If PLATFORM_STACK_SIZE not already defined, use the default value of
PLATFORM_STACK_SIZE.
This makes the stack size value configurable for different interface
like custom packages.
Signed-off-by: Amit Nagal <amit.nagal@amd.com>
Signed-off-by: Akshay Belsare <akshay.belsare@amd.com>
Change-Id: I87e9fcbfb4c4092378b1ac0ff8fb6d084495d320
When porting TF-A to a new platform, it is essential to read the
threat model documents in conjunction with the porting guide to
understand the security responsibilities of each platform interface
to implement.
Add a note to highlight this in the porting guide.
Change-Id: Icd1e41ae4b15032b72531690dd82a9ef95ca0db5
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The porting guide is currently hosted under the 'Getting started'
section. Yet, porting the full firmware to a new platform is probably
not the first thing that one would do. Before delving into the
details, one would probably start by building the code for an emulated
platform, such as Arm FVP.
Furthermore, the porting guide is such a big and important document
that it probably deserves being visible in the main table of contents.
Thus, move it just above the list of supported platforms.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: I51b3d2a93832505ab90d73c823f06f9540e84c77
Version 1 of the translation table library is deprecated. Refer to
version 2 instead.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: I10a4ab7b346ea963345f82baff2deda267c5308d
The pull request terminology dates back from when TF-A repository was
hosted on Github. Use a terminology that is more suited to Gerrit
workflow.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: Ieecf47617ca1cdb76b9c4a83f63ba3c402b9e975
Fix on the pointer of the block memory to fill in and the number of
bytes to be set. So it can clear the exact address with exact number
of bytes.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Idb8bda446ecd4c1d85d1ec9802bdcb020904c6c1
There is a use case where kernel requested ATF to power off/on only CPU0.
However, after ATF power off/on CPU0, CPU0 did not back into the state
to wait for ATF. Instead, CPU0 continue to reentry SPL boot sequence
because CPU0 is master/primary core. This causing the system reboot from
SPL again, while the slave core still in kernel.
To resolve this, ATF is set the boot scratch register 8 bit 17 whenever
it is a request from kernel to power off/on only CPU0. So, if this boot
scratch bit is set, CPU 0 will be able to put into a state to wait for
ATF.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Ia0228c5396beaa479858f5bd02fc05139efd2423
Add runtime setup hooks (via custom_runtime_setup()) for low level
operations related to setting up the system to correct state.
Change-Id: I4af7050dba2ee2446366d482bef5f5c5dde4bddf
Signed-off-by: Amit Nagal <amit.nagal@amd.com>
Signed-off-by: Akshay Belsare <akshay.belsare@amd.com>
In order to avoid git tracking dependency files generated while
compiling tools, the .gitignore list was updated with these files.
Change-Id: I97f1ace40441353779f4f82051d66c478571df38
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Add basic CPU library code to support the Blackhawk CPU,
BlackHawk core is based out of Hunter ELP core,
so overall library code was adapted based on that.
Change-Id: I4750e774732218ee669dceb734cd107f46b78492
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Add basic CPU library code to support the Chaberton CPU,
Chaberton cores are based out of Hunter core, so overall
library code was adapted based on that.
Change-Id: I58321c77f2c364225a764da6fa65656d1bec33f1
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Just like the tspd, DRTM support pulls in a lot of code which can't fit
into SRAM with everything else the fvp is including. Luckily, testing
this feature is only done on v8.0 models, meaning all feature related
code can be excluded for this run, saving space. The benefit of doing it
this way is that the test can continue running unaltered in the interim.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Iced2089837622fea49c10ae403c653dd1f331ca3
* changes:
docs(maintainers): update NPU driver files
docs(ethos-n): update porting-guide.rst for NPU
feat(ethos-n): add separate RO and RW NSAIDs
feat(ethos-n)!: add protected NPU firmware setup
feat(ethos-n): add stream extends and attr support
feat(ethos-n): add reserved memory address support
feat(ethos-n): add event and aux control support
feat(ethos-n): add SMC call to get FW properties
refactor(ethos-n): split up SMC call handling
feat(ethos-n): add NPU firmware validation
feat(ethos-n): add check for NPU in SiP setup
feat(ethos-n)!: load NPU firmware at BL2
feat(juno): support ARM_IO_IN_DTB option for Juno
fix(fconf): fix FCONF_ARM_IO_UUID_NUMBER value
fix(fvp): incorrect UUID name in FVP tb_fw_config
fix(ethos-n): add workaround for erratum 2838783
feat(ethos-n): add support for NPU to cert_create
feat(ethos-n): add NPU support in fiptool
feat(ethos-n): add support to set up NSAID
build(fiptool): add object dependency generation
feat(ethos-n): add NPU sleeping SMC call
feat(ethos-n): add multiple asset allocators
feat(ethos-n): add reset type to reset SMC calls
feat(ethos-n): add protected NPU TZMP1 regions
build(ethos-n): add TZMP1 build flag
The top-level page for threat model documents is evidently out-dated,
as it contains text which no longer makes sense on its own. Most
likely it relates back to the days where we had a single threat model
document.
