Enable switch between DDRC Auto low power and software/hardware
control modes DDRC Auto low-power mode is used when system is
active, software/hardware control mode is used when going into
suspend. Enable switching between Auto mode and SW/HW mode in
enter/exit retention routines.
Set LPI_SRPD_LONG_MCCLK_GATE_WAKEUP_F2 Max setting to allow
LPDDR_EN_CLKGATE reload LPI_SRPD_LONG_MCCLK_GATE_WAKEUP_F2 to
exit retention mode
Signed-off-by: Pascal Mareau <pascal.mareau@nxp.com>
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
Signed-off-by: Hongting Ting <hongting.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I3c4b6f7bc6ca02649ff27cd3d9a0c50dab3a3ad0
Enable the DDR frequency scaling support on i.MX8ULP.
Normally, the freq_index define is as below:
0: boot frequency;
1: low frequency(PLL bypassed);
2. high frequency(PLL ON).
Currently, DDR DFS only do frequency switching between
Low freq and high freq.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Change-Id: I3acd8bdf75e2dd6dff645b9f597dcfc0a756c428
Support trusty on imx8ulp.
Signed-off-by: Ji Luo <ji.luo@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I7ada2557023e271a721d50bfe7fd20b5f01cb128
Add opteed support for imx8ulp.
Signed-off-by: Clement Faure <clement.faure@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Iddf6f164b7146332e99de42fcbbf9c892eb1d994
Clear HRM bit in MU0_B CCR0 register to allow RTD to reset APD.
The action needs at both ATF init and APD resume.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I2475e34b13f57818580a478ab567bfb9fc6cf174
Add basic support for the cpuidle(cluster retention) and system
suspend support using the HW sleep mode.
When system enter low power mode after doing reboot twice, APD
will be failed to exit from low power mode successfully. it is
because that after secondary reboot, upower will modify the default
power switch config, then DDR will be off wrongly. So config the
low power mode info explicitly before APD entering any low power
mode.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ib68bfdfd4b925541e343aef4a5296a542451f86b
Add the initial xRDC support on i.MX8ULP.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I93ea8e2cebb049e6f20e71cfe50c7583a3228f38
JR1, JR2 and JR3 are available for use by the non secure
world. Setup the A35 core DID for these job rings.
Signed-off-by: Varun Sethi <v.sethi@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: If64d4ce11ebff49a2405d8b561b344fcd7b2614f
Add the basic support for i.MX8ULP.
The i.MX 8ULP family of processors features NXP’s advanced
implementation of the dual Arm Cortex-A35 cores alongside
an Arm Cortex-M33. This combined architecture enables the
device to run a rich operating system (such as Linux) on
the Cortex-A35 core and an RTOS (such as FreeRTOS) on the
Cortex-M33 core. It also includes a Cadence Tensilica Fusion
DSP for low-power audio and a HiFi4 DSP for advanced audio
and machine learning applications.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I12df622b95960bcdf7da52e4c66470a700690e36
