Add documentation to build and run TF-A with RMM,
Linux kernel and TFTF Realm Payload.
Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>
Change-Id: I951b41a144aabe0fec16eb933d7f005a65f06fb2
We used to have a dedicated page for deprecated platforms information.
This document contained 2 pieces of information:
a) the process for deprecating a platform port;
b) the list of deprecated platforms to this day.
I think it makes more sense to move b) to the platforms ports landing
page, such that it is more visible.
This also has the nice effect to move the 'Deprecated platforms' title
as the last entry of the 'Platform ports' table of contents, like so:
- Platform ports
- 1. Allwinner ARMv8 SoCs
- 2. Arm Development Platforms
...
- 39. Broadcom Stingray
- Deprecated platforms
instead of it being lost in the middle of supported platform ports.
Regarding a), this gets moved under the "Processes & Policies" section.
More specifically, it gets clubbed with the existing platform
compatibility policy. The combined document gets renamed into a
"Platforms Ports Policy" document.
Change-Id: I6e9ce2abc68b8a8ac88e7bd5f21749c14c9a2af6
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Changing Makalu reference to the public name Cortex-A715. Also, added
a note on use of SB instruction for all CPUs supporting ENABLE_FEAT_SB.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I98bd36c684fa7ae79bd4e8e641fd73404435c202
The link to the Developer Certificate of Origin was mistakenly removed
in a patch some time ago. This change re-adds it.
Change-Id: Ia8aed055cb449cdf4c1aaeac9b81ca15099e73f5
Signed-off-by: Chris Kay <chris.kay@arm.com>
This patch adds the following changes to complete the existing
TRNG implementation:
1. Adds a feature specific scope for buildlog generation.
2. Updates the docs on the build flag "TRNG_SUPPORT" and its values.
3. Makefile update and improves the existing comments at few sections
for better understanding of the underlying logic.
Change-Id: I3f72f0ccd5c94005a2df87158cf23199d2160d37
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
- Remove mentions of Arm SGM-775 and MediaTek MT6795 platforms.
Both platform ports were deleted from TF-A source tree in the
last release (v2.7).
- Remove mention of Arm Morello platform, as it now has a dedicated
documentation page accessible from the table of contents
(see docs/plat/arm/morello/).
Change-Id: Ie3acdddab81f5589bb36114a8a766200f5b08ad4
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
SMCCCv1.3 introduces the SVE hint bit added to the SMC FID (bit 16)
denoting that the world issuing an SMC doesn't expect the callee to
preserve the SVE state (FFR, predicates, Zn vector bits greater than
127). Update the generic SMC handler to copy the SVE hint bit state
to SMC flags and mask out the bit by default for the services called
by the standard dispatcher. It is permitted by the SMCCC standard to
ignore the bit as long as the SVE state is preserved. In any case a
callee must preserve the NEON state (FPCR/FPSR, Vn 128b vectors)
whichever the SVE hint bit state.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2b163ed83dc311b8f81f96b23c942829ae9fa1b5
Add Muhammad Arsath K F in qti maintainer
Signed-off-by: Muhammad Arsath K F <quic_mkf@quicinc.com>
Change-Id: I71e6cc72b3c658730abe5255977f3b93dd7e4563
This change updates the version of the Node Version Manager suggested by
the prerequisites documentation. The NVM installation command line hint
has been replaced with the snippet provided by NVM's user guide, and the
second line now automatically installs a version of Node.js compatible
with TF-A's repository scripts.
Change-Id: I6ef5e504118238716ceb45a52083450c424c5d20
Signed-off-by: Chris Kay <chris.kay@arm.com>
Cortex-A76 erratum 2743102 is a Cat B erratum that applies to
all revisions <=r4p1 and is still open. The workaround is to
insert a dsb before the isb in the power down sequence.
SDEN documentation:
https://developer.arm.com/documentation/SDEN885749/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ie2cd73bd91417d30b5633d80b2fbee32944bc2de
Neoverse N1 erratum 2743102 is a Cat B erratum that applies to
all revisions <=r4p1 and is still open. The workaround is to
insert a dsb before the isb in the power down sequence.
SDEN documentation:
https://developer.arm.com/documentation/SDEN885747/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I81a8793c1a118764df3ac97b67f5e088f56f6a20
Update supported models list according to changes for v2.8 release in
ci/tf-a-ci-scripts repository
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ica7e062db77237220bcd861837f392496db1653a
Cortex-A710 erratum 2291219 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r2p0, and is fixed in r2p1. The workaround is to set
CPUACTLR2_EL1[36] to 1 before the power down sequence that sets
CORE_PWRDN_EN. This allows the cpu to retry the power down and prevents
the deadlock. TF-A never clears this bit even if it wakes up from the
wfi in the sequence since it is not expected to do anything but retry to
power down after and the bit is cleared on reset.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I7d3a97dfac0c433c0be386c1f3d2f2e895a3f691
Cortex-X3 erratum 2313909 is a Cat B erratum that applies to revisions
r0p0 and r1p0, and is fixed in r1p1. The workaround is to set
CPUACTLR2_EL1[36] to 1 before the power down sequence that sets
CORE_PWRDN_EN. This allows the cpu to retry the power down and prevents
the deadlock. TF-A never clears this bit even if it wakes up from the
wfi in the sequence since it is not expected to do anything but retry to
power down after and the bit is cleared on reset.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2055130/latest
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I5935b4bcd1e6712477c0d6eab2acc96d7964a35d
Neoverse-N2 erratum 2326639 is a Cat B erratum that applies to revision
r0p0 and is fixed in r0p1. The workaround is to set CPUACTLR2_EL1[36] to
1 before the power down sequence that sets CORE_PWRDN_EN. This allows
the cpu to retry the power down and prevents the deadlock. TF-A never
clears this bit even if it wakes up from the wfi in the sequence since
it is not expected to do anything but retry to power down after and the
bit is cleared on reset.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest/
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I9a325c5b9b498798e5efd5c79a4a6d5bed97c619
Platforms which implement pwr_domain_pwr_down_wfi differ substantially
in behaviour. However, different cpus require similar sequences to power
down. This patch tightens the behaviour of these platforms to end on a
wfi loop after performing platform power down. This is required so that
platforms behave more consistently on power down, in cases where the wfi
can fall through.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Ie29bd3a5e654780bacb4e07a6d123ac6d2467c1f
Threat model for EL3 SPMC.
