Updated crypto module to include crypto calls necessary for a
DRTM supported build.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Change-Id: I4f945997824393f46864b7fb7fd380308a025452
This change mitigates against read-only data being used for malicious
execution on platforms utilizing the RME/CCA.
Change-Id: I0068535aeaa5d2515c7c54ee0dc19200c7a86ba5
Signed-off-by: Chris Kay <chris.kay@arm.com>
RAS_TRAP_LOWER_EL_ERR_ACCESS was used to prevent access to RAS error
record registers (RAS ERR* & RAS ERX*) from lower EL's in any security
state. To give more fine grain control per world basis re-purpose this
macro to RAS_TRAP_NS_ERR_REC_ACCESS, which will enable the trap only
if Error record registers are accessed from NS.
This will also help in future scenarios when RAS handling(in Firmware
first handling paradigm)can be offloaded to a secure partition.
This is first patch in series to refactor RAS framework in TF-A.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ifa7f60bc8c82c9960adf029001bc36c443016d5d
FEAT_RNG_TRAP introduces support for EL3 trapping of reads of the
RNDR and RNDRRS registers, which is enabled by setting the
SCR_EL3.TRNDR bit. This patch adds a new build flag
ENABLE_FEAT_RNG_TRAP that enables the feature.
This feature is supported only in AArch64 state from Armv8.5 onwards.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: Ia9f17aef3444d3822bf03809036a1f668c9f2d89
Commit f7ec31db2d ("Disable PIE compilation option") allowed building a
non-relocatable firmware with a default-PIE toolchain by disabling PIE
at compilation time. This prevents the compiler from generating
relocations against a GOT.
However, when a default-PIE GCC is used as the linker, the final binary
will still be a PIE, containing an (unused) GOT and dynamic symbol
table. These structures do not affect execution, but they waste space in
the firmware binary. Disable PIE at link time to recover this space.
Change-Id: I2be7ac9c1a957f6db8d75efe6e601e9a5760a925
Signed-off-by: Samuel Holland <samuel@sholland.org>
Adding interface for stand-alone semantic version of TF-A
for exporting to RSS attestation, and potentially other areas
as well.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ib4a2c47aa1e42a3b850185e674c90708a05cda53
Currently the SVE code hard codes a maximum vector length of 512 bits
when configuring SVE rather than the architecture supported maximum.
While this is fine for current physical implementations the architecture
allows for vector lengths up to 2048 bits and emulated implementations
generally allow any length up to this maximum.
Since there may be system specific reasons to limit the maximum vector
length make the limit configurable, defaulting to the architecture
maximum. The default should be suitable for most implementations since
the hardware will limit the actual vector length selected to what is
physically supported in the system.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I22c32c98a81c0cf9562411189d8a610a5b61ca12
This change adds "FEAT_TRBE" to be part of feature detection mechanism.
Previously feature enablement flags were of boolean type, containing
either 0 or 1. With the introduction of feature detection procedure
we now support three states for feature enablement build flags(0 to 2).
Accordingly, "ENABLE_TRBE_FOR_NS" flag is now modified from boolean
to numeric type to align with the feature detection.
Change-Id: I53d3bc8dc2f6eac63feef22dfd627f3a48480afc
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
This change adds "FEAT_BRBE" to be part of feature detection mechanism.
Previously feature enablement flags were of boolean type, possessing
either 0 or 1. With the introduction of feature detection procedure
we now support three states for feature enablement build flags(0 to 2).
Accordingly, "ENABLE_BRBE_FOR_NS" flag is now modified from boolean
to numeric type to align with the feature detection.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I1eb52863b4afb10b808e2f0b6584a8a210d0f38c
GCC 11 and Clang 14 now use the DWARF 5 standard by default however
Arm-DS currently only supports up to version 4. Therefore, for debug
builds, ensure the DWARF 4 standard is used.
Also update references for Arm DS-5 to it's successor Arm-DS (Arm
Development Studio).
Change-Id: Ica59588de3d121c1b795b3699f42c31f032cee49
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Added DRTM support build option in the makefiles.
