mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-17 02:15:02 +00:00
arm: fsl: imx6ulz_bsh_smm_m2: Migrate to OF_UPSTREAM
Migrate imx6ulz_bsh_smm_m2 board to OF_UPSTREAM. Signed-off-by: Patrick Barsanti <patrick.barsanti@amarulasolutions.com>
This commit is contained in:
Patrick Barsanti
Fabio Estevam
parent
6d0c17024c
commit
b1ee6bcbff
4 changed files with 2 additions and 148 deletions
|
|
@ -864,7 +864,6 @@ dtb-$(CONFIG_MX6ULL) += \
|
|||
imx6ull-phytec-segin-ff-rdk-emmc.dtb \
|
||||
imx6ull-dart-6ul.dtb \
|
||||
imx6ull-somlabs-visionsom.dtb \
|
||||
imx6ulz-bsh-smm-m2.dtb \
|
||||
imx6ulz-14x14-evk.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_MX6) += \
|
||||
|
|
|
|||
|
|
@ -1,146 +0,0 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2021 BSH Hausgeraete GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "imx6ulz.dtsi"
|
||||
|
||||
/ {
|
||||
model = "BSH SMM M2";
|
||||
compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart4;
|
||||
};
|
||||
|
||||
usdhc2_pwrseq: usdhc2-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4330-bt";
|
||||
max-speed = <3000000>;
|
||||
shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
|
||||
device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg1 {
|
||||
dr_mode = "peripheral";
|
||||
srp-disable;
|
||||
hnp-disable;
|
||||
adp-disable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy1 {
|
||||
fsl,tx-d-cal = <106>;
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wlan>;
|
||||
bus-width = <4>;
|
||||
no-1-8-v;
|
||||
non-removable;
|
||||
cap-power-off-card;
|
||||
keep-power-in-suspend;
|
||||
cap-sdio-irq;
|
||||
mmc-pwrseq = <&usdhc2_pwrseq>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
};
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_gpmi_nand: gpmi-nand {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
|
||||
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
|
||||
MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
|
||||
MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
|
||||
MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
|
||||
MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
|
||||
MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
|
||||
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
|
||||
MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
|
||||
MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
|
||||
MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
|
||||
MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
|
||||
MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
|
||||
MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
|
||||
MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart3: uart3grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
|
||||
MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b099
|
||||
MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1
|
||||
MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b099
|
||||
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79 /* BT_REG_ON */
|
||||
MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x100b1 /* BT_DEV_WAKE out */
|
||||
MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 /* BT_HOST_WAKE in */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
|
||||
MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wlan: wlangrp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059
|
||||
MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10059
|
||||
MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059
|
||||
MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059
|
||||
MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059
|
||||
MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059
|
||||
MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x79 /* WL_REG_ON */
|
||||
MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x100b1 /* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */
|
||||
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b1 /* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */
|
||||
MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT 0x4001b031 /* OSC 32Khz wifi clk in */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
@ -481,6 +481,7 @@ config TARGET_MX6ULZ_SMM_M2
|
|||
select DM_MTD
|
||||
select DM_THERMAL
|
||||
select SUPPORT_SPL
|
||||
imply OF_UPSTREAM
|
||||
|
||||
config TARGET_MYS_6ULX
|
||||
bool "MYiR MYS-6ULX"
|
||||
|
|
|
|||
|
|
@ -11,7 +11,7 @@ CONFIG_ENV_SIZE=0x20000
|
|||
CONFIG_ENV_OFFSET=0x400000
|
||||
CONFIG_MX6ULL=y
|
||||
CONFIG_TARGET_MX6ULZ_SMM_M2=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="imx6ulz-bsh-smm-m2"
|
||||
CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6ulz-bsh-smm-m2"
|
||||
CONFIG_SPL_TEXT_BASE=0x00908000
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_BSS_START_ADDR=0x84100000
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue