kde-l10n/sv/messages/applications/partitionmanager.po

# translation of partitionmanager.po to Swedish
# Copyright (C) YEAR This_file_is_part_of_KDE
# This file is distributed under the same license as the PACKAGE package.
#
# Stefan Asserhäll <stefan.asserhall@bredband.net>, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
msgid ""
msgstr ""
"Project-Id-Version: partitionmanager\n"
"Report-Msgid-Bugs-To: xakepa10@gmail.com\n"
"POT-Creation-Date: 2014-12-09 18:22+0000\n"
"PO-Revision-Date: 2014-07-03 16:24+0200\n"
"Last-Translator: Stefan Asserhäll <stefan.asserhall@bredband.net>\n"
"Language-Team: Swedish <kde-i18n-doc@kde.org>\n"
"Language: sv\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Lokalize 1.4\n"

#: jobs/restorefilesystemjob.cpp:75
msgctxt "@info/plain"
msgid "Could not open backup file <filename>%1</filename> to restore from."
msgstr ""
"Kunde inte öppna säkerhetskopieringsfil <filename>%1</filename> att "
"återställa från."

#: jobs/restorefilesystemjob.cpp:77 jobs/shredfilesystemjob.cpp:73
msgctxt "@info/plain"
msgid "Could not open target partition <filename>%1</filename> to restore to."
msgstr ""
"Kunde inte öppna målpartitionen <filename>%1</filename> att återställa till."

#: jobs/restorefilesystemjob.cpp:105 jobs/shredfilesystemjob.cpp:77
#: jobs/movefilesystemjob.cpp:80
msgctxt "@info/plain"
msgid "Closing device. This may take a few seconds."
msgstr "Stänger enhet. Det kan ta några sekunder."

#: jobs/restorefilesystemjob.cpp:116
msgctxt "@info/plain"
msgid ""
"Restore the file system from file <filename>%1</filename> to partition "
"<filename>%2</filename>"
msgstr ""
"Återställ filsystemet från filen <filename>%1</filename> till partitionen "
"<filename>%2</filename>"

#: jobs/backupfilesystemjob.cpp:65
msgctxt "@info/plain"
msgid ""
"Could not open file system on source partition <filename>%1</filename> for "
"backup."
msgstr ""
"Kunde inte öppna filsystemet på källpartitionen <filename>%1</filename> för "
"säkerhetskopiering."

#: jobs/backupfilesystemjob.cpp:67
msgctxt "@info/plain"
msgid "Could not create backup file <filename>%1</filename>."
msgstr "Kunde inte skapa säkerhetskopieringsfil <filename>%1</filename>."

#: jobs/backupfilesystemjob.cpp:79
msgctxt "@info/plain"
msgid ""
"Back up file system on partition <filename>%1</filename> to <filename>%2</"
"filename>"
msgstr ""
"Säkerhetskopiera filsystemet på partitionen <filename>%1</filename> till "
"<filename>%2</filename>"

#: jobs/createpartitiontablejob.cpp:59
msgctxt "@info/plain"
msgid ""
"Creating partition table failed: Could not open device <filename>%1</"
"filename>."
msgstr ""
"Misslyckades skapa partitionstabell: Kunde inte öppna enhet <filename>%1</"
"filename>."

#: jobs/createpartitiontablejob.cpp:68
msgctxt "@info/plain"
msgid "Create new partition table on device <filename>%1</filename>"
msgstr "Skapa ny partitionstabell på enheten <filename>%1</filename>"

#: jobs/setpartgeometryjob.cpp:82
msgctxt "@info/plain"
msgid ""
"Could not open device <filename>%1</filename> while trying to resize/move "
"partition <filename>%2</filename>."
msgstr ""
"Kunde inte öppna enheten <filename>%1</filename> vid försök att ändra "
"storlek eller flytta partitionen <filename>%2</filename>."

#: jobs/setpartgeometryjob.cpp:91
msgctxt "@info/plain"
msgid ""
"Set geometry of partition <filename>%1</filename>: Start sector: %2, length: "
"%3"
msgstr ""
"Ställ in geometri för partitionen <filename>%1</filename>: Startsektor %2, "
"längd %3"

#: jobs/shredfilesystemjob.cpp:71
msgctxt "@info/plain"
msgid "Could not open random data source to overwrite file system."
msgstr "Kunde inte öppna slumpmässig datakälla för att skriva över filsystem."

#: jobs/shredfilesystemjob.cpp:88
msgctxt "@info/plain"
msgid "Shred the file system on <filename>%1</filename>"
msgstr "Förstör filsystem på <filename>%1</filename>"

#: jobs/setpartflagsjob.cpp:85
msgctxt "@info/plain flag turned on, active"
msgid "on"
msgstr "på"

#: jobs/setpartflagsjob.cpp:85
msgctxt "@info/plain flag turned off, inactive"
msgid "off"
msgstr "av"

#: jobs/setpartflagsjob.cpp:85
msgctxt "@info/plain"
msgid ""
"There was an error setting flag %1 for partition <filename>%2</filename> to "
"state %3."
msgstr ""
"Ett fel uppstod vid försök att sätta flaggan %1 för partitionen <filename>"
"%2</filename> till tillståndet %3."

#: jobs/setpartflagsjob.cpp:94
msgctxt "@info/plain"
msgid ""
"Could not find partition <filename>%1</filename> on device <filename>%2</"
"filename> to set partition flags."
msgstr ""
"Kunde inte hitta partitionen <filename>%1</filename> på enheten <filename>"
"%2</filename> för att sätta partitionens flaggor."

#: jobs/setpartflagsjob.cpp:102
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to set "
"partition flags for partition <filename>%2</filename>."
msgstr ""
"Kunde inte öppna partitionstabellen på enheten <filename>%1</filename> för "
"att sätta partitionens flaggor för partitionen <filename>%2</filename>."

#: jobs/setpartflagsjob.cpp:107
msgctxt "@info/plain"
msgid ""
"Could not open device <filename>%1</filename> to set partition flags for "
"partition <filename>%2</filename>."
msgstr ""
"Kunde inte öppna enheten <filename>%1</filename> för att sätta partitionens "
"flaggor för partitionen <filename>%2</filename>."

#: jobs/setpartflagsjob.cpp:120 ops/setpartflagsoperation.cpp:75
msgctxt "@info/plain"
msgid "Clear flags for partition <filename>%1</filename>"
msgstr "Nollställ flaggor för partitionen <filename>%1</filename>"

#: jobs/setpartflagsjob.cpp:122
msgctxt "@info/plain"
msgid "Set the flags for partition <filename>%1</filename> to \"%2\""
msgstr "Ställ in flaggorna för partitionen <filename>%1</filename> till \"%2\""

#: jobs/createpartitionjob.cpp:71
#: plugins/libparted/libpartedpartitiontable.cpp:196
msgctxt "@info/plain"
msgid ""
"Failed to add partition <filename>%1</filename> to device <filename>%2</"
"filename>."
msgstr ""
"Misslyckades lägga till partition <filename>%1</filename> på enheten "
"<filename>%2</filename>."

#: jobs/createpartitionjob.cpp:76
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to create "
"new partition <filename>%2</filename>."
msgstr ""
"Kunde inte öppna partitionstabellen på enheten <filename>%1</filename> för "
"att skapa ny partition <filename>%2</filename>."

#: jobs/createpartitionjob.cpp:81
msgctxt "@info/plain"
msgid ""
"Could not open device <filename>%1</filename> to create new partition "
"<filename>%2</filename>."
msgstr ""
"Kunde inte öppna enheten <filename>%1</filename> för att skapa ny partition "
"<filename>%2</filename>."

#: jobs/createpartitionjob.cpp:91
msgctxt "@info/plain"
msgid "Create new partition <filename>%1</filename>"
msgstr "Skapa ny partition <filename>%1</filename>"

#: jobs/createpartitionjob.cpp:93
msgctxt "@info/plain"
msgid "Create new partition on device <filename>%1</filename>"
msgstr "Skapa ny partition på enheten <filename>%1</filename>"

#: jobs/checkfilesystemjob.cpp:56
msgctxt "@info/plain"
msgid "Check file system on partition <filename>%1</filename>"
msgstr "Kontrollera filsystem på partitionen <filename>%1</filename>"

#: jobs/setfilesystemlabeljob.cpp:51
msgctxt "@info/plain"
msgid ""
"File system on partition <filename>%1</filename> does not support setting "
"labels. Job ignored."
msgstr ""
"Filsystemet på partitionen <filename>%1</filename> stöder inte inställning "
"av etiketter. Jobbet ignorerat."

#: jobs/setfilesystemlabeljob.cpp:67
msgctxt "@info/plain"
msgid ""
"Set the file system label on partition <filename>%1</filename> to \"%2\""
msgstr ""
"Ställ in filsystemetiketten på partitionen <filename>%1</filename> till "
"\"%2\""

#: jobs/movefilesystemjob.cpp:64
msgctxt "@info/plain"
msgid ""
"Could not open file system on partition <filename>%1</filename> for moving."
msgstr ""
"Kunde inte öppna filsystemet på partition <filename>%1</filename> för "
"förflyttning."

#: jobs/movefilesystemjob.cpp:66
msgctxt "@info/plain"
msgid ""
"Could not create target for moving file system on partition <filename>%1</"
"filename>."
msgstr ""
"Kunde inte skapa mål för att flytta filsystem på partition <filename>%1</"
"filename>."

#: jobs/movefilesystemjob.cpp:78
msgctxt "@info/plain"
msgid "Rollback for file system on partition <filename>%1</filename> failed."
msgstr ""
"Återgång för filsystem på partitionen <filename>%1</filename> misslyckades."

#: jobs/movefilesystemjob.cpp:94
msgctxt "@info/plain"
msgid "Move the file system on partition <filename>%1</filename> to sector %2"
msgstr "Flytta filsystemet på partition <filename>%1</filename> till sektor %2"

#: jobs/deletepartitionjob.cpp:71
#: plugins/libparted/libpartedpartitiontable.cpp:218
msgctxt "@info/plain"
msgid "Could not delete partition <filename>%1</filename>."
msgstr "Kunde inte ta bort partition <filename>%1</filename>."

#: jobs/deletepartitionjob.cpp:79
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to delete "
"partition <filename>%2</filename>."
msgstr ""
"Kunde inte öppna partitionstabellen på enheten <filename>%1</filename> för "
"att ta bort partitionen <filename>%2</filename>."

#: jobs/deletepartitionjob.cpp:84
msgctxt "@info/plain"
msgid ""
"Deleting partition failed: Could not open device <filename>%1</filename>."
msgstr ""
"Misslyckades ta bort partition: Kunde inte öppna enheten <filename>%1</"
"filename>."

#: jobs/deletepartitionjob.cpp:93
msgctxt "@info/plain"
msgid "Delete the partition <filename>%1</filename>"
msgstr "Ta bort partitionen <filename>%1</filename>"

#: jobs/createfilesystemjob.cpp:70
msgctxt "@info/plain"
msgid ""
"Failed to set the system type for the file system on partition <filename>%1</"
"filename>."
msgstr ""
"Misslyckades ställa in systemtyp för filsystemet på partitionen <filename>"
"%1</filename>."

#: jobs/createfilesystemjob.cpp:75
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to set the "
"system type for partition <filename>%2</filename>."
msgstr ""
"Kunde inte öppna partitionstabellen på enheten <filename>%1</filename> för "
"att ställa in systemtyp för partitionen <filename>%2</filename>."

#: jobs/createfilesystemjob.cpp:80
msgctxt "@info/plain"
msgid ""
"Could not open device <filename>%1</filename> to set the system type for "
"partition <filename>%2</filename>."
msgstr ""
"Kunde inte öppna enheten <filename>%1</filename> för att ställa in systemtyp "
"för partitionen <filename>%2</filename>."

#: jobs/createfilesystemjob.cpp:91
msgctxt "@info/plain"
msgid "Create file system %1 on partition <filename>%2</filename>"
msgstr "Skapa filsystem %1 på partitionen <filename>%2</filename>"

#: jobs/resizefilesystemjob.cpp:75
msgctxt "@info/plain"
msgid ""
"The file system on partition <filename>%2</filename> already has the "
"requested length of 1 sector."
msgid_plural ""
"The file system on partition <filename>%2</filename> already has the "
"requested length of %1 sectors."
msgstr[0] ""
"Filsystemet på partitionen <filename>%2</filename> har redan den begärda "
"längden 1 sektor."
msgstr[1] ""
"Filsystemet på partitionen <filename>%2</filename> har redan den begärda "
"längden %1 sektorer."

#: jobs/resizefilesystemjob.cpp:80
msgctxt "@info/plain"
msgid "Resizing file system from %1 to %2 sectors."
msgstr "Ändrar filsystemets storlek från %1 till %2 sektorer."

#: jobs/resizefilesystemjob.cpp:89
msgctxt "@info/plain"
msgid "Resizing a %1 file system using internal backend functions."
msgstr ""
"Ändrar storlek på ett %1 filsystem genom att använda interna funktioner i "
"bakgrundsprogrammet."

#: jobs/resizefilesystemjob.cpp:102
msgctxt "@info/plain"
msgid ""
"The file system on partition <filename>%1</filename> cannot be resized "
"because there is no support for it."
msgstr ""
"Storleken på filsystemet på partitionen <filename>%1</filename> kan inte "
"ändras eftersom det inte finns något stöd för det."

#: jobs/resizefilesystemjob.cpp:133
msgctxt "@info/plain"
msgid "Successfully resized file system using internal backend functions."
msgstr ""
"Ändrade storlek på filsystem med lyckat resultat genom att använda "
"funktioner i bakgrundsprogrammet."

#: jobs/resizefilesystemjob.cpp:140
#: plugins/libparted/libpartedpartitiontable.cpp:318
msgctxt "@info/plain"
msgid ""
"Could not open partition <filename>%1</filename> while trying to resize the "
"file system."
msgstr ""
"Kunde inte öppna partitionen <filename>%1</filename> vid försök att ändra "
"storlek på filsystemet."

#: jobs/resizefilesystemjob.cpp:145
#: plugins/libparted/libpartedpartitiontable.cpp:321
msgctxt "@info/plain"
msgid ""
"Could not read geometry for partition <filename>%1</filename> while trying "
"to resize the file system."
msgstr ""
"Kunde inte läsa geometrin för partitionen <filename>%1</filename> vid försök "
"att ändra storlek på filsystemet."

#: jobs/resizefilesystemjob.cpp:153
msgctxt "@info/plain"
msgid "Maximize file system on <filename>%1</filename> to fill the partition"
msgstr ""
"Maximera filsystem på <filename>%1</filename> för att fylla partitionen"

#: jobs/resizefilesystemjob.cpp:155
msgctxt "@info/plain"
msgid "Resize file system on partition <filename>%2</filename> to 1 sector"
msgid_plural ""
"Resize file system on partition <filename>%2</filename> to %1 sectors"
msgstr[0] ""
"Ändra storlek för filsystem på partitionen <filename>%2</filename> till 1 "
"sektor"
msgstr[1] ""
"Ändra storlek för filsystem på partitionen <filename>%2</filename> till %1 "
"sektorer"

#: jobs/copyfilesystemjob.cpp:61
msgctxt "@info/plain"
msgid ""
"Cannot copy file system: File system on target partition <filename>%1</"
"filename> is smaller than the file system on source partition <filename>%2</"
"filename>."
msgstr ""
"Kan inte kopiera filsystem: Filsystemet på målpartitionen <filename>%1</"
"filename> är mindre än filsystemet på källpartitionen <filename>%2</"
"filename>."

#: jobs/copyfilesystemjob.cpp:70
msgctxt "@info/plain"
msgid ""
"Could not open file system on source partition <filename>%1</filename> for "
"copying."
msgstr ""
"Kunde inte öppna filsystem på källpartitionen <filename>%1</filename> för "
"kopiering."

#: jobs/copyfilesystemjob.cpp:72
msgctxt "@info/plain"
msgid ""
"Could not open file system on target partition <filename>%1</filename> for "
"copying."
msgstr ""
"Kunde inte öppna filsystem på målpartitionen <filename>%1</filename> för "
"kopiering."

#: jobs/copyfilesystemjob.cpp:76
msgctxt "@info/plain"
msgid ""
"Closing device. This may take a while, especially on slow devices like "
"Memory Sticks."
msgstr ""
"Stänger enhet. Det kan ta en stund, särskilt på långsamma enheter som "
"minnesstickor."

#: jobs/copyfilesystemjob.cpp:105
msgctxt "@info/plain"
msgid ""
"Copy file system on partition <filename>%1</filename> to partition <filename>"
"%2</filename>"
msgstr ""
"Kopiera filsystem på partition <filename>%1</filename> till partition "
"<filename>%2</filename>"

#: jobs/deletefilesystemjob.cpp:81
msgctxt "@info/plain"
msgid "Could not delete file system on <filename>%1</filename>."
msgstr "Kunde inte ta bort filsystemet på <filename>%1</filename>."

#: jobs/deletefilesystemjob.cpp:89
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to delete "
"file system on <filename>%2</filename>."
msgstr ""
"Kunde inte öppna partitionstabellen på enheten <filename>%1</filename> för "
"att ta bort filsystemet på <filename>%2</filename>."

#: jobs/deletefilesystemjob.cpp:94
msgctxt "@info/plain"
msgid ""
"Could not delete file system signature for partition <filename>%1</"
"filename>: Failed to open device <filename>%2</filename>."
msgstr ""
"Kunde inte ta bort filsystemsignaturen för partitionen <filename>%1</"
"filename>: Misslyckades öppna enheten <filename>%2</filename>."