This build option will be used by the DRTM implementation
in the subsequent patches.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Signed-off-by: Lucian Paul-Trifu <lucian.paultrifu@gmail.com>
Change-Id: I15366f86b3ebd6ab2ebcb192753015d547cdddee
Introduce PLAT_RSS_NOT_SUPPORTED build config to
provide a mocked version of PSA APIs. The goal is
to test the RSS backend based measured boot and
attestation token request integration on such
a platform (AEM FVP) where RSS is otherwise
unsupported. The mocked PSA API version does
not send a request to the RSS, it only returns
with success and hard-coded values.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: Ice8d174adf828c1df08fc589f0e17abd1e382a4d
* changes:
fix(sptool): update Optee FF-A manifest
feat(sptool): delete c version of the sptool
feat(sptool): use python version of sptool
feat(sptool): python version of the sptool
refactor(sptool): use SpSetupActions in sp_mk_generator.py
feat(sptool): add python SpSetupActions framework
This patch enables access to the branch record buffer control registers
in non-secure EL2 and EL1 using the new build option ENABLE_BRBE_FOR_NS.
It is disabled for all secure world, and cannot be used with ENABLE_RME.
This option is disabled by default, however, the FVP platform makefile
enables it for FVP builds.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I576a49d446a8a73286ea6417c16bd0b8de71fca0
It is not always the case that RESET_TO_BL31 enabled platforms don't
execute a bootloader before BL31.
For those use cases, being able to receive arguments from that first
loader (i.e: a DTB with TPM logs) might be necessary feature.
This code has been validated on iMX8mm.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Change-Id: Ibf00c3867cb1d1012b8b376e64ccaeca1c9d2bff
* changes:
feat(spmc): add support for direct req/resp
feat(spmc): add support for handling FFA_ERROR ABI
feat(spmc): add support for FFA_MSG_WAIT
feat(spmc): add function to determine the return path from the SPMC
feat(spmd): enable handling of FF-A SMCs with the SPMC at EL3
feat(spmd): update SPMC init flow to use EL3 implementation
feat(spmc): add FF-A secure partition manager core
feat(spmc): prevent read only xlat tables with the EL3 SPMC
feat(spmc): enable building of the SPMC at EL3
refactor(spm_mm): reorganize secure partition manager code
The current implementation uses plat_arm API under generic code.
"plat_arm" API is a convention used with Arm common platform layer
and is reserved for that purpose. In addition, the function has a
weak definition which is not encouraged in TF-A.
Henceforth, removing the weak API with a configurable macro "TWED_DELAY"
of numeric data type in generic code and simplifying the implementation.
By default "TWED_DELAY" is defined to zero, and the delay value need to
be explicitly set by the platforms during buildtime.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I25cd6f628e863dc40415ced3a82d0662fdf2d75a
Introduce build flag for enabling the secure partition
manager core, SPMC_AT_EL3. When enabled, the SPMC module
will be included into the BL31 image. By default the
flag is disabled.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I5ea1b953e5880a07ffc91c4dea876a375850cf2a
We no longer need to pass special flags to the device tree compiler
for measured boot. These are a left over from the days where we used
to pass BL2 measurement to BL2 image via TB_FW configuration file.
This should have been removed as part of commit eab78e9ba4
("refactor(measured_boot): remove passing of BL2 hash via device
tree") but was missed at the time.
Change-Id: Iced7e60af7ca660c342c0fc3a33b51865d67f04d
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This patch adds architectural features detection procedure to ensure
features enabled are present in the given hardware implementation.
It verifies whether the architecture build flags passed during
compilation match the respective features by reading their ID
registers. It reads through all the enabled feature specific ID
registers at once and panics in case of mismatch(feature enabled
but not implemented in PE).
Feature flags are used at sections (context_management,
save and restore routines of registers) during context switch.
If the enabled feature flag is not supported by the PE, it causes an
exception while saving or restoring the registers guarded by them.
With this mechanism, the build flags are validated at an early
phase prior to their usage, thereby preventing any undefined action
under their control.
This implementation is based on tristate approach for each feature and
currently FEAT_STATE=0 and FEAT_STATE=1 are covered as part of this
patch. FEAT_STATE=2 is planned for phase-2 implementation and will be
taken care separately.
The patch has been explicitly tested, by adding a new test_config
with build config enabling majority of the features and detected
all of them under FVP launched with parameters enabling v8.7 features.
Note: This is an experimental procedure and the mechanism itself is
guarded by a macro "FEATURE_DETECTION", which is currently being
disabled by default.
