This switches all boards with the Allwinner H616/H618/H313/H700 SoCs over to
use OF_UPSTREAM. We are doing it for this SoC family only since the DTs
between the U-Boot and the kernel repo are exactly identical, whereas other
families have one compatibility fix in U-Boot to allow booting older kernels.
Other will follow if this plays out well.
The biggest chunk otherwise is adding support for an Anbernic game console,
using the H700 SoC. For that we need to enhance the DRAM support code, and
pick two DT commits from the mainline kernel/DT rebasing repo, followed
by the defconfig patch.
On top of that two small fixes for the old Allwinner A80.
Gitlab CI passed, and I booted that briefly on some boards, including an
H616 and an H618 one (with LPDDR4).
Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Complete this rename for all directories outside arch/ board/ drivers/
and include/
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <sjg@chromium.org>
Add pinctrl nodes for the r_i2c node. Without the pinmux defined the
r_i2c bus may fail to work, possibly if the bootloader uses rsb mode
for the PMIC.
Fixes: 0d17c8651188 ("arm64: dts: allwinner: Add Allwinner H616 .dtsi file")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Fixes: 0d17c8651188 ("arm64: dts: allwinner: Add Allwinner H616 .dtsi file")
Link: https://lore.kernel.org/r/20240710231718.106894-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
[ upstream commit: 7c9ea4ab76176f65f4f55aa144f9145a4bccaacb ]
(cherry-picked from commit 1665557aa57c2140d014d68dfe1a1f92f9baac82)
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Change the Anbernic RG35XX series to use the r_i2c bus for the PMIC
instead of the r_rsb bus. This is to keep the device tree consistent
as there are at least 3 devices (the RG35XX-SP, RG28XX, and RG40XX-H)
that have an external RTC on the r_i2c bus.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://lore.kernel.org/r/20240710231718.106894-4-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
[ upstream commit: c712e5d0985628b1df13930489b49b740e610a2b ]
(cherry picked from commit 43c3a035746af3c8cad5b65055d88f1de8406823)
Reviewed-by-by: Andre Przywara <andre.przywara@arm.com>
The ROCK 5 ITX as the name suggests is made in the ITX form factor and
actually built in a form to be used in a regular case even providing
connectors for regular front-panel io.
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb PCIe-connected Ethernet NICs.
As of yet unsupported display options consist of 2*HDMI, DP via USB-c,
eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.
Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240704153815.837392-3-heiko@sntech.de
[ upstream commit: 31390eb8ffbf2b6be7d789708ec08b635d7a3eb8 ]
(cherry picked from commit 9cff9fef0a295e3b8feb7bc4116a297a842cad01)
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This includes the necessary device tree data to allow thermal
monitoring on RK3588(s) using the on-chip TSADC device, along with
trip points for automatic thermal management.
Each of the CPU clusters (one for the little cores and two for
the big cores) get a passive cooling trip point at 85C, which
will trigger DVFS throttling of the respective cluster upon
reaching a high temperature condition.
All zones also have a critical trip point at 115C, which will
trigger a reset.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20240617-rk-dts-additions-v5-1-c1f5f3267f1e@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 510cd9e688453166b2bff3999ed21cac97385bb5 ]
(cherry picked from commit 33e7079543d5eee1415b937054e8634000d1bde4)
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Rename the Rockchip RK3588 SoC dtsi files and, consequently, adjust their
contents appropriately, to prepare them for the ability to specify different
CPU and GPU OPPs for each of the supported RK3588 SoC variants.
As already discussed, [1][2][3][4] some of the RK3588 SoC variants require
different OPPs, and it makes more sense to have the OPPs already defined when
a board dts(i) file includes one of the SoC variant dtsi files (rk3588.dtsi,
rk3588j.dtsi or rk3588s.dtsi), rather than requiring the board dts(i) file
to also include a separate rk3588*-opp.dtsi file. The choice of the SoC
variant is already made by the inclusion of the SoC dtsi file into the board
dts(i) file, and it doesn't make much sense to, effectively, allow the board
dts(i) file to include and use an incompatible set of OPPs for the already
selected RK3588 SoC variant.
