BL31 will need to access a device tree for several configurations (UART,
GIC, OTP mapping...).
Create a BL31 device tree (SOC_FW_CONFIG). It is loaded in DDR, in a
spare area.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: I320a05859e1aa3dd8db9a274e7201075a8c250c2
This feature is enabled by default using STM32MP_DDR_FIP_IO_STORAGE.
DDR firmware binary is loaded from FIP to SRAM1 which needs to be
mapped.
Only half of the SRAM1 will be allocated to TF-A.
RISAB3 has to be configured to allow access to SRAM1.
Add image ID and update maximum number on platform side also.
Fill related descriptor information, add policy and update numbers.
DDR_TYPE variable is used to identify binary file, and image is now
added in the fiptool command line.
The DDR PHY firmware is not in TF-A repository. It can be found at
https://github.com/STMicroelectronics/stm32-ddr-phy-binary
To ease the selection of the firmware path, STM32MP_DDR_FW_PATH is added
to platform.mk file.
Change-Id: I09ab0a5c63406055a7b5ccd16d65e443de47ca2f
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
As the file is common with STM32MP1, which is AARCH32, the BL31 entry
is put under __aarch64__ flag.
Change-Id: I1efc406717842235264dc6cc3605229659364b02
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Add the NAND use case in FWU boot. Like the NOR, NAND FWU won't use
a real partition UUID to find the correct FIP, but the UUID from
metadata will correspond with a hardcoded offset in the NAND.
Implement the plat_try_next_boot_source to load
backup partition on specific device.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I1dc544c479743d0ca2aace6e8214813d75637f50
Refactor the SDCARD/EMMC FWU, to add the NOR-SPI use case.
SPI-NOR FWU won't use a real partition uuid to find the correct FIP,
but the UUID from metadata will correspond with a hardcoded offset in
the NOR.
While at it change some __unused keywords to __maybe_unused to ease
checkpatch.pl analysis.
Signed-off-by: Frank Bodammer <frank.bodammer@siemens.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2fe56ba8534a3c5dfaf8aeb16e7b286909883cc2
This issue was triggered by sparse tool:
plat/st/common/stm32mp_fconf_io.c:31:17: warning:
symbol 'metadata_block_spec' was not declared. Should it be static?
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I283d15792ed0e7ac5181e18aaf54010a0e61b370
Add the decryption support for STM32MP1 binaries.
Decryption is limited to the BL32 loaded images.
Limitation: STM32MP15 doesn't support the feature.
Change-Id: I96800bac7b22109f8471eb2953fc0dc269fc4fd1
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add the support of the TRUSTED_BOARD_BOOT to authenticate the loaded
FIP using platform CoT management.
It adds TBB platform definition, redefining the standard image ID in
order to decrease requested size in BL2 binary.
Authentication will use mbedTLS library for parsing certificate
configured with a platform configuration.
Change-Id: I9da66b915c5e9e9293fccfce92bef2434da1e430
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add support for reading the FWU metadata partition. The metadata
partition stores information on the current active bank along with
information on all the FWU updatable images on the platform. This
information is then used to identify the image to be booted.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I66bc5ac718c21a49c504e698b5b1f5c4daed2d08
Add GUID's for identifying the firmware image type. With the FWU
multi bank boot feature enabled, these GUID values are used to
identify the firmware image to be booted. This is done by matching
GUID values of images in the io policy table with the Image GUID value
that is read from the FWU metadata structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Id9751f02f95fc48ef68e4e3f9f0ddbf6d6319d3c