The "FEATURE_DETECTION" macro is documented and the platforms are
encouraged to make use of this diagnostic tool by enabling this
"FEATURE_DETECTION" flag explicitly and get used to its behaviour
during booting before the procedure gets mandated.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: Ia23d95430fe82d417a938b672bfb5edc401b0f43
Add new options SEPARATE_BL2_NOLOAD_REGION to separate no-loadable
sections (.bss, stack, page tables) to a ram region specified
by BL2_NOLOAD_START and BL2_NOLOAD_LIMIT.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I844ee0fc405474af0aff978d292c826fbe0a82fd
SIMICS builds have different UART configurations compared
to hardware build. Hence, this patch defines a macro to
differentiate between both.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iadecd5445e06611486ac3c6a214a6d0dc8ccd27b
For some targets, Make recursively invokes itself in subdirectories.
When delegating the distclean target to tools/cert_create/Makefile,
the submake is called with the clean target instead of realclean.
Because of this, the submake never removes the cert_create executable.
A proper but more intrusive fix would
* avoid confusion about the semantics by following traditions or using
new names
https://www.gnu.org/prep/standards/standards.html#Standard-Targets
* avoid typing errors with the special $@ variable.
Something like:
In tools/cert_create/Makefile:
mostlyclean:
# Remove most objects but keep some results.
$(call SHELL_DELETE_ALL, src/build_msg.o ${OBJECTS})
clean: mostlyclean
# mostlyclean, then remove things built by Make.
$(call SHELL_DELETE,${BINARY})
distclean: clean
# clean, then remove things built by ./configure (none here).
realclean maintainer-clean: distclean
# distclean, then remove things built by autootols (none here).
In Makefile:
mostlyclean clean distclean realclean maintainer-clean:
$(MAKE) -C subdir1 $@
$(MAKE) -C subdir2 $@
Signed-off-by: Nicolas Boulenguez <nicolas@debian.org>
Change-Id: Iabfeca3da5724ab90a56ad6dcd6870d0a1d6b07f
During a transition to a higher EL some of the PSTATE bits are not set
by hardware, this means that their state may be leaked from lower ELs.
This patch sets those bits to a default value upon entry to EL3.
This patch was tested using a debugger to check the PSTATE values
are correctly set. As well as adding a test in the next patch to
ensure the PSTATE in lower ELs is still maintained after this change.
Change-Id: Ie546acbca7b9aa3c86bd68185edded91b2a64ae5
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Utilise LLVM binutils during compilation of TF-A instead of the default
utilities provided by the host. The Makefile looks in the path provided
for the current toolchain and only checks for them on the host if none
exist in this path. If the utilities don't exist in either place then
the build fails.
Change-Id: I6af2aa09ea3c8743cf3df6600d9760d909d76647
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Measured-Boot and Trusted-Boot are orthogonal to each other and hence
removed dependency of Trusted-Boot on Measured-Boot by making below
changes -
1. BL1 and BL2 main functions are used for initializing Crypto module
instead of the authentication module
2. Updated Crypto module registration macro for MEASURED_BOOT with only
necessary callbacks for calculating image hashes
3. The 'load_auth_image' function is now used for the image measurement
during Trusted or Non-Trusted Boot flow
Change-Id: I3570e80bae8ce8f5b58d84bd955aa43e925d9fff
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Introduced CRYPTO_SUPPORT an internal, non-user facing
build option and set it when the TRUSTED_BOARD_BOOT or
MEASURED_BOOT option is enabled.
Change-Id: Iae723d57a755a8b534b6ced650016365c62d4e05
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
With patch [1], ENABLE_SVE_FOR_NS is always enable.
Disable it for AARCH32 platforms, as the feature is not supported.
The warning message is replaced with an error, and the second override
is removed.
[1] dc78e62d80 ("feat(sme): enable SME functionality")
Change-Id: Ic9c5e2612c9e00bd0d37ca3b59537e39270c9799
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The HAFGRTR_EL2 register is UNDEFINED unless the CPU supports both
FEAT_FGT and FEAT_AMUv1. FEAT_FGT is mandatory for v8.6-A and upwards,
but FEAT_AMUv1 is optional (from v8.4-A upwards), and as such any
8.6-A cores today without support for FEAT_AMUv1 will trigger an
undefined instruction exception on accessing this register.