#: jobs/deletefilesystemjob.cpp:104
msgctxt "@info/plain"
msgid "Delete file system on <filename>%1</filename>"
msgstr "Ta bort filsystem på <filename>%1</filename>"

#: jobs/job.cpp:48
msgctxt "@info/plain"
msgid ""
"The logical sector sizes in the source and target for copying are not the "
"same. This is currently unsupported."
msgstr ""
"Den logiska sektorstorleken på källan och målet för kopiering är inte samma. "
"Det stöds för närvarande inte."

#: jobs/job.cpp:67
msgctxt "@info/plain"
msgid "Copying %1 blocks (%2 sectors) from %3 to %4, direction: %5."
msgstr "Kopierar %1 block (%2 sektorer) från %3 till %4, riktning: %5."

#: jobs/job.cpp:92
msgctxt "@info/plain"
msgid "Copying %1 MiB/second, estimated time left: %2"
msgstr "Kopierar %1 Mibyte/sekund, uppskattad återstående tid: %2"

#: jobs/job.cpp:111
msgctxt "@info/plain"
msgid "Copying remainder of block size %1 from  %2 to %3."
msgstr "Kopierar återstoden av block med storlek %1 från  %2 till %3."

#: jobs/job.cpp:124
msgid "1 sector"
msgid_plural "%1 sectors"
msgstr[0] "1 sektor"
msgstr[1] "%1 sektorer"

#: jobs/job.cpp:124
msgctxt ""
"@info/plain argument 2 is a string such as 7 sectors (localized accordingly)"
msgid "Copying 1 block (%2) finished."
msgid_plural "Copying %1 blocks (%2) finished."
msgstr[0] "\tKopiering av 1 block (%2) klar."
msgstr[1] "Kopiering av %1 block (%2) klar."

#: jobs/job.cpp:133
msgctxt "@info/plain"
msgid "Source and target for copying do not overlap: Rollback is not required."
msgstr "Källa och mål för kopiering överlappar inte: Återgång behövs inte."

#: jobs/job.cpp:159
msgctxt "@info/plain"
msgid "Rollback from: First sector: %1, last sector: %2."
msgstr "Återgång från: första sektor: %1, sista sektor: %2."

#: jobs/job.cpp:160
msgctxt "@info/plain"
msgid "Rollback to: First sector: %1, last sector: %2."
msgstr "Återgång till: första sektor: %1, sista sektor: %2."

#: jobs/job.cpp:165 jobs/job.cpp:172
msgctxt "@info/plain"
msgid "Could not open device <filename>%1</filename> to rollback copying."
msgstr ""
"Kunde inte öppna enheten <filename>%1</filename> för att utföra "
"återgångskopiering."

#: jobs/job.cpp:180
msgctxt "@info/plain"
msgid "Rollback failed: Source or target are not devices."
msgstr "Återgång misslyckades: Källan eller målet är inte enheter."

#: jobs/job.cpp:195
msgctxt "@info/plain"
msgid "Job: %1"
msgstr "Jobb: %1"

#: jobs/job.cpp:204
msgctxt "@info/plain job status (error, warning, ...)"
msgid "%1: %2"
msgstr "%1: %2"

#: jobs/job.cpp:230
msgctxt "@info:progress job"
msgid "Pending"
msgstr "Väntande"

#: jobs/job.cpp:231
msgctxt "@info:progress job"
msgid "Success"
msgstr "Lyckades"

#: jobs/job.cpp:232
msgctxt "@info:progress job"
msgid "Error"
msgstr "Fel"

#: fs/fat16.cpp:137
msgctxt "@info/plain"
msgid "Setting label for partition <filename>%1</filename> to %2"
msgstr "Ställ in etikett för partitionen <filename>%1</filename> till %2"

#: fs/ntfs.cpp:198
msgctxt "@info/plain"
msgid ""
"Updating boot sector for NTFS file system on partition <filename>%1</"
"filename>."
msgstr ""
"Uppdaterar startsektor för NTFS filsystemet på partitionen <filename>%1</"
"filename>."

#: fs/ntfs.cpp:211
msgctxt "@info/plain"
msgid ""
"Could not open partition <filename>%1</filename> for writing when trying to "
"update the NTFS boot sector."
msgstr ""
"Kunde inte öppna partitionen <filename>%1</filename> för skrivning vid "
"försök att uppdatera NTFS startsektor."

#: fs/ntfs.cpp:217
msgctxt "@info/plain"
msgid ""
"Could not seek to position 0x1c on partition <filename>%1</filename> when "
"trying to update the NTFS boot sector."
msgstr ""
"Kunde inte söka till position 0x1c på partitionen <filename>%1</filename> "
"vid försök att uppdatera NTFS startsektor."

#: fs/ntfs.cpp:223
msgctxt "@info/plain"
msgid ""
"Could not write new start sector to partition <filename>%1</filename> when "
"trying to update the NTFS boot sector."
msgstr ""
"Kunde inte skriva ny startsektor till partitionen <filename>%1</filename> "
"vid försök att uppdatera NTFS startsektor."

#: fs/ntfs.cpp:227
msgctxt "@info/plain"
msgid ""
"Updated NTFS boot sector for partition <filename>%1</filename> successfully."
msgstr ""
"Uppdaterade NTFS startsektor för partition <filename>%1</filename> med "
"lyckat resultat."

#: fs/nilfs2.cpp:144
msgctxt "@info/plain"
msgid ""
"Resizing NILFS2 file system on partition <filename>%1</filename> failed: "
"Could not create temp dir."
msgstr ""
"Storleksändring av NILFS2-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: Kunde inte skapa tillfällig katalog."

#: fs/nilfs2.cpp:159
msgctxt "@info/plain"
msgid ""
"Resizing NILFS2 file system on partition <filename>%1</filename> failed: "
"NILFS2 file system resize failed."
msgstr ""
"Storleksändring av NILFS2-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: storleksändring för NILFS2-filsystemet misslyckades."

#: fs/nilfs2.cpp:164
msgctxt "@info/plain"
msgid ""
"Warning: Resizing NILFS2 file system on partition <filename>%1</filename>: "
"Unmount failed."
msgstr ""
"Varning: Storleksändring av NILFS2-filsystemet på partitionen <filename>%1</"
"filename>: Avmontering misslyckades."

#: fs/nilfs2.cpp:167
msgctxt "@info/plain"
msgid ""
"Resizing NILFS2 file system on partition <filename>%1</filename> failed: "
"Initial mount failed."
msgstr ""
"Storleksändring av NILFS2-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: Ursprunglig montering misslyckades."

#: fs/linuxswap.cpp:127
msgctxt "@title:menu"
msgid "Activate swap"
msgstr "Aktivera växlingsminne"

#: fs/linuxswap.cpp:132
msgctxt "@title:menu"
msgid "Deactivate swap"
msgstr "Inaktivera växlingsminne"

#: fs/btrfs.cpp:140
msgctxt "@info/plain"
msgid ""
"Resizing Btrfs file system on partition <filename>%1</filename> failed: "
"Could not create temp dir."
msgstr ""
"Storleksändring av Btrfs-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: Kunde inte skapa tillfällig katalog."

#: fs/btrfs.cpp:155
msgctxt "@info/plain"
msgid ""
"Resizing Btrfs file system on partition <filename>%1</filename> failed: "
"btrfs file system resize failed."
msgstr ""
"Storleksändring av Btrfs-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: storleksändring för Btrfs-filsystemet misslyckades."

#: fs/btrfs.cpp:160
msgctxt "@info/plain"
msgid ""
"Warning: Resizing Btrfs file system on partition <filename>%1</filename>: "
"Unmount failed."
msgstr ""
"Varning: Storleksändring av Btrfs-filsystemet på partitionen <filename>%1</"
"filename>: Avmontering misslyckades."

#: fs/btrfs.cpp:163
msgctxt "@info/plain"
msgid ""
"Resizing Btrfs file system on partition <filename>%1</filename> failed: "
"Initial mount failed."
msgstr ""
"Storleksändring av Btrfs-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: Ursprunglig montering misslyckades."

#: fs/xfs.cpp:170
msgctxt "@info/plain"
msgid ""
"Resizing XFS file system on partition <filename>%1</filename> failed: Could "
"not create temp dir."
msgstr ""
"Storleksändring av XFS-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: Kunde inte skapa tillfällig katalog"

#: fs/xfs.cpp:185
msgctxt "@info/plain"
msgid ""
"Resizing XFS file system on partition <filename>%1</filename> failed: "
"xfs_growfs failed."
msgstr ""
"Storleksändring av XFS-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: xfs_growfs misslyckades."

#: fs/xfs.cpp:190
msgctxt "@info/plain"
msgid ""
"Warning: Resizing XFS file system on partition <filename>%1</filename>: "
"Unmount failed."
msgstr ""
"Varning: Storleksändring av XFS-filsystemet på partitionen <filename>%1</"
"filename>: Avmontering misslyckades."

#: fs/xfs.cpp:193
msgctxt "@info/plain"
msgid ""
"Resizing XFS file system on partition <filename>%1</filename> failed: "
"Initial mount failed."
msgstr ""
"Storleksändring av XFS-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: Ursprunglig montering misslyckades."

#: fs/filesystem.cpp:272
msgctxt "@item/plain filesystem name"
msgid "unknown"
msgstr "Okänt"

#: fs/filesystem.cpp:273
msgctxt "@item/plain filesystem name"
msgid "extended"
msgstr "Utökat"

#: fs/filesystem.cpp:275
msgctxt "@item/plain filesystem name"
msgid "ext2"
msgstr "Ext2"

#: fs/filesystem.cpp:276
msgctxt "@item/plain filesystem name"
msgid "ext3"
msgstr "Ext3"

#: fs/filesystem.cpp:277
msgctxt "@item/plain filesystem name"
msgid "ext4"
msgstr "Ext4"

#: fs/filesystem.cpp:278
msgctxt "@item/plain filesystem name"
msgid "linuxswap"
msgstr "Linux växlingsminne"

#: fs/filesystem.cpp:279
msgctxt "@item/plain filesystem name"
msgid "fat16"
msgstr "FAT16"

#: fs/filesystem.cpp:280
msgctxt "@item/plain filesystem name"
msgid "fat32"
msgstr "FAT32"

#: fs/filesystem.cpp:281
msgctxt "@item/plain filesystem name"
msgid "ntfs"
msgstr "NTFS"

#: fs/filesystem.cpp:282
msgctxt "@item/plain filesystem name"
msgid "reiser"
msgstr "Reiser"

#: fs/filesystem.cpp:283
msgctxt "@item/plain filesystem name"
msgid "reiser4"
msgstr "Reiser4"

#: fs/filesystem.cpp:284
msgctxt "@item/plain filesystem name"
msgid "xfs"
msgstr "XFS"

#: fs/filesystem.cpp:285
msgctxt "@item/plain filesystem name"
msgid "jfs"
msgstr "JFS"

#: fs/filesystem.cpp:286
msgctxt "@item/plain filesystem name"
msgid "hfs"
msgstr "HFS"

#: fs/filesystem.cpp:287
msgctxt "@item/plain filesystem name"
msgid "hfsplus"
msgstr "HFS plus"

#: fs/filesystem.cpp:288
msgctxt "@item/plain filesystem name"
msgid "ufs"
msgstr "UFS"

#: fs/filesystem.cpp:289
msgctxt "@item/plain filesystem name"
msgid "unformatted"
msgstr "Oformatterat"

#: fs/filesystem.cpp:290
msgctxt "@item/plain filesystem name"
msgid "btrfs"
msgstr "BTRFS"

#: fs/filesystem.cpp:291
msgctxt "@item/plain filesystem name"
msgid "hpfs"
msgstr "HPFS"

#: fs/filesystem.cpp:292
msgctxt "@item/plain filesystem name"
msgid "luks"
msgstr "LUKS"

#: fs/filesystem.cpp:293
msgctxt "@item/plain filesystem name"
msgid "ocfs2"
msgstr "OCFS2"

#: fs/filesystem.cpp:294
msgctxt "@item/plain filesystem name"
msgid "zfs"
msgstr "ZFS"

#: fs/filesystem.cpp:295
msgctxt "@item/plain filesystem name"
msgid "exfat"
msgstr "exfat"

#: fs/filesystem.cpp:296
msgctxt "@item/plain filesystem name"
msgid "nilfs2"
msgstr "nilfs2"

#: fs/filesystem.cpp:297
msgctxt "@item/plain filesystem name"
msgid "lvm2 pv"
msgstr "lvm2 pv"

#: fs/filesystem.cpp:341
msgctxt "@title:menu"
msgid "Mount"
msgstr "Montera"

#: fs/filesystem.cpp:347
msgctxt "@title:menu"
msgid "Unmount"
msgstr "Avmontera"

#: fs/luks.cpp:91
msgctxt "@title:menu"
msgid "Decrypt"
msgstr "Avkoda"

#: fs/luks.cpp:96
msgctxt "@title:menu"
msgid "Deactivate"
msgstr "Inaktivera"

#: fs/jfs.cpp:162
msgctxt "@info/plain"
msgid ""
"Resizing JFS file system on partition <filename>%1</filename> failed: Could "
"not create temp dir."
msgstr ""
"Storleksändring av JFS-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: Kunde inte skapa tillfällig katalog."

#: fs/jfs.cpp:177
msgctxt "@info/plain"
msgid ""
"Resizing JFS file system on partition <filename>%1</filename> failed: "
"Remount failed."
msgstr ""
"Storleksändring av JFS-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: Ommontering misslyckades."

#: fs/jfs.cpp:182
msgctxt "@info/plain"
msgid ""
"Warning: Resizing JFS file system on partition <filename>%1</filename>: "
"Unmount failed."
msgstr ""
"Varning: Storleksändring av JFS-filsystemet på partitionen <filename>%1</"
"filename>: Avmontering misslyckades."

#: fs/jfs.cpp:185
msgctxt "@info/plain"
msgid ""
"Resizing JFS file system on partition <filename>%1</filename> failed: "
"Initial mount failed."
msgstr ""
"Storleksändring av JFS-filsystemet på partitionen <filename>%1</filename> "
"misslyckades: Ursprunglig montering misslyckades."

#: main.cpp:38
msgctxt "@info:shell"
msgid "Do not try to gain super user privileges"
msgstr "Försök inte erhålla rättigheter som systemadministratör"

#: main.cpp:39
msgctxt "@info:shell"
msgid "Show advanced tab in configuration dialog"
msgstr "Visa fliken Avancerat i inställningsdialogrutan"

#: main.cpp:40
msgctxt "@info:shell"
msgid "Device(s) to manage"
msgstr "Enhet(er) att hantera"

#: ops/resizeoperation.cpp:165
msgctxt "@info/plain"
msgid "Moving extended partition <filename>%1</filename> failed."
msgstr "Misslyckades flytta utökad partition <filename>%1</filename>."

#: ops/resizeoperation.cpp:175
msgctxt "@info/plain"
msgid "Checking partition <filename>%1</filename> after resize/move failed."
msgstr ""
"Kontrollerar partitionen <filename>%1</filename> efter storleksändring eller "
"förflyttning misslyckats."

#: ops/resizeoperation.cpp:178
msgctxt "@info/plain"
msgid "Resizing/moving partition <filename>%1</filename> failed."
msgstr ""
"Misslyckades ändra storlek eller flytta partitionen <filename>%1</filename>."

#: ops/resizeoperation.cpp:182
msgctxt "@info/plain"
msgid "Checking partition <filename>%1</filename> before resize/move failed."
msgstr ""
"Kontrollerar partitionen <filename>%1</filename> innan storleksändring eller "
"förflyttning misslyckats."

#: ops/resizeoperation.cpp:186 ops/restoreoperation.cpp:165
#: ops/operation.cpp:178 ops/copyoperation.cpp:194
msgctxt "@info/plain status (success, error, warning...) of operation"
msgid "%1: %2"
msgstr "%1: %2"

#: ops/resizeoperation.cpp:213
msgctxt "@info/plain describe resize/move action"
msgid "Move partition <filename>%1</filename> to the left by %2"
msgstr "Flytta partitionen <filename>%1</filename> åt vänster med %2"

#: ops/resizeoperation.cpp:216
msgctxt "@info/plain describe resize/move action"
msgid "Move partition <filename>%1</filename> to the right by %2"
msgstr "Flytta partitionen <filename>%1</filename> åt höger med %2"

#: ops/resizeoperation.cpp:219
msgctxt "@info/plain describe resize/move action"
msgid "Grow partition <filename>%1</filename> from %2 to %3"
msgstr "Utöka partitionen <filename>%1</filename> från %2 till %3"

#: ops/resizeoperation.cpp:222
msgctxt "@info/plain describe resize/move action"
msgid "Shrink partition <filename>%1</filename> from %2 to %3"
msgstr "Krymp partitionen <filename>%1</filename> från %2 till %3"

#: ops/resizeoperation.cpp:225
msgctxt "@info/plain describe resize/move action"
msgid ""
"Move partition <filename>%1</filename> to the left by %2 and grow it from %3 "
"to %4"
msgstr ""
"Flytta partitionen <filename>%1</filename> åt vänster med %2 och utöka den "
"från %3 till %4"

#: ops/resizeoperation.cpp:228
msgctxt "@info/plain describe resize/move action"
msgid ""
"Move partition <filename>%1</filename> to the right by %2 and grow it from "
"%3 to %4"
msgstr ""
"Flytta partitionen <filename>%1</filename> åt höger med %2 och utöka den "
"från %3 till %4"

#: ops/resizeoperation.cpp:231
msgctxt "@info/plain describe resize/move action"
msgid ""
"Move partition <filename>%1</filename> to the left by %2 and shrink it from "
"%3 to %4"
msgstr ""
"Flytta partitionen <filename>%1</filename> åt vänster med %2 och krymp den "
"från %3 till %4"

#: ops/resizeoperation.cpp:234
msgctxt "@info/plain describe resize/move action"
msgid ""
"Move partition <filename>%1</filename> to the right by %2 and shrink it from "
"%3 to %4"
msgstr ""
"Flytta partitionen <filename>%1</filename> åt höger med %2 och krymp den "
"från %3 till %4"

#: ops/resizeoperation.cpp:241
msgctxt "@info/plain describe resize/move action"
msgid "Unknown resize/move action."
msgstr "Okänd åtgärd för storleksändring eller förflyttning"

#: ops/resizeoperation.cpp:271
msgctxt "@info/plain"
msgid ""
"Resize/move failed: Could not resize file system to shrink partition "
"<filename>%1</filename>."
msgstr ""
"Misslyckades ändra storlek eller flytta: Kunde inte ändra filsystemets "
"storlek för att krympa partitionen <filename>%1</filename>."

