This replaces dm_remove_devices_flags() calls in all boot
implementations to ensure non vital devices are consistently removed
first. All boot implementation except arch/arm/lib/bootm.c currently
just call dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL). This can result
in crashes when dependencies between devices exists. The driver model's
design document describes DM_FLAG_VITAL as "indicates that the device is
'vital' to the operation of other devices". Device removal at boot
should follow this.
Instead of adding dm_remove_devices_flags() with (DM_REMOVE_ACTIVE_ALL |
DM_REMOVE_NON_VITAL) everywhere add dm_remove_devices_active() which
does this.
Fixes a NULL pointer deref in the apple dart IOMMU driver during EFI
boot. The xhci-pci (driver which depends on the IOMMU to work) removes
its mapping on removal. This explodes when the IOMMU device was removed
first.
dm_remove_devices_flags() is kept since it is used for testing of
device_remove() calls in dm.
Signed-off-by: Janne Grunau <j@jannau.net>
The commit 7576ab2fac ("riscv: Add support for AMD/Xilinx MicroBlaze V")
added support for 32bit version. 64bit version is also available that's why
wire it up too.
DT is providing description for generic QEMU target.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The U-Boot copy of the mpfs devicetree has, in general, been neglected
somewhat in comparison to the one in Linux. Moving to OF_UPSTREAM to
keep both in sync should serve to eliminate that discrepancy.
Additionally, moving to OF_UPSTREAM will let U-Boot automatically pick
up the devicetree rework that is in progress at [1].
Link: https://lore.kernel.org/all/20241002-private-unequal-33cfa6101338@spud/ [1]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
If we take an exception before u-boot is relocated, there's a good
chance we will end up in an endless loop of exceptions because resume is
invalid until after relocation.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Align U-Boot with QEMU amd-microblaze-v-virt platform to be able to wire
it with CI.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Padmarao Begari <padmarao.begari@amd.com>
Define CBO inval and flush instructions and use those for the
dcache inval and flush operations respectively.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add insn-def.h which is similar to that in linux and contains the macros
to generate any instruction of type 'I' using the assembler's .insn
directive.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
* Messages written with log_err() should be terminated with linefeed.
* Spell device-tree with hyphen as elsewhere in U-Boot.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This patch series enables full RVVM virtual machine support which was
earlier inconveniently provided as out-of-tree patchset.
This should be cleaner than a separate board config, since both
emulators provide similar feature set.
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The SBI 3.0 specification [1] adds the following extensions:
* Firmware Features Extension
* Message Proxy Extension
Let the sbi command detect their availability.
The Firmware Features Extension is already implemented in OpenSBI.
Correct the text for the DBTR extension and move it to the same position
as in the specification.
[1] https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/vv3.0-rc1/riscv-sbi.pdf
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The dtbs: target is almost identical in all architecture Makefiles.
All architecture Makefiles include scripts/Makefile.dts . Deduplicate
the dtbs: target into scripts/Makefile.dts . No functional change.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> #qcom, OF_UPSTREAM
Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
The link rule (for $(obj)/%_efi.so) in scripts/Makefile.lib handles
pulling in efi_crt0.o and efi_reloc.o so drop the 'extra' rules.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This is not actually a command so the name is confusing. Use
BOOTEFI_HELLO_COMPILE instead. Put it in the efi_loader directory
with the other such config options.
The link rule (for $(obj)/%_efi.so) in scripts/Makefile.lib handles
pulling in efi_crt0.o and efi_reloc.o so drop the 'extra' rules.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add driver for AST2700 to initialize DRAM in SPL.
This patch also refactors the Kconfig dependency of
Aspeed DRAM drivers as some of them are shared among
the file structures of RV and ARM ISAs.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Define and parse the header of the First Mutable Code (FMC)
of AST2700 SoCs at runtime phase.
The FMC header contains the information to load prebuilt binaries
required for device initialization such as DRAM and VGA.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
AST2700 SoCs integrates a Ibex 32-bits RISC-V core as the boot MCU
for the first stage bootloader execution, namely SPL.
This patch implements the preliminary base to successfully run SPL
on this RV32-based MCU to the console banner message.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The _image_binary_end symbol was aligned to the 8-bytes boundary.
