Add support for optional arb and pmic clock for i2c provided in upstream
linux DTSI.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Upstream kernel linux use a different compatible mediatek,spi-ipm.
Add support for this compatible and add handling for the additional
clock similar to how it's done by the upstream driver and handling for
all the property enabled by default.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add MediaTek GEN3 PCIe controller support for filogic silicon.
This is adapted from the Linux version of the driver.
Signed-off-by: John Crispin <john@phrozen.org>
[ fix minor problems, fix checkpatch errors ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for PHY type switch via the mediatek topmisc syscon.
This is needed on mt7981 to make the PCIe correctly work and display
LinkUp.
Follow the same implementation done on Linux kernel with the usage of
the mediatek,syscon-type property.
Example:
u3port0: usb-phy@11e10700 {
reg = <0x11e10700 0x900>;
clocks = <&topckgen CK_TOP_USB3_PHY_SEL>;
clock-names = "ref";
#phy-cells = <1>;
mediatek,syscon-type = <&topmisc 0x218 0>;
status = "okay";
};
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/21310
- Enable SPL DTO application support for i.MX8MP DHCOM PDK2.
- Migrate imx8mn_bsh_smm_s2 and imx6ulz_bsh_smm_m2 to OF_UPSTREAM.
- Drop redundant imports with dts/upstream.
- Miscellaneous improvements for Gateworks i.MX8M boards.
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 9.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.9.2.10 "Quality of Service" in TRM[0])
Section 3.2.1 "Quality of Service (QoS)" in the TRM[0] provide more
details.
[0]: https://www.ti.com/lit/zip/spruj52
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 9.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.9.2.10 "Quality of Service" in TRM[0])
Section 3.2.1 "Quality of Service (QoS)" in the TRM[0] provide more
details.
[0]: https://www.ti.com/lit/zip/spruj28
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 7.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.10.1.2 "NB Parameters" in TRM[0])
Section 3.3.2 "Quality of Service (QoS)" in the TRM[0] provide more
details.
[0]: https://www.ti.com/lit/zip/spruil1
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
For the QOS registers, instead of using the raw values for calculation
for each reg field, use a defined macro which takes in argument for all
the reg fields to get the desired value.
Do the similar simplification for QOS register and group registers and
make the corresponding changes for am62a_qos_uboot file.
Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
QoS bit mapping are common across all K3 SoCs so move those defines
to common header file (k3_qos.h).
This ensures that we do not define these for each SoC.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Enable SPL DTO support to apply matching SoM specific DTOs to cater
for the SoM differences in DH i.MX8MP DHCOM PDK2 configuration. This
is already enabled in DH i.MX8MP DHCOM PDK3 configuration so align
the two configurations.
Fixes: ad1158c50e ("arm64: dts: imx8mp: Switch to DT overlays for i.MX8MP DHCOM SoM")
Signed-off-by: Marek Vasut <marex@denx.de>
With DM enabled, there is no need for board code to initialize
the Ethernet interfaces.
Specifically board_interface_eth_init will handle the configuration of
GPR1.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
The assigned-clock no longer have to be dropped, the clock are now
defined in clk-imx8mp.c and used by DWMAC driver to configure the
DWMAC clock. Drop the workarounds from U-Boot specific DT extras.
Having the clocks dropped causes the EQoS to be non-functional.
See commit c7ea9612df ("arm64: dts: imx8mp: Drop EQoS clock
workaround").
Fixes: 48c6f9777c ("board: gateworks: venice: add imx8mp-gw7905-2x support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
The GW74xx USB1 controller connects to a dual-role connector using a GPIO
for role detection via the usb-connector Linux driver (usb-conn-gpio.c).
This drive does not exist yet in U-Boot so for now we will just default
USB1 to host mode.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Due to supply chain issues Venice boards use either a DP83867 or a
GPY111 RGMII PHY. We already print an identifier for the DP83867 so add
one for the GPY111 to better identify what PHY is on a board:
Example:
Net: GPY111 eth0: ethernet@30be0000 [PRIME]
Net: DP83867 eth0: ethernet@30be0000 [PRIME]
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Extensive testing has shown that at higher temperatures operating
without a GSC backup battery, the GSC needs a small delay after
releasing the I2C SDA/SCL pins before it is ready to handle I2C
requests.
Add a delay to avoid errors such as:
wait_for_sr_state: Arbitration lost sr=93 cr=80 state=2020
i2c_init_transfer: failed for chip 0x20 retry=0
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
The Gateworks System Controller (GSC) has a voltage supervisor which is
disabled by default. On older boards we want to maintian this but on
newer boards we wish to enable the voltage supervisor.
The Gateworks System Controller (GSC) can disable the board primary
power supply by driving a pin to a FET high. On older board models
the leakage of the GSC may exceed the leakage of the FET causing this
signal slowly rise when the GSC battery is low and the board is in a
powered down state resulting in the board being kept in a disabled
state.
Newer boards have a hardware fix to avoid this leakage and thus should
enable the voltage supervisor.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Drop redundant header imports with dts/upstream already providing
updated headers which have been checked to be backwards compatibility.