#: ops/resizeoperation.cpp:277
msgctxt "@info/plain"
msgid "Resize/move failed: Could not shrink partition <filename>%1</filename>."
msgstr ""
"Misslyckades ändra storlek eller flytta: Kunde inte krympa partitionen "
"<filename>%1</filename>."

#: ops/resizeoperation.cpp:297
msgctxt "@info/plain"
msgid "Moving partition <filename>%1</filename> failed."
msgstr "Misslyckades flytta partitionen <filename>%1</filename>."

#: ops/resizeoperation.cpp:303
msgctxt "@info/plain"
msgid ""
"Moving the filesystem for partition <filename>%1</filename> failed. Rolling "
"back."
msgstr ""
"Misslyckades flytta filsystemet för partitionen <filename>%1</filename>. "
"Återgår."

#: ops/resizeoperation.cpp:307
msgctxt "@info/plain"
msgid ""
"Moving back partition <filename>%1</filename> to its original position "
"failed."
msgstr ""
"Misslyckades flytta tillbaka partitionen <filename>%1</filename> till sin "
"ursprungliga position."

#: ops/resizeoperation.cpp:321
msgctxt "@info/plain"
msgid "Resize/move failed: Could not grow partition <filename>%1</filename>."
msgstr ""
"Misslyckades ändra storlek eller flytta: Kunde inte utöka partitionen "
"<filename>%1</filename>."

#: ops/resizeoperation.cpp:327
msgctxt "@info/plain"
msgid ""
"Resize/move failed: Could not resize the file system on partition <filename>"
"%1</filename>"
msgstr ""
"Misslyckades ändra storlek eller flytta: Kunde inte ändra filsystemets "
"storlek på partitionen <filename>%1</filename>"

#: ops/resizeoperation.cpp:330
msgctxt "@info/plain"
msgid ""
"Could not restore old partition size for partition <filename>%1</filename>."
msgstr ""
"Kunde inte återställa gammal partitionsstorlek för partitionen <filename>%1</"
"filename>."

#: ops/deleteoperation.cpp:86
msgctxt "@info/plain"
msgid "Shred partition <filename>%1</filename> (%2, %3)"
msgstr "Förstör partition <filename>%1</filename> (%2, %3)"

#: ops/deleteoperation.cpp:88
msgctxt "@info/plain"
msgid "Delete partition <filename>%1</filename> (%2, %3)"
msgstr "Ta bort partition <filename>%1</filename> (%2, %3)"

#: ops/setpartflagsoperation.cpp:77
msgctxt "@info/plain"
msgid "Set flags for partition <filename>%1</filename> to \"%2\""
msgstr "Sätt flaggor för partitionen <filename>%1</filename> till \"%2\""

#: ops/restoreoperation.cpp:144 ops/copyoperation.cpp:165
msgctxt "@info/plain"
msgid ""
"Warning: Maximizing file system on target partition <filename>%1</filename> "
"to the size of the partition failed."
msgstr ""
"Varning: Misslyckades maximera filsystemet på målpartitionen <filename>%1</"
"filename> till partitionens storlek."

#: ops/restoreoperation.cpp:147
msgctxt "@info/plain"
msgid ""
"Checking target file system on partition <filename>%1</filename> after the "
"restore failed."
msgstr ""
"Kontrollerar målfilsystemet på partitionen <filename>%1</filename> efter att "
"återställningen misslyckats."

#: ops/restoreoperation.cpp:154
msgctxt "@info/plain"
msgid "Restoring file system failed."
msgstr "Återställning av filsystemet misslyckades."

#: ops/restoreoperation.cpp:158
msgctxt "@info/plain"
msgid "Creating the destination partition to restore to failed."
msgstr "Misslyckades skapa målpartitionen att återställa till."

#: ops/restoreoperation.cpp:173
msgctxt "@info/plain"
msgid ""
"Restore partition from <filename>%1</filename> to <filename>%2</filename>"
msgstr ""
"Återställ partition fråm <filename>%1</filename> till <filename>%2</filename>"

#: ops/restoreoperation.cpp:175
msgctxt "@info/plain"
msgid ""
"Restore partition on <filename>%1</filename> at %2 from <filename>%3</"
"filename>"
msgstr ""
"Återställ partition på <filename>%1</filename> vid %2 från <filename>%3</"
"filename>"

#: ops/newoperation.cpp:113
msgctxt "@info/plain"
msgid "Create a new partition (%1, %2) on <filename>%3</filename>"
msgstr "Skapa en ny partition (%1, %2) på <filename>%3</filename>"

#: ops/createfilesystemoperation.cpp:97
msgctxt "@info/plain"
msgid "Create filesystem %1 on partition <filename>%2</filename>"
msgstr "Skapa filsystem %1 på partitionen <filename>%2</filename>"

#: ops/operation.cpp:75
msgctxt "@info:progress operation"
msgid "None"
msgstr "Ingen"

#: ops/operation.cpp:76
msgctxt "@info:progress operation"
msgid "Pending"
msgstr "Väntande"

#: ops/operation.cpp:77
msgctxt "@info:progress operation"
msgid "Running"
msgstr "Kör"

#: ops/operation.cpp:78
msgctxt "@info:progress operation"
msgid "Success"
msgstr "Lyckades"

#: ops/operation.cpp:79
msgctxt "@info:progress operation"
msgid "Warning"
msgstr "Varning"

#: ops/operation.cpp:80
msgctxt "@info:progress operation"
msgid "Error"
msgstr "Fel"

#: ops/checkoperation.cpp:62
msgctxt "@info/plain"
msgid "Check and repair partition <filename>%1</filename> (%2, %3)"
msgstr "Kontrollera och reparera partitionen <filename>%1</filename> (%2, %3)"

#: ops/copyoperation.cpp:170
msgctxt "@info/plain"
msgid "Checking target partition <filename>%1</filename> after copy failed."
msgstr ""
"Kontrollerar målpartitionen <filename>%1</filename> efter kopiering "
"misslyckats."

#: ops/copyoperation.cpp:180
msgctxt "@info/plain"
msgid "Copying source to target partition failed."
msgstr "Misslyckades kopiera källpartition till målpartition."

#: ops/copyoperation.cpp:184
msgctxt "@info/plain"
msgid "Creating target partition for copying failed."
msgstr "Misslyckades skapa målpartition för kopiering."

#: ops/copyoperation.cpp:187
msgctxt "@info/plain"
msgid "Checking source partition <filename>%1</filename> failed."
msgstr "Kontroll av källpartitionen <filename>%1</filename> misslyckades."

#: ops/copyoperation.cpp:204
msgctxt "@info/plain"
msgid ""
"Copy partition <filename>%1</filename> (%2, %3) to <filename>%4</filename> "
"(%5, %6)"
msgstr ""
"Kopiera partition <filename>%1</filename> (%2, %3) till <filename>%4</"
"filename> (%5, %6)"

#: ops/copyoperation.cpp:213
msgctxt "@info/plain"
msgid ""
"Copy partition <filename>%1</filename> (%2, %3) to <filename>%4</filename> "
"(%5, %6) and grow it to %7"
msgstr ""
"Kopiera partition <filename>%1</filename> (%2, %3) till <filename>%4</"
"filename> (%5, %6) och utöka den till %7"

#: ops/copyoperation.cpp:225
msgctxt "@info/plain"
msgid ""
"Copy partition <filename>%1</filename> (%2, %3) to unallocated space "
"(starting at %4) on <filename>%5</filename>"
msgstr ""
"Kopiera partitionen <filename>%1</filename> (%2, %3) till icke tilldelat "
"utrymme (med början på %4) på <filename>%5</filename>"

#: ops/copyoperation.cpp:233
msgctxt "@info/plain"
msgid ""
"Copy partition <filename>%1</filename> (%2, %3) to unallocated space "
"(starting at %4) on <filename>%5</filename> and grow it to %6"
msgstr ""
"Kopiera partitionen <filename>%1</filename> (%2, %3) till icke tilldelat "
"utrymme (med början på %4) på <filename>%5</filename> och utöka den till %6"

#: ops/createpartitiontableoperation.cpp:103
msgctxt "@info/plain"
msgid "Create a new partition table (type: %1) on <filename>%2</filename>"
msgstr "Skapa en ny partitionstabell (typ: %1) på <filename>%2</filename>"

#: ops/backupoperation.cpp:51
msgctxt "@info/plain"
msgid ""
"Backup partition <filename>%1</filename> (%2, %3) to <filename>%4</filename>"
msgstr ""
"Säkerhetskopiera partition <filename>%1</filename> (%2, %3) till <filename>"
"%4</filename>"

#: ops/setfilesystemlabeloperation.cpp:71
msgctxt "@info/plain"
msgid "Set label for partition <filename>%1</filename> to \"%2\""
msgstr "Ställ in etikett för partitionen <filename>%1</filename> till \"%2\""

#: ops/setfilesystemlabeloperation.cpp:73
msgctxt "@info/plain"
msgid "Set label for partition <filename>%1</filename> from \"%2\" to \"%3\""
msgstr ""
"Ändra etikett för partitionen <filename>%1</filename> från \"%2\" till \"%3\""

#: core/partition.cpp:161
msgctxt "@item partition name"
msgid "unallocated"
msgstr "inte tilldelad"

#: core/partition.cpp:164
msgctxt "@item partition name"
msgid "New Partition"
msgstr "Ny partition"

#: core/partition.cpp:167
msgctxt "@item partition name"
msgid "Restored Partition"
msgstr "Återställde partition"

#: core/partition.cpp:170
msgctxt "@item partition name"
msgid "Copy of %1"
msgstr "Kopia av %1"

#: core/partitiontable.cpp:158
msgctxt "@item partition flag"
msgid "boot"
msgstr "start"

#: core/partitiontable.cpp:159
msgctxt "@item partition flag"
msgid "root"
msgstr "rot"

#: core/partitiontable.cpp:160
msgctxt "@item partition flag"
msgid "swap"
msgstr "växlingsminne"

#: core/partitiontable.cpp:161
msgctxt "@item partition flag"
msgid "hidden"
msgstr "dold"

#: core/partitiontable.cpp:162
msgctxt "@item partition flag"
msgid "raid"
msgstr "raid"

#: core/partitiontable.cpp:163
msgctxt "@item partition flag"
msgid "lvm"
msgstr "lvm"

#: core/partitiontable.cpp:164
msgctxt "@item partition flag"
msgid "lba"
msgstr "LBA"

#: core/partitiontable.cpp:165
msgctxt "@item partition flag"
msgid "hpservice"
msgstr "hp-tjänst"

#: core/partitiontable.cpp:166
msgctxt "@item partition flag"
msgid "palo"
msgstr "palo"

#: core/partitiontable.cpp:167
msgctxt "@item partition flag"
msgid "prep"
msgstr "prep"

#: core/partitiontable.cpp:168
msgctxt "@item partition flag"
msgid "msft-reserved"
msgstr "msft-reserverad"

#: core/partitiontable.cpp:404
msgctxt "@item/plain partition table name"
msgid "unknown"
msgstr "okänt"

#: core/partitionalignment.cpp:89
msgctxt "@info/plain"
msgid ""
"Partition <filename>%1</filename> is not properly aligned (first sector: %2, "
"modulo: %3)."
msgstr ""
"Partitionen <filename>%1</filename> är inte riktigt justerad (första sektor: "
"%2, modulo: %3)."

#: core/partitionalignment.cpp:92
msgctxt "@info/plain"
msgid ""
"Partition <filename>%1</filename> is not properly aligned (last sector: %2, "
"modulo: %3)."
msgstr ""
"Partitionen <filename>%1</filename> är inte riktigt justerad (sista sektor: "
"%2, modulo: %3)."

#: core/operationstack.cpp:112
msgctxt "@info/plain"
msgid ""
"Deleting a partition just created: Undoing the operation to create the "
"partition."
msgstr ""
"Borttagning av en partition som just skapats: Ångrar åtgärden att skapa "
"partitionen."

#: core/operationstack.cpp:131
msgctxt "@info/plain"
msgid ""
"Resizing a partition just created: Updating start and end in existing "
"operation."
msgstr ""
"Storleksändring av en partition som just skapats: Uppdaterar start och slut "
"i befintlig åtgärd."

#: core/operationstack.cpp:152
msgctxt "@info/plain"
msgid "Copying a new partition: Creating a new partition instead."
msgstr "Kopiera en ny partition: Skapar en ny partition istället."

#: core/operationstack.cpp:170
msgctxt "@info/plain"
msgid "Changing label for a new partition: No new operation required."
msgstr "Ändrar etikett för en ny partition: Ingen ny åtgärd krävs."

#: core/operationstack.cpp:184
msgctxt "@info/plain"
msgid "Changing file system for a new partition: No new operation required."
msgstr "Ändrar filsystem för en ny partition: Ingen ny åtgärd krävs."

#: core/operationstack.cpp:202
msgctxt "@info/plain"
msgid ""
"Checking file systems is automatically done when creating them: No new "
"operation required."
msgstr ""
"Kontroll av filsystem utförs automatiskt när de skapas: Ingen ny åtgärd "
"krävs."

#: core/operationstack.cpp:251
msgctxt "@info/plain"
msgid "Deleting a partition just copied: Removing the copy."
msgstr "Tar bort en partition som just kopierades. Tar bort kopian."

#: core/operationstack.cpp:258
msgctxt "@info/plain"
msgid ""
"Deleting a partition just copied over an existing partition: Removing the "
"copy and deleting the existing partition."
msgstr ""
"Borttagning av en partition som just kopierades över en befintlig partition: "
"Utför inte kopieringen och tar bort den befintliga partitionen."

#: core/operationstack.cpp:272
msgctxt "@info/plain"
msgid ""
"Copying a partition that is itself a copy: Copying the original source "
"partition instead."
msgstr ""
"Kopiering av en partition som själv är en kopia: Kopierar den ursprungliga "
"källpartitionen istället."

#: core/operationstack.cpp:303
msgctxt "@info/plain"
msgid "Deleting a partition just restored: Removing the restore operation."
msgstr ""
"Tar bort en partition som just återställdes: Tar bort återställningsåtgärden."

#: core/operationstack.cpp:310
msgctxt "@info/plain"
msgid ""
"Deleting a partition just restored to an existing partition: Removing the "
"restore operation and deleting the existing partition."
msgstr ""
"Borttagning av en partition som just återställdes till en befintlig "
"partition: Utför inte återställningsåtgärden och tar bort den befintliga "
"partitionen."

#: core/operationstack.cpp:344
msgctxt "@info/plain"
msgid "Changing flags again for the same partition: Removing old operation."
msgstr "Ändrar flaggor igen för samma partition. Tar bort gammal åtgärd."

#: core/operationstack.cpp:376
msgctxt "@info/plain"
msgid "Changing label again for the same partition: Removing old operation."
msgstr "Ändrar etikett igen för samma partition. Tar bort gammal åtgärd."

#: core/operationstack.cpp:403
msgctxt "@info/plain"
msgid "Creating new partition table, discarding previous operation on device."
msgstr ""
"Skapar en ny partitionstabell,  och överger föregående åtgärd för enheten."

#: core/operationstack.cpp:454
msgctxt "@info/plain"
msgid "Add operation: %1"
msgstr "Lägg till åtgärd: %1"

#: core/partitionrole.cpp:29
msgctxt "@item partition role"
msgid "unallocated"
msgstr "inte tilldelad"

#: core/partitionrole.cpp:32
msgctxt "@item partition role"
msgid "logical"
msgstr "logisk"

#: core/partitionrole.cpp:35
msgctxt "@item partition role"
msgid "extended"
msgstr "utökad"

#: core/partitionrole.cpp:38
msgctxt "@item partition role"
msgid "primary"
msgstr "primär"

#: core/partitionrole.cpp:40
msgctxt "@item partition role"
msgid "none"
msgstr "ingen"

#: core/device.cpp:90
msgid "Unknown Device"
msgstr "Okänd enhet"

#: core/smartattribute.cpp:55
msgctxt "@item:intable"
msgid "failing"
msgstr "håller på att gå sönder"

#: core/smartattribute.cpp:58
msgctxt "@item:intable"
msgid "has failed"
msgstr "har gått sönder"

#: core/smartattribute.cpp:61
msgctxt "@item:intable"
msgid "warning"
msgstr "varning"

#: core/smartattribute.cpp:64
msgctxt "@item:intable"
msgid "good"
msgstr "bra"

#: core/smartattribute.cpp:68 core/smartattribute.cpp:96
msgctxt "@item:intable not applicable"
msgid "N/A"
msgstr "Inte tillgänglig"

#: core/smartattribute.cpp:83
msgctxt "@item:intable"
msgid "%1 sector"
msgid_plural "%1 sectors"
msgstr[0] "%1 sektor"
msgstr[1] "%1 sektorer"

#: core/smartattribute.cpp:114
msgctxt "SMART attr name"
msgid "Read Error Rate"
msgstr "Läsfelfrekvens"

#: core/smartattribute.cpp:114
msgctxt "SMART attr description"
msgid "Rate of hardware read errors while reading data from the disk surface."
msgstr "Frekvens av läsfel i hårdvara när data läses från diskytan."

