This is the length of the U-Boot binary, which is typically 200-800KB
and certainly not larger than 4GB. Use a 32-bit value to save space in
global_data and move it up to be with fields of the same alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a function to locate this information, rather than doing it
automatically on startup, to save space in global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
This value is only really used before relocation. There is not much use
to showing its value in bdinfo, so drop it. Move it to the new boardf
struct.
Signed-off-by: Simon Glass <sjg@chromium.org>
Quite a few of the members of struct global_data are only used before
reloction, or have little meaning afterwards, yet they hang around in
struct global_data for the lifetime of U-Boot. This uses up precious
pre-relocation SRAM on many boards.
To help with this, start a new struct which exists only before
relocation. Move new_fdt into this new struct. Drop the display of it
in the 'bdinfo' command as it is probably not very useful.
Note that the field does not exist in SPL builds.
Signed-off-by: Simon Glass <sjg@chromium.org>
We don't need a full word for this boolean value. Convert it into a flag
to save space in global_data.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having every caller set this up individually, create a
common init function. This allows new fields to be added without the
risk of them being left uninited.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Define spl_set_header_raw_uboot() always so we can drop the last #ifdef
in this function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
This function has a number of unnecessary #ifdefs so remove them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Make the raw-mode options depend on SPL_SYS_MMCSD_RAW_MODE in a more
direct way. This makes it easier to understand the options with
'make menuconfig'.
There are three different ways of specifying the offset:
- sector offset
- partition number
- partition type
So make these a choice, so it is more obvious what is going on.
Update existing boards to enable SPL_SYS_MMCSD_RAW_MODE where needed.
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
These should have a CONFIG_ prefix. Add it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 7a0d88076b ("Add in the ability to load and boot an uncompr...")
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
At present spl_mmc_load() is the only caller of this function, passing
it a boot_device, an index into the available MMC devices. Pass the
device number instead, since it is known by the caller and simplifies
the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Use 'ret' as the return code, since it may not be an error and this is
the common name in U-Boot. Make sure to return the error code when
given, rather than transforming it into -1 (-EPERM).
Signed-off-by: Simon Glass <sjg@chromium.org>
This check is not needed now, since printf() resolved to nothing if not
available. Drop the #ifdefs
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Unless function names are requested, the logging system should not
compile these into the code. Adjust the macros to handle this.
This means that turning on function names at runtime won't work unless
CONFIG_LOGF_FUNC is enabled. We could perhaps split this into a
separate option if that is a problem.
Enable CONFIG_LOGF_FUNC logging for sandbox since the tests expect the
function names to be included. Fix up the pinmux test which checks a
logging statement.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Since U-Boot does not support memory overcommit we can
enforce that the allocation size is within the malloc area.
This is a simple and efficient hardening measure to mitigate
further integer overflows in dlmalloc.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Simon Glass <sjg@chromium.org>
Make sure that the new break is within mem_malloc_start
and mem_malloc_end before making progress.
ulong new = old + increment; can overflow for extremely large
increment values and memset() can get wrongly called.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Simon Glass <sjg@chromium.org>
req is of type size_t, casting it to long opens the door
for an integer overflow.
Values between LONG_MAX - (SIZE_SZ + MALLOC_ALIGN_MASK) - 1 and LONG_MAX
cause and overflow such that request2size() returns MINSIZE.
Fix by removing the cast.
The origin of the cast is unclear, it's in u-boot and ppcboot since ever
and predates the CVS history.
Doug Lea's original dlmalloc implementation also doesn't have it.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Simon Glass <sjg@chromium.org>
bootstage_get_size() returns the total size of the data structure
including associated records.
When copying from gd->bootstage, only the allocation size of gd->bootstage
must be used. Otherwise too much memory is copied.
This bug caused no harm so far because gd->new_bootstage is always
large enough and reading beyond the allocation length of gd->bootstage
caused no problem due to the U-Boot memory layout.
Fix by using the correct size and perform the initial copy directly
in bootstage_relocate() to have the whole relocation process in the
same function.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Simon Glass <sjg@chromium.org>
This is extending commit da96f93cda ("spl: binman: Disable u_boot_any
symbols for i.MX93 boards") to i.MX 8ULP boards.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Simon Glass <sjg@chromium.org> says:
Universal Payload (UPL) is an Industry Standard for firmware
components[1]. UPL is designed to improve interoperability within the
firmware industry, allowing mixing and matching of projects with less
friction and fewer project-specific implementations. UPL is
cross-platform, supporting ARM, x86 and RISC-V initially.
This series provides some initial support for this, targeting 0.9.1 and
sandbox only.
Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests
Specify the FIT and include information about each loaded image, as
required by the UPL handoff.
Write the UPL handoff into the bloblist before jumping to the next phase.
Control this using a runtime flag to avoid conflicting with other
handoff mechanisms.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add the basic code to create a handoff structure in SPL, so it can be
passed to the next phase. For now this is not plumbed in.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
This data structure provides a list of pointers / array of structures.
I was planning to use it for the lmb restructure, to allow it to
support any number of entries, but then I gave up on it.
There are quite a few places in U-Boot where such a list would be
useful, since it supports growing the array.
[...]
Example:
struct my_struct obj;
struct my_struct *ptr = alist_add(&lst, &obj, struct my_struct);
// now ptr is in the list
[trini: Reword the cover letter slightly, do not merge the RFC portion]
At present in tests it is possible to cause an out-of-memory condition
with malloc() but not realloc(). Add support to realloc() too, so code
which uses that function can be tested.
Signed-off-by: Simon Glass <sjg@chromium.org>
Paul Kocialkowski <paulk@sys-base.io> says:
Here is a bunch of configuration cleanups for OMAP boards, mostly
unifying and moving common configuration from board-specific defconfigs
to Kconfig definitions.
There's also a cleanup of the sniper (LG Optimus Black) defconfig,
prior to migrating it to DM/DT in a future follow-up series.
The maximum SPL size was defined to the same value in each OMAP3
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The SPL text base was defined to the same value in each OMAP3 board
defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
Now that sandbox is using cyclic for video, it trips the 1us time
limit. Updating the sandbox display often takes 20ms or more.
Increase the limit to 100ms to avoid a warning.
Signed-off-by: Simon Glass <sjg@chromium.org>
The cyclic subsystem is currently enabled either in all build phases
or none. For tools this should not be enabled, but since lib/shc256.c
and other files include watchdog.h in the host build, we must make
sure that it is not enabled there.
Add an SPL symbol so that there is more control of this.
Add an include into cyclic.h so that tools can include this file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Stefan Roese <sr@denx.de>
A valid memory location to stash bootstage information at will be
architecture dependent. Move the existing defaults to the main Kconfig
file for this option and set 0x0 as the default only for sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
According to recently firmware handsoff spec [1]'s "Register usage at handoff
boundary", Transfer List's signature value was changed from 0x40_b10b
(3 bytes) to 4a0f_b10b (4 bytes).
As updating of TL's signature, register value of x1/r1 should be:
In aarch32's r1 value should be
R1[23:0]: set to the TL signature (4a0f_b10b -> masked range value: 0f_b10b)
R1[31:24]: version of the register convention == 1
and
In aarch64's x1 value should be
X1[31:0]: set to the TL signature (4a0f_b10b)
X1[39:32]: version of the register convention == 1
X1[63:40]: MBZ
(See the [2] and [3]).
This patch fix problems:
1. breaking X1 value with updated specification in aarch64
- change of length of signature field.
2. previous error value set in R1 in arm32.
- length of signature should be 24, but it uses 32bit signature.
This patch is a breaking change. It works only TF-A is updated.
Link: https://github.com/FirmwareHandoff/firmware_handoff [1]
Link: https://github.com/FirmwareHandoff/firmware_handoff/issues/32 [2]
Link: 5aa7aa1d3a [3]
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Mojík <marek.mojik@nic.cz> says:
Hello all,
this is a continuation of previous work by Pali to add support for the
Turris 1.x board. As the patches were based on u-boot v2022.04, a
nontrivial rebasing was needed.
Some notes:
- Some options that are in SD defconfig are disabled in NOR defconfig
because over the years u-boot grew and the old NOR defconfig will not
fit into NOR memory.
- SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We
were not able to fix this yet)
When U-Boot is running from flash memory (execute in place) then
gd->fdt_blob before relocation points to read-only flash memory.