However, the SPL device tree (u-boot-spl.dtb) is concatenated right
after the binary (u-boot-spl-nodtb.bin) wihtout the consideration of
the 8-bytes alignment restriction.
After then, for the SPL_SEPARATE_BSS case, fdtdec_setup() searching
for the DTB by _image_binary_end will return the "Missing DTB" error.
As the real DTB starting point does not align to a 8-bytes address
like _image_binary_end does.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add prompt for STACK_SIZE_SHIFT to make it configurable.
The default value remains 14 as usual.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Make the Atomic (A) ISA extension selectable. Thus CPUs such as
Ibex without the A extension can be supported.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Replace device clocks with real clocks from the clock controller, and
remove dummy clocks.
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
If an exception occurs in main U-Boot, show the registers. This makes
analyzing crashes especially in external applications easier.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
To minimize SPL size it is reasonable to disable SHOW_REGS. For main U-Boot
the size restrictions are much more relaxed.
* Provide separate Kconfig symbols for SPL and main U-Boot.
* Add a help text.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The CONFIG_SPL_FRAMEPOINTER symbol is only relevant in SPL.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Ben Dooks <ben.dooks@codethink.co.uk>
These seem to be missing, and trying to build fastboot cmd without
them is causing errors due to these being missing.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Tested-by: E Shattow <lucent@gmail.com
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
All of the current definitions of arch_lmb_reserve() are doing the
same thing -- reserve the region of memory occupied by U-Boot,
starting from the current stack address to the ram_top. Introduce a
function lmb_reserve_uboot_region() which does this, and do away with
the arch_lmb_reserve() function.
Instead of using the current value of stack pointer for starting the
reserved region, have a fixed value, considering the stack size config
value.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
Commit 7400d34ba9 ("riscv: semihosting: replace inline assembly with
assembly file") reduced the alignment of function smh_trap().
As described in the "RISC-V Semihosting" specification [1] the ssli,
ebreak, and srai statements must all reside in the same memory page.
[1] RISC-V Semihosting, Version 0.4, 12th June 2024
https://github.com/riscv-non-isa/riscv-semihosting
Fixes: 7400d34ba9 ("riscv: semihosting: replace inline assembly with assembly file")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The firmware invoking main U-Boot uses
* a0 to pass the boot hart
* a1 to pass a device-tree
Let the bdinfo command print this information, e.g.
boot hart = 0x000000000000001b
firmware fdt= 0x0000000087e00000
The firmware fdt field will only be printed if it is non-zero.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Use CSR_UCCTLCOMMAND instead of CSR_MCCTLCOMMAND
to do cache flush operation in M-mode and S-mode.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Cache could be enabled in harts_early_init board-specific hook,
so remove cache enablement in start.S
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
* We already have a header 'backtrace', there is no need to repeat the
word backtrace on every line.
* Add a blank line before the backtrace section of the crash report for
improved readability.
* If U-Boot is compiled without backtrace, there is no need to write a
message at all.
* Avoid #ifdef. We prefer functions to always be compiled and let
the linker remove them if not needed.
* Foresee 3 digits for the backtrace index.
For testing the 'exception' command can be used.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The EEPROM provides information about the size of the eMMC.
Provide a new function get_mmc_size_from_eeprom() to read it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E. Shattow <lucent@gmail.com>
This follows the example of RISC-V where <asm/global_data.h> includes
<asm/u-boot.h> directly as "gd" includes a reference to bd_info already
and so the first must include the second anyhow. We then remove
<asm/u-boot.h> from all of the places which include references to "gd"
an so have <asm/global_data.h> already.
Signed-off-by: Tom Rini <trini@konsulko.com>
Rename spl_soc_init() to spl_dram_init() because the generic function
name does not reflect what the function actually does. Also
spl_dram_init() is commonly used for dram initialization and should be
called from board_init_f().
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Rename spl_soc_init() to spl_dram_init() because the generic function
name does not reflect what the function actually does. Also
spl_dram_init() is commonly used for dram initialization and should be
called from board_init_f().
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add spi nor flash controller node for cv18xx SoCs
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
OpenSBI has implemented the Supervisor Software Events Extension.
Allow detecting it in the sbi command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The instruction and data cache line sizes of Andes core
are 64-byte. Select SYS_CACHE_SHIFT_6 for RISCV_NDS so
the SYS_CACHELINE_SIZE is enabled with a default value.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
