Increase the size of cactus-tertiary partition to match update in
manifest. Part of effort to use cactus-tertiary partition in StMM/HOB
testing.
Dependent on
https://review.trustedfirmware.org/c/TF-A/tf-a-tests/+/35383
Signed-off-by: Kathleen Capella <kathleen.capella@arm.com>
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: I5b91400848e2cf5d04d1c7442874a7a4b9847399
To enable device memory sharing test make memory region for UART0
and 1 a NS device region so that it can be shared by tf-a-tests
to the cactus SP.
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Change-Id: Iadfe02a65f5d4a8b60296f07c4943dd31f201453
This extends the SPM's NS ranges for linux to do
the RXTX map.
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: I99b4f2c0355edb88be2484b445b97701e166cbfd
Device memory region specified in an SP manifest are now validated
against the device memory defined in the SPMC manifest. Therefore
we need to add the device memory used in the tf-a-tests to the SPMC
manifests.
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Change-Id: I47376e67c700705d12338d7078292618a15d5546
Bump the required FF-A version in framework and manifests to v1.2 as
upstream feature development goes.
Signed-off-by: Kathleen Capella <kathleen.capella@arm.com>
Change-Id: I09d936d4aad89965cfd13f58741d647223b63a34
This patch introduces an SiP SMC call for FVP platform to set an
interrupt pending. This is needed for testing purposes.
Change-Id: I3dc68ffbec36d90207c30571dc1fa7ebfb75046e
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
The SPMC (Hafnium) looks for secure and non-secure ranges
in its manifest.
Those relate with ranges that can be used by SPs in their
FF-A manifests.
The NS memory that is not used by SPs will be assigned
to the NWd, for it to share memory with SPs as needed.
Thus, this limits the memory the NWd can share with SPs,
to prevent NWD VMs from sharing memory that belongs
to other critical components.
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: Iad03eb138a57068fbb18c53141bdf6bf9c171b28
Add the TPM event log node to the SPMC manifest such that the TF-A
measured boot infrastructure fills the properties with event log address
for components measured by BL2 at boot time.
For a SPMC there is a particular interest with SP measurements.
In the particular case of Hafnium SPMC, the tpm event log node is not
yet consumed, but the intent is later to pass this information to an
attestation SP.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ic30b553d979532c5dad9ed6d419367595be5485e
Bump the required FF-A version in framework and manifests to v1.1 as
upstream feature development goes.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I89b2bd3828a13fc4344ccd53bc3ac9c0c22ab29f
The partition layout description JSON file generated by TF-A tests
declares a fourth test partition called Ivy demonstrating the
implementation of a S-EL0 partition supported by a S-EL1 shim.
Change-Id: If8562acfc045d6496dfdb3df0524b3a069357f8e
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
The FF-A v1.0 spec allows two configurations for the number of EC/vCPU
instantiated in a Secure Partition:
-A MultiProcessor (MP) SP instantiates as many ECs as the number of PEs.
An EC is pinned to a corresponding physical CPU.
-An UniProcessor (UP) SP instantiates a single EC. The EC is migrated to
the physical CPU from which the FF-A call is originating.
This change permits exercising the latter case within the TF-A-tests
framework.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I7fae0e7b873f349b34e57de5cea496210123aea0
The primary VM concept is removed from the SPMC.
Update the SPMC manifests with number of Execution Contexts
and SP workspace size for the first Secure Partition (as it
is done for NWd secondary VMs and other SPs).
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I3b9c52666f7dfe74ab1f7d2148ad0070ee44b54e
The chosen node is no longer required as the SPMC implements
a specific boot flow which no longer requires this node.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ib566b602a7f83003a1b2d0ba5f6ebf4d8b7a9156
The PVM concept is removed from the SPMC so the device-memory
node which is specifying the device memory range for the PVM
is no longer applicable.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: If0cb956e0197028b24ecb78952c66ec454904516
For the first partition, mark first 2GB as device memory excluding
the Trusted DRAM region reserved for the SPMC.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I3ff110b3facf5b6d41ac2519ff6ca5e30a0a502b
According to [1] and in context of FF-A v1.0 a secure partition must
have either one EC (migratable UP) or a number of ECs equal to the
number of PEs (pinned MP). Adjust the SPMC manifest such that the
number of ECs is equal to the number of PEs.
[1] https://trustedfirmware-a.readthedocs.io/en/latest/components/
secure-partition-manager.html#platform-topology
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ie8c7d96ae7107cb27f5b97882d8f476c18e026d4
Add information about the third partition so it can be loaded into SPM
when running the tests
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I5544e88df391ef294ddf6b5750d468d3e74892b1
SPCI is renamed as PSA FF-A which stands for Platform Security
Architecture Firmware Framework for A class processors.
This patch replaces the occurrence of SPCI with PSA FF-A(in documents)
or simply FFA(in code).
Change-Id: I4ab10adb9ffeef1ff784641dfafd99f515133760
Signed-off-by: J-Alves <joao.alves@arm.com>
When using the SPM Dispatcher, the SPMC sits as a BL32 component
(BL32_IMAGE_ID). The SPMC manifest is passed as the TOS fw config
component (TOS_FW_CONFIG_ID). It defines platform specific attributes
(memory range and physical CPU layout) as well as the attributes for
each secure partition (mostly load address). This manifest is passed
to the SPMC on boot up. An SP package contains the SP dtb in the SPCI
defined partition manifest format. As the SPMC manifest was enriched
it needs an increase of tos_fw-config max-size in fvp_fw_config dts.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ia1dce00c6c4cbaa118fa56617980d32e2956a94e
This patch introduces the `SPCI_ID_GET` interface which will return the
ID of the calling SPCI component. Returns 0 for requests from the
non-secure world and the SPCI component ID as specified in the manifest
for secure world requests.
Change-Id: Icf81eb1d0e1d7d5c521571e04972b6e2d356e0d1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Added SPMD_SPM_AT_SEL2 build command line parameter.
Set to 1 to run SPM at S-EL2.
Set to 0 to run SPM at S-EL1 (pre-v8.4 or S-EL2 is disabled).
Removed runtime EL from SPM core manifest.
Change-Id: Icb4f5ea4c800f266880db1d410d63fe27a1171c0
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
This patch repurposes the TOS FW configuration file as the manifest for
the SPM core component which will reside at the secure EL adjacent to
EL3. The SPM dispatcher component will use the manifest to determine how
the core component must be initialised. Routines and data structure to
parse the manifest have also been added.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: Id94f8ece43b4e05609f0a1d364708a912f6203cb