The new naming scheme for the RK3588 SoC dtsi files uses "-base" and "-extra"
suffixes to denote the DT data shared between all RK5588 SoC variants, and
the DT data shared between the unrestricted SoC variants, respectively.
For example, the DT data for the RK3588 includes both rk3588-base.dtsi and
rk3588-extra.dtsi, because it's an unrestricted SoC variant, while the DT
data for the RK3588S variant includes rk3588-base.dtsi only, because it's
a restricted SoC variant, feature- and interface-wise. This achieves a more
logical naming of the RK3588 SoC dtsi files, which reflects the way DT data
for the SoC variants is built by "stacking" the SoC variant features made
available through the "-base" and "-extra" SoC dtsi files. Additionally,
the SoC variant dtsi files (rk3588.dtsi, rk3588j.dtsi and rk3588s.dtsi) are
no longer parents to any other SoC variant dtsi files, which should help with
making the new "stacking" approach cleaner and easier to follow.
The RK3588 pinctrl dtsi files are also renamed in the same way, for the sake
of consistency. This also keeps the "-base" and "-extra" groups of the dtsi
files together when looked at in a directory listing, which is helpful.
The per-SoC-variant OPPs should go directly into the SoC dtsi files, if no
more than one SoC variant uses those OPPs, or be put into a separate "-opp"
dtsi file that's shared between and included from two or more SoC variant
dtsi files. An example for the former is the non-shared OPP data that should
go directly into the RK3588J SoC variant dtsi file (i.e. rk3588j.dtsi), and
an example for the latter is the shared OPP data that should be put into
rk3588-opp.dtsi and be included from the RK3588 and RK3588S SoC variant dtsi
files (i.e. rk3588.dtsi and rk3588s.dtsi, respectively). Consequently, if
the OPPs for the RK3588 and RK3588S SoC variants are ever made different,
the shared rk3588-opp.dtsi file should be deleted and the new OPPs should
be put directly into rk3588.dtsi and rk3588s.dtsi. [4]
No functional changes are introduced, which was validated by decompiling and
comparing all affected dtb files before and after these changes.
As a side note, due to the nature of introduced changes, this commit is best
viewed using the --break-rewrites option for git-log(1).
[1] https://lore.kernel.org/linux-rockchip/646a33e0-5c1b-471c-8183-2c0df40ea51a@cherry.de/
[2] https://lore.kernel.org/linux-rockchip/CABjd4Yxi=+3gkNnH3BysUzzYsji-=-yROtzEc8jM_g0roKB0-w@mail.gmail.com/
[3] https://lore.kernel.org/linux-rockchip/035a274be262528012173d463e25b55f@manjaro.org/
[4] https://lore.kernel.org/linux-rockchip/673dcf47596e7bc8ba065034e339bb1bbf9cdcb0.1716948159.git.dsimic@manjaro.org/T/#u
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/9ffedc0e2ca7f167d9d795b2a8f43cb9f56a653b.1717923308.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: def88eb4d8365a4aa064d28405d03550a9d0a3be ]
(cherry picked from commit bf8f631f62026a6b844d34c7e0549e4ec3fd4716)
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based on
the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board.
To reflect the hardware setup, add device tree sources for the SoM and
the NAS daughter board as separate files.
Hardware features:
- Rockchip RK3588 SoC
- 4GB/8GB/16GB LPDDR4x RAM
- 64GB eMMC
- MicroSD card slot
- 1x RTL8125B 2.5G Ethernet
- 4x M.2 M-Key with PCIe 3.0 x1 (via bifurcation) for NVMe SSDs
- 2x USB 3.0 (USB 3.1 Gen1) Type-A, 1x USB 2.0 Type-A
- 1x USB 3.0 Type-C with DP AltMode support
- 2x HDMI 2.1 out, 1x HDMI in
- MIPI-CSI Connector, MIPI-DSI Connector
- 40-pin GPIO header
- 4 buttons: power, reset, recovery, MASK, user button
- 3.5mm Headphone out, 2.0mm PH-2A Mic in
- 5V Fan connector, PWM beeper, IR receiver, RTC battery connector
PCIe bifurcation is used to handle all four M.2 sockets at PCIe 3.0 x1
speed. Data lane mapping in the DT is done like described in commit
f8020dfb311d ("phy: rockchip-snps-pcie3: fix bifurcation on rk3588").
