* changes:
feat(stm32mp2): use early traces
feat(st-bsec): use early traces
refactor(st): replace STM32MP_EARLY_CONSOLE with EARLY_CONSOLE
feat(console): introduce EARLY_CONSOLE
feat(bl32): create an sp_min_setup function
Now that EARLY_CONSOLE is generic, use it instead of the ST flag.
Remove stm32mp_setup_early_console() calls as it is done in common TF-A
code.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Icac29b62a6267303cb5c679d15847c013ead1d23
When generating fiptool for STM32MP2, a new parameter is added to
put DDR firmware inside the FIP.
To avoid duplicating fiptool platform files, move
tools/fiptool/plat_fiptool/st/stm32mp1 files in their parent directory
and move plat_def_fip_uuid.h in in plat/st/common/include.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I1dd796847869e2bfb6ee8c2bcef25c595fa5197a
Deprecation notice was sent to the community and no objection was
raised, so removing mbedtls 2.x support.
Change-Id: Id3eb98b55692df98aabe6a7c5a5ec910222c8abd
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Add an API stm32_clear_fwu_trial_boot_cnt() function to clear the
trial state counter. This is called in the corner case scenario when
the active index is in an Invalid state, thus needing a reset of the
trial state counter.
Change-Id: I2980135da88d0d947c222655c7958b51eb572d69
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
As these definitions will be the same for STM32MP1 and STM32MP2, move
PLATFORM_MTD_MAX_PAGE_SIZE and DWL_BUFFER_SIZE macro definition to the
file: plat/st/common/include/stm32mp_common.h
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I480669d009d15fec753298f47b136e34fa240132
The function stm32mp_is_closed_device() is replaced with
stm32mp_check_closed_device(), which return an uint32_t, either
STM32MP_CHIP_SEC_OPEN or STM32MP_CHIP_SEC_CLOSED.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ie0790cdc36c4b6522083bc1f0e7c38e8061e6adf
Move to size_t to ensure a generic algorithm whatever the platform
architecture.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I7879367849ed86750dcff2b6a15f4b998bf6da18
Signed-off-by: Sebastien PASDELOUP <sebastien.pasdeloup-ext@st.com>
Those storage macros are common to all STM32MPU chips, move them to
plat/st/common/include/stm32mp_io_storage.h
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id20ec00ba65edf9ec7a3a89adfda307c954c3cb6
The files stm32mp_mbedtls_config-{2,3}.h are moved to
plat/st/common/include directory as they could be shared with other ST
platforms. Their prefixes are changed from stm32mp1 to stm32mp.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I86e39481b6c8d2689c59eb9a351b77b3d6233b08
Create a function stm32_display_board_info() that will display ST
board information, from a parameter taken from OTP fuse. The code
is just moved from STM32MP1 part to common directory.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I9e12fe98b5aabc7791cf2c9d48a38fbf2b219f9e
The GIC v2 initialization code could be shared to other ST platforms.
The stm32mp1_gic.c file is then moved to common directory, and renamed
stm32mp_gic.c.
The functions are also prefixed with stm32mp_gic.
Change-Id: I60820823b470217d3a95cc569f941c2cb923dfa9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This backup register used to pass boot information to BL33, has the
same mapping for ST platforms. Its management can then be moved to
common directory.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ic873f099c1f87c6ba2825b4946365ae6a9687798
This corrects MISRA c2012-7.2 violation:
A "u" or "U" suffix shall be applied to all integer constants that are
represented in an unsigned type.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I92b394572528e7179a314bbad4a032fd65053861
The code managing legacy boot (without FIP) that was under
STM32MP_USE_STM32IMAGE flag is remove.
Change-Id: I04452453ed84567b0de39e900594a81526562259
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the decryption support for STM32MP1 binaries.
Decryption is limited to the BL32 loaded images.
Limitation: STM32MP15 doesn't support the feature.
Change-Id: I96800bac7b22109f8471eb2953fc0dc269fc4fd1
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Remove deprecated authentication mode to use the FIP authentication
based on TBBR requirements. It will use the new crypto library.