Currently ARM_ARCH_AT_LEAST macro has been used to associate with an
architecture extension allowing to access HAFGRTR_EL2 register. This
condition should be replaced with macros specific to individual
features. This patch adds a new set of macros "ENABLE_FEAT_FGT,
ENABLE_FEAT_AMUv1, ENABLE_FEAT_ECV" under build options to provide
controlled access to the HAFGRTR_EL2 register.
Further to ensure that the the build options passed comply
with the given hardware implementation, a feature detection mechanism,
checking whether build options match with the architecture is required
at bootime. This will be implemented and pushed later in a separate
patch.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: Ie390f4babe233b8b09455290277edbddecd33ead
fiptool links to libcrypto, so as with the other tools it should respect
OPENSSL_DIR for include/library paths.
Change-Id: Icd8c15fa5097db1da9a3a9222d9e267548c4c7e2
Signed-off-by: Ross Burton <ross.burton@arm.com>
For future reference, this changelog was generated with the following
command:
npm run release -- --skip.commit --skip.tag --release-as 2.6.0
Change-Id: Idf6be5c3be15ddfdb1d32fafb9e0e4b399b269f3
Signed-off-by: Chris Kay <chris.kay@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.
The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73
Add the --no-merges option when listing patches to check with rev-list
command, when running make checkpatch.
Change-Id: I47f3f5dfe358ed2b960a754f70aec0dc3c2b4536
Signed-off-by: Yann Gautier <yann.gautier@st.com>
MPMM - the Maximum Power Mitigation Mechanism - is an optional
microarchitectural feature present on some Armv9-A cores, introduced
with the Cortex-X2, Cortex-A710 and Cortex-A510 cores.
MPMM allows the SoC firmware to detect and limit high activity events
to assist in SoC processor power domain dynamic power budgeting and
limit the triggering of whole-rail (i.e. clock chopping) responses to
overcurrent conditions.
This feature is enabled via the `ENABLE_MPMM` build option.
Configuration can be done via FCONF by enabling `ENABLE_MPMM_FCONF`, or
by via the plaform-implemented `plat_mpmm_topology` function.
Change-Id: I77da82808ad4744ece8263f0bf215c5a091c3167
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change makes AMU auxiliary counters configurable on a per-core
basis, controlled by `ENABLE_AMU_AUXILIARY_COUNTERS`.
Auxiliary counters can be described via the `HW_CONFIG` device tree if
the `ENABLE_AMU_FCONF` build option is enabled, or the platform must
otherwise implement the `plat_amu_topology` function.
A new phandle property for `cpu` nodes (`amu`) has been introduced to
the `HW_CONFIG` specification to allow CPUs to describe the view of
their own AMU:
```
cpu0: cpu@0 {
...
amu = <&cpu0_amu>;
};
```
Multiple cores may share an `amu` handle if they implement the
same set of auxiliary counters.
AMU counters are described for one or more AMUs through the use of a new
`amus` node:
```
amus {
cpu0_amu: amu-0 {
#address-cells = <1>;
#size-cells = <0>;
counter@0 {
reg = <0>;
enable-at-el3;
};
counter@n {
reg = <n>;
...
};
};
};
```
This structure describes the **auxiliary** (group 1) AMU counters.
Architected counters have architecturally-defined behaviour, and as
such do not require DTB entries.
These `counter` nodes support two properties:
- The `reg` property represents the counter register index.
- The presence of the `enable-at-el3` property determines whether
the firmware should enable the counter prior to exiting EL3.
Change-Id: Ie43aee010518c5725a3b338a4899b0857caf4c28
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change reduces preprocessor dependencies on the
`AMU_GROUP1_NR_COUNTERS` and `AMU_GROUP1_COUNTERS_MASK` definitions, as
these values will eventually be discovered dynamically.
In their stead, we introduce the `ENABLE_AMU_AUXILIARY_COUNTERS` build
option, which will enable support for dynamically detecting and
enabling auxiliary AMU counters.
This substantially reduces the amount of memory used by platforms that
know ahead of time that they do not have any auxiliary AMU counters.
Change-Id: I3d998aff44ed5489af4857e337e97634d06e3ea1
Signed-off-by: Chris Kay <chris.kay@arm.com>