Reword it accordingly. While we are at it, explain the motivation and
structure of the documents.
Change-Id: I63c8f38ec32b6edbfd1b4332eeaca19a01ae70e9
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The PSCI function dispatcher switch/case is split up between 32-bit and
64-bit function IDs, based on bit 30 of the encoding. This bit just
encodes the maximum size of the arguments, not necessarily whether they
are used from AArch64 or AArch32. So while some functions exist in both
worlds (CPU_ON, for instance), some functions take no or only 32-bit
arguments (CPU_OFF, PSCI_FEATURES), so they only exist as a 32-bit
function call.
Commit b88a4416b5 ("feat(psci): add support for PSCI_SET_SUSPEND_MODE"
, gerrit ID Iebf65f5f7846aef6b8643ad6082db99b4dcc4bef) and commit
9a70e69e05 ("feat(psci): update PSCI_FEATURES", gerrit ID
I5da8a989b53419ad2ab55b73ddeee6e882c25554) introduced two "case"
sections for 32-bit function IDs in the 64-bit branch, which will never
trigger. The one small extra case caused the sun50i_a64 DEBUG build to
go beyond its RAM limit.
Removed the redundant switch/case blocks, to make sun50i_a64 build
again.
Change-Id: Ic65b7403d128837296a0c3af42c6f23f9f57778e
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Mikael Olsson will no longer be working with the Arm(R) Ethos(TM)-N NPU
so Ştefana Simion will take over the ownership of the driver.
Change-Id: If22bbdcb26af9bf851efc14ad96ed76c745eadfd
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
New files have been added for the Arm(R) Ethos(TM)-N NPU driver with the
addition of TZMP1 support so the files in the maintainers list have been
updated accordingly.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I3768b2ab78c117c1dd4fc03b38cf35f6811fa378
Add some missing configuration that must be done for supporting NPU on
other platforms.
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ic505ea60f73b970d0d7ded101830eb2ce8c7ab64
To be able to further restrict the memory access for the Arm(R)
Ethos(TM)-N NPU, separate read-only and read/write NSAIDs for the
non-protected and protected memory have been added to the Juno
platform's TZMP1 TZC configuration for the NPU.
The platform definition has been updated accordingly and the NPU driver
will now only give read/write access to the streams that require it.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I5a173500fc1943a5cd406a3b379e1f1f554eeda6
When the Arm(R) Ethos(TM)-N NPU driver is built with TZMP1 support, the
NPU should use the firmware that has been loaded into the protected
memory by BL2. The Linux Kernel NPU driver in the non-secure world is
not allowed to configure the NPU to do this in a TZMP1 build so the SiP
service will now configure the NPU to boot with the firmware in the
protected memory.
BREAKING CHANGE: The Linux Kernel NPU driver can no longer directly
configure and boot the NPU in a TZMP1 build. The API version has
therefore been given a major version bump with this change.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65d00f54b3ade3665d7941e270da7a3dec02281a
The SiP service for the Arm(R) Ethos(TM)-N NPU driver will now handle
setting up the address extension and attribute control for the NPU's
streams. The non-secure world will still be allowed to read the address
extension for stream0 but non-secure access to all other streams have
been removed.
The API version has been given a minor bump with this change to indicate
the added functionality.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I2b041ca4a0a2b5cd6344a4ae144f75e137c72592
The FCONF parsing of the HW_CONFIG for the Arm(R) Ethos(TM)-N NPU now
supports reading the address of the reserved memory setup for the NPU so
the address can be used in the SiP service for the NPU.
Change-Id: I0968255a966e84896b00ea935d6aa3d5232c5f7b
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
The SiP service for the Arm(R) Ethos(TM)-N NPU driver will now handle
setting up the NPU's event and aux control registers during the SMC
reset call. The aux control register will no longer be accessible by the
non-secure world.
The API version has been given a minor bump with this change to indicate
the added functionality.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I5b099e25978aa4089c384eb17c5060c5b4eaf373
When the Arm(R) Ethos(TM)-N NPU firmware is loaded by BL2 into protected
memory, the Linux kernel NPU driver cannot access the firmware. To still
allow the kernel driver to access some information about the firmware,
SMC calls have been added so it can check compatibility and get the
necessary information to map the firmware into the SMMU for the NPU.
The API version has been given a minor version bump with this change to
indicate the added functionality.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Idb076b7bcf54ed7e8eb39be80114dc1d1c45336d
Doing all the SMC call handling in a single function and using specific
names for the x1-4 parameters is no longer practical for upcoming
additions to the SiP service. Handling of the different SMC functions
have therefore been split into separate functions.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: If28da8df0f13c449d1fdb2bd9d792d818ec5e1af
When the Arm(R) Ethos(TM)-N NPU driver is built with TZMP1 support, it
will now validate the NPU firmware binary that BL2 is expected to load
into the protected memory location specified by
ARM_ETHOSN_NPU_IMAGE_BASE.
Juno has been updated with a new BL31 memory mapping to allow the SiP
service to read the protected memory that contains the NPU firmware
binary.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I633256ab7dd4f8f5a6f864c8c98a66bf9dfc37f3
The SiP service in the Arm(R) Ethos(TM)-N NPU driver requires that there
is at least one NPU available. If there is no NPU available, the driver
is either used incorrectly or the HW config is incorrect.
To ensure that the SiP service is not incorrectly used, a setup handler
has been added to the service that will validate that there is at least
one NPU available.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I8139a652f265cfc0db4a37464f39f1fb92868e10
BL2 on Juno now loads the Arm(R) Ethos(TM)-N NPU firmware into a fixed
address, using the existing image loading framework.
Includes support for TRUSTED_BOARD_BOOT, if enabled, using the firmware
content and key certificates from the FIP.
Supports the ARM_IO_IN_DTB option so can specify the firmware location
from the dtb rather than it being hardcoded to the FIP
Update makefile to automatically embed the appropriate images into the
FIP.
BREAKING CHANGE: Building the FIP when TZMP1 support is enabled in the
NPU driver now requires a parameter to specify the NPU firmware file.
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I8cd64fb20d58f8bd539facb085606213d6cead06
Add UUIDs for loadable FIP images to Juno's tb_fw_config device tree, so
that it can be built with the ARM_IO_IN_DTB option. Increase the
max-size of the tb_fw-config image accordingly, as the new entries
enlarge that image(new size is 2,116 bytes, rounded up to 2,560 =
0xA00)
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I557bca7dd32c3be084bbba11d84dfa2818cb6789
The FCONF_ARM_IO_UUID_NUMBER macro is hardcoded to the number of entries
in the `load_info` array, but this number did not match the actual
length of the array in the case that TRUSTED_BOARD_BOOT is defined, but
SPD_spmd is not defined.
This patch fixes the hardcoded length by replacing it with a more
flexible calculation which sums up the various contributing groups of
entries.
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I557bca7dd32c3be084bbba11d84dfa2818cb6790
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I557bca7dd32c3be084bbba11d84dfa2818cb6791
To workaround Arm(R) Ethos(TM)-N NPU erratum 2838783, the NPU has been
configured to allow being woken up by both secure and non-secure events
to make sure that an event always wakes up the NPU.
The API version has been given a minor version bump with this change to
indicate that this fix is included.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I429cdd6bf1e633b4dedf2e94af28937dd892a0ba
Add Juno specific Makefile to the certificate tool build. That
Makefile is included by the certificate tool Makefile to add
information about the authentication data for the
Arm(R) Ethos(TM)-N NPU's firmware binary.
Signed-off-by: Mohamed Elzahhar <Mohamed.Elzahhar@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ie4b6a1c29d73b3ed5041b57f2cd88033be18a63a
Add platform specific Makefile to add UUIDs and command options
for the Arm(R) Ethos(TM)-N NPU firmware binary and certificate
data to the FIP so that the TF-A's BL2 can later be used to load
the Arm(R) Ethos(TM)-N NPU firmware binary into memory and verify
its integrity.
Add separate driver specific include header file for the
Arm(R) Ethos(TM)-N NPU images containing UUIDs and command options
to make it easy to port the FIP support to other platforms.
Signed-off-by: Daniele Castro <daniele.castro@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I8cd64fb20d58f8bd539facb085606213d6cead05
For the TZC to allow the Arm(R) Ethos(TM)-N NPU to access the buffers
allocated in a protected memory region, it must include the correct
NSAID for that region in its transactions to the memory. This change
updates the SiP service to configure the NSAIDs specified by a platform
define. When doing a protected access the SiP service now configures the
NSAIDs specified by the platform define. For unprotected access the
NSAID is set to zero.
Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I3360ef33705162aba5c67670386922420869e331
