Move codes that previously were part of system_manager driver into
firewall driver which are more appropriate based on their functionalities.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I35e9d792f35ee7491c2f306781417a0c8faae3fd
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Refactor NOC header to be shareable across both Stratix 10 and Agilex
platforms. This patch also removes redundant NOC declarations in system
manager header file.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I6348b67a8b54c2ad19327d6b8c25ae37d25e4b4a
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
HSD #1509626040:
This patch is to add the flexibility for BL2 and BL31
to choose different UART output port at platform_def.h
using parameter PLAT_INTEL_UART_BASE
This patch also fixing the plat_helpers.S where the
UART BASE is hardcoded to PLAT_UART0_BASE. It is then
switched to CRASH_CONSOLE_BASE.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Change-Id: Iccfa7ec64e4955b531905778be4da803045d3c8f
Define FPGA_CONFIG_SIZE and FPGA_CONFIG_ADDR in
platform-specific header. This is due to different
allocated sizes between platforms.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iac4fbf4d4940cdf31834a9d4332f9292870dee76
SError and Abort are handled in Linux (EL1) instead of
EL3. This patch adds some functionality that complements the
use cases by Linux as follows:
- Provide SMC for ECC DBE notification to EL3
- Determine type of reset needed and service the request in
place of Linux
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I43d02c77f28004a31770be53599a5a42de412211
SIMICS builds have different UART configurations compared
to hardware build. Hence, this patch defines a macro to
differentiate between both.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iadecd5445e06611486ac3c6a214a6d0dc8ccd27b
This patch adds driver for Intel FPGA's Crypto Services.
These services are provided by Intel platform
Secure Device Manager(SDM) and are made accessible by
processor components (ie ATF).
Below is the list of enabled features:
- Send SDM certificates
- Efuse provision data dump
- Encryption/decryption service
- Hardware IP random number generator
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: If7604cd1cacf27a38a9a29ec6b85b07385e1ea26
This patch fixes the code issue detected by Klocwork scan. Pointer
'bl_mem_params' returned from call to function 'get_bl_mem_params_node'
may be NULL and the NULL pointer may be caused the system crash. Update
the code to assert if unexpected NULL pointer is returned.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Change-Id: I00f3132a6104618cadce26aa303c0b46b5921d5b
Request ownership and direct access to QSPI by default in BL2.
Previously, this is only done on QSPI boot mode.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ie222bbf9d719f2f70f89d4739c285efe6df4c955
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id52c0be61a30f453a551385883eaf3cbe32b04b9
For each count down of time out counter, wait for number of
miliseconds to ensure the time out duration is predictive.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: I0e92dd1ef1da0ef504ec86472cf0d3c88528930b
Ensure 'PLAT_SEC_ENTRY' is cleared during early platform
setup. This is to prevent the slave CPU cores jump to the stale
entry point after warm reset when using U-Boot SPL as first
stage boot loader.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: I3294ce2f74aa691d0cf311fa30f27f9d4fb8800a
This patch update each Intel's platform makefiles to include GICv2
makefile instead of manually sourcing individual c files. This aligns
with latest changes from commit #1322dc94f7.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib1f446a6fc578f73a9ef86f9708ddf12d7d75f48
FPGAINTF wasn't enabled when configuring pinmux. This fixes the issue.
Signed-off-by: Tien Hock Loh <tien.hock.loh@intel.com>
Change-Id: I5a6aacd504901b8f7327b2f4854b8a77d0c37019
DRVSEL and SMPLSEL needs to be set so that it can properly go into full
speed mode. This needs to be done in EL3 as the registers are secured.
Signed-off-by: Tien Hock Loh <tien.hock.loh@intel.com>
Change-Id: Ia2f348e7742ff7b76da74d392ef1ce71e2f41677
This fixes a few issues on the Agilex clock configuration:
- Set clock manager into boot mode before configuring clock
- Fix wrong divisor used when calculating vcocalib
- PLL sync configuration should be read and then written
- Wait PLL lock after PLL sync configuration is done
- Clear interrupt bits instead of set interrupt bits after configuration
Signed-off-by: Tien Hock Loh <tien.hock.loh@intel.com>
Change-Id: I54c1dc5fe9b102e3bbc1237a92d8471173b8af70
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I5c2fe3b6a667acf80c808cfec4a64059a2c9c25f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This initializes the EMAC PHY in both Stratix 10 and Agilex,
without this, EMAC PHY wouldn't work correctly.