The mitigations are based on the guidance
provided in FF-A v1.1 EAC0 spec.
Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>
Change-Id: I7f4c9370b6eefe6d1a7d1afac27e8b3a7b476072
Add documentation how to build EL3 SPMC,
briefly describes all FF-A interfaces,
SP boot flow, SP Manifest, Power Management,
Boot Info Protocol, Runtime model and state
transition and Interrupt Handling.
Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>
Change-Id: I630df1d50a4621b344a09e462563eacc90109de4
The Cortex-X3 cpu port was developed before its public release when it
was known as Makalu ELP. Now that it's released we can use the official
product name.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Iebb90cf2f77330ed848a3d61c5f6928942189c5a
* changes:
docs(imx8m): update for high assurance boot
feat(imx8m): add support for high assurance boot
feat(imx8mp): add hab and map required memory blocks
feat(imx8mn): add hab and map required memory blocks
feat(imx8mm): add hab and map required memory blocks
Arm has decided to deprecate the sgi575 and rdn1edge platforms.
The development of software and fast models for these platforms
has been discontinued. rdn1edge platform has been superseded by the
rdn2 platform, which is already supported in TF-A and CI work is
underway for this platform.
Change-Id: If2228fb73549b244c3a5b0e5746617b3f24fe771
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Add a section into documentation listing the support for High Assurance
Boot (HABv4), note on the DRAM mapping, and reference to the external
documentation.
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Change-Id: Iaca97f4ac2595e35de2664a880394519f96eca07
In anticpation of the next Trusted Firmware release update the to newest
2.x Mbed TLS library [1].
Note that the Mbed TLS project published version 3.x some time ago.
However, as this is a major release with API breakages, upgrading to
this one might require some more involved changes in TF-A, which we are
not ready to do. We shall upgrade to Mbed TLS 3.x after the v2.8 release
of TF-A.
[1] https://github.com/Mbed-TLS/mbedtls/tree/v2.28.1
Change-Id: I7594ad062a693d2ecc3b1705e944dce2c3c43bb2
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Code owners have been added for the Arm(R) Ethos(TM)-N NPU driver.
Change-Id: I0bda0d95151cdff5cd3a793c6c0e9ef6a9a5f50b
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Conceptually the DT is a hardware description, as such it's independent
from the instruction set that a DT client uses. So having separate DTs
for aarch32 and aarch64 does not make sense and is not needed.
Probably due to historic reasons (a Linux bug fixed in 2016 with Linux
commit ba6dea4f7ced, in Linux v4.8) the CPU reg property was using a
different size between aarch64 and aarch32, even though the size of it
is solely governed by the parent's #address-cells property.
Consolidate this to be always 2, and always use two cells to describe
the CPU's MPIDR register.
This removes the last difference of the -aarch32 versions of the FVP
DT files, so just remove all of them. The respective versions without
that suffix can now be used with AArch32 DT clients as well.
Also remove the respective part in the documentation.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I45d3a2cbba8e04595a741e1cf41900377952673e
Reinstate the workaround introduced in commit
9bbc03a6e0. The cited change to the SDEN
could not be found and there are no known problems with the workaround.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Iec9938f173e7565024aca798f224df339de90806
Documented steps to run DRTM implementation.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I30dd8c1088a54a8906389c2584d922862610dae0
The Arm(R) Ethos(TM)-N NPU driver now supports configuring the SMMU
streams that the NPU shall use and will therefore no longer delegate
access to these registers to the non-secure world. In order for the
driver to support this, the device tree parsing has been updated to
support parsing the allocators used by the NPU and what SMMU stream that
is associated with each allocator.
To keep track of what NPU device each allocator is associated with, the
resulting config from the device tree parsing will now group the NPU
cores and allocators into their respective NPU device.
The SMC API has been changed to allow the caller to specify what
allocator the NPU shall be configured to use and the API version has
been bumped to indicate this change.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I6ac43819133138614e3f55a014e93466fe3d5277
Neoverse Demeter CPU has been renamed to Neoverse V2 CPU.
Correspondingly, update the CPU library, file names and other
references to use the updated IP name.
Signed-off-by: Joel Goddard <joel.goddard@arm.com>
Change-Id: Ia4bf45bf47807c06f4c966861230faea420d088f
