Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
The link rule (for $(obj)/%_efi.so) in scripts/Makefile.lib handles
pulling in efi_crt0.o and efi_reloc.o so drop the 'extra' rules.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This is not actually a command so the name is confusing. Use
BOOTEFI_HELLO_COMPILE instead. Put it in the efi_loader directory
with the other such config options.
The link rule (for $(obj)/%_efi.so) in scripts/Makefile.lib handles
pulling in efi_crt0.o and efi_reloc.o so drop the 'extra' rules.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
There are currently four symbols here, so drop the word 'two'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
This is a follow-up from an earlier RFC series [1] for making the LMB
and EFI memory allocations work together. This is a non-rfc version
with only the LMB part of the patches, for making the LMB memory map
global and persistent.
This is part one of a set of patches which aim to have the LMB and EFI
memory allocations work together. This requires making the LMB memory
map global and persistent, instead of having local, caller specific
maps. This is being done keeping in mind the usage of LMB memory by
platforms where the same memory region can be used to load multiple
different images. What is not allowed is to overwrite memory that has
been allocated by the other module, currently the EFI memory
module. This is being achieved by introducing a new flag,
LMB_NOOVERWRITE, which represents memory which cannot be re-requested
once allocated.
The data structures (alloced lists) required for maintaining the LMB
map are initialised during board init. The LMB module is enabled by
default for the main U-Boot image, while it needs to be enabled for
SPL. This version also uses a stack implementation, as suggested by
Simon Glass to temporarily store the lmb structure instance which is
used during normal operation when running lmb tests. This does away
with the need to run the lmb tests separately.
The tests have been tweaked where needed because of these changes.
The second part of the patches, to be sent subsequently, would work on
having the EFI allocations work with the LMB API's.
[1] - https://lore.kernel.org/u-boot/20240704073544.670249-1-sughosh.ganu@linaro.org/T/#t
Notes:
1) These patches are on next, as the alist patches have been
applied to that branch.
2) I have tested the boot on the ST DK2 board, but it would be good to
get a T-b/R-b from the ST maintainers.
3) It will be good to test these changes on a PowerPC platform
(ideally an 85xx, as I do not have one).
All of the current definitions of arch_lmb_reserve() are doing the
same thing -- reserve the region of memory occupied by U-Boot,
starting from the current stack address to the ram_top. Introduce a
function lmb_reserve_uboot_region() which does this, and do away with
the arch_lmb_reserve() function.
Instead of using the current value of stack pointer for starting the
reserved region, have a fixed value, considering the stack size config
value.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
The early malloc region is normally quite small and is certainly less
than 4GB, so use a 32-bit value for the limit and pointer. Update the
comments for clarity while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
commit 6e2228fb05 ("Merge patch series "Clean up arm linker scripts")
was cleaning up linker scripts for armv7 and v8 but was leaving
_end and __secure_stack_start/end.
commit d0b5d9da5d ("arm: make _end compiler-generated")
was moving _end to be compiler generated. _end is defined as c variable
in its own section to force the compiler emit relative a reference.
However, defining those in the linker script will do the same thing
since [0].
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols.
It's worth noting that _image_binary_end symbol is now redundant and
can be removed in the future.
- SPL
The .end section has been removed from the new binary
[ 5] .end
PROGBITS 00000000fffdf488 000000000002f488 0
0000000000000000 0000000000000000 0 1
[0000000000000003]: WRITE, ALLOC
$~ bloat-o-meter kria_old/spl/u-boot-spl krina_new/spl/u-boot-spl
add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
Function old new delta
Total: Before=115980, After=115980, chg +0.00%
$~ readelf -sW kria_old/u-boot kria_new/u-boot | grep -w _end
12047: 000000000813a0f0 0 OBJECT GLOBAL DEFAULT 11 _end
12047: 000000000813a118 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW kria_old/spl/u-boot-spl kria_new/spl/u-boot-spl | grep -w _end
1605: 00000000fffdf488 0 OBJECT GLOBAL DEFAULT 5 _end
1603: 00000000fffdf498 0 NOTYPE GLOBAL DEFAULT 4 _end
$~ readelf -sW old/u-boot new/u-boot | grep -w _end
8847: 0000000000103710 0 OBJECT GLOBAL DEFAULT 11 _end
8847: 0000000000103738 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW old_v7/u-boot new_v7/u-boot | grep -w _end
10638: 000da824 0 OBJECT GLOBAL DEFAULT 10 _end
10637: 000da84c 0 NOTYPE GLOBAL DEFAULT 10 _end
- For both QEMU instances
$~ bloat-o-meter old/u-boot new/u-boot
add/remove: 0/0 grow/shrink: 1/0 up/down: 20/0 (20)
Function old new delta
version_string 50 70 +20
Total: Before=656915, After=656935, chg +0.00%
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
This follows the example of RISC-V where <asm/global_data.h> includes
<asm/u-boot.h> directly as "gd" includes a reference to bd_info already
and so the first must include the second anyhow. We then remove
<asm/u-boot.h> from all of the places which include references to "gd"
an so have <asm/global_data.h> already.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove <common.h> from the remainder of the files under arch/arm and
when needed add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
Allow these functions to be compiled in when CONFIG_BOOTM is enabled,
even if CONFIG_CMD_BOOTM is not.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
Ilias Apalodimas <ilias.apalodimas@linaro.org> says:
The arm linker scripts had a mix of symbols and C defined variables in an
effort to emit relative references instead of absolute ones e.g [0]. A
linker bug prevented us from doing so [1] -- fixed since 2016.