#: core/smartattribute.cpp:115
msgctxt "SMART attr name"
msgid "Throughput Performance"
msgstr "Genomströmningsprestanda"

#: core/smartattribute.cpp:115
msgctxt "SMART attr description"
msgid ""
"Overall (general) throughput performance of a hard disk drive. If the value "
"of this attribute is decreasing there is a high probability that there is a "
"problem with the disk."
msgstr ""
"Övergripande (generell) genomströmningsprestanda för en hårddiskenhet. Om "
"värdet av egenskapen minskar är det stor sannolikhet att det finns ett fel "
"med disken."

#: core/smartattribute.cpp:116
msgctxt "SMART attr name"
msgid "Spin-Up Time"
msgstr "Igångspinntid"

#: core/smartattribute.cpp:116
msgctxt "SMART attr description"
msgid "Average time of spindle spin up from zero RPM to fully operational."
msgstr ""
"Medeltid för axelns igångspinntid från noll varv/min till fullständigt "
"operationell"

#: core/smartattribute.cpp:117
msgctxt "SMART attr name"
msgid "Start/Stop Count"
msgstr "Antal start och stopp"

#: core/smartattribute.cpp:117
msgctxt "SMART attr description"
msgid "A tally of spindle start/stop cycles."
msgstr "En sammanräkning av axelns start- och stoppcykler."

#: core/smartattribute.cpp:118
msgctxt "SMART attr name"
msgid "Reallocated Sectors Count"
msgstr "Antal omfördelade sektorer"

#: core/smartattribute.cpp:118
msgctxt "SMART attr description"
msgid ""
"Count of reallocated sectors. When the hard drive finds a read/write/"
"verification error, it marks this sector as &quot;reallocated&quot; and "
"transfers data to a special reserved area (spare area)."
msgstr ""
"Antal  omfördelade sektorer. När hårddisken hittar ett fel vid läs/skriv "
"verifikation, markeras sektorn som &quot;omfördelad&quot; och data överförs "
"till ett särskilt reserverat område (reservområde)."

#: core/smartattribute.cpp:119
msgctxt "SMART attr name"
msgid "Read Channel Margin"
msgstr "Marginal för läskanal"

#: core/smartattribute.cpp:119
msgctxt "SMART attr description"
msgid ""
"Margin of a channel while reading data. The function of this attribute is "
"not specified."
msgstr ""
"Marginal för en kanal medan data läses. Funktionen av egenskapen är inte "
"specificerad."

#: core/smartattribute.cpp:120
msgctxt "SMART attr name"
msgid "Seek Error Rate"
msgstr "Sökfelfrekvens"

#: core/smartattribute.cpp:120
msgctxt "SMART attr description"
msgid ""
"Rate of seek errors of the magnetic heads. If there is a partial failure in "
"the mechanical positioning system, then seek errors will arise."
msgstr ""
"Frekvens av sökfel för de magnetiska huvudena. Om det finns ett partiellt "
"fel i det mekaniska positioneringssystemet, kommer sökfel att uppstå."

#: core/smartattribute.cpp:121
msgctxt "SMART attr name"
msgid "Seek Time Performance"
msgstr "Söktidsprestanda"

#: core/smartattribute.cpp:121
msgctxt "SMART attr description"
msgid ""
"Average performance of seek operations of the magnetic heads. If this "
"attribute is decreasing, it is a sign of problems in the mechanical "
"subsystem."
msgstr ""
"Sökoperationernas medelprestanda för de magnetiska huvudena. Om egenskapen "
"minskar, är det ett tecken på problem med det mekaniska delsystemet."

#: core/smartattribute.cpp:122
msgctxt "SMART attr name"
msgid "Power-On Hours"
msgstr "Antal timmar igång"

#: core/smartattribute.cpp:122
msgctxt "SMART attr description"
msgid "Count of hours in power-on state."
msgstr "Antal timmar i påslaget tillstånd."

#: core/smartattribute.cpp:123
msgctxt "SMART attr name"
msgid "Spin Retry Count"
msgstr "Antal upprepade spinnförsök"

#: core/smartattribute.cpp:123
msgctxt "SMART attr description"
msgid ""
"Count of retry of spin start attempts if the first attempt was unsuccessful. "
"An increase of this attribute value is a sign of problems in the hard disk "
"mechanical subsystem."
msgstr ""
"Antal upprepade spinnstartförsök om det första försöket misslyckades. En "
"ökning av egenskapens värde är ett tecken på problem i hårddiskens mekaniska "
"delsystem."

#: core/smartattribute.cpp:124
msgctxt "SMART attr name"
msgid "Recalibration Retries"
msgstr "Antal omkalibreringsförsök"

#: core/smartattribute.cpp:124
msgctxt "SMART attr description"
msgid ""
"Count of recalibrations requested if the first attempt was unsuccessful. An "
"increase of this attribute value is a sign of problems in the hard disk "
"mechanical subsystem."
msgstr ""
"Antal begärda omkalibreringsförsök om det första försöket misslyckades. En "
"ökning av egenskapens värde är ett tecken på problem i hårddiskens mekaniska "
"delsystem."

#: core/smartattribute.cpp:125
msgctxt "SMART attr name"
msgid "Power Cycle Count"
msgstr "Antal kraftcykler"

#: core/smartattribute.cpp:125
msgctxt "SMART attr description"
msgid "Count of full hard disk power on/off cycles."
msgstr "Antal fullständiga cykler hårddiskens kraft satts på och stängts av."

#: core/smartattribute.cpp:126 core/smartattribute.cpp:145
msgctxt "SMART attr name"
msgid "Soft Read Error Rate"
msgstr "Mjuk läsfelsfrekvens"

#: core/smartattribute.cpp:126
msgctxt "SMART attr description"
msgid "Uncorrected read errors reported to the operating system."
msgstr "Ej korrigerade läsfel rapporterade till operativsystemet."

#: core/smartattribute.cpp:127
msgctxt "SMART attr name"
msgid "SATA Downshift Error Count"
msgstr "Antal SATA-nerskiftningsfel"

#: core/smartattribute.cpp:127
msgctxt "SMART attr description"
msgid "Western Digital and Samsung attribute."
msgstr "Egenskap för Western Digital och Samsung."

#: core/smartattribute.cpp:128
msgctxt "SMART attr name"
msgid "End-to-End Error"
msgstr "Genomgående fel"

#: core/smartattribute.cpp:128
msgctxt "SMART attr description"
msgid ""
"Part of HP's SMART IV technology: After transferring through the cache RAM "
"data buffer the parity data between the host and the hard drive did not "
"match."
msgstr ""
"Del av HP:s SMART IV-teknologi. Efter överföring genom cacheminnets "
"databuffert stämde inte paritetsdata mellan värddatorn och hårddisken."

#: core/smartattribute.cpp:129
msgctxt "SMART attr name"
msgid "Head Stability"
msgstr "Huvudstabilitet"

#: core/smartattribute.cpp:129 core/smartattribute.cpp:130
msgctxt "SMART attr description"
msgid "Western Digital attribute."
msgstr "Egenskap för Western Digital."

#: core/smartattribute.cpp:130
msgctxt "SMART attr name"
msgid "Induced Op-Vibration Detection"
msgstr "Detektering av vibrationer inducerade under användning"

#: core/smartattribute.cpp:131
msgctxt "SMART attr name"
msgid "Reported Uncorrectable Errors"
msgstr "Rapporterade ej korrigerbara fel"

#: core/smartattribute.cpp:131
msgctxt "SMART attr description"
msgid "Count of errors that could not be recovered using hardware ECC."
msgstr "Antal fel som inte kunde återställas med felrättande kod i hårdvara"

#: core/smartattribute.cpp:132
msgctxt "SMART attr name"
msgid "Command Timeout"
msgstr "Tidsgräns för kommando överskreds"

#: core/smartattribute.cpp:132
msgctxt "SMART attr description"
msgid "Count of aborted operations due to HDD timeout."
msgstr ""
"Antal avbrutna operationer på grund av överskriden tidsgräns i hårddisken."

#: core/smartattribute.cpp:133
msgctxt "SMART attr name"
msgid "High Fly Writes"
msgstr "Skrivningar med hög flygning"

#: core/smartattribute.cpp:133
msgctxt "SMART attr description"
msgid "Count of fly height errors detected."
msgstr "Antal detekterade flyghöjdsfel."

#: core/smartattribute.cpp:134
msgctxt "SMART attr name"
msgid "Temperature Difference From 100"
msgstr "Temperaturskillnad från 100"

#: core/smartattribute.cpp:134
msgctxt "SMART attr description"
msgid ""
"Value is equal to (100 &ndash; temp. °C), allowing manufacturer to set a "
"minimum threshold which corresponds to a maximum temperature."
msgstr ""
"Värdet är lika med (100 &ndash; temperatur i °C), vilket låter tillverkare "
"ställa in en minimal tröskel, som motsvarar maximal temperatur."

#: core/smartattribute.cpp:135
msgctxt "SMART attr name"
msgid "G-sense Error Rate"
msgstr "Felfrekvens för G-avkänning"

#: core/smartattribute.cpp:135
msgctxt "SMART attr description"
msgid "Count of errors resulting from externally-induced shock and vibration."
msgstr "Antal fel orsakade av externt inducerad shock och vibration."

#: core/smartattribute.cpp:136
msgctxt "SMART attr name"
msgid "Power Off Retract Count"
msgstr "Antal avstängningsåtergångscykler"

#: core/smartattribute.cpp:136
msgctxt "SMART attr description"
msgid "Count of power-off or emergency retract cycles"
msgstr "Antal avstängnings- eller nödåtergångscykler"

#: core/smartattribute.cpp:137
msgctxt "SMART attr name"
msgid "Load Cycle Count"
msgstr "Antal belastningscykler"

#: core/smartattribute.cpp:137
msgctxt "SMART attr description"
msgid "Count of load/unload cycles into head landing zone position."
msgstr ""
"Antal lastnings- och lossningscykler till huvudlandningszonens position"

#: core/smartattribute.cpp:138 core/smartattribute.cpp:166
msgctxt "SMART attr name"
msgid "Temperature"
msgstr "Temperatur"

#: core/smartattribute.cpp:138
msgctxt "SMART attr description"
msgid "Current internal temperature."
msgstr "Nuvarande interna temperatur."

#: core/smartattribute.cpp:139
msgctxt "SMART attr name"
msgid "Hardware ECC Recovered"
msgstr "Återställda av felrättande kod i hårdvara"

#: core/smartattribute.cpp:139
msgctxt "SMART attr description"
msgid "Count of errors that could be recovered using hardware ECC."
msgstr ""
"Antal fel som kunde återställas genom att använda felrättande kod i hårdvara"

#: core/smartattribute.cpp:140
msgctxt "SMART attr name"
msgid "Reallocation Event Count"
msgstr "Antal omfördelningshändelser"

#: core/smartattribute.cpp:140
msgctxt "SMART attr description"
msgid ""
"Count of remap operations. The raw value of this attribute shows the total "
"number of attempts to transfer data from reallocated sectors to a spare area."
msgstr ""
"Antal avbildningsändringar. Egenskapens obehandlade värde visar det totala "
"antalet försök att överföra data från omfördelade sektorer till ett ledigt "
"område."

#: core/smartattribute.cpp:141
msgctxt "SMART attr name"
msgid "Current Pending Sector Count"
msgstr "Aktuellt antal väntande sektorer"

#: core/smartattribute.cpp:141
msgctxt "SMART attr description"
msgid ""
"Number of &quot;unstable&quot; sectors (waiting to be remapped, because of "
"read errors)."
msgstr ""
"Antal &quot;instabila&quot; sektorer (som väntar på avbildningsändring på "
"grund av läsfel)"

#: core/smartattribute.cpp:142
msgctxt "SMART attr name"
msgid "Uncorrectable Sector Count"
msgstr "Antal ej korrigerade sektorer"

#: core/smartattribute.cpp:142
msgctxt "SMART attr description"
msgid "Count of uncorrectable errors when reading/writing a sector."
msgstr ""
"Antal ej korrigerade sektorer vid läsning eller skrivning av en sektor."

#: core/smartattribute.cpp:143
msgctxt "SMART attr name"
msgid "UltraDMA CRC Error Count"
msgstr "Antal CRC-fel för UltraDMA"

#: core/smartattribute.cpp:143
msgctxt "SMART attr description"
msgid ""
"Count of errors in data transfer via the interface cable as determined by "
"ICRC."
msgstr "Antal fel i dataöverföring via gränssnittskabeln som avgörs av ICRC."

#: core/smartattribute.cpp:144
msgctxt "SMART attr name"
msgid "Multi-Zone Error Rate<br/>Write Error Rate"
msgstr "Felfrekvens för multizon<br/>Skrivfelfrekvens"

#: core/smartattribute.cpp:144
msgctxt "SMART attr description"
msgid "The total number of errors when writing a sector."
msgstr "Totalt antal fel när en sektor skrivs."

#: core/smartattribute.cpp:145
msgctxt "SMART attr description"
msgid "Number of off-track errors."
msgstr "Antal fel utanför spår."

#: core/smartattribute.cpp:146
msgctxt "SMART attr name"
msgid "Data Address Mark Errors"
msgstr "Markeringsfel för dataadress"

#: core/smartattribute.cpp:146
msgctxt "SMART attr description"
msgid "Number of Data Address Mark errors (or vendor-specific)."
msgstr "Antal markeringsfel för dataadress (eller tillverkarspecifik)."

#: core/smartattribute.cpp:147
msgctxt "SMART attr name"
msgid "Run Out Cancel"
msgstr "Ogiltig felkorrigering"

#: core/smartattribute.cpp:147
msgctxt "SMART attr description"
msgid "Number of ECC errors"
msgstr "Antal fel upptäckta av felrättande kod"

#: core/smartattribute.cpp:148
msgctxt "SMART attr name"
msgid "Soft ECC Correction"
msgstr "Mjuk korrigering med felrättande kod"

#: core/smartattribute.cpp:148
msgctxt "SMART attr description"
msgid "Number of errors corrected by software ECC"
msgstr "Antal fel som korrigerades av felrättande kod i programvara"

#: core/smartattribute.cpp:149
msgctxt "SMART attr name"
msgid "Thermal Asperity Rate"
msgstr "Termisk svårighetsfrekvens"

#: core/smartattribute.cpp:149
msgctxt "SMART attr description"
msgid "Number of errors due to high temperature."
msgstr "Antal fel orsakade av hög temperatur."

#: core/smartattribute.cpp:150
msgctxt "SMART attr name"
msgid "Flying Height"
msgstr "Flyghöjd"

#: core/smartattribute.cpp:150
msgctxt "SMART attr description"
msgid ""
"Height of heads above the disk surface. A flying height that is too low "
"increases the chances of a head crash while a flying height that is too high "
"increases the chances of a read/write error."
msgstr ""
"Huvudenas höjd över skivytan. En flyghöjd som är för låg ökar risken för en "
"huvudkrasch, medan en flyghöjd som är för hög ökar risken för läs- eller "
"skrivfel."

#: core/smartattribute.cpp:151
msgctxt "SMART attr name"
msgid "Spin High Current"
msgstr "Högsta spinnström"

#: core/smartattribute.cpp:151
msgctxt "SMART attr description"
msgid "Amount of surge current used to spin up the drive."
msgstr "Storleken på stötström använd för att spinna igång enheten."

#: core/smartattribute.cpp:152
msgctxt "SMART attr name"
msgid "Spin Buzz"
msgstr "Spinnsurr"

#: core/smartattribute.cpp:152
msgctxt "SMART attr description"
msgid ""
"Number of buzz routines needed to spin up the drive due to insufficient "
"power."
msgstr ""
"Antal startrutiner som behövdes för att spinna igång enheten på grund av "
"otillräcklig kraft."

#: core/smartattribute.cpp:153
msgctxt "SMART attr name"
msgid "Offline Seek Performance"
msgstr "Nerkopplad sökprestanda "

#: core/smartattribute.cpp:153
msgctxt "SMART attr description"
msgid "Drive's seek performance during its internal tests."
msgstr "Enhetens sökprestanda under dess interna tester."

#: core/smartattribute.cpp:154
msgctxt "SMART attr name"
msgid "Vibration During Write"
msgstr "Vibration under skrivning"

#: core/smartattribute.cpp:154
msgctxt "SMART attr description"
msgid "Vibration During Write"
msgstr "Vibration under skrivning"

#: core/smartattribute.cpp:155
msgctxt "SMART attr name"
msgid "Shock During Write"
msgstr "Chock under skrivning"

#: core/smartattribute.cpp:155
msgctxt "SMART attr description"
msgid "Shock During Write"
msgstr "Chock under skrivning"

#: core/smartattribute.cpp:156
msgctxt "SMART attr name"
msgid "Disk Shift"
msgstr "Skivförflyttning"

#: core/smartattribute.cpp:156
msgctxt "SMART attr description"
msgid ""
"Distance the disk has shifted relative to the spindle (usually due to shock "
"or temperature)."
msgstr ""
"Avståndet skivan har flyttats i förhållande till axeln (oftast på grund av "
"chock eller temperatur)."

#: core/smartattribute.cpp:157
msgctxt "SMART attr name"
msgid "G-Sense Error Rate"
msgstr "Felfrekvens för G-avkänning"

#: core/smartattribute.cpp:157
msgctxt "SMART attr description"
msgid ""
"The number of errors resulting from externally-induced shock and vibration."
msgstr "Antalet fel orsakade av externt inducerad shock och vibration."

#: core/smartattribute.cpp:158
msgctxt "SMART attr name"
msgid "Loaded Hours"
msgstr "Timmar belastad"

#: core/smartattribute.cpp:158
msgctxt "SMART attr description"
msgid "Time spent operating under data load."
msgstr "Förfluten tid med databelastning under gång."