This device tree includes support for eMMC, SD card, ethernet, all USB2
and USB3 ports, all four M.2 slots, GPU, beeper, IR, RTC, UART debugging
as well as the buttons and LEDs.
The GPIOs are labeled according to the schematics.
Reviewed-by: Space Meyer <git@the-space.agency>
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
Link: https://lore.kernel.org/r/20240616215354.40999-3-seb-dev@mail.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: e23819cf273c110662fdc392dcb55a75b3888609 ]
(cherry picked from commit c1a8bf31d96d890dd8328ae452fe62971ac555c2)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Xunlong Orange Pi 3B is a single-board computer based on the
Rockchip RK3566 SoC.
Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: d79d713d602e8b32cf935ddfdf61769cb74ba1dc ]
(cherry picked from commit 9defe71f2674f82c27a8d4593d8c5851ab5d51e7)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
align with other Radxa products.
- mmc0 is eMMC
- mmc1 is microSD
for ZERO 3E, there is no eMMC, but aliases should start at 0, so mmc0
is microSD as exception.
Fixes: 1a5c8d307c83 ("arm64: dts: rockchip: Add Radxa ZERO 3W/3E")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Changes in v3:
- fix syntax error in rk3566-radxa-zero-3e.dts
Changes in v2:
- microSD is mmc0 instead of mmc1 for ZERO 3E
Link: https://lore.kernel.org/r/20240620224435.2752-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 060c1950037e4c54ca4d8186a8f46269e35db901 ]
(cherry picked from commit 8324bc7493e4088013c62bc41f49d6d181575493)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Radxa ZERO 3W/3E is an ultra-small, high-performance single board
computer based on the Rockchip RK3566, with a compact form factor and
rich interfaces.
The ZERO 3W and ZERO 3E are basically the same size and model, but
differ only in storage and network interfaces.
- eMMC (3W)
- SD-card (both)
- Ethernet (3E)
- WiFi/BT (3W)
Add initial support for eMMC, SD-card, Ethernet, HDMI and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521202810.1225636-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 1a5c8d307c83c808a32686ed51afb4bac2092d39 ]
(cherry picked from commit 1476c5882f8a47b6f0f895c6424dacf6334487ae)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.
Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240627211737.1985549-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 846ef7748fa9124c8eea76e2d5e833fa69b3ef7c ]
(cherry picked from commit 5416329b387d3c13392f84ba35273a402c7010f8)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Radxa ROCK S0 is a single-board computer based on the Rockchip RK3308B
SoC in an ultra-compact form factor.
Add initial support for eMMC, SD-card, Ethernet, WiFi/BT and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521212247.1240226-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: adeb5d2a4ba47910238b3c4f5fd960cc0c26a98b ]
(cherry picked from commit e291d457b0378f2cb3d3ebb597032ca862cdb973)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Update WiFi SDIO and BT UART related props to better reflect details
about the optional onboard RTL8723DS WiFi/BT module.
Also correct the compatible used for bluetooth to match the WiFi/BT
module used on the board.
Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-14-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 12c3ec878cbe3709782e85b88124abecc3bb8617 ]
(cherry picked from commit caba73747c927b4fdccea3aeb16e077b4e6af006)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The VCCIO4 io-domain used for WiFi/BT is using 1v8 IO signal voltage.
Add io-domains node with the VCCIO supplies connected on the board.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-13-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 100b3bdee6035192f6d4a1847970fe004bb505fb ]
(cherry picked from commit f93b224359278728f01767a4701678ada9c25570)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Be explicit about the Ethernet port and define mdio and ethernet-phy
nodes in the device tree for ROCK Pi S.
Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-8-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 4b64ed510ed946a4e4ca6d51d6512bf5361f6a04 ]
(cherry picked from commit 703b8eae20eec5dbb0e52f0e1fb71e712c007dae)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
UAR0 CTS/RTS is not wired to any pin and is not used for the default
serial console use of UART0 on ROCK Pi S.
Override the SoC defined pinctrl props to limit configuration of the
two xfer pins wired to one of the GPIO pin headers.
Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-6-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 7affb86ef62581e3475ce3e0a7640da1f2ee29f8 ]
(cherry picked from commit 9c72cd5fa9f971be8ebbc1f43bd74a72e33db2fa)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add cap-mmc-highspeed to allow use of high speed MMC mode using an eMMC
to uSD board. Use disable-wp to signal that no physical write-protect
line is present. Also add vcc_io used for card and IO line power as
vmmc-supply.
Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-5-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: fc0daeccc384233eadfa9d5ddbd00159653c6bdc ]
(cherry picked from commit 39110e4bec51c9ce6bbd342234b288dbfccb9f80)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The RK3308 SoC contains a controller for one-time-programmable memory,
add a device node for it.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-9-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 36d3bbc8cdbef2f83391f7708888265ac4c37a99 ]
(cherry picked from commit db11d284200d0f811a8f8238dbc9c63daf4e6131)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Recently we are introducing multiple git subtree projects and
it is the right time to have a universal script to update
various subtrees and replace the dts/update-dts-subtree.sh.
update-subtree.sh is a wrapper of git subtree commands.
Usage: From U-Boot top directory,
run
$ ./tools/update-subtree.sh pull <subtree-name> <release-tag>
for pulling a tag from the upstream.
Or run
$ ./tools/update-subtree.sh pick <subtree-name> <commit-id>
for cherry-pick a commit from the upstream.
Currently <subtree-name> supports dts, mbedtls and lwip.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
The Jaguar SBC provides an M.2 slot connected to the pcie3 controller.
In contrast to a number of other boards the pcie-refclk is gpio-controlled,
so the necessary clock and is added to the list of pcie3 clocks.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240423074956.2622318-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 0ec7e1096332bc2b9bc881c21cfd234058f747b3 ]
(cherry picked from commit 76a89655ae740dddb57187b5b52071ed99187452)
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Marek Mojík <marek.mojik@nic.cz> says:
Hello all,
this is a continuation of previous work by Pali to add support for the
Turris 1.x board. As the patches were based on u-boot v2022.04, a
nontrivial rebasing was needed.
Some notes:
- Some options that are in SD defconfig are disabled in NOR defconfig
because over the years u-boot grew and the old NOR defconfig will not
fit into NOR memory.
- SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We
were not able to fix this yet)
When U-Boot is running from flash memory (execute in place) then
gd->fdt_blob before relocation points to read-only flash memory.
So U-Boot calls board_fix_fdt() with read-only gd->fdt_blob pointer which
cause immediate CPU crash when callback is trying to modify gd->fdt_blob.
Fix this issue by introducing a new config option OF_INITIAL_DTB_READONLY
which moves fix_fdt callback after the reloc_fdt callback. This makes
CONFIG_OF_BOARD_FIXUP working also if U-Boot before relocation is not
running from read/write (S)RAM memory.
This is required for mpc85xx boards when booting from flash NOR.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Jiaxun Yang <jiaxun.yang@flygoat.com> says:
Hi all,
This series enabled qemu-xtensa board.
For dc232b CPU it needs to be built with toolchain[1].
This is a side product of me investigating architectures
physical address != virtual address in U-Boot. Now we can
get it covered under CI and regular tests.
VirtIO devices are not working as expected, due to U-Boot's
assumption on VA == PA everywhere, I'm going to get this fixed
later.
My Xtensa knowledge is pretty limited, Xtensa people please
feel free to point out if I got anything wrong.
Thanks
[1]: https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc232b-elf.tar.gz
It is required to get it xtensa OF_UPSTREAM work.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Apart from the host-only usb3 controller (host2) the rk3588 also provides
two dual-role controllers. On the Tiger-Haikou combination these are
connected to the lower usb3-host port in host-only mode and the micro-usb3
port for dual-role operation.