This has led to confusion over the years, ending up with mixed section
definitions. Some sections are defined with overlays and different
definitions between v7 and v8 architectures.
For example __efi_runtime_rel_start/end is defined as a linker symbol for
armv8 and a C variable in armv7.
Linker scripts nowadays can emit relative references, as long as the symbol
definition is contained within the section definition. So let's switch most
of the C defined variables and clean up the arm sections.c file.
There's still a few symbols remaining -- __secure_start/end,
__secure_stack_start/end and __end which can be cleaned up
in a followup series.
For both QEMU v7/v8 bloat-o-meter shows now size difference
$~ ./scripts/bloat-o-meter u-boot u-boot.new
add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
Function old new delta
Total: Before=798861, After=798861, chg +0.00%
The symbols seem largely unchanged apart from a difference in .bss
as well as the emited sections and object types of the affected variables.
On the output below the first value is from -next and the second comes from
-next + this patchset. The .bss_start/end sections have disappeared from
the newer binaries.
# For example on QEMU v8:
efi_runtime_start
7945: 0000000000000178 0 OBJECT GLOBAL DEFAULT 2 __efi_runtime_start
7942: 0000000000000178 0 NOTYPE GLOBAL DEFAULT 2 __efi_runtime_start
efi_runtime_stop
9050: 0000000000000d38 0 OBJECT GLOBAL DEFAULT 2 __efi_runtime_stop
9047: 0000000000000d38 0 NOTYPE GLOBAL DEFAULT 2 __efi_runtime_stop
__efi_runtime_rel_start
7172: 00000000000dc2f0 0 OBJECT GLOBAL DEFAULT 10 __efi_runtime_rel_start
7169: 00000000000dc2f0 0 NOTYPE GLOBAL DEFAULT 10 __efi_runtime_rel_start
__efi_runtime_rel_stop
7954: 00000000000dc4a0 0 OBJECT GLOBAL DEFAULT 10 __efi_runtime_rel_stop
7951: 00000000000dc4a0 0 NOTYPE GLOBAL DEFAULT 10 __efi_runtime_rel_stop
__rel_dyn_start
7030: 00000000000dc4a0 0 OBJECT GLOBAL DEFAULT 11 __rel_dyn_start
7027: 00000000000dc4a0 0 NOTYPE GLOBAL DEFAULT 11 __rel_dyn_start
__rel_dyn_end
8959: 0000000000102b10 0 OBJECT GLOBAL DEFAULT 12 __rel_dyn_end
8956: 0000000000102b10 0 NOTYPE GLOBAL DEFAULT 11 __rel_dyn_end
image_copy_start
9051: 0000000000000000 0 OBJECT GLOBAL DEFAULT 1 __image_copy_start
9048: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 1 __image_copy_start
image_copy_end
7467: 00000000000dc4a0 0 OBJECT GLOBAL DEFAULT 11 __image_copy_end
7464: 00000000000dc4a0 0 NOTYPE GLOBAL DEFAULT 11 __image_copy_end
bss_start
12: 0000000000102b10 0 SECTION LOCAL DEFAULT 12 .bss_start
8087: 0000000000000018 0 NOTYPE GLOBAL DEFAULT 1 _bss_start_ofs
8375: 0000000000102b10 0 OBJECT GLOBAL DEFAULT 12 __bss_start
8084: 0000000000000018 0 NOTYPE GLOBAL DEFAULT 1 _bss_start_ofs
8372: 0000000000102b10 0 NOTYPE GLOBAL DEFAULT 12 __bss_start
bss_end
14: 000000000010bc30 0 SECTION LOCAL DEFAULT 14 .bss_end
7683: 000000000010bc30 0 OBJECT GLOBAL DEFAULT 14 __bss_end
8479: 0000000000000020 0 NOTYPE GLOBAL DEFAULT 1 _bss_end_ofs
7680: 000000000010bbb0 0 NOTYPE GLOBAL DEFAULT 12 __bss_end
8476: 0000000000000020 0 NOTYPE GLOBAL DEFAULT 1 _bss_end_ofs
# For QEMU v7:
efi_runtime_start
10703: 000003bc 0 OBJECT GLOBAL DEFAULT 2 __efi_runtime_start
10699: 000003c0 0 NOTYPE GLOBAL DEFAULT 2 __efi_runtime_start
efi_runtime_stop
11796: 000012ec 0 OBJECT GLOBAL DEFAULT 2 __efi_runtime_stop
11792: 000012ec 0 NOTYPE GLOBAL DEFAULT 2 __efi_runtime_stop
__efi_runtime_rel_start
9937: 000c40dc 0 OBJECT GLOBAL DEFAULT 8 __efi_runtime_rel_start
9935: 000c40dc 0 NOTYPE GLOBAL DEFAULT 9 __efi_runtime_rel_start
__efi_runtime_rel_stop
10712: 000c41dc 0 OBJECT GLOBAL DEFAULT 10 __efi_runtime_rel_stop
10708: 000c41dc 0 NOTYPE GLOBAL DEFAULT 9 __efi_runtime_rel_stop
__rel_dyn_start
9791: 000c41dc 0 OBJECT GLOBAL DEFAULT 10 __rel_dyn_start
9789: 000c41dc 0 NOTYPE GLOBAL DEFAULT 10 __rel_dyn_start
__rel_dyn_end
11708: 000da5f4 0 OBJECT GLOBAL DEFAULT 10 __rel_dyn_end
11704: 000da5f4 0 NOTYPE GLOBAL DEFAULT 10 __rel_dyn_end
image_copy_start
448: 0000177c 0 NOTYPE LOCAL DEFAULT 3 _image_copy_start_ofs
11797: 00000000 0 OBJECT GLOBAL DEFAULT 1 __image_copy_start
445: 0000177c 0 NOTYPE LOCAL DEFAULT 3 _image_copy_start_ofs
11793: 00000000 0 NOTYPE GLOBAL DEFAULT 1 __image_copy_start
image_copy_end
450: 00001780 0 NOTYPE LOCAL DEFAULT 3 _image_copy_end_ofs
10225: 000c41dc 0 OBJECT GLOBAL DEFAULT 10 __image_copy_end
447: 00001780 0 NOTYPE LOCAL DEFAULT 3 _image_copy_end_ofs
10222: 000c41dc 0 NOTYPE GLOBAL DEFAULT 10 __image_copy_end
bss_start
11: 000c41dc 0 SECTION LOCAL DEFAULT 11 .bss_start
11124: 000c41dc 0 OBJECT GLOBAL DEFAULT 11 __bss_start
11120: 000c41dc 0 NOTYPE GLOBAL DEFAULT 11 __bss_start
bss_end
13: 000cbbf8 0 SECTION LOCAL DEFAULT 13 .bss_end
10442: 000cbbf8 0 OBJECT GLOBAL DEFAULT 13 __bss_end
10439: 000cbbf8 0 NOTYPE GLOBAL DEFAULT 11 __bss_end
It's worth noting that since the efi regions are affected by the change, booting
with EFI is preferable while testing. Booting the kernel only should be enough
since the efi stub and the kernel proper do request boottime and runtime
services respectively.
Something along the lines of
> virtio scan && load virtio 0 $kernel_addr_r Image && bootefi $kernel_addr_r
will work for QEMU aarch64.
Tested platforms:
- QEMU aarch64
- Xilinx kv260 kria starter kit & zynq
- QEMU armv7
- STM32MP157C-DK2
[0] commit 3ebd1cbc49 ("arm: make __bss_start and __bss_end__ compiler-generated")
[1] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
image_copy_start/end are defined as c variables in order to force the compiler
emit relative references. However, defining those within a section definition
will do the same thing since [0].
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols within
a section.
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Suggested-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Sam Edwards <CFSworks@gmail.com> # Binary output identical
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
__efi_runtime_start/end are defined as c variables for arm7 only in
order to force the compiler emit relative references. However, defining
those within a section definition will do the same thing since [0].
On top of that the v8 linker scripts define it as a symbol.
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols within
the correct section.
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Suggested-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Sam Edwards <CFSworks@gmail.com> # Binary output identical
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
commit 47bd65ef05 ("arm: make __rel_dyn_{start, end} compiler-generated")
were moving the __rel_dyn_start/end on c generated variables that were
injected in their own sections. The reason was that we needed relative
relocations for position independent code and linker bugs back then
prevented us from doing so [0].
However, the linker documentation pages states that symbols that are
defined within a section definition will create a relocatable
type with the value being a fixed offset from the base of a section [1].
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
[1] https://sourceware.org/binutils/docs/ld/Expression-Section.html
Suggested-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Sam Edwards <CFSworks@gmail.com> # Binary output identical
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
__efi_runtime_rel_start/end are defined as c variables for arm7 only in
order to force the compiler emit relative references. However, defining
those within a section definition will do the same thing since [0].
On top of that the v8 linker scripts define it as a symbol.
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols within
the correct section.
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Suggested-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Sam Edwards <CFSworks@gmail.com>
Tested-by: Sam Edwards <CFSworks@gmail.com> # Binary output identical
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
commit 3ebd1cbc49 ("arm: make __bss_start and __bss_end__ compiler-generated")
and
commit f84a7b8f54 ("ARM: Fix __bss_start and __bss_end in linker scripts")
were moving the bss_start/end on c generated variables that were
injected in their own sections. The reason was that we needed relative
relocations for position independent code and linker bugs back then
prevented us from doing so [0].
However, the linker documentation pages states that symbols that are
defined within a section definition will create a relocatable type with
the value being a fixed offset from the base of a section [1].
So let's start cleaning this up starting with the bss_start and bss_end
variables. Convert them into symbols within the .bss section definition.
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
[1] https://sourceware.org/binutils/docs/ld/Expression-Section.html
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # Qualcomm sdm845
Tested-by: Sam Edwards <CFSworks@gmail.com> # Binary output identical
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Arm's GIC-600 features a Power Register (GICR_PWRR),
which needs to be programmed to enable redistributor
operation. Power on the redistributor and wait until
the power on state is reflected by checking the bit
GICR_PWRR.RDPD == 0. While running U-Boot in EL3
without enabling this register, GICR_WAKER.ChildrenAsleep
bit is not getting cleared and loops infinitely.
This register(GICR_PWRR) must be programmed to mark the frame
as powered on, before accessing other registers in the frame.
Rest of initialization sequence remains the same.
ARM GIC-600 IP complies with ARM GICv3 architecture.
Enable this config if GIC-600 IP present.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
When booting U-Boot on board with a locked down first-stage bootloader,
we emulate the Linux boot header. By passing the U-Boot FDT through this
first-stage bootloader and retrieving it afterwards we can pre-populate
the memory nodes and other info like the KASLR address.
Add a function to export the FDT addr so that boards can use it over the
built-in FDT.
Don't check is_addr_accessible() here because we might not yet have a
valid mem_map if it's going to be populated from the FDT, let the board
do their own validation instead.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org> #qcs404
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Raymond Mao <raymond.mao@linaro.org> says:
This patch set adds/adapts a few bloblist APIs and implements Arm arch
custom function to retrieve the bloblist (aka. Transfer List) from
previous loader via boot arguments when BLOBLIST option is enabled and
all boot arguments are compliant to the register conventions defined
in the Firmware Handoff spec v0.9.
If an arch wishes to have different behaviors for loading bloblist
from the previous boot stage, it is required to implement the custom
function xferlist_from_boot_arg().
Add arch custom function to get bloblist from boot arguments.
Check whether boot arguments aligns with the register conventions
defined in FW Handoff spec v0.9.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
EFI binaries should not contain sections that are both writable and
executable. Separate the RX .text section from the RW .data section.
We currently don't created relocation sections (.rel.*) for our EFI
binaries. Anyway these would have to be converted to PE/COFF relocations.
Enumerate them under DISCARD and add a comment.
Correct the characteristics of the sections.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Change the alignment of the relocation code in EFI binaries to match page
boundaries.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The IMAGE_DLLCHARACTERISTICS_NX_COMPAT flag marks an EFI binary where
the following conditions are met [1]:
* Executable and writable sections are separated.
* The application does not run self-modifying code.
* The application uses the EFI_MEMORY_ATTRIBUTE_PROTOCOL when loading
executable code.
* The application does not assume that all memory ranges are usable.
* The stack is not expected to be executable.
The only EFI binaries U-Boot provides that do not fulfill these
requirements are the EFI app and the EFI payload.
Once we have implemented separation of writable and executable memory in
U-Boot we can use the IMAGE_DLLCHARACTERISTICS_NX_COMPAT flag to decide
if we will load an EFI binary.
[1] New UEFI CA memory mitigation requirements for signing
https://techcommunity.microsoft.com/t5/hardware-dev-center/new-uefi-ca-memory-mitigation-requirements-for-signing/ba-p/3608714
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
It may be necessary to set breakpoints etc. on a specific fault handler in SPL.
Add a Kconfig option to separate the different handlers into their own individual infinite loops.
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Adjust boot_os_fn to use struct bootm_info instead of the separate
argc, argv and image parameters. Update the handlers accordingly. Few
of the functions make use of the arguments, so this improves code size
slightly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add support for a semihosting fallback on 32-bit ARM. The assembly is
lightly adapted from the irq return code, except there is no offset
since lr already points to the correct instruction. The C side is mostly
like ARM64, except we have fewer cases to deal with.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
U-Boot runs in supervisor mode. On ARMv6 and lower, software interrupts
are taken in supervisor mode. When entering an interrupt, the link
register is set to the address of the next instruction. However, if we
are already in supervisor mode, this clobbers the link register. The
debugger can't help us, since by the time it notices we've taken a
software interrupt, the link register is already gone. Work around this
by moving the return address to another register.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
When we take a software interrupt, we are already in supervisor mode.
get_bad_stack assumes we are not in supervisor mode so it can clobber
the stack pointer. This causes us to have an invalid stack once that
macro finishes. Revert back to the get_bad_stack_swi macro which was
previously removed.
Fixes: 41623c91b0 ("arm: move exception handling out of start.S files")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Use the new SPL/TPL/VPL_SYS_MALLOC_F symbols to determine whether the
malloc pool exists.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h
Move this out of the common header and include it only where needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Since ARMv5, the clz instruction allows for efficient implementation of
ffs/fls with builtins. Until ARMv7 (with Thumb-2), this instruction is
only available in ARM mode. LTO makes it difficult to force specific
functions to be in ARM mode, as it is effectively a form of very
aggressive inlining. To work around this, fls/ffs are implemented in
assembly for ARMv5 and ARMv6 when compiling U-Boot in Thumb mode.
Overall, this saves around 75 bytes per call.
This code is synced with v5.15 of the Linux kernel.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
add support for x0-x17 registers used by the SMC calls
In SMCCC v1.2 [1] arguments are passed in registers x1-x17.
Results are returned in x0-x17.
This work is inspired from the following kernel commit:
arm64: smccc: Add support for SMCCCv1.2 extended input/output registers
[1]: https://documentation-service.arm.com/static/5f8edaeff86e16515cdbe4c6?token=
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
This reverts commit d927d1a808, reversing
changes made to c07ad9520c.
These changes do not pass CI currently.
Signed-off-by: Tom Rini <trini@konsulko.com>
add support for x0-x17 registers used by the SMC calls
In SMCCC v1.2 [1] arguments are passed in registers x1-x17.
Results are returned in x0-x17.
This work is inspired from the following kernel commit:
arm64: smccc: Add support for SMCCCv1.2 extended input/output registers
[1]: https://documentation-service.arm.com/static/5f8edaeff86e16515cdbe4c6?token=
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Default synchronous exceptions handler prints only esr and register
dump. Sometimes it requiers to see an address which caused exceptions
to understand what's going on
ARM ARM in section D13.2.41 states that FAR_EL2 will contain meanfull
value in case of ESR.EC holds 0x20, 0x21, 0x24, 0x25, 0x22, 0x34 or
0x35. Same applies for EL1.
This patch adds function whivh determine current EL, gets correct FAR
register and prints it on panic.
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
The assembly for __gnu_thumb1_case_si was taken from upstream gcc and adapted
as width suffix was removed for the add instruction [1].
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Tested-by: Tony Dinh <mibodhi@gmail.com>
[1] 4f181f9c7e/libgcc/config/arm/lib1funcs.S (L2156)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Tony Dinh <mibodhi@gmail.com>
To make sure the panic and the reset messages will go out, console flush() should be used.
Sleep periods do not work in early u-boot phase when timer driver is not initialized yet.
Reference: https://lists.denx.de/pipermail/u-boot/2023-March/512233.html
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
