Now that EARLY_CONSOLE is generic, use it instead of the ST flag.
Remove stm32mp_setup_early_console() calls as it is done in common TF-A
code.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Icac29b62a6267303cb5c679d15847c013ead1d23
Change the MCKPROT control management. Now, the MCU subsystem
is done in the BL32 using the dedicated clock function.
If using OP-TEE, you will need the corresponding commit [1].
This should be integrated in OP-TEE tag 4.2.0.
[1] e07f9212d5 plat-stm32mp1: shared_resource: disable MCKPROT if
not needed
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I59f90ace750aa93f674389f881e2fe14ad334a72
Add an API stm32_clear_fwu_trial_boot_cnt() function to clear the
trial state counter. This is called in the corner case scenario when
the active index is in an Invalid state, thus needing a reset of the
trial state counter.
Change-Id: I2980135da88d0d947c222655c7958b51eb572d69
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
This change migrates the values of `CC`, `CPP`, `AS` and other toolchain
variables to the new `$(toolchain)-$(tool)` variables, which were
introduced by the toolchain refactor patch. These variables should be
equivalent to the values that they're replacing.
Change-Id: I644fe4ce82ef1894bed129ddb4b6ab94fb04985d
Signed-off-by: Chris Kay <chris.kay@arm.com>
As these definitions will be the same for STM32MP1 and STM32MP2, move
PLATFORM_MTD_MAX_PAGE_SIZE and DWL_BUFFER_SIZE macro definition to the
file: plat/st/common/include/stm32mp_common.h
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I480669d009d15fec753298f47b136e34fa240132
PLAT_STM32MP_NS_IMAGE_OFFSET and PLAT_EMMC_BOOT_SSBL_OFFSET macros should
have been removed with patch [1].
[1] 981b9dcb87 ("refactor(stm32mp1): remove STM32MP_USE_STM32IMAGE")
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ice98c43c0257041226525199be06134fde8466c5
The fused monotonic counter is checked by the ROM bootloader. The ROM
bootloader won't allow booting images build with a lower
STM32_TF_VERSION value.
On non-closed devices a user can easily circumvent this. But it is
annoying for a developer when open development hardware gets the counter
value fused.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Change-Id: Ie52561368a3178de9d9a44b9d089664241452651
When STM32MP2 boots on Cortex-M33, the Cortex-A35 do no more have access
to BSEC peripheral. New static inline stm32_otp_* wrappers are added,
which just redirect to BSEC functions.
While at it remove a useless bsec.h include.
Change-Id: Ie0f917c02e48acf456634f455dae41805bf6adbf
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The function stm32mp_is_closed_device() is replaced with
stm32mp_check_closed_device(), which return an uint32_t, either
STM32MP_CHIP_SEC_OPEN or STM32MP_CHIP_SEC_CLOSED.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ie0790cdc36c4b6522083bc1f0e7c38e8061e6adf
In order to ease the introduction of a new BSEC3 driver for STM32MP25,
the BSEC2 driver is reworked. Unused functions are removed. The
bsec_base global variable is removed in favor of the macro BSEC_BASE.
A rework is also done around function checking the state of BSEC.
Change-Id: I1ad76cb67333ab9a8fa1d65db34d74a712bf1190
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is something commonly asked by Linux kernel DT maintainers [1].
The mentioned doc is not upstreamed, but may be checked with dtbs_check.
While at it align some nodes with Linux or OP-TEE.
[1] https://lore.kernel.org/linux-arm-kernel/20231125184422.12315-1-krzysztof.kozlowski@linaro.org/
Change-Id: I63e983c2a00eda3cd8b81c66c0cd1a97cf8249b7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
OP-TEE manages its own memory, and can open some areas through TZC400.
There is no need to configure this shared memory in TF-A.
Just assure that CFG_CORE_RESERVED_SHM=n for OP-TEE compilation.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ib54acd60d9ec243d6ef9cc6b74937b4183d9ffa5
This is an alignment with Linux DT files that have been merged in
stm32 tree [1], and will be in Linux 6.7.
The /omit-if-no-ref/ in overlay files are now removed, as already in
pinctrl files.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iab94b0ba7a4a0288ca53d1ae57ab590566967415
This file is common for ST platforms, move it to plat/st/common/.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I7cefbc7f857d4ea63320042988c86d28e8a3cc09
Rename PLAT_NB_FIXED_REGS to PLAT_NB_FIXED_REGUS.