#: core/smartattribute.cpp:159
msgctxt "SMART attr name"
msgid "Load/Unload Retry Count"
msgstr "Antal upprepade lastnings- och lossningsförsök"

#: core/smartattribute.cpp:159
msgctxt "SMART attr description"
msgid "Number of times head changes position."
msgstr "Antal gånger huvudet ändrar position."

#: core/smartattribute.cpp:160
msgctxt "SMART attr name"
msgid "Load Friction"
msgstr "Belastningsfriktion"

#: core/smartattribute.cpp:160
msgctxt "SMART attr description"
msgid "Resistance caused by friction in mechanical parts while operating."
msgstr "Motstånd orsakad av friktion i mekaniska delar under gång."

#: core/smartattribute.cpp:161
msgctxt "SMART attr name"
msgid "Load/Unload Cycle Count"
msgstr "Antal lastnings- och lossningscykler"

#: core/smartattribute.cpp:161
msgctxt "SMART attr description"
msgid "Total number of load cycles."
msgstr "Totalt antal belastningscykler."

#: core/smartattribute.cpp:162
msgctxt "SMART attr name"
msgid "Load-In Time"
msgstr "Belastningstid"

#: core/smartattribute.cpp:162
msgctxt "SMART attr description"
msgid ""
"Total time of loading on the magnetic heads actuator (time not spent in "
"parking area)."
msgstr ""
"Total belastningstid för magnethuvudenas drivenhet (tid som inte tillbringas "
"i parkeringsområdet)."

#: core/smartattribute.cpp:163
msgctxt "SMART attr name"
msgid "Torque Amplification Count"
msgstr "Antal förstärkningar av vridmoment"

#: core/smartattribute.cpp:163
msgctxt "SMART attr description"
msgid "Number of attempts to compensate for platter speed variations."
msgstr "Antal försök att kompensera för skillnader i skivhastighet."

#: core/smartattribute.cpp:164
msgctxt "SMART attr name"
msgid "Power-Off Retract Cycle"
msgstr "Avstängningsåtergångscykler"

#: core/smartattribute.cpp:164
msgctxt "SMART attr description"
msgid ""
"The number of times the magnetic armature was retracted automatically as a "
"result of cutting power."
msgstr ""
"Antal gånger som magnetarmaturen återgick automatiskt som resultat av att "
"kraften stängdes av."

#: core/smartattribute.cpp:165
msgctxt "SMART attr name"
msgid "GMR Head Amplitude"
msgstr "GMR huvudamplitud"

#: core/smartattribute.cpp:165
msgctxt "SMART attr description"
msgid ""
"Amplitude of &quot;thrashing&quot; (distance of repetitive forward/reverse "
"head motion)"
msgstr ""
"Amplitud för &quot;värdelösa rörelser&quot; (avstånd för repetitiva "
"huvudrörelser fram och tillbaka)"

#: core/smartattribute.cpp:166
msgctxt "SMART attr description"
msgid "Drive Temperature"
msgstr "Enhetstemperatur"

#: core/smartattribute.cpp:167
msgctxt "SMART attr name"
msgid "Endurance Remaining"
msgstr "Återstående tålighet"

#: core/smartattribute.cpp:167
msgctxt "SMART attr description"
msgid ""
"Count of physical erase cycles completed on the drive as a percentage of the "
"maximum physical erase cycles the drive supports"
msgstr ""
"Antal fysiska raderingscykler färdiggjorda för enheten som procent av det "
"totala antalet fysiska raderingscykler som enheten stöder"

#: core/smartattribute.cpp:168
msgctxt "SMART attr name"
msgid "Power-On Seconds"
msgstr "Antal sekunder igång"

#: core/smartattribute.cpp:168
msgctxt "SMART attr description"
msgid "Time elapsed in the power-on state"
msgstr "Förfluten tid i påslaget tillstånd"

#: core/smartattribute.cpp:169
msgctxt "SMART attr name"
msgid "Unrecoverable ECC Count"
msgstr "Antal fel som inte kunde återställas av felrättande kod"

#: core/smartattribute.cpp:169
msgctxt "SMART attr description"
msgid "Count of unrecoverable ECC errors"
msgstr "Antal fel som inte kunde återställas av felrättande kod"

#: core/smartattribute.cpp:170
msgctxt "SMART attr name"
msgid "Good Block Rate"
msgstr "Frekvens av användbara block"

#: core/smartattribute.cpp:170
msgctxt "SMART attr description"
msgid ""
"Count of available reserved blocks as percentage of the total number of "
"reserved blocks"
msgstr ""
"Antal tillgängliga reserverade block, som procent av totalt antal "
"reserverande block"

#: core/smartattribute.cpp:171
msgctxt "SMART attr name"
msgid "Head Flying Hours<br/>or Transfer Error Rate (Fujitsu)"
msgstr "Antal timmar huvud används<br/>eller överföringsfelfrekvens (Fujitsu)"

#: core/smartattribute.cpp:171
msgctxt "SMART attr description"
msgid ""
"Time while head is positioning<br/>or counts the number of times the link is "
"reset during a data transfer."
msgstr ""
"Tid medan huvudet flyttas<br/>eller räknar antal gånger länken återställs "
"under en dataöverföring."

#: core/smartattribute.cpp:172
msgctxt "SMART attr name"
msgid "Total LBAs Written"
msgstr "Totalt antal LBA:er skrivna"

#: core/smartattribute.cpp:172
msgctxt "SMART attr description"
msgid "Total LBAs Written"
msgstr "Totalt antal LBA:er skrivna"

#: core/smartattribute.cpp:173
msgctxt "SMART attr name"
msgid "Total LBAs Read"
msgstr "Totalt antal LBA:er lästa"

#: core/smartattribute.cpp:173
msgctxt "SMART attr description"
msgid "Total LBAs Read"
msgstr "Totalt antal LBA:er lästa"

#: core/smartattribute.cpp:174
msgctxt "SMART attr name"
msgid "Read Error Retry Rate"
msgstr "Felfrekvens för omläsning"

#: core/smartattribute.cpp:174
msgctxt "SMART attr description"
msgid "Number of errors while reading from a disk"
msgstr "Antal fel vid läsning från en disk"

#: core/smartattribute.cpp:175
msgctxt "SMART attr name"
msgid "Free Fall Protection"
msgstr "Skydd mot fritt fall"

#: core/smartattribute.cpp:175
msgctxt "SMART attr description"
msgid "Number of &quot;Free Fall Events&quot; detected"
msgstr "Antal detekterade &quot;fritt fall&quot; händelser"

#: core/smartstatus.cpp:209
msgctxt "@item:intable degrees in Celsius and Fahrenheit"
msgid "%1° C / %2° F"
msgstr "%1° C / %2° F"

#: core/smartstatus.cpp:217
msgctxt "@item"
msgid "Aborted"
msgstr "Avslutad"

#: core/smartstatus.cpp:220
msgctxt "@item"
msgid "Interrupted"
msgstr "Avbruten"

#: core/smartstatus.cpp:223
msgctxt "@item"
msgid "Fatal error"
msgstr "Allvarligt fel"

#: core/smartstatus.cpp:226
msgctxt "@item"
msgid "Unknown error"
msgstr "Okänt fel"

#: core/smartstatus.cpp:229
msgctxt "@item"
msgid "Electrical error"
msgstr "Elektriskt fel"

#: core/smartstatus.cpp:232
msgctxt "@item"
msgid "Servo error"
msgstr "Servofel"

#: core/smartstatus.cpp:235
msgctxt "@item"
msgid "Read error"
msgstr "Läsfel"

#: core/smartstatus.cpp:238
msgctxt "@item"
msgid "Handling error"
msgstr "Hanteringsfel"

#: core/smartstatus.cpp:241
msgctxt "@item"
msgid "Self test in progress"
msgstr "Självtest pågår"

#: core/smartstatus.cpp:245
msgctxt "@item"
msgid "Success"
msgstr "Lyckades"

#: core/smartstatus.cpp:255
msgctxt "@item"
msgid "Healthy"
msgstr "Felfri"

#: core/smartstatus.cpp:258
msgctxt "@item"
msgid "Has been used outside of its design parameters in the past."
msgstr "Har tidigare används utanför sina designparametrar."

#: core/smartstatus.cpp:261
msgctxt "@item"
msgid "Has some bad sectors."
msgstr "Har några dåliga sektorer."

#: core/smartstatus.cpp:264
msgctxt "@item"
msgid "Is being used outside of its design parameters right now."
msgstr "Används utanför sina designparametrar just nu."

#: core/smartstatus.cpp:267
msgctxt "@item"
msgid "Has many bad sectors."
msgstr "Har många dåliga sektorer:"

#: core/smartstatus.cpp:271
msgctxt "@item"
msgid "Disk failure is imminent. Backup all data!"
msgstr "Diskfel inträffar snart. Säkerhetskopiera all data!"

#. i18n: file: gui/partitionmanagerui.rc:5
#. i18n: ectx: ToolBar (editToolBar)
#: rc.cpp:3
msgctxt "@title:menu turn on and off edit toolbar"
msgid "Edit Toolbar"
msgstr "Redigeringsverktygsrad"

#. i18n: file: gui/partitionmanagerui.rc:11
#. i18n: ectx: ToolBar (partitionToolBar)
#: rc.cpp:6
msgctxt "@title:menu"
msgid "Partition Toolbar"
msgstr "Partitionsverktygsrad"

#. i18n: file: gui/partitionmanagerui.rc:18
#. i18n: ectx: ToolBar (deviceToolBar)
#: rc.cpp:9
msgctxt "@title:menu"
msgid "Device Toolbar"
msgstr "Enhetsverktygsrad"

#. i18n: file: gui/partitionmanagerui.rc:30
#. i18n: ectx: Menu (view)
#: rc.cpp:12
msgctxt "@title:menu"
msgid "View"
msgstr "Visa"

#. i18n: file: gui/partitionmanagerui.rc:40
#. i18n: ectx: Menu (device)
#: rc.cpp:15
msgctxt "@title:menu"
msgid "Device"
msgstr "Enhet"

#. i18n: file: gui/partitionmanagerui.rc:42
#. i18n: ectx: Menu (selectedDevice)
#: rc.cpp:18
msgctxt "@title:menu"
msgid "Select Current Device"
msgstr "Välj aktuell enhet"

#. i18n: file: gui/partitionmanagerui.rc:54
#. i18n: ectx: Menu (partition)
#: rc.cpp:21
msgctxt "@title:menu"
msgid "Partition"
msgstr "Partition"

#. i18n: file: config/configurepageadvanced.ui:23
#. i18n: ectx: property (title), widget (QGroupBox, groupBox)
#: rc.cpp:24
msgid "Permissions"
msgstr "Skydd"

#. i18n: file: config/configurepageadvanced.ui:35
#. i18n: ectx: property (text), widget (QCheckBox, kcfg_allowApplyOperationsAsNonRoot)
#: rc.cpp:27
msgid "Allow applying operations without administrator privileges"
msgstr "Tillåt att åtgärder utförs utan administratörsrättigheter"

#. i18n: file: config/configurepageadvanced.ui:51
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_5)
#: rc.cpp:30
msgid "Backend"
msgstr "Bakgrundsprogram"

#. i18n: file: config/configurepageadvanced.ui:57
#. i18n: ectx: property (text), widget (QLabel, label_4)
#: rc.cpp:33
msgid "Active backend:"
msgstr "Aktivt bakgrundsprogram:"

#. i18n: file: config/configurepageadvanced.ui:79
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_6)
#: rc.cpp:36
msgid "Units"
msgstr "Enheter"

#. i18n: file: config/configurepageadvanced.ui:85
#. i18n: ectx: property (text), widget (QLabel, label_5)
#: rc.cpp:39
msgid "Preferred unit:"
msgstr "Föredragen enhet:"

#. i18n: file: config/configurepageadvanced.ui:96
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:42
msgid "Byte"
msgstr "Byte"

#. i18n: file: config/configurepageadvanced.ui:101
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:45
msgid "KiB"
msgstr "KiB"

#. i18n: file: config/configurepageadvanced.ui:106
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:48
msgid "MiB"
msgstr "MiB"

#. i18n: file: config/configurepageadvanced.ui:111
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:51
msgid "GiB"
msgstr "GiB"

#. i18n: file: config/configurepageadvanced.ui:116
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:54
msgid "TiB"
msgstr "TiB"

#. i18n: file: config/configurepageadvanced.ui:121
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:57
msgid "PiB"
msgstr "PiB"

#. i18n: file: config/configurepageadvanced.ui:126
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:60
msgid "EiB"
msgstr "EiB"

#. i18n: file: config/configurepagefilesystemcolors.ui:23
#. i18n: ectx: property (title), widget (QGroupBox, groupBox)
#. i18n: file: config/configurepagegeneral.ui:139
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_4)
#. i18n: file: config/configurepagefilesystemcolors.ui:23
#. i18n: ectx: property (title), widget (QGroupBox, groupBox)
#. i18n: file: config/configurepagegeneral.ui:139
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_4)
#: rc.cpp:63 rc.cpp:174
msgid "File Systems"
msgstr "Filsystem"

#. i18n: file: config/configurepagefilesystemcolors.ui:29
#. i18n: ectx: property (text), widget (QLabel, textLabel_20)
#: rc.cpp:66
msgid "luks:"
msgstr "luks:"

#. i18n: file: config/configurepagefilesystemcolors.ui:45
#. i18n: ectx: property (text), widget (QLabel, textLabel_9)
#: rc.cpp:69
msgid "ntfs:"
msgstr "ntfs:"

#. i18n: file: config/configurepagefilesystemcolors.ui:58
#. i18n: ectx: property (text), widget (QLabel, textLabel)
#: rc.cpp:72
msgid "ext2:"
msgstr "ext2:"

#. i18n: file: config/configurepagefilesystemcolors.ui:87
#. i18n: ectx: property (text), widget (QLabel, textLabel_2)
#: rc.cpp:75
msgid "ext3:"
msgstr "ext3:"

#. i18n: file: config/configurepagefilesystemcolors.ui:116
#. i18n: ectx: property (text), widget (QLabel, textLabel_3)
#: rc.cpp:78
msgid "ext4:"
msgstr "ext4:"

#. i18n: file: config/configurepagefilesystemcolors.ui:132
#. i18n: ectx: property (text), widget (QLabel, textLabel_21)
#: rc.cpp:81
msgid "btrfs:"
msgstr "btrfs:"

#. i18n: file: config/configurepagefilesystemcolors.ui:174
#. i18n: ectx: property (text), widget (QLabel, textLabel_4)
#: rc.cpp:84
msgid "linuxswap:"
msgstr "Linux växlingsminne:"

#. i18n: file: config/configurepagefilesystemcolors.ui:190
#. i18n: ectx: property (text), widget (QLabel, textLabel_6)
#: rc.cpp:87
msgid "fat16:"
msgstr "FAT16:"

#. i18n: file: config/configurepagefilesystemcolors.ui:219
#. i18n: ectx: property (text), widget (QLabel, textLabel_5)
#: rc.cpp:90
msgid "fat32:"
msgstr "FAT32:"

#. i18n: file: config/configurepagefilesystemcolors.ui:248
#. i18n: ectx: property (text), widget (QLabel, textLabel_25)
#: rc.cpp:93
msgid "zfs:"
msgstr "zfs:"

#. i18n: file: config/configurepagefilesystemcolors.ui:264
#. i18n: ectx: property (text), widget (QLabel, textLabel_7)
#: rc.cpp:96
msgid "reiserfs:"
msgstr "reiserfs:"

#. i18n: file: config/configurepagefilesystemcolors.ui:293
#. i18n: ectx: property (text), widget (QLabel, textLabel_8)
#: rc.cpp:99
msgid "reiser4:"
msgstr "reiser4:"

#. i18n: file: config/configurepagefilesystemcolors.ui:322
#. i18n: ectx: property (text), widget (QLabel, textLabel_10)
#: rc.cpp:102
msgid "hpfs:"
msgstr "hpfs:"

#. i18n: file: config/configurepagefilesystemcolors.ui:338
#. i18n: ectx: property (text), widget (QLabel, textLabel_11)
#: rc.cpp:105
msgid "jfs"
msgstr "jfs"

#. i18n: file: config/configurepagefilesystemcolors.ui:367
#. i18n: ectx: property (text), widget (QLabel, textLabel_12)
#: rc.cpp:108
msgid "hfs:"
msgstr "hfs:"

#. i18n: file: config/configurepagefilesystemcolors.ui:396
#. i18n: ectx: property (text), widget (QLabel, textLabel_14)
#: rc.cpp:111
msgid "hfsplus:"
msgstr "hfsplus:"

#. i18n: file: config/configurepagefilesystemcolors.ui:412
#. i18n: ectx: property (text), widget (QLabel, textLabel_15)
#: rc.cpp:114
msgid "ufs:"
msgstr "ufs:"

#. i18n: file: config/configurepagefilesystemcolors.ui:441
#. i18n: ectx: property (text), widget (QLabel, textLabel_22)
#: rc.cpp:117
msgid "xfs:"
msgstr "xfs:"

#. i18n: file: config/configurepagefilesystemcolors.ui:470
#. i18n: ectx: property (text), widget (QLabel, textLabel_24)
#: rc.cpp:120
msgid "ocfs2:"
msgstr "ocfs2:"

#. i18n: file: config/configurepagefilesystemcolors.ui:489
#. i18n: ectx: property (text), widget (QLabel, textLabel_13)
#: rc.cpp:123
msgid "extended:"
msgstr "utökat:"

#. i18n: file: config/configurepagefilesystemcolors.ui:518
#. i18n: ectx: property (text), widget (QLabel, textLabel_17)
#: rc.cpp:126
msgid "unformatted:"
msgstr "oformatterat:"