Change-Id: I95c7baa64ba42c370ae136f59781f2a7a4c7f507
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Introduce a functionality for saving/restoring boot auth status
and partition used for booting (FSBL partition on which the boot
was successful).
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Change-Id: I4d7f153b70dfc49dad8c1c3fa71111a350caf1ee
If we reboot 3 times in trial mode, BL2 will select previous boot image.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Change-Id: I82b423cc84f0471fdb6fa7c393fc5fe411d25c06
Add an early UART console to ease debug before UART is fully configured.
This is done under flag STM32MP_EARLY_CONSOLE in the first STM32MP1
platform function called (bl2_el3_early_platform_setup()). It uses the
parameters defined for crash console: STM32MP_DEBUG_USART* macros.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Id6be62368723a0499e97bbf56fb52c166fcbdfad
STM32MP15xA and STM32MP15xD chip part numbers don't
support the secure boot.
All functions linked to secure boot must not be used
and signed binaries are not allowed on such chip.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I5b85f322f5eb3b64415e1819bd00fb2c99f20695
Use dt_find_otp_name() to retrieve platform OTP information
from device tree, directly or through stm32_get_otp_index() and
stm32_get_otp_value() platform services.
String definitions replace hard-coded values, they are used to call
this new function.
Change-Id: I81213e4a9ad08fddadc2c97b064ae057a4c79561
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Remove stm32mp_incr_shrefcnt(), stm32mp_decr_shrefcnt(),
stm32mp_incr_refcnt() and stm32mp_decr_refcnt() that are unused.
The file is then just removed.
Change-Id: I09ee23c02317df5d8f71cbc355d3ed4a67ce2749
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
With the FWU Multi Bank update feature, the platform can boot from one
of multiple banks(partitions). Pass the value of bank from which the
platform has booted as boot index to the Update Agent. The Update
Agent will match this boot index value against the active_index field
in the metadata, and update the metadata if there is a mismatch.
Fow now, the mechanism to pass the boot index is platform specific. On
the STM32MP1 platform, the boot index value is passed through a
memorey mapped TAMP register on the SoC.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I0aa665ff9c1db95be8ae19ed8de6d866587d6850
Add GUID's for identifying the firmware image type. With the FWU
multi bank boot feature enabled, these GUID values are used to
identify the firmware image to be booted. This is done by matching
GUID values of images in the io policy table with the Image GUID value
that is read from the FWU metadata structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Id9751f02f95fc48ef68e4e3f9f0ddbf6d6319d3c
With the FWU multi bank feature enabled, the identification of
firmware image type is done using the image type GUID instead of
binary_type field.
Add GUID values for the FIP image which can be updated through
the FWU firmware update feature. The GUID values are used in
identifying the firmware images.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: If7d9356aa8d2bb3fbcbc87100e6972f1a1862921
Use regulator framework to get CPU and VDD power supplies.
Change-Id: Ice745fb21ff10e71ef811e747165499c2e19253e
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Protect the UART instance used for serial boot
with UART used for console.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b34e7baa81594c3fbf0513191737027bf
To ease console configuration, a dedicated function is created:
stm32mp_uart_console_setup(). The code will also be common for the
different BLs.
Change-Id: Idf3cad756f125ca2313cf30b1311637a9df8f27f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add function stm32_get_boot_interface to get the current boot interface
from information saved in the TAMP register.
Change-Id: I23af43c68eeaebe4c45920a57d739117aea3fbb1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The function stm32_save_boot_interface()is moved to stm32mp1_private.c
file. The files stm32mp1_context.{c,h} are removed.
As return is always 0, change the function to return void.
Call it earlier, to be able to use it when configuring console.
Change-Id: I8986e1257dc8e8708eab044a51ea1f2426b16597
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_secure_at_reset().
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b73c3636859f97fcc57f81cf68b42efc727922e
Handle boot from UART with STM32CubeProgammer based on mmap io
for STM32MP15.
Depends-On: Iba84e8dfd67b9f30416efb0f6778e48ba1f75dad
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ibd719dd46a11da78633728675ef6639635b6cf67
Add a file to support the STMicroelectronics tool STM32CubeProgrammer
over UART in BL2 for STM32MP15x platform.