This avoids confusion with regulators and registers.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Change-Id: Idb2de7204fe978ffcdd729e6cbe453e85fd089b5
Those storage macros are common to all STM32MPU chips, move them to
plat/st/common/include/stm32mp_io_storage.h
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id20ec00ba65edf9ec7a3a89adfda307c954c3cb6
Those specific SDMMC definitions are only used in stm32_sdmmc2.c driver.
Move them there.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iac7e505e9421aa7630bee8ce6fc2277b98581995
To have a more generic code, remove the Q from the *QSPI macros.
Change-Id: I2fa94b54054036c2175df3dfddcb76eec1119ad2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Pass "start_idx" to plat_scmi_clock_rates_array.
This parameter is required to obtain the rate table
a second time.
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Change-Id: I97c6751e7d34c839ced8f22bddc39fb534978cc4
* changes:
feat(bl32): print entry point before exiting SP_MIN
fix(bl32): avoid clearing argument registers in RESET_TO_SP_MIN case
fix(bl32): always include arm_arch_svc in SP_MIN
fix(services): disable workaround discovery on aarch32 for now
The PSCI_FEATURES call implementation in TF-A always indicates support
for SMCCC_VERSION, but only BL31 ensures that the corresponding Arm
Architecture Service (arm_arch_svc) is really included in the build.
For SP_MIN only stm32mp1 currently includes it in the platform-specific
make file.
This means that it is easily possible to build configurations that
violate the PSCI/SMCCC specification. On Linux this leads to incorrect
detection of the SMC Calling Convention when using SP_MIN:
[ 0.000000] psci: SMC Calling Convention v65535.65535
Fix this by always including the Arm Architecture Service in SP_MIN
builds. This allows Linux to detect the convention correctly:
[ 0.000000] psci: SMC Calling Convention v1.4
Change-Id: Iaa3076c162b7a55633ec1e27eb5c44d22f8eb2a1
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Refactor the SDCARD/EMMC FWU, to add the NOR-SPI use case.
SPI-NOR FWU won't use a real partition uuid to find the correct FIP,
but the UUID from metadata will correspond with a hardcoded offset in
the NOR.
While at it change some __unused keywords to __maybe_unused to ease
checkpatch.pl analysis.
Signed-off-by: Frank Bodammer <frank.bodammer@siemens.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2fe56ba8534a3c5dfaf8aeb16e7b286909883cc2
Device tree alignment with kernel and latest binding for BSEC node:
the rev2.0 is used on STM32MP13x devices with the new compatible
compatible = "st,stm32mp13-bsec".
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I76f86f2951eff4af91d22dfb926969fd842a36ce
The psci_get_pstate_* helpers return unsigned int values,
update the code accordingly. Remove the useless pstate variable.
This corrects MISRA C2012-14.4:
The controlling expression of an if statement and the controlling
expression of an iteration-statement shall have essentially Boolean
type.
Change-Id: Idc7e756f4ba2bc0d66a327763013f77f86fe16b2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The flags to set PKA algo are set to 0 when TRUSTED_BOARD_BOOT is not
set.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ib70a2bc51451a2047d7a50a8307e9063d4a2a0ee
This flag just needs to be defined, and does not need to have a boolean
value. Remove it from the assert_booleans check.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4e4c9ae1e5003ca2cf7c0c0e31d1561d032937c8
The files stm32mp_mbedtls_config-{2,3}.h are moved to
plat/st/common/include directory as they could be shared with other ST
platforms. Their prefixes are changed from stm32mp1 to stm32mp.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I86e39481b6c8d2689c59eb9a351b77b3d6233b08
Group configuration that could be common to several ST platforms.
Two common makefiles are created: common.mk for definitions and files
to compile, and common_rules.mk that gathers makefile compilation rules.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I7ea9b75c78e7d916854cdd984bbf921b1a46ebc4
BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).
BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.
Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Add stm32mp1_mbedtls_config-3.h config file for stm32mp1 builds with
mbedtls-3.3
Change-Id: I4581cb0ea7b2c7022e71aefd7ff05ee3a72f5883
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Move all plat_fiptool.mks into tools, change the logic to recursively
check for tools/fiptool/plat_fiptool/<plat_path>/plat_fiptool.mk
I.e. for a platform that has the path "plat/arm/board/tc/platform.mk",
the makefile will now load the first existing file from:
- tools/fiptool/plat_fiptool/arm/board/tc/plat_fiptool.mk
- tools/fiptool/plat_fiptool/arm/board/plat_fiptool.mk
- tools/fiptool/plat_fiptool/arm/plat_fiptool.mk
This enables fiptool to support multiple platforms, or a specific one.
Remove file-copying previously being used to handle old default path.