#. i18n: file: config/configurepagefilesystemcolors.ui:547
#. i18n: ectx: property (text), widget (QLabel, textLabel_16)
#: rc.cpp:129
msgid "unknown:"
msgstr "okänt:"

#. i18n: file: config/configurepagefilesystemcolors.ui:570
#. i18n: ectx: property (text), widget (QLabel, textLabel_26)
#: rc.cpp:132
msgid "exfat:"
msgstr "exfat:"

#. i18n: file: config/configurepagefilesystemcolors.ui:583
#. i18n: ectx: property (text), widget (QLabel, textLabel_27)
#: rc.cpp:135
msgid "nilfs2:"
msgstr "nilfs2:"

#. i18n: file: config/configurepagefilesystemcolors.ui:622
#. i18n: ectx: property (text), widget (QLabel, textLabel_28)
#: rc.cpp:138
msgid "lvm2 pv:"
msgstr "lvm2 pv:"

#. i18n: file: config/configurepagegeneral.ui:23
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
#: rc.cpp:141
msgid "Partition Alignment"
msgstr "Justering av partitionssektor"

#. i18n: file: config/configurepagegeneral.ui:29
#. i18n: ectx: property (text), widget (QCheckBox, kcfg_useCylinderAlignment)
#: rc.cpp:144
msgid "Use cylinder based alignment (Windows XP compatible)"
msgstr "Använd cylinderbaserad justering (kompatibelt med Windows XP)"

#. i18n: file: config/configurepagegeneral.ui:42
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:147
msgid "Sector alignment:"
msgstr "Sektorjustering:"

#. i18n: file: config/configurepagegeneral.ui:55
#. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_sectorAlignment)
#: rc.cpp:150
msgid " sectors"
msgstr " sektorer"

#. i18n: file: config/configurepagegeneral.ui:71
#. i18n: ectx: property (text), widget (QCheckBox, kcfg_alignDefault)
#: rc.cpp:153
msgid "Align partitions per default"
msgstr "Justera partitioner enligt förval"

#. i18n: file: config/configurepagegeneral.ui:90
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
#: rc.cpp:156
msgid "Logging"
msgstr "Loggning"

#. i18n: file: config/configurepagegeneral.ui:96
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: rc.cpp:159
msgid "Hide messages below:"
msgstr "Dölj meddelanden nedan:"

#. i18n: file: config/configurepagegeneral.ui:107
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_minLogLevel)
#: rc.cpp:162
msgid "Debug"
msgstr "Felsök"

#. i18n: file: config/configurepagegeneral.ui:112
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_minLogLevel)
#: rc.cpp:165
msgid "Information"
msgstr "Information"

#. i18n: file: config/configurepagegeneral.ui:117
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_minLogLevel)
#: rc.cpp:168
msgid "Warning"
msgstr "Varning"

#. i18n: file: config/configurepagegeneral.ui:122
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_minLogLevel)
#: rc.cpp:171
msgid "Error"
msgstr "Fel"

#. i18n: file: config/configurepagegeneral.ui:145
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: rc.cpp:177
msgid "Default file system:"
msgstr "Förvalt filsystem:"

#. i18n: file: config/configurepagegeneral.ui:167
#. i18n: ectx: property (title), widget (KButtonGroup, kcfg_shredSource)
#: rc.cpp:180
msgid "Shredding"
msgstr "Förstör"

#. i18n: file: config/configurepagegeneral.ui:173
#. i18n: ectx: property (text), widget (QLabel, label_5)
#: rc.cpp:183
msgid "Overwrite with:"
msgstr "Skriv över med:"

#. i18n: file: config/configurepagegeneral.ui:180
#. i18n: ectx: property (text), widget (QRadioButton, radioButton)
#: rc.cpp:186
msgid "Random data"
msgstr "Slumpmässig data"

#. i18n: file: config/configurepagegeneral.ui:187
#. i18n: ectx: property (text), widget (QRadioButton, radioButton_2)
#: rc.cpp:189
msgid "Zeros"
msgstr "Nollor"

#. i18n: file: gui/smartdialogwidgetbase.ui:23
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartStatus)
#. i18n: file: gui/devicepropswidgetbase.ui:265
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartStatus)
#. i18n: file: gui/smartdialogwidgetbase.ui:23
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartStatus)
#. i18n: file: gui/devicepropswidgetbase.ui:265
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartStatus)
#: rc.cpp:192 rc.cpp:288 gui/smartdialog.cpp:155 gui/smartdialog.cpp:157
msgid "SMART status:"
msgstr "SMART status:"

#. i18n: file: gui/smartdialogwidgetbase.ui:63
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartModelName)
#: rc.cpp:195 gui/smartdialog.cpp:163
msgid "Model:"
msgstr "Modell:"

#. i18n: file: gui/smartdialogwidgetbase.ui:92
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartSerialNumber)
#: rc.cpp:198 gui/smartdialog.cpp:164
msgid "Serial number:"
msgstr "Serienummer:"

#. i18n: file: gui/smartdialogwidgetbase.ui:121
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartFirmware)
#: rc.cpp:201 gui/smartdialog.cpp:165
msgid "Firmware revision:"
msgstr "Version av fast program:"

#. i18n: file: gui/smartdialogwidgetbase.ui:150
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartTemperature)
#: rc.cpp:204 gui/smartdialog.cpp:166
msgid "Temperature:"
msgstr "Temperatur:"

#. i18n: file: gui/smartdialogwidgetbase.ui:179
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartBadSectors)
#: rc.cpp:207 gui/smartdialog.cpp:167
msgid "Bad sectors:"
msgstr "Dåliga sektorer:"

#. i18n: file: gui/smartdialogwidgetbase.ui:208
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartPoweredOn)
#: rc.cpp:210 gui/smartdialog.cpp:168
msgid "Powered on for:"
msgstr "Igång under:"

#. i18n: file: gui/smartdialogwidgetbase.ui:237
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartPowerCycles)
#: rc.cpp:213 gui/smartdialog.cpp:169
msgid "Power cycles:"
msgstr "Antal kraftcykler:"

#. i18n: file: gui/smartdialogwidgetbase.ui:289
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:216
msgid "Id"
msgstr "Identifikation"

#. i18n: file: gui/smartdialogwidgetbase.ui:294
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:219
msgid "Attribute"
msgstr "Egenskap"

#. i18n: file: gui/smartdialogwidgetbase.ui:299
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:222
msgid "Failure Type"
msgstr "Feltyp"

#. i18n: file: gui/smartdialogwidgetbase.ui:304
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:225
msgid "Update Type"
msgstr "Uppdateringstyp"

#. i18n: file: gui/smartdialogwidgetbase.ui:309
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:228
msgid "Worst"
msgstr "Värsta"

#. i18n: file: gui/smartdialogwidgetbase.ui:314
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:231
msgid "Current"
msgstr "Nuvarande"

#. i18n: file: gui/smartdialogwidgetbase.ui:319
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:234
msgid "Threshold"
msgstr "Tröskel"

#. i18n: file: gui/smartdialogwidgetbase.ui:324
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:237
msgid "Raw"
msgstr "Obehandlad"

#. i18n: file: gui/smartdialogwidgetbase.ui:329
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:240
msgid "Assessment"
msgstr "Utvärdering"

#. i18n: file: gui/smartdialogwidgetbase.ui:334
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:243
msgid "Value"
msgstr "Värde"

#. i18n: file: gui/smartdialogwidgetbase.ui:385
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartOverallAssessment)
#: rc.cpp:246 gui/smartdialog.cpp:171
msgid "Overall assessment:"
msgstr "Övergripande utvärdering:"

#. i18n: file: gui/smartdialogwidgetbase.ui:414
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartSelfTests)
#: rc.cpp:249 gui/smartdialog.cpp:170
msgid "Self tests:"
msgstr "Självtester:"

#. i18n: file: gui/decryptluksdialogwidgetbase.ui:22
#. i18n: ectx: property (text), widget (QLabel, label_Name)
#: rc.cpp:252
msgid "&Name:"
msgstr "&Namn:"

#. i18n: file: gui/decryptluksdialogwidgetbase.ui:35
#. i18n: ectx: property (text), widget (QLabel, label_Pass)
#: rc.cpp:255
msgid "&Passphrase:"
msgstr "&Lösenordsfras:"

#. i18n: file: gui/devicepropswidgetbase.ui:58
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextType)
#: rc.cpp:258
msgid "Partition table:"
msgstr "Partitionstabell:"

#. i18n: file: gui/devicepropswidgetbase.ui:77
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioCylinderBased)
#: rc.cpp:261
msgid "Cylinder alignment"
msgstr "Cylinderjustering"

#. i18n: file: gui/devicepropswidgetbase.ui:84
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioSectorBased)
#: rc.cpp:264
msgid "Sector based alignment"
msgstr "Sektorbaserad justering"

#. i18n: file: gui/devicepropswidgetbase.ui:113
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextCapacity)
#: rc.cpp:267
msgid "Capacity:"
msgstr "Kapacitet:"

#. i18n: file: gui/devicepropswidgetbase.ui:130
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextTotalSectors)
#: rc.cpp:270
msgid "Total sectors:"
msgstr "Totalt antal sektorer:"

#. i18n: file: gui/devicepropswidgetbase.ui:160
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextCHS)
#: rc.cpp:273
msgid "Cylinders/Heads/Sectors:"
msgstr "Cylindrar/huvuden/sektorer:"

#. i18n: file: gui/devicepropswidgetbase.ui:183
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLogicalSectorSize)
#: rc.cpp:276
msgid "Logical sector size:"
msgstr "Logisk sektorstorlek:"

#. i18n: file: gui/devicepropswidgetbase.ui:200
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextPhysicalSectorSize)
#: rc.cpp:279
msgid "Physical sector size:"
msgstr "Fysisk sektorstorlek:"

#. i18n: file: gui/devicepropswidgetbase.ui:217
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextCylinderSize)
#: rc.cpp:282
msgid "Cylinder size:"
msgstr "Cylinderstorlek:"

#. i18n: file: gui/devicepropswidgetbase.ui:241
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextPrimariesMax)
#: rc.cpp:285
msgid "Primaries/Max:"
msgstr "Primära/Max:"

#. i18n: file: gui/devicepropswidgetbase.ui:303
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonSmartMore)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:142
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonMore)
#. i18n: file: gui/devicepropswidgetbase.ui:303
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonSmartMore)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:142
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonMore)
#: rc.cpp:291 rc.cpp:553
msgid "More..."
msgstr "Mer..."

#. i18n: file: gui/mainwindowbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QMainWindow, MainWindowBase)
#. i18n: file: gui/partitionmanagerwidgetbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QWidget, PartitionManagerWidgetBase)
#. i18n: file: gui/mainwindowbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QMainWindow, MainWindowBase)
#. i18n: file: gui/partitionmanagerwidgetbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QWidget, PartitionManagerWidgetBase)
#: rc.cpp:294 rc.cpp:321
msgctxt "@title:window"
msgid "KDE Partition Manager"
msgstr "KDE:s partitionshanterare"

#. i18n: file: gui/mainwindowbase.ui:24
#. i18n: ectx: property (windowTitle), widget (QDockWidget, m_DockDevices)
#: rc.cpp:297
msgctxt "@title:window"
msgid "Devices"
msgstr "Enheter"

#. i18n: file: gui/mainwindowbase.ui:38
#. i18n: ectx: property (windowTitle), widget (QDockWidget, m_DockOperations)
#: rc.cpp:300
msgctxt "@title:window"
msgid "Pending Operations"
msgstr "Väntande åtgärder"

#. i18n: file: gui/mainwindowbase.ui:49
#. i18n: ectx: property (windowTitle), widget (QDockWidget, m_DockInformation)
#: rc.cpp:303 gui/infopane.cpp:53
msgctxt "@title:window"
msgid "Information"
msgstr "Information"

#. i18n: file: gui/mainwindowbase.ui:63
#. i18n: ectx: property (windowTitle), widget (QDockWidget, m_DockLog)
#: rc.cpp:306
msgctxt "@title:window"
msgid "Log Output"
msgstr "Logga utmatning"

#. i18n: file: gui/treelogbase.ui:54
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeLog)
#: rc.cpp:309
msgctxt ""
"@title:column Severity of a log entry / log level. Text must be very short."
msgid "Sev."
msgstr "Allvarlighet"

#. i18n: file: gui/treelogbase.ui:57
#. i18n: ectx: property (toolTip), widget (QTreeWidget, m_TreeLog)
#: rc.cpp:312
msgid "Severity"
msgstr "Allvarlighet"

#. i18n: file: gui/treelogbase.ui:62
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeLog)
#: rc.cpp:315
msgctxt "@title:column a time stamp of a log entry"
msgid "Time"
msgstr "Tid"

#. i18n: file: gui/treelogbase.ui:67
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeLog)
#: rc.cpp:318
msgctxt "@title:column the text message of a log entry"
msgid "Message"
msgstr "Meddelande"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:70
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:324
msgid "Partition"
msgstr "Partition"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:75
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:327
msgid "Type"
msgstr "Typ"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:80
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:330
msgid "Mount Point"
msgstr "Monteringsplats"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:85
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:302
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioLabel)
#. i18n: file: gui/partitionmanagerwidgetbase.ui:85
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:302
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioLabel)
#: rc.cpp:333 rc.cpp:568
msgid "Label"
msgstr "Etikett"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:90
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:295
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioUUID)
#. i18n: file: gui/partitionmanagerwidgetbase.ui:90
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:295
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioUUID)
#: rc.cpp:336 rc.cpp:565
msgid "UUID"
msgstr "UUID"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:95
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:339
msgid "Size"
msgstr "Storlek"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:100
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:342
msgid "Used"
msgstr "Använt"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:105
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:345
msgid "Available"
msgstr "Tillgängligt:"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:110
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:348
msgid "First Sector"
msgstr "Första sektor"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:351
msgid "Last Sector"
msgstr "Sista sektor"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:120
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:354
msgid "Number of Sectors"
msgstr "Antal sektorer"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:125
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:357
msgid "Flags"
msgstr "Flaggor"

#. i18n: file: gui/partpropswidgetbase.ui:49
#. i18n: ectx: property (text), widget (QLabel, m_LabelFileSystem)
#. i18n: file: gui/sizedialogwidgetbase.ui:99
#. i18n: ectx: property (text), widget (QLabel, m_LabelFileSystem)
#. i18n: file: gui/partpropswidgetbase.ui:49
#. i18n: ectx: property (text), widget (QLabel, m_LabelFileSystem)
#. i18n: file: gui/sizedialogwidgetbase.ui:99
#. i18n: ectx: property (text), widget (QLabel, m_LabelFileSystem)
#: rc.cpp:360 rc.cpp:493
msgctxt "@label:listbox"
msgid "File system:"
msgstr "Filsystem:"

#. i18n: file: gui/partpropswidgetbase.ui:65
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLabel)
#. i18n: file: gui/sizedialogwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLabel)
#. i18n: file: gui/partpropswidgetbase.ui:65
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLabel)
#. i18n: file: gui/sizedialogwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLabel)
#: rc.cpp:363 rc.cpp:496
msgctxt "@label"
msgid "Label:"
msgstr "Etikett:"

#. i18n: file: gui/partpropswidgetbase.ui:82
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNoSetLabel)
#. i18n: file: gui/sizedialogwidgetbase.ui:134
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNoSetLabel)
#. i18n: file: gui/partpropswidgetbase.ui:82
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNoSetLabel)
#. i18n: file: gui/sizedialogwidgetbase.ui:134
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNoSetLabel)
#: rc.cpp:366 rc.cpp:499
msgctxt "@label"
msgid "This file system does not support setting a label."
msgstr "Filsystemet stöder inte att ange en etikett."

#. i18n: file: gui/partpropswidgetbase.ui:92
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckRecreate)
#: rc.cpp:369
msgctxt "@action:button"
msgid "Recreate existing file system"
msgstr "Återskapa befintligt filsystem"

#. i18n: file: gui/partpropswidgetbase.ui:106
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextMountPoint)
#: rc.cpp:372
msgctxt "@label"
msgid "Mount point:"
msgstr "Monteringsplats:"

#. i18n: file: gui/partpropswidgetbase.ui:123
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextRole)
#: rc.cpp:375
msgctxt "@label"
msgid "Partition type:"
msgstr "Typ av partition:"

#. i18n: file: gui/partpropswidgetbase.ui:140
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextStatus)
#: rc.cpp:378
msgctxt "@label"
msgid "Status:"
msgstr "Status:"

#. i18n: file: gui/partpropswidgetbase.ui:157
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextUuid)
#: rc.cpp:381
msgctxt "@label"
msgid "UUID:"
msgstr "UUID:"

#. i18n: file: gui/partpropswidgetbase.ui:187
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextCapacity)
#: rc.cpp:384
msgctxt "@label"
msgid "Size:"
msgstr "Storlek:"

#. i18n: file: gui/partpropswidgetbase.ui:210
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextAvailable)
#: rc.cpp:387
msgctxt "@label partition capacity available"
msgid "Available:"
msgstr "Tillgängligt:"

#. i18n: file: gui/partpropswidgetbase.ui:227
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextUsed)
#: rc.cpp:390
msgctxt "@label partition capacity used"
msgid "Used:"
msgstr "Använt:"

#. i18n: file: gui/partpropswidgetbase.ui:251
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextFirstSector)
#: rc.cpp:393
msgctxt "@label"
msgid "First sector:"
msgstr "Första sektor:"

#. i18n: file: gui/partpropswidgetbase.ui:268
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLastSector)
#: rc.cpp:396
msgctxt "@label"
msgid "Last sector:"
msgstr "Sista sektor:"

#. i18n: file: gui/partpropswidgetbase.ui:285
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNumSectors)
#: rc.cpp:399
msgctxt "@label"
msgid "Number of sectors:"
msgstr "Antal sektorer:"

#. i18n: file: gui/partpropswidgetbase.ui:309
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextFlags)
#: rc.cpp:402
msgctxt "@label"
msgid "Flags:"
msgstr "Flaggor:"

#. i18n: file: gui/applyprogressdetailswidgetbase.ui:37
#. i18n: ectx: property (text), widget (QPushButton, m_ButtonSave)
#: rc.cpp:405
msgid "Save"
msgstr "Spara"

#. i18n: file: gui/applyprogressdetailswidgetbase.ui:44
#. i18n: ectx: property (text), widget (QPushButton, m_ButtonBrowser)
#: rc.cpp:408
msgid "Open in External Browser"
msgstr "Öppna i extern webbläsare"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:18
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:411
msgid ""
"This table shows which file systems are supported and which specific "
"operations can be performed on them.\n"
"Some file systems need external tools to be installed for them to be "
"supported. But not all operations can be performed on all file systems, even "
"if all required tools are installed. Please see the documentation for "
"details. "
msgstr ""
"Den här tabellen visar vilka filsystem som stöds, och vilka specifika "
"åtgärder som kan utföras med dem.\n"
"Vissa filsystem kräver att externa verktyg är installerade för att de ska "
"stödas. Men alla åtgärder kan inte utföras med alla filsystem, även om alla "
"verktyg som krävs är installerade. Se dokumentationen för detaljinformation."