This tools is based on protocol defined in AN5275,
"USB DFU/USART protocols used in STM32MP1 Series bootloaders"
based on STM32 MCU protocols (AN3155, "USART protocol used
in the STM32 bootloader").
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I956c95d8de0a94d1eb8e61f043651dae7b838170
Add a file to support over USB the STMicroelectronics tool
STM32CubeProgrammer in BL2 for STM32MP15x platform.
This tools is based on DFU stack.
Change-Id: I48a8f772cb0e9b8be24c06847f724f0470c0f917
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add a stack to support the Universal Serial Bus Device Class
Specification for Device Firmware Upgrade (USB DFU v1.1).
This stack is based on the USB device stack (USBD).
Change-Id: I8a56411d184882b6a9e3617c6dfb859086b8f353
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
dt_match_instance_by_compatible() gives the DT node offset in DT
that matches both compatible and the peripheral instance address.
Change-Id: Ia85f4f4aa8fe8efd4df310d765e7586e67aa34c2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
BL2 still uses the STM32 header binary format to be loaded from ROM code.
BL32 and BL33 and their respective device tree files are now put together
in a FIP file.
One DTB is created for each BL. To reduce their sizes, 2 new dtsi file are
in charge of removing useless nodes for a given BL. This is done because
BL2 and BL32 share the same device tree files base.
The previous way of booting is still available, the compilation flag
STM32MP_USE_STM32IMAGE has to be set to 1 in the make command. Some files
are duplicated and their names modified with _stm32_ to avoid too much
switches in the code.
Change-Id: I1ffada0af58486d4cf6044511b51e56b52269817
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Some parameters from BootROM boot context can be required after boot.
To save space in SYSRAM, this context can be overwritten during images
load sequence. The needed information (here the boot interface) is
then saved in a local variable.
Change-Id: I5e1ad4630ccf78480f415a0a83939005ae67729e
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Device Tree address is now a parameter for dt_open_and_check() function.
This will allow better flexibility when introducing PIE and FIP.
The fdt pointer is now only assigned if the given address holds
a valid device tree file. This allows removing the fdt_checked variable,
as we now check fdt is not null.
Change-Id: I04cbb2fc05c9c711ae1c77d56368dbeb6dd4b01a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The JEDEC information for STMicroelectronics is:
JEDEC_ST_MFID U(0x20)
JEDEC_ST_BKID U(0x0)
And rely on platform functions to get chip IP and revision.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4fa4ac8bb5583b1871b768decc9fe08e8966ff54
Three functions are exported to get SoC version, SoC device ID, and SoC
name. Those functions are based on reworked existing static functions.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I1f3949062bb488286a9e7a38ffcd1457953dac56
Retrieve peripheral base address from a define instead of
parsing the device tree. The goal is to improve execution time.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2588c53ad3d4abcc3d7fe156458434a7940dd72b
Introduce helper functions stm32mp_register_secure_gpio() and
stm32mp_register_non_secure_gpio() for drivers to register a
GPIO pin as secure or non-secure.
These functions are stubbed when shared resource driver is not
embedded in the BL image so that drivers do not bother whether they
shall register or not their resources.
Change-Id: I1fe98576c072ae31f75427c9ac5c9f6c4f1b6ed1
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Introduce helper functions stm32mp_register_secure_periph_iomem()
and stm32mp_register_non_secure_periph_iomem() for drivers to
register a resource as secure or non-secure based on its SoC
interface registers base address.
These functions are stubbed when shared resources driver is not
embedded (!STM32MP_SHARED_RESOURCES) so that drivers embedded
in other BL stages do not bother whether they shall register or
not their resources.
Change-Id: Icebd05a930afc5964bc4677357da5d1b23666066
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Define helper functions stm32mp_register_secure_periph() and
stm32mp_register_non_secure_periph() for platform drivers to
register a shared resource assigned to respectively secure
or non-secure world.
Some resources are related to clock resources. When a resource is
registered as secure, ensure its clock dependencies are also
registered as secure. Registering a non-secure resource does not
mandate its clock dependencies are also registered as non-secure.
Change-Id: I74975be8976b8d3bf18dcc807541a072803af6e3
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