Remove custom file cleaning in plat_fiptool.mk.
Change-Id: I95245bcf7143b329481d4394ab64f29bfe9de5ab
Signed-off-by: Raef Coles <raef.coles@arm.com>
Create a function stm32_display_board_info() that will display ST
board information, from a parameter taken from OTP fuse. The code
is just moved from STM32MP1 part to common directory.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I9e12fe98b5aabc7791cf2c9d48a38fbf2b219f9e
The GIC v2 initialization code could be shared to other ST platforms.
The stm32mp1_gic.c file is then moved to common directory, and renamed
stm32mp_gic.c.
The functions are also prefixed with stm32mp_gic.
Change-Id: I60820823b470217d3a95cc569f941c2cb923dfa9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This backup register used to pass boot information to BL33, has the
same mapping for ST platforms. Its management can then be moved to
common directory.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ic873f099c1f87c6ba2825b4946365ae6a9687798
This driver was used when STM32MP_USE_STM32IMAGE was enabled. This flag
is now removed, so the ST io_mmc driver can now be removed.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I3c1280dec8926b921534c81e143e86cfe6d4ee0d
This includes the functions definitions, and avoids sparse warnings:
plat/st/stm32mp1/plat_image_load.c:13:6: warning:
symbol 'plat_flush_next_bl_params' was not declared.
Should it be static?
plat/st/stm32mp1/plat_image_load.c:21:16: warning:
symbol 'plat_get_bl_image_load_info' was not declared.
Should it be static?
plat/st/stm32mp1/plat_image_load.c:29:13: warning:
symbol 'plat_get_next_bl_params' was not declared.
Should it be static?
The issue was also found when enabling -Wmissing-prototypes warning:
plat/st/stm32mp1/plat_image_load.c:13:6: error:
no previous prototype for 'plat_flush_next_bl_params'
[-Werror=missing-prototypes]
13 | void plat_flush_next_bl_params(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
plat/st/stm32mp1/plat_image_load.c:21:17: error:
no previous prototype for 'plat_get_bl_image_load_info'
[-Werror=missing-prototypes]
21 | bl_load_info_t *plat_get_bl_image_load_info(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
plat/st/stm32mp1/plat_image_load.c:29:14: error:
no previous prototype for 'plat_get_next_bl_params'
[-Werror=missing-prototypes]
29 | bl_params_t *plat_get_next_bl_params(void)
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I0bb3052f6efd888462eab2fd8f18862e7fbf02b9
As the default part do nothing, all the code managing DWL buffer cache
invalidation can be under programmer flags.
This avoids running unneeded code if the flags are not enabled, and
corrects MISRA C2012-16.6:
Every switch statement shall have at least two switch-clauses.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I90d2951f9518509b3380295fb1a6ad6b9c5e551e
This corrects MISRA C2012-7.4:
A string literal shall not be assigned to an object unless the object's
type is "pointer to const-qualified char".
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I0c9f483dce9abd32647d5f5e2df72047cdd376dd
This corrects the MISRA violation C2012-12.1:
The precedence of operators within expressions should be made explicit.
This is done either by adding parentheses, or by creating dedicated
variables to ease readability.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I5e3f191ee38eca7ef634bd7542e615ab625271f6
The code managing legacy boot (without FIP) that was under
STM32MP_USE_STM32IMAGE flag is remove.
Change-Id: I04452453ed84567b0de39e900594a81526562259
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add cert_create and fiptool specific files to add the platform
addons to the generic tools.
Change-Id: Ifa600241cdf32b495cc65edccddab47c3796b77d
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add a security check to enforce the usage of TRUSTED_BOARD_BOOT
on closed device. It will guarantee the secure bootchain.
Change-Id: Id6120d0e5041e8f2d3866e5710876ec96b6d0216
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add the decryption support for STM32MP1 binaries.
Decryption is limited to the BL32 loaded images.
Limitation: STM32MP15 doesn't support the feature.
Change-Id: I96800bac7b22109f8471eb2953fc0dc269fc4fd1
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add the support of the TRUSTED_BOARD_BOOT to authenticate the loaded
FIP using platform CoT management.
It adds TBB platform definition, redefining the standard image ID in
order to decrease requested size in BL2 binary.
Authentication will use mbedTLS library for parsing certificate
configured with a platform configuration.
Change-Id: I9da66b915c5e9e9293fccfce92bef2434da1e430
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add the new definition field for authentication used in header V2
on STM32MP13.
Change-Id: Id8f0c2584ca9b74b0d21d82c9a98d286500548c4
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