So U-Boot calls board_fix_fdt() with read-only gd->fdt_blob pointer which
cause immediate CPU crash when callback is trying to modify gd->fdt_blob.
Fix this issue by introducing a new config option OF_INITIAL_DTB_READONLY
which moves fix_fdt callback after the reloc_fdt callback. This makes
CONFIG_OF_BOARD_FIXUP working also if U-Boot before relocation is not
running from read/write (S)RAM memory.
This is required for mpc85xx boards when booting from flash NOR.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Before this commit, usb_get_descriptor() failed for some flakey USB
devices. We hereby adopt the more robust linux implementation [1].
For instance, for the "Alcor Micro Corp. Flash Drive" (VID 0x058f, PID
0x6387), the following behavior occurs from time to time:
=> usb start
starting USB...
Bus xhci_pci: Register 10000840 NbrPorts 16
Starting the controller
USB XHCI 1.20
scanning bus xhci_pci for devices... usb_new_device: Cannot read configuration, skipping device 058f:6387
Signed-off-by: Philip Oberfichtner <pro@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
[1] From a38297e3fb012 (Linux 6.9), see
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/usb/core/message.c?h=v6.9#n781
The dm_root_f field seems to be entirely write-only and hence
redundant, unless 'git grep' fails to find some access generated via
preprocessor token concatenation or similar.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
The dcache may not be enabled in SPL. Add a check to avoid trying to
use an undefined function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The default value CYCLIC_MAX_CPU_TIME_US was 1000, which is
a little bit too low for slower hardware and sandbox.
On my MIPS Boston FPGA board with interaptiv CPU, wdt_cyclic
can easily take 3200 us to run.
On azure pipeline sandbox_clang, wdt_cyclic some times goes
beyond 1300 us.
Raise default value to 5000, which is the value already taken
by octeon_nic32. This is still sufficent to maintain system
responsiveness.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Stefan Roese <sr@denx.de>
common:
- spl: Introduce SoC specific init function
xilinx:
- Enable FF-A and NVMEM
- Rename spl_board_init() to spl_soc_init()
zynqmp:
- DT alignments
- Enable reset from SPL
- Enable USB3 for KD240
- Align multiboot register on Kria for proper reboot
- Allow multiboot environment write even in saved environment
- Move zynqmp commands from board/ to arch/
- Clean up xilinx_zynqmp.h
versal:
- Do not prioritize boot device if driver is not enabled
versal-net:
- Setup location for redundant variables in SPI
versal2:
- Add support for new SOC
mmc:
- Fix tap delay for SD on Versal NET
spi:
- Add SPI_NOR_OCTAL_READ flag for mx66uw2g345gx0 flash part
gpio:
- Cover MODEPIN firmware dependency
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZnBfewAKCRDKSWXLKUoM
Ib/7AJ0cn3q7lMpxbSbRj33oftI8Vy8+owCeN35Nl8TN9l/DHbfusER4uVfnOVw=
=YMIB
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2024.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next
AMD/Xilinx changes for v2024.10-rc1
common:
- spl: Introduce SoC specific init function
xilinx:
- Enable FF-A and NVMEM
- Rename spl_board_init() to spl_soc_init()
zynqmp:
- DT alignments
- Enable reset from SPL
- Enable USB3 for KD240
- Align multiboot register on Kria for proper reboot
- Allow multiboot environment write even in saved environment
- Move zynqmp commands from board/ to arch/
- Clean up xilinx_zynqmp.h
versal:
- Do not prioritize boot device if driver is not enabled
versal-net:
- Setup location for redundant variables in SPI
versal2:
- Add support for new SOC
mmc:
- Fix tap delay for SD on Versal NET
spi:
- Add SPI_NOR_OCTAL_READ flag for mx66uw2g345gx0 flash part
gpio:
- Cover MODEPIN firmware dependency
Some architectures use spl_board_init() in their SoC specific
implementation. Board developers should be able to add board specific
implementation via spl_board_init(). Hence, introduce a spl_soc_init()
method which is called right before spl_board_init() for SoC
specific implementation.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20240327121153.2455126-2-lukas.funke-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
