Enable query of fip offset from QSPI on RSU boot for
Intel agilex and intel agilex5 platform
Change-Id: Iaa189c54723a8656b9691da5849fd86b9986cfa1
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
Query the fip binary from SPT table on RSU boot on Intel Agilex series.
Change-Id: I8856b49539f33272625d4c0a8c26b81b5864c4eb
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
* changes:
feat(intel): support QSPI ECC Linux for Agilex
feat(intel): support QSPI ECC Linux for N5X
feat(intel): support QSPI ECC Linux for Stratix10
feat(intel): add in QSPI ECC for Linux
Add QSPI ECC new opcodes for Linux to access to SDM register
Change-Id: If9ac35afdddb91db6bad6b474060cd001f6d89e6
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Remap base address for SDM to access DRAM.
Change-Id: If064bd1ff4571d3217b136d9b5ebbfdecb68231e
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
This patch is used to update the hardcoded mpu freq ticks
to obtain the freqq from the hardware setting itself.
Change-Id: I7b9eb49f2512b85fb477110f06ae86ef289aee58
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Linux RAS shall handle the SEU error received from SDM and report
an error message to user
Change-Id: I89181a388063ce9bd6f56b45b1851ccb08582437
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This patch is used to update reset manager support
for Agilex5 Soc FPGA.
1. Update HPS bridges support for socfpga_bridges_disable
a. SOC2FPGA
b. LWSOC2FPGA
c. F2SDRAM
d. F2SOC
Change-Id: Ia539ff289e83303ae3b4d78b9ac1d50c9f9558da
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
This patch is used to enable platform enablement for
Agilex5 SoC FPGA.
New feature:
1. Added ATF->Zephyr boot option
2. Added xlat_v2 for MMU
3. Added ATF->Linux boot option
4. Added SMP support
5. Added HPS bridges support
6. Added EMULATOR support
7. Added DDR support
8. Added GICv3 Redistirbution init
9. Added SDMMC/NAND/Combo Phy support
10. Updated GIC as secure access
11. Added CCU driver support
12. Updated product name -> Agilex5
13. Updated register address based on y22ww52.2 RTL
14. Updated system counter freq to 400MHz
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Ice82f3e4535527cfd01500d4d528402985f72009
This patch is used to implement VAB to support for
Agilex5 SoC FPGA.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I421f11225cd549f35f06e87b8ad2c44b716b2a78
This patch is used to enable reset manager support
for Agilex5 SoC FPGA.
1. Added HPS bridges support
a. SOC2FPGA
b. LWSOC2FPGA
c. F2SDRAM
d. F2SOC
2. Added EMULATOR support
3. Added WDT support
4. Updated product name -> Agilex5
5. Added SMP support
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Icab15b25f787fdccce1de75d102604db23beaf11
This patch is used to enable mailbox and SMC support
for Agilex5 SoC FPGA.
1. Enabled mailbox and SMC support.
2. Updated product name -> Agilex5
3. Updated register address based on y22ww52.2 RTL
4. Updated TSN register base address
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I152bee5668b96ef599ded09945167f27a71f23fe
This patch is used to implement system manager data
support for Agilex5 SoC FPGA.
1. Initial SM bring up
2. Support Candence SDMMC/NAND/COMBO PHY
3. Updated product name -> Agilex5
4. Updated register address based on y22ww52.2 RTL
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I12712bddfb67e36a2bf56d2d98ea4ca3037f0a82
This patch is used to enable pinmux, peripheral and handoff support
for Agilex5 SoC FPGA.
1. Initial handoff bring up
2. Added power manager handoff implementation
3. Added sdram handoff implementation
4. Updated product name -> Agilex5
5. Updated register address based on y22ww52.2 RTL
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I4b0176bc86c57823127bf41086306015d702577d
Add smc function id for intel_rsu_update() in sip_svc_v2. For temporarily
saving the RSU application image address before a cold reset is
issued.
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I43bc7bd5aa5fa9238bceba1d826bf0a34ff87adb
This patch is to restructure system manager. Move platform dependent
MACROs to individual platform system manager. Common system manager will
remain for those common declaration only.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I2f52d3eaf47716f7dfc636bbf1a23d68a04f39cb
Add checking on the size of source data does not exceed source size
when using memcpy and memset.
Add checking on the size of source data in FPGA Crypto Service does
not exceed the maximum of expected data size and does not meet the
minimum of expected data size.
Signed-off-by: Phui Kei Wong <phui.kei.wong@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Idb18f05c18d9142fbe703c3f4075341d179d8bad
Enable SEU ERR read interfaces for non-secure world to read out SEU status
for DDR.
SEU ERR SMC opcode updated to 0xC2000099
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I0618dfcdc86a7c1e0c8047b7214d369866dd2281
Update Agilex and N5X clock manager to get MPU clock from mainPLL C0
and PeriPLLC0.
1. Updated macro name PLAT_SYS_COUNTER_CONVERT_TO_MHZ to
PLAT_HZ_CONVERT_TO_MHZ.
2. Updated get_cpu_clk to point to get_mpu_clk and added comment.
3. Added get_mpu_clk to get clock from main PLL C0 and Peri PLL C0.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I43a9d83caa832b61eba93a830e2a671fd4dffa19
Fix bridge sideband manager register clear and set incorrect
implementation. To support non-graceful full bridge disable
and enable.
