To allow for generic handling of a wakeup, this hook is no longer
expected to call wfi itself. Update the name everywhere to reflect this
expectation so that future platform implementers don't get misled.
Change-Id: Ic33f0b6da74592ad6778fd802c2f0b85223af614
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Add the anamix PLL override setting for DSM mode support,
so that the PLL can be power down in DSM mode to save power.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ibe954bc7c4a7b453ace13f8e4b6a335e6d4856c3
This new workaround takes advantage of the per core IMR
registers in GPC in order to unmask the IRQ0, still generated
by the 12bit in IOMUX_GPR register (which now remains always set),
so it can only wake up one core at the time.Also, this entire
workaround has now been moved here in TF-A, allowing the kernel
side to be minimal.
Another advantage this workaround brings is the removal of the
50us delay (which was necessary before in gic_raise_softirq in
kernel) by allowing the core that is waking up to mask his own
IRQ0 in the suspend finish callback.
One important change here is the way the cores are woken up in
dram_dvfs_handler. Since the wake up mechanism has changed from
asserting the 12th bit in IOMUX_GPR and leaving the IMR1 1st bit
on for each core to exactly the reverse, that is, leaving the
IOMUX_GPR 12th bit always set and then masking/unmasking the IMR1
1st bit for each independent core, we need to use the imx_gpc_core_wake
to wake up the cores.
Also, the 50us udelay is moved to TF-A (inside imx_pwr_domain_off)
from kernel(gic_raise_softirq), since the new cpuidle workaround
does not need it in order to clean the IOMUX_GPC 12bit. For now,
the udelay seems to be still needed in order to delay the affinity
info OFF for the dying core. This is something that needs further
investigation.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I9f17ff6fc3452b8225a50b232964712aafeab78a
Add the dram retention support for i.MX8MQ. As there is
no enough ocram space available before entering TF-A,
so the timing info need to be copied from dram into ocram.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Id8264c342fd62e297b1969cba5ed505450c78a25
Enable PIE support so the BL31 firmware can be loaded from anywhere
within the OCRAM (SRAM). For the PIE support we only need to replace
the BL31_BASE define by the BL31_START symbol which is a relocatable
and we need to enable it by setting ENABLE_PIE := 1.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Change-Id: Ie6a13e4ae0fdc6627a94798d7a86df7d5b310896
Add imx_system_reset2 which extends existing SYSTEM_RESET. It provides
architectural reset definitions and vendor-specific resets.
By default warm reset is triggered.
Also refactor existing implementation of wdog reset, add details about
each flag used.
Change-Id: Ia7348c32c385f1c61f8085776e81dd1e38ddda5c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
for the i.MX8M SOCs, part of the code for gpc
and PSCI implementation can be reused and make it
common for all these SoCs. this patch extracts
the common part for reuse.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a2 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
i.MX8MQ is new SOC of NXP's i.MX8M family based on
A53. It can provide industry-leading audio, voice
and video processing for applications that scale
from consumer home audio to industrial building
automation and mobile computers
this patchset add the basic supoort to boot up
the 4 X A53. more feature will be added later.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