Add the necessary controllers, phys to the Tiger-Haikou board and enable
the usb-id extcon.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422163951.2604273-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: d7b83921d098bd76623381f75f5cd2296f1315cc ]
(cherry picked from commit 193d3b2a0a98f2dcd8c43bcbf8a766098a9fa75d)
The Q7 standard specifies a usb-id pin on the connector to distiuish
between host and device mode. Model this via the usb-id extcon binding.
While the pin is part of the Q7 standard, so part of the module, the
extcon stays disabled in the som dtsi and will only be enabled in a
baseboard using it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422163951.2604273-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: eabb53f5dacfd643b5255f35bad30b8f914decdc ]
(cherry picked from commit 4843cec4092318ef7feb0999b0d34ef817465b33)
The comment for the host2_xhci points to the wrong port on the board.
The upper usb3 port is the correct one, so fix the comment to prevent
confusion.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422163951.2604273-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 3482efee1144262dc839792103e6a9e29defecbc ]
(cherry picked from commit 56f3031edf22d163f10bc4b631d37a9aaa82d4d4)
gpio_pwrctrl2 gets duplicated by both rk806_dvs1_null and rk806_dvs2_null
gpio_pwrctrl1 is unset. This typo appears in multiple files. Let's fix them.
Note: I haven't had the chance to test them all because I don't own all
of these boards (obviously). Please test if it's needed.
Signed-off-by: Jing Luo <jing@jing.rocks>
Link: https://lore.kernel.org/r/20240420130355.639406-1-jing@jing.rocks
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: d7f2039e5321636069baa77ef2f1e5d22cb69a88 ]
(cherry picked from commit cb2b6d1d19ed10fcaec5f5859c08a3355d1c66e0)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The association of uart2 to the q7-uart pins is part of the module
itself and not the baseboard used. Therefore move the pinctrl over
to the tiger dtsi.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422143356.2596414-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 5adbad5c464a708a87cf5ade1bfe2ca947bb2f82 ]
(cherry picked from commit f8314a4fbc00a3d651a7e9b4d9462d10c6c02a12)
The mmu600_pcie is connected with the five PCIe controllers.
The mmu600_php is connected with the USB3 controller, the GMAC
controllers, and the SATA controllers.
See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual).
The IOMMUs are disabled by default, as further patches are needed to
program the SID/SSIDs in to the IOMMUs.
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1eaf)
arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq
arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq
arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs
Additionally, the IOMMU correctly triggers an IOMMU fault when
a PCIe device performs a write (since the device hasn't been
assigned a SID/SSID):
arm-smmu-v3 fc900000.iommu: event 0x02 received:
arm-smmu-v3 fc900000.iommu: 0x0000010000000002
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
While this doesn't provide much value as is, having the devices as
disabled in the device tree will allow developers to see that the rk3588
actually has IOMMUs on the SoC.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240502140231.477049-2-cassel@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: cd81d3a0695cc54ad6ac0ef4bbb67a7c8f55d592 ]
(cherry picked from commit ea9a34aa0d786cbf4b87f1ba528e69b07219738f)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
usb2-phy should be named usb2phy according to the DT binding,
so let's fix it up accordingly.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 4e07a95f7402de092cd71b2cb96c69f85c98f251 ]
(cherry picked from commit 5a3e4638492497ae81b9bd4a8627f4727e312ccc)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Fix the ordering of the main nodes by sorting them alphabetically and
then the ones with a memory address sequentially by that address.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20240406172821.34173-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: cbb97fe18e299ece1c0074924c630de6a19b320f ]
(cherry picked from commit bbf7c16f2f1208b96349f6f6648b69cfaa1a482b)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reserve 4 kiB of space in 64bit R-Car DTs when those DTs are compiled
to permit patching in OpTee-OS /firmware node, /reserved-memory node,
possibly also additional /memory@ nodes and RPC node by TFA.
This duplicates behavior in arch/arm/dts/Makefile with OF_UPSTREAM.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