The imx headers which aren't present in dts/upstream are as follows:
- include/dt-bindings/clock/imxrt1020-clock.h
- include/dt-bindings/clock/imx8qm-clock.h
- include/dt-bindings/clock/imxrt1170-clock.h
- include/dt-bindings/clock/imx8qxp-clock.h
- include/dt-bindings/memory/imxrt-sdram.h
- include/dt-bindings/pinctrl/pads-imx8qxp.h
- include/dt-bindings/pinctrl/pads-imx8qm.h
- include/dt-bindings/soc/imx8_pd.h
- include/dt-bindings/soc/imx_rsrc.h
hence these aren't dropped yet but there was an unused header:
- include/dt-bindings/pinctrl/pins-imx8mq.h
which has been dropped as well. There shouldn't be any funtional impact
with this change but it rather allows iMX platforms to use upstream
dt-bindings headers in a backwards compatible manner.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Migrate imx8mn_bsh_smm_s2 and imx8mn_bsh_smm_s2pro boards to OF_UPSTREAM.
Signed-off-by: Patrick Barsanti <patrick.barsanti@amarulasolutions.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Quentin Schulz <foss+uboot@0leil.net> says:
bootflow menu currently crashes U-Boot with a NULL pointer dereference
because bootflow->dev is NULL for global bootmeths (such as EFI BOOTMGR).
Therefore, let's check if the bootflow is associated with a global
bootmeth before trying to make it part of the menu.
While this makes U-Boot not crash anymore, bootflow menu doesn't work
for me (I have never had a happy path with it, but I haven't actually
tried it before today :) ) and this was basically just implemented
following Simon's suggestion sent over IRC. No clue if this is enough or
just a quick band-aid patch.
This also fixes typos in multiple places.
Michal Simek <michal.simek@amd.com> says:
Hi,
currently only DT way is supported and it is added directly to lib/smbios.c
but I think DT and env is only one way how information can be found that's
why this series is improving handling with using sysinfo driver which can
be platform specific.
At the end of day DT should be taken from smbios.c and put to sysinfo DT
driver instead of implementing it directly in this generic file.
The global bootmeths don't set the dev in bootflow struct which means
the dev_get_parent(bflow->dev) triggers a NULL-pointer dereference and
crash U-Boot.
So before trying to handle a bootflow, check that the associated
bootmeth isn't global, otherwise skip it.
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Code is pretty much supports only DT properties and completely ignore
information coming from sysinfo driver.
Code is calling smbios_add_prop() which calls with
smbios_add_prop_si(SYSINFO_ID_NONE). But SYSINFO_ID_NONE can't
differentiate different entries from sysinfo driver.
That's why introduce separate SYSINFO macros which can be used in sysinfo
driver and passed to smbios structure.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This fixes a few syntactic issues as well as typos and grammar.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
This fixes a handful of typos in various help texts in Kconfig configs.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently code looks like that it sysinfo drivers are supported but
actually none checking that system is detected. That's why call
sysinfo_detect() to make sure that priv->detected in sysinfo uclass is
setup hence information from driver can be passed to smbios.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
It is good to be aware what information is shared via smbios interface
that's why enable it by default.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add the secondary cores nodes in the dts file
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Rui Miguel Silva <rui.silva@linaro.org>
When ICSSG driver is enabled (CONFIG_TI_ICSSG_PRUETH=y) set
storage_interface and fw_dev_part env variables.
These variables need be set appropriately in order to load different
ICSSG firmwares needed for ICSSG driver. By default the storage
interface is mmc and the partition is 1:2. User can modify this based on
their needs.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Enable ICSSG driver, DP83869 phy driver, REMOTEPROC and PRU_REMOTEPROC
in am64x_evm_a53_defconfig. All these configs are needed for ICSSG
driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Jayesh Choudhary <j-choudhary@ti.com> says:
Hello there,
This series add the U-Boot support for our new platform of K3-SOC
family - J722S-EVM which is a superset of AM62P. It shares the same
memory map and thus the nodes are being reused from AM62P includes
instead of duplicating the definitions.
Some highlights of J722S SoC (in addition to AM62P SoC features) are:
- Two Cortex-R5F for Functional Safety or general-purpose usage and
two C7x floating point vector DSP with Matrix Multiply Accelerator
for deep learning.
- Vision Processing Accelerator (VPAC) with image signal processor
and Depth and Motion Processing Accelerator (DMPAC).
- 7xUARTs, 3xSPI, 5xI2C, 2xUSB2, 2xCAN-FD, 3xMMC and SD, GPMC for
NAND/FPGA connection, OSPI memory controller, 5xMcASP for audio,
4xCSI-RX for Camera, 1 PCIe Gen3 controller, USB3.0 eCAP/eQEP,
ePWM, among other peripherals.
TRM: <https://www.ti.com/lit/zip/sprujb3>
Schematics: <https://www.ti.com/lit/zip/sprr495>
Boot test log:
<https://gist.github.com/Jayesh2000/0313e58fde377f877a9a8f1acc2579ef>
Introduce basic documentation for the J722S-EVM.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Introduce the initial configs needed to support the J722S SoC family.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Include the uboot device tree files needed to boot the board.
Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Include the static DMA channel data for using DMA at SPL stage
for J722S SoC family.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Introduce the basic files needed to support the TI J722S family of SoCs.
Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Introduce the basic functions and definitions needed to properly
initialize TI J722S family of SoCs.
Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
The J722S family of SoCs uses the same DDR controller as found on the
AM62A family. Enable this option when building for the J722S family.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Include the clock and lpsc tree files needed for the wkup spl to
initialize the proper PLLs and power domains to boot the SoC.
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Add the power domain platform data entries in alphabetical order.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Use IS_ENABLED macro for the platform clock-data list and add them
in alphabetical order.
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
