I57303ca609436a82162fa9b42c06b0d5a63da6df
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
In the porting guide, fix the function name and the argument type to
reflect the code.
Change-Id: Iac8d69af403194de5586bc0d5890da531e3c8da2
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
In some use-cases BL2 will be stored in eXecute In Place (XIP) memory,
like BL1. In these use-cases, it is necessary to initialize the RW sections
in RAM, while leaving the RO sections in place. This patch enable this
use-case with a new build option, BL2_IN_XIP_MEM. For now, this option
is only supported when BL2_AT_EL3 is 1.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Update Arm Trusted Firmware references in the upstream documents to
Trusted Firmware-A (TF-A). This is for consistency with and
disambiguation from Trusted Firmware-M (TF-M).
Also update other Arm trademarks, e.g. ARM->Arm, ARMv8->Armv8-A.
Change-Id: I8bb0e18af29c6744eeea2dc6c08f2c10b20ede22
Signed-off-by: Dan Handley <dan.handley@arm.com>
Signed-off-by: David Cunado <david.cunado@arm.com>
This patch updates the `firmware-design.rst` document for
changes in ARM-TF for supporting dynamic configuration features
as presented in `Secure Firmware BoF SFO'17`[1].
The patch also updates the user-guide for 2 build options for FVP
pertaining to dynamic config.
[1] https://www.slideshare.net/linaroorg/bof-device-tree-and-secure-firmware-bof-sfo17310
Change-Id: Ic099cf41e7f1a98718c39854e6286d884011d445
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