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:65
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:415
msgid "File System"
msgstr "Filsystem"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:70
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:418
msgid "Create"
msgstr "Skapa"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:75
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:421
msgid "Grow"
msgstr "Utöka"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:80
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:424
msgid "Shrink"
msgstr "Krymp"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:85
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:427
msgid "Move"
msgstr "Flytta"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:90
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:430
msgid "Copy"
msgstr "Kopiera"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:95
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:433
msgid "Check"
msgstr "Kontrollera"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:100
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:436
msgid "Read Label"
msgstr "Läs etikett"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:105
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:439
msgid "Write Label"
msgstr "Skriv etikett"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:110
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:442
msgid "Read Usage"
msgstr "Läs användning"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:445
msgid "Backup"
msgstr "Säkerhetskopiera"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:120
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:448
msgid "Restore"
msgstr "Återställ"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:125
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:451
msgid "Support Tools"
msgstr "Stödverktyg"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:135
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonRescan)
#: rc.cpp:454
msgctxt "@action:button"
msgid "Rescan Support"
msgstr "Stöd för återavsökning"

#. i18n: file: gui/sizedetailswidgetbase.ui:62
#. i18n: ectx: property (text), widget (QLabel, label_6)
#: rc.cpp:457
msgctxt "@label:listbox"
msgid "First sector:"
msgstr "Första sektor:"

#. i18n: file: gui/sizedetailswidgetbase.ui:97
#. i18n: ectx: property (text), widget (QLabel, label_7)
#: rc.cpp:460
msgctxt "@label:listbox"
msgid "Last sector:"
msgstr "Sista sektor:"

#. i18n: file: gui/sizedetailswidgetbase.ui:120
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckAlign)
#: rc.cpp:463
msgid "Align partition"
msgstr "Justera partition"

#. i18n: file: gui/createpartitiontablewidgetbase.ui:20
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:466
msgid "Choose the type of partition table you want to create:"
msgstr "Välj typ av partitionstabell du vill skapa:"

#. i18n: file: gui/createpartitiontablewidgetbase.ui:29
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioGPT)
#: rc.cpp:469
msgid "GPT"
msgstr "GPT"

#. i18n: file: gui/createpartitiontablewidgetbase.ui:39
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioMSDOS)
#: rc.cpp:472
msgid "MS-Dos"
msgstr "MSDOS"

#. i18n: file: gui/createpartitiontablewidgetbase.ui:66
#. i18n: ectx: property (text), widget (QLabel, m_IconLabel)
#: rc.cpp:475
msgid "(icon)"
msgstr "(Ikon)"

#. i18n: file: gui/createpartitiontablewidgetbase.ui:79
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: rc.cpp:478
msgid "<b>Warning:</b> This will destroy all data on the device!"
msgstr "<b>Varning:</b> Det här förstör all data på enheten."

#. i18n: file: gui/sizedialogwidgetbase.ui:55
#. i18n: ectx: property (text), widget (QLabel, m_LabelRole)
#: rc.cpp:481
msgctxt "@label:listbox"
msgid "Partition type:"
msgstr "Typ av partition:"

#. i18n: file: gui/sizedialogwidgetbase.ui:70
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioPrimary)
#: rc.cpp:484
msgid "Primary"
msgstr "Primär"

#. i18n: file: gui/sizedialogwidgetbase.ui:77
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioExtended)
#: rc.cpp:487
msgid "Extended"
msgstr "Utökad"

#. i18n: file: gui/sizedialogwidgetbase.ui:84
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioLogical)
#: rc.cpp:490
msgid "Logical"
msgstr "Logisk"

#. i18n: file: gui/sizedialogwidgetbase.ui:152
#. i18n: ectx: property (text), widget (QLabel, label_4)
#: rc.cpp:502
msgctxt "@label"
msgid "Minimum size:"
msgstr "Minimal storlek:"

#. i18n: file: gui/sizedialogwidgetbase.ui:175
#. i18n: ectx: property (text), widget (QLabel, label_5)
#: rc.cpp:505
msgctxt "@label"
msgid "Maximum size:"
msgstr "Maximal storlek:"

#. i18n: file: gui/sizedialogwidgetbase.ui:198
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:508
msgctxt "@label:listbox"
msgid "Free space before:"
msgstr "Ledigt utrymme innan:"

#. i18n: file: gui/sizedialogwidgetbase.ui:233
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: rc.cpp:511
msgctxt "@label:listbox"
msgid "Size:"
msgstr "Storlek:"

#. i18n: file: gui/sizedialogwidgetbase.ui:262
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: rc.cpp:514
msgctxt "@label:listbox"
msgid "Free space after:"
msgstr "Ledigt utrymme efter:"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:17
#. i18n: ectx: property (text), widget (QLabel, m_LabelPath)
#: rc.cpp:517
msgid "Path:"
msgstr "Sökväg:"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:46
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonSelect)
#: rc.cpp:520
msgid "Select..."
msgstr "Markera..."

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:53
#. i18n: ectx: property (text), widget (QLabel, m_LabelType)
#: rc.cpp:523
msgid "Type:"
msgstr "Typ:"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:63
#. i18n: ectx: property (text), widget (QLabel, m_LabelOptions)
#: rc.cpp:526
msgid "Options:"
msgstr "Alternativ:"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:73
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckReadOnly)
#: rc.cpp:529
msgid "Read-only"
msgstr "Skrivskyddad"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:80
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckUsers)
#: rc.cpp:532
msgid "Users can mount and unmount"
msgstr "Användare kan montera och avmontera"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:87
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckNoAuto)
#: rc.cpp:535
msgid "No automatic mount"
msgstr "Ingen automatisk montering"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:94
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckNoAtime)
#: rc.cpp:538
msgid "No update of file access times"
msgstr "Ingen uppdatering av filåtkomsttider"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:101
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckSync)
#: rc.cpp:541
msgid "Synchronous access"
msgstr "Synkron åtkomst"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:108
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckNoDirAtime)
#: rc.cpp:544
msgid "No update of directory access times"
msgstr "Ingen uppdatering av katalogåtkomsttider"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckNoExec)
#: rc.cpp:547
msgid "No binary execution"
msgstr "Ingen körning av binärprogram"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:122
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckRelAtime)
#: rc.cpp:550
msgid "Update access times relative to modification"
msgstr "Uppdatera åtkomsttider i förhållande till ändring"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:149
#. i18n: ectx: property (text), widget (QLabel, m_LabelDumpFreq)
#: rc.cpp:556
msgid "Dump Frequency:"
msgstr "Dumpningsfrekvens:"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:178
#. i18n: ectx: property (text), widget (QLabel, m_LabelPassNumber)
#: rc.cpp:559
msgid "Pass Number:"
msgstr "Genomgångsnummer:"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:285
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioDeviceNode)
#: rc.cpp:562
msgid "Device Node"
msgstr "Enhetsnod"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:309
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:571
msgid "Identify by:"
msgstr "Identifiera med:"

#. i18n: file: gui/editmountoptionsdialogwidgetbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QWidget, EditMountOptionsDialogWidgetBase)
#: rc.cpp:574
msgid "Edit Mount Options"
msgstr "Redigera monteringsinställningar"

#. i18n: file: gui/editmountoptionsdialogwidgetbase.ui:20
#. i18n: ectx: property (text), widget (QLabel, m_Label)
#: rc.cpp:577
msgid "Edit the mount options for this file system:"
msgstr "Redigera monteringsinställningarna för filsystemet:"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:33
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeTasks)
#: rc.cpp:580
msgid "Operations and Jobs"
msgstr "Åtgärder och jobb"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:38
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeTasks)
#: rc.cpp:583
msgid "Time Elapsed"
msgstr "Förfluten tid"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:64
#. i18n: ectx: property (text), widget (QLabel, m_LabelTime)
#: rc.cpp:586
msgid "Total Time: 00:00:00"
msgstr "Total tid: 00:00:00"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:81
#. i18n: ectx: property (format), widget (QProgressBar, m_ProgressSub)
#: rc.cpp:590
#, no-c-format
msgid "Operation: %p%"
msgstr "Åtgärd: %p %"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:91
#. i18n: ectx: property (text), widget (QLabel, m_LabelStatus)
#: rc.cpp:593
msgid "Status"
msgstr "Status"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:107
#. i18n: ectx: property (format), widget (QProgressBar, m_ProgressTotal)
#: rc.cpp:597
#, no-c-format
msgid "Total: %p%"
msgstr "Totalt: %p %"

#. i18n: file: config.kcfg:38
#. i18n: ectx: label, entry (firstRun), group (KDE Partition Manager)
#: rc.cpp:600
msgctxt "@label"
msgid "Is this the first time KDE Partition Manager is being run?"
msgstr "Är det här första gången som KDE:s partitionshanterare körs?"

#. i18n: file: config.kcfg:42
#. i18n: ectx: label, entry (minLogLevel), group (KDE Partition Manager)
#: rc.cpp:603
msgctxt "@label"
msgid "Hide log messages below"
msgstr "Dölj loggmeddelanden nedan"

#. i18n: file: config.kcfg:46
#. i18n: ectx: label, entry (sectorAlignment), group (KDE Partition Manager)
#: rc.cpp:606
msgctxt "@label"
msgid "Partition sector alignment"
msgstr "Justering av partitionssektor:"

#. i18n: file: config.kcfg:50
#. i18n: ectx: label, entry (useCylinderAlignment), group (KDE Partition Manager)
#: rc.cpp:609
msgctxt "@label"
msgid "Use cylinder based alignment (Windows XP compatible)"
msgstr "Använd cylinderbaserad justering (kompatibelt med Windows XP)"

#. i18n: file: config.kcfg:54
#. i18n: ectx: label, entry (alignDefault), group (KDE Partition Manager)
#: rc.cpp:612
msgctxt "@label"
msgid "Align partitions per default"
msgstr "Justera partition enligt förval"

#. i18n: file: config.kcfg:58
#. i18n: ectx: label, entry (allowApplyOperationsAsNonRoot), group (KDE Partition Manager)
#: rc.cpp:615
msgctxt "@label"
msgid "Allow applying operations without administrator privileges"
msgstr "Tillåt att åtgärder utförs utan administratörsrättigheter"

#. i18n: file: config.kcfg:62
#. i18n: ectx: label, entry, group (KDE Partition Manager)
#: rc.cpp:618
msgctxt "@label"
msgid "File system colors"
msgstr "Filsystemfärger"

#. i18n: file: config.kcfg:92
#. i18n: ectx: label, entry, group (KDE Partition Manager)
#: rc.cpp:621
msgctxt "@label"
msgid "Show the application's menu bar"
msgstr "Visa programmets menyrad"

#. i18n: file: config.kcfg:96
#. i18n: ectx: label, entry, group (KDE Partition Manager)
#: rc.cpp:624
msgctxt "@label"
msgid "Backend plugin"
msgstr "Bakgrundsprogram"

#. i18n: file: config.kcfg:103
#. i18n: ectx: label, entry, group (KDE Partition Manager)
#: rc.cpp:627
msgctxt "@label"
msgid "Preferred unit:"
msgstr "Föredragen enhet:"

#: plugins/dummy/dummybackend.cpp:47
msgctxt "@title"
msgid "Dummy Backend Plugin"
msgstr "Testbakgrundsprogram"

#: plugins/dummy/dummybackend.cpp:49
msgid "KDE Partition Manager dummy backend."
msgstr "KDE:s partitionshanterares testbakgrundsprogram"

#: plugins/dummy/dummybackend.cpp:51
msgid "Copyright 2010 Volker Lanz"
msgstr "Copyright 2010 Volker Lanz"

#: plugins/dummy/dummybackend.cpp:53 plugins/libparted/libpartedbackend.cpp:74
#: util/helpers.cpp:130
msgctxt "@info:credit"
msgid "Volker Lanz"
msgstr "Volker Lanz"

#: plugins/libparted/libparteddevice.cpp:100
msgctxt "@info/plain"
msgid ""
"Creating partition table failed: Could not retrieve partition table type "
"\"%1\" for <filename>%2</filename>."
msgstr ""
"Misslyckades skapa partitionstabell: Kunde inte hämta partitionstabelltypen "
"\"%1\" för <filename>%2</filename>."

#: plugins/libparted/libparteddevice.cpp:108
msgctxt "@info/plain"
msgid ""
"Creating partition table failed: Could not open backend device <filename>%1</"
"filename>."
msgstr ""
"Misslyckades skapa partitionstabell: Kunde inte bakgrundsenhet <filename>%1</"
"filename>."

#: plugins/libparted/libparteddevice.cpp:116
msgctxt "@info/plain"
msgid ""
"Creating partition table failed: Could not create a new partition table in "
"the backend for device <filename>%1</filename>."
msgstr ""
"Misslyckades skapa partitionstabell: Kunde inte skapa en ny partitionstabell "
"i bakgrundsprogrammet för enheten <filename>%1</filename>."

#: plugins/libparted/libpartedbackend.cpp:68
msgctxt "@title"
msgid "LibParted Backend Plugin"
msgstr "LibParted bakgrundsprogram"

#: plugins/libparted/libpartedbackend.cpp:70
msgid "KDE Partition Manager backend for libparted."
msgstr "KDE:s partitionshanterares bakgrundsprogram för LibParted"

#: plugins/libparted/libpartedbackend.cpp:72
msgid "Copyright 2008,2009,2010 Volker Lanz"
msgstr "Copyright 2008,2009,2010 Volker Lanz"

#: plugins/libparted/libpartedbackend.cpp:107
msgctxt "@info/plain"
msgid "LibParted Exception: %1"
msgstr "Undantag i Libparted: %1"

#: plugins/libparted/libpartedbackend.cpp:422
msgctxt "@info/plain"
msgid "Could not access device <filename>%1</filename>"
msgstr "Kunde inte komma åt enheten <filename>%1</filename>"

#: plugins/libparted/libpartedbackend.cpp:426
msgctxt "@info/plain"
msgid "Device found: %1"
msgstr "Enhet hittades: %1"

#: plugins/libparted/libpartedpartitiontable.cpp:167
msgctxt "@info/plain"
msgid ""
"Unknown partition role for new partition <filename>%1</filename> (roles: %2)"
msgstr ""
"Okänd partitionsroll för ny partition <filename>%1</filename> (roller: %2)"

#: plugins/libparted/libpartedpartitiontable.cpp:177
msgctxt "@info/plain"
msgid "Failed to create new partition <filename>%1</filename>."
msgstr "Misslyckades skapa ny partition <filename>%1</filename>"

#: plugins/libparted/libpartedpartitiontable.cpp:189
msgctxt "@info/plain"
msgid ""
"Failed to create a new partition: could not get geometry for constraint."
msgstr ""
"Misslyckades skapa ny partition: kunde inte hämta geometri för begränsning."

#: plugins/libparted/libpartedpartitiontable.cpp:221
msgctxt "@info/plain"
msgid ""
"Deleting partition failed: Partition to delete (<filename>%1</filename>) not "
"found on disk."
msgstr ""
"Misslyckades ta bort partition: Partition att ta bort (<filename>%1</"
"filename>) hittades inte på disken."

#: plugins/libparted/libpartedpartitiontable.cpp:245
msgctxt "@info/plain"
msgid ""
"Could not set geometry for partition <filename>%1</filename> while trying to "
"resize/move it."
msgstr ""
"Kunde inte ställa in geometrin för partitionen <filename>%1</filename> vid "
"försök att ändra storlek eller flytta den."

#: plugins/libparted/libpartedpartitiontable.cpp:248
msgctxt "@info/plain"
msgid ""
"Could not get constraint for partition <filename>%1</filename> while trying "
"to resize/move it."
msgstr ""
"Kunde inte hämta begränsning för partitionen <filename>%1</filename> vid "
"försök att ändra storlek eller flytta den."

#: plugins/libparted/libpartedpartitiontable.cpp:251
msgctxt "@info/plain"
msgid ""
"Could not get geometry for partition <filename>%1</filename> while trying to "
"resize/move it."
msgstr ""
"Kunde inte hämta geometri för partitionen <filename>%1</filename> vid försök "
"att ändra storlek eller flytta den."