Signed-off-by: Ang Tien Sung <tien.sung.ang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I651f3ec163d954e8efb0542ec33bce96e51992db
Add 2 more mailbox error return status for FCS_DECRYPTION when sending
mailbox command to SDM
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ifff4faa397232cc0080f9fca6f6948ac305915c4
No overflow buffer checking for param size. There is a security threat.
Update code to check for param size according to cryto param mode.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I37a2d047edd9ff835b3f0986d85309c402887bef
This patch is to extend support SMMU in FCS GET_DIGEST, MAC_VERIFY,
ECDSA_SHA2_DATA_SIGNING and ECDSA_SHA2_DATA_SIGNATURE_VERIFY.
It also will change to use asynchronous mailbox send command to improve
fcs_client timing performance.
Increase the SIP_SVC_VERSION_MAJOR because SMMU support is not backward
compatible.
Increase the SIP_SVC_VERSION_MINOR because 8 news function IDs are
introduced.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I15e619e246531b065451f9b201646f3c50e26307
When HPS requests QSPI controller access the SDM returns the QSPI
reference clock frequency. Store the provided reference clock frequency
(in kHz) in BOOT_SCRATCH_COLD_0 register (bits [27:0]) as u-boot
QSPI driver expects this.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I6b95c19db602387a79ff10abdebbc57abb0c07ff
Revise the UART baud rate and clock for general platform build,
SIMIC build and EMU build.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I62fefe7b96d5124e75d2810b4fbc1640422b1353
This patch is to fix configuration status command now returns
the result based on the last config start command made to the
runtime software. The status type can be either:
- NO_REQUEST (default)
- RECONFIGURATION
- BITSTREAM_AUTH
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I1ce4b7b4c741d88de88778f8fbed7dfe83a39fbc
This patch is to extend to support large file size
for SHA2/HMAC get digest and verifying. The large
file will be split into smaller chunk and send using
initialize, update and finalize staging method.
Signed-off-by: Yuslaimi, Alif Zakuan <alif.zakuan.yuslaimi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I1815deeb61287b32c3e77c5ac1b547b79ef12674
This patch is to extend to support large file size
for SHA-2 ECDSA data signing and signature verifying.
The large file will be split into smaller chunk and
send using initialize, update and finalize staging method.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: If277b2b375a404fe44b0858006c8ba6316a5ce23
This patch is to extend to support large file size
for AES encryption and decryption. The large file
will be split into smaller chunk and send using
initialize, update and finalize staging method.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ie2ceaf247e0d7082aad84faf399fbd18d129c36a
A separated SMC function ID of mailbox command
is introduced for the new format of SMC protocol.
The new format of SMC procotol will be started
using by Zephyr.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I7996d5054f76c139b5ad55451c373f5669a1017f
A separated SMC function ID of non-mailbox command
is introduced for the new format of SMC protocol.
The new format of SMC procotol will be started
using by Zephyr.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I01cff2739364b1bda2ebb9507ddbcef6095f5d29
Update the certificate mask to 0xff to cover all certificate
in Agilex family.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Id40bc3aa4b3e4f7568a58581bbb03a75b0f20a0b
Update to support maximum (4092 bytes) response data size.
And, clean up the intel_smc_service_completed function to
directly write the response data to addr to avoid additional
copy.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I0a230e73c563d22e6999ad3473587b07382dacfe
Supporting the command to send digital signature verification
request on a data blob. This include ECC algorithm such as
NISP P-256, NISP P-384, Brainpool 256 and, Branpool 384
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ic86f531bfe7cc7606699f2b064ac677aaf806a76
Supporting the command to send digital signature signing
request on a data blob. This include ECC algorithm such as
NISP P-256, NISP P-384, Brainpool 256 and, Branpool 384
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I12cf0f1ceaf07c33a110eae398d3ad82a9b13d38
This command sends the request on generating a share secret on
Diffie-Hellman key exchange.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ic7c8470cf036ea8c17bf87401f49936950b3e1d6
This command support ECC based signature verification on a blob.
Supported ECC algorithm are NISP P-256, NISP P-384, Brainpool 256
and Brainpool 384.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I7f43d2a69bbe6693ec1bb90f32b817cf00f9f5ae
This command support ECC based signing on a blob. Supported ECC algorithm
are NISP P-256, NISP P-384, Brainpool 256 and Brainpool 384.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I82f95ddafa6b62f8cd882fce9a3e63e469c85067
To support the ECDSA feature and send the command
as a request to get the public key
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I9d7bb5b6ab8ef7d4f3ceb21ff0068baf3175a1ac
Extends existing Secure Data Object Service (SDOS) encryption and
decryption mailbox command to include session id and context id. The
new format requires an opened crypto service session.
A separated SMC function ID is introduced for the new format and it is
only supported by Agilex.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I2627750e8337c1af66217e9cb45981a9e06e7d19
Enable Support for AES Crypt Service to send request
to encrypt or decrypt a blob. Command will send a memory
location that SDM will read and also memory location that
SDM will write back after encryption or decryption operation.
Response will be sent back after the crypto operation is done,
and data is written back to the destination
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I86ea4ff64dda2fbb1000591e30fa8cb2640ce954
This command sends request on checking the integrity and authenticity
of a blob by comparing the calculated MAC with tagged MAC. The
comparison result will be returned in response.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ifefdf67f088d7612d2ec2459d71faf2ec8181222
This command is to request the SHA-2 hash digest on a blob.
If input has a key, the output shall be key-hash digest.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I08cb82d89a8e8f7bfe04f5f01e079ea49fe38cf5