Change-Id: I7e6b9e88fd9ef472884fcf648e6001fcb7549ae6
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Introduce support for RSU that can be initiated through SMC calls.
Added features as below:
- RSU status
- RSU update
- RSU HPS notify
- RSU get sub-partition
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I78d5a07688e43da99f03d77dfd45ffb4a78f2e4c
Platform handoff structure no longer includes boot source selection.
Hence, those settings can now be configured through socfpga_plat_def.h.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: If7ec6a03bb25156a6670ebf8f77105c370b553f6
This patch enables uboot's spl entrypoint to BL31 and also handles
secondary cpus state during cold boot.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib70ec91a3ad09a568cb66e7c1e23a2b3e460746c
Create a function to check for fpga readiness, and move the checking out
of bridge enable function.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3f473ffeffa9ce181a48977560c8bda19c6123c0
This is to make sure that bridge access in disabled before doing full
FPGA reconfiguration and turn re-enable it once the configuration
succeed.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1f42fbf04ac1625048bbdf21b8a0443464ed833d
Refactored system manager driver to be shared across both intel platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ic4d056c3d15c3152403dc11641c2452770a6162d
Refactor reset manager into intel common platform directory as it can be
shared by both Stratix 10 and Agilex. Register address and field is now
referred through macros.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Id6d50f2a2f5a6bd8d6746b84602ac17ec7f6c07a
Add bridge enablement features for each platform.
The bridge access will be enabled automatically for FPGA 1st
configuration only.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I264757b257a209e1c3c4206660f21c5d67af0d2f
Combine both peripheral and bridge non-secure access code
into a single callable function
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I38d335ed8d1e9f55d337b63cca121a473897ef70
In further patches, we wish to enable -wredundant-decls check as
part of warning flags by default.
Change-Id: I43410d6dbf40361a503c16d94ccf0f4cf29615b7
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Increase calibration delay to cater for HPS 1st mode and
reduce clear emif delay which takes too long
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1a50a5d8a6518ba085d853cb636efa07326552b4
Pull out SiP & PSCI service driver into socfpga common directory.
Remove deassert_peripheral_reset from cold reset procedure as it is not
needed.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1a0390fca6db4c89919a2a038de2a9d96c3ae4fd
Pull out mailbox driver into common area as they can be shared between
intel's socfpga platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4064de1ec668931d77abcb7804f6952b70d33716
Share socfpga private definitions and storage driver between Agilex and
Stratix 10 platform.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I6da147f4d2df4a97c505d4bbcffadf63bc3bf4a5
Pull out handoff driver to intel/soc/ common directory as they can be
shared by both Agilex and Stratix10 platform.
Share platform_def header between both Agilex and Stratix10 and store
platform specific definitions in socfpga_plat_def.h
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I8eff1afd7ee71704a36a54fad732ede4f557878d
Some of the platform (ie. Agilex) make use of CCU IPs which will only be
initialized during bl2_el3_early_platform_setup. Any operation to the
cache beforehand will crash the platform. Hence, this will provide an
option to skip the data cache invalidation upon bl2 entry at EL3
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2c924ed0589a72d0034714c31be8fe57237d1f06
Disable gic cpu interface for powered down cpu. This patch also removes
core reset during power off as core reset will be done during power on
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2ca96d876b6e71e56d24a9a7e184b6d6226b8673
Driver will calculate DDR size instead of using hardcoded value
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I642cf2180929965ef12bd5ae4393b2f3d0dcddde
To provide glitchless clock to downstream logic even if clock toggles
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I728d64d0ba3b4492125bea5b0737fc83180356f1
Extract clock information for UART, MMC & Watchdog from the clock manager
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I42d3d4ceeaf45788d457472f6ddcd3fe099f0133
Pull out common code from aarch64 and include
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4d0f5e1bb01bcdacbedf8e6c359de594239b645f
Pull out common code from agilex and stratix10
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Iddc0a9e6eccb30823d7b15615d5ce9c6bedb2abc