#: plugins/libparted/libpartedpartitiontable.cpp:254
msgctxt "@info/plain"
msgid ""
"Could not open partition <filename>%1</filename> while trying to resize/move "
"it."
msgstr ""
"Kunde inte öppna partitionen <filename>%1</filename> vid försök att ändra "
"storlek eller flytta den."

#: plugins/libparted/libpartedpartitiontable.cpp:273
msgctxt "@info/plain"
msgid ""
"Failed to erase filesystem signature on partition <filename>%1</filename>."
msgstr ""
"Misslyckades radera filsystemsignatur på partition <filename>%1</filename>."

#: plugins/libparted/libpartedpartitiontable.cpp:282
msgctxt "@info/plain"
msgid ""
"Could not delete file system on partition <filename>%1</filename>: Failed to "
"get partition."
msgstr ""
"Kunde inte ta bort filsystemet på partitionen <filename>%1</filename>: "
"Misslyckades hämta partitionen."

#: plugins/libparted/libpartedpartitiontable.cpp:310
msgctxt "@info/plain"
msgid "Could not resize file system on partition <filename>%1</filename>."
msgstr ""
"Kunde inte ändra filsystemets storlek på partitionen <filename>%1</filename>."

#: plugins/libparted/libpartedpartitiontable.cpp:313
msgctxt "@info/plain"
msgid ""
"Could not get geometry for resized partition <filename>%1</filename> while "
"trying to resize the file system."
msgstr ""
"Kunde inte hämta geometrin för den storleksändrade partitionen <filename>%1</"
"filename> vid försök att ändra storlek på filsystemet."

#: plugins/libparted/libpartedpartitiontable.cpp:340
msgctxt "@info/plain"
msgid ""
"Could not determine file system of partition at sector %1 on device "
"<filename>%2</filename>."
msgstr ""
"Kunde inte bestämma filsystemet för partitionen på sektor %1 av enheten "
"<filename>%2</filename>."

#: plugins/libparted/libpartedpartitiontable.cpp:353
msgctxt "@info/plain"
msgid "Could not update the system type for partition <filename>%1</filename>."
msgstr ""
"Kunde inte uppdatera systemtyp för partitionen <filename>%1</filename>."

#: plugins/libparted/libpartedpartition.cpp:43
msgctxt "@info/plain"
msgid "The flag \"%1\" is not available on the partition's partition table."
msgstr "Flaggan \"%1\" är inte tillgänglig i partitionens partitionstabell."

#: config/configureoptionsdialog.cpp:54
msgctxt "@title:tab general application settings"
msgid "General"
msgstr "Allmänt"

#: config/configureoptionsdialog.cpp:54 config/configureoptionsdialog.cpp:101
msgid "General Settings"
msgstr "Allmänna inställningar"

#: config/configureoptionsdialog.cpp:59
msgctxt "@title:tab"
msgid "File System Colors"
msgstr "Filsystemfärger"

#: config/configureoptionsdialog.cpp:59
msgid "File System Color Settings"
msgstr "Inställningar av filsystemfärger"

#: config/configureoptionsdialog.cpp:64
msgctxt "@title:tab advanced application settings"
msgid "Advanced"
msgstr "Avancerat"

#: config/configureoptionsdialog.cpp:64
msgid "Advanced Settings"
msgstr "Avancerade inställningar"

#: config/configureoptionsdialog.cpp:151
msgctxt "@info"
msgid ""
"<para>Do you really want to change the backend?</para><para><warning>This "
"will also rescan devices and thus clear the list of pending operations.</"
"warning></para>"
msgstr ""
"<para>Vill du verkligen ändra bakgrundsprogram?</para><para><warning>Det "
"söker också om enheterna och tömmer därför listan med väntande åtgärder.</"
"warning></para>"

#: config/configureoptionsdialog.cpp:153
msgctxt "@title:window"
msgid "Really Change Backend?"
msgstr "Verkligen ändra bakgrundsprogram?"

#: config/configureoptionsdialog.cpp:154
msgctxt "@action:button"
msgid "Change the Backend"
msgstr "Ändra bakgrundsprogram"

#: config/configureoptionsdialog.cpp:155
msgctxt "@action:button"
msgid "Do Not Change the Backend"
msgstr "Ändra inte bakgrundsprogram"

#: gui/editmountpointdialogwidget.cpp:181
msgctxt "@info"
msgid "Could not open mount point file <filename>%1</filename>."
msgstr "Kunde inte öppna monteringsplatsfilen <filename>%1</filename>."

#: gui/editmountpointdialogwidget.cpp:182
msgctxt "@title:window"
msgid "Error while reading mount points"
msgstr "Fel vid läsning av monteringsplatser"

#: gui/editmountpointdialogwidget.cpp:301
msgctxt "@info"
msgid "Could not save mount points to file <filename>%1</filename>."
msgstr "Kunde inte spara monteringsplatser i filen <filename>%1</filename>."

#: gui/editmountpointdialogwidget.cpp:302
msgctxt "@title:window"
msgid "Error While Saving Mount Points"
msgstr "Fel när monteringsplatser skulle sparas"

#: gui/createpartitiontabledialog.cpp:37
msgctxt "@title:window"
msgid "Create a New Partition Table on <filename>%1</filename>"
msgstr "Skapa en ny partitionstabell på <filename>%1</filename>"

#: gui/createpartitiontabledialog.cpp:38
msgctxt "@action:button"
msgid "&Create New Partition Table"
msgstr "S&kapa ny partitionstabell"

#: gui/createpartitiontabledialog.cpp:60
msgctxt "@info"
msgid ""
"<para>Do you really want to create an MS-Dos partition table on <filename>"
"%1</filename>?</para><para>This device has more than 2^32 sectors. That is "
"the most the MS-Dos partition table type supports, so you will not be able "
"to use the whole device.</para>"
msgstr ""
"<para>Vill du verkligen skapa en MS-DOS partitionstabell på <filename>%1</"
"filename>?</para><para>Enheten har mer än 2^32 sektorer. Det är det mesta MS-"
"DOS partitionstabellen stöder, så du kommer inte att kunna använda hela "
"enheten.</para>"

#: gui/createpartitiontabledialog.cpp:62
msgctxt "@title:window"
msgid "Really Create MS-Dos Partition Table Type?"
msgstr "Verkligen skapa MS-DOS partitionstabelltyp?"

#: gui/createpartitiontabledialog.cpp:63
msgctxt "@action:button"
msgid "Create MS-Dos Type"
msgstr "Skapa MS-DOS typ"

#: gui/smartdialog.cpp:64
msgctxt "@title:window"
msgid "SMART Properties: <filename>%1</filename>"
msgstr "SMART-egenskaper: <filename>%1</filename>"

#: gui/smartdialog.cpp:66
msgctxt "@action:button"
msgid "Save SMART Report"
msgstr "Spara SMART-rapport"

#: gui/smartdialog.cpp:88 gui/smartdialog.cpp:155
#: gui/devicepropsdialog.cpp:118
msgctxt "@label SMART disk status"
msgid "good"
msgstr "bra"

#: gui/smartdialog.cpp:93 gui/smartdialog.cpp:157
#: gui/devicepropsdialog.cpp:123
msgctxt "@label SMART disk status"
msgid "BAD"
msgstr "DÅLIG"

#: gui/smartdialog.cpp:104 gui/smartdialog.cpp:161
msgctxt "@label SMART number of bad sectors"
msgid "none"
msgstr "inga"

#: gui/smartdialog.cpp:124 gui/smartdialog.cpp:191
msgctxt "@item:intable"
msgid "Pre-Failure"
msgstr "Fel från början"

#: gui/smartdialog.cpp:124 gui/smartdialog.cpp:191
msgctxt "@item:intable"
msgid "Old-Age"
msgstr "Hög ålder"

#: gui/smartdialog.cpp:125 gui/smartdialog.cpp:192
msgctxt "@item:intable"
msgid "Online"
msgstr "Uppkopplad"

#: gui/smartdialog.cpp:125 gui/smartdialog.cpp:192
msgctxt "@item:intable"
msgid "Offline"
msgstr "Nerkopplad"

#: gui/smartdialog.cpp:138 gui/devicepropsdialog.cpp:129
msgctxt "@label"
msgid "(unknown)"
msgstr "(okänd)"

#: gui/smartdialog.cpp:239 gui/mainwindow.cpp:920
#: gui/applyprogressdialog.cpp:412
msgctxt "@info"
msgid ""
"Could not create temporary file when trying to save to <filename>%1</"
"filename>."
msgstr ""
"Kunde inte skapa tillfällig fil vid försök att spara till <filename>%1</"
"filename>."

#: gui/smartdialog.cpp:239
msgctxt "@title:window"
msgid "Could Not Save SMART Report."
msgstr "Kunde inte spara SMART-rapport."

#: gui/editmountoptionsdialog.cpp:33
msgctxt "@title:window"
msgid "Edit additional mount options"
msgstr "Redigera ytterligare alternativ för monteringsplatser"

#: gui/infopane.cpp:113
msgctxt "@title:window"
msgid "Partition Information"
msgstr "Partitionsinformation"

#: gui/infopane.cpp:120 gui/infopane.cpp:133
msgctxt "@label partition"
msgid "File system:"
msgstr "Filsystem:"

#: gui/infopane.cpp:121 gui/infopane.cpp:134
msgctxt "@label partition"
msgid "Capacity:"
msgstr "Kapacitet:"

#: gui/infopane.cpp:122
msgctxt "@label partition"
msgid "Cipher name:"
msgstr "Kryptonamn:"

#: gui/infopane.cpp:123
msgctxt "@label partition"
msgid "Cipher mode:"
msgstr "Kryptoläge:"

#: gui/infopane.cpp:124
msgctxt "@label partition"
msgid "Hash:"
msgstr "Kondensat:"

#: gui/infopane.cpp:125
msgctxt "@label partition"
msgid "Key size:"
msgstr "Nyckelstorlek:"

#: gui/infopane.cpp:126
msgctxt "@label partition"
msgid "Payload offset:"
msgstr "Nyttolastens position:"

#: gui/infopane.cpp:127 gui/infopane.cpp:137
msgctxt "@label partition"
msgid "First sector:"
msgstr "Första sektor:"

#: gui/infopane.cpp:128 gui/infopane.cpp:138
msgctxt "@label partition"
msgid "Last sector:"
msgstr "Sista sektor:"

#: gui/infopane.cpp:129 gui/infopane.cpp:139
msgctxt "@label partition"
msgid "Number of sectors:"
msgstr "Antal sektorer:"

#: gui/infopane.cpp:135
msgctxt "@label partition"
msgid "Available:"
msgstr "Tillgängligt:"

#: gui/infopane.cpp:136
msgctxt "@label partition"
msgid "Used:"
msgstr "Använt:"

#: gui/infopane.cpp:150
msgctxt "@title:window"
msgid "Device Information"
msgstr "Enhetsinformation"

#: gui/infopane.cpp:154
msgctxt "@label device"
msgid "Path:"
msgstr "Sökväg:"

#: gui/infopane.cpp:162 gui/devicepropsdialog.cpp:79
msgctxt "@label device"
msgid "%1 (read only)"
msgstr "%1 (skrivskyddad)"

#: gui/infopane.cpp:167
msgctxt "@label device"
msgid "Type:"
msgstr "Typ:"

#: gui/infopane.cpp:168
msgctxt "@label device"
msgid "Capacity:"
msgstr "Kapacitet:"

#: gui/infopane.cpp:169
msgctxt "@label device"
msgid "Total sectors:"
msgstr "Totalt antal sektorer:"

#: gui/infopane.cpp:170
msgctxt "@label device"
msgid "Heads:"
msgstr "Huvuden:"

#: gui/infopane.cpp:171
msgctxt "@label device"
msgid "Cylinders:"
msgstr "Cylindrar:"

#: gui/infopane.cpp:172
msgctxt "@label device"
msgid "Sectors:"
msgstr "Sektorer:"

#: gui/infopane.cpp:173
msgctxt "@label device"
msgid "Logical sector size:"
msgstr "Logisk sektorstorlek:"

#: gui/infopane.cpp:174
msgctxt "@label device"
msgid "Physical sector size:"
msgstr "Fysisk sektorstorlek:"

#: gui/infopane.cpp:175
msgctxt "@label device"
msgid "Cylinder size:"
msgstr "Cylinderstorlek:"

#: gui/infopane.cpp:175 gui/devicepropsdialog.cpp:107
msgctxt "@label"
msgid "1 Sector"
msgid_plural "%1 Sectors"
msgstr[0] "1 sektor"
msgstr[1] "%1 sektorer"

#: gui/infopane.cpp:176
msgctxt "@label device"
msgid "Primaries/Max:"
msgstr "Primära/Max:"

#: gui/mainwindow.cpp:142
msgctxt "@info"
msgid ""
"<para>Do you really want to quit the application?</para><para>There is still "
"an operation pending.</para>"
msgid_plural ""
"<para>Do you really want to quit the application?</para><para>There are "
"still %1 operations pending.</para>"
msgstr[0] ""
"<para>Vill du verkligen avsluta programmet?</para><para>Det finns "
"fortfarande en åtgärd som väntar.</para>"
msgstr[1] ""
"<para>Vill du verkligen avsluta programmet?</para><para>Det finns "
"fortfarande %1 åtgärder som väntar.</para>"

#: gui/mainwindow.cpp:144
msgctxt "@title:window"
msgid "Discard Pending Operations and Quit?"
msgstr "Överge väntande åtgärder och avsluta?"

#: gui/mainwindow.cpp:145
msgctxt "@action:button"
msgid "Quit <application>%1</application>"
msgstr "Avsluta <application>%1</application>"

#: gui/mainwindow.cpp:188
msgctxt "@action:inmenu"
msgid "Undo"
msgstr "Ångra"

#: gui/mainwindow.cpp:189
msgctxt "@info:tooltip"
msgid "Undo the last operation"
msgstr "Ångra senaste åtgärd"

#: gui/mainwindow.cpp:190
msgctxt "@info:status"
msgid "Remove the last operation from the list."
msgstr "Ta bort den sista åtgärden från listan."

#: gui/mainwindow.cpp:196
msgctxt "@action:inmenu clear the list of operations"
msgid "Clear"
msgstr "Rensa"

#: gui/mainwindow.cpp:197
msgctxt "@info:tooltip"
msgid "Clear all operations"
msgstr "Rensa alla åtgärder"

#: gui/mainwindow.cpp:198
msgctxt "@info:status"
msgid "Empty the list of pending operations."
msgstr "Töm listan med väntande åtgärder."

#: gui/mainwindow.cpp:203
msgctxt "@action:inmenu apply all operations"
msgid "Apply"
msgstr "Verkställ"

#: gui/mainwindow.cpp:204
msgctxt "@info:tooltip"
msgid "Apply all operations"
msgstr "Verkställ alla åtgärder"

#: gui/mainwindow.cpp:205
msgctxt "@info:status"
msgid "Apply the pending operations in the list."
msgstr "Verkställ väntande åtgärder i listan."

#: gui/mainwindow.cpp:210
msgctxt "@action:inmenu refresh list of devices"
msgid "Refresh Devices"
msgstr "Uppdatera enheter"

#: gui/mainwindow.cpp:211
msgctxt "@info:tooltip"
msgid "Refresh all devices"
msgstr "Uppdatera alla enheter"

#: gui/mainwindow.cpp:212
msgctxt "@info:status"
msgid "Renew the devices list."
msgstr "Förnya enhetslistan."

#: gui/mainwindow.cpp:218
msgctxt "@action:inmenu"
msgid "New Partition Table"
msgstr "Ny partitionstabell"

#: gui/mainwindow.cpp:219
msgctxt "@info:tooltip"
msgid "Create a new partition table"
msgstr "Skapa en ny partitionstabell"

#: gui/mainwindow.cpp:220
msgctxt "@info:status"
msgid "Create a new and empty partition table on a device."
msgstr "Skapa en ny och tom partitionstabell på en enhet."

#: gui/mainwindow.cpp:226
msgctxt "@action:inmenu"
msgid "Export Partition Table"
msgstr "Exportera partitionstabell"

#: gui/mainwindow.cpp:227
msgctxt "@info:tooltip"
msgid "Export a partition table"
msgstr "Exportera en partitionstabell"

#: gui/mainwindow.cpp:228
msgctxt "@info:status"
msgid "Export the device's partition table to a text file."
msgstr "Exportera enhetens partitionstabell till en textfil."

#: gui/mainwindow.cpp:233
msgctxt "@action:inmenu"
msgid "Import Partition Table"
msgstr "Importera partitionstabell"

#: gui/mainwindow.cpp:234
msgctxt "@info:tooltip"
msgid "Import a partition table"
msgstr "Importera en partitionstabell"

#: gui/mainwindow.cpp:235
msgctxt "@info:status"
msgid "Import a partition table from a text file."
msgstr "Importera en partitionstabell från en textfil."

#: gui/mainwindow.cpp:240
msgctxt "@action:inmenu"
msgid "SMART Status"
msgstr "SMART-status:"

#: gui/mainwindow.cpp:241
msgctxt "@info:tooltip"
msgid "Show SMART status"
msgstr "Visa SMART-status:"

#: gui/mainwindow.cpp:242
msgctxt "@info:status"
msgid "Show the device's SMART status if supported"
msgstr "Visa enhetens SMART-status om den stöds"

#: gui/mainwindow.cpp:246 gui/mainwindow.cpp:321
msgctxt "@action:inmenu"
msgid "Properties"
msgstr "Egenskaper"

#: gui/mainwindow.cpp:247
msgctxt "@info:tooltip"
msgid "Show device properties dialog"
msgstr "Visa dialogrutan med enhetsegenskaper"

#: gui/mainwindow.cpp:248
msgctxt "@info:status"
msgid "View and modify device properties"
msgstr "Visa och ändra enhetsegenskaper"

#: gui/mainwindow.cpp:254
msgctxt "@action:inmenu create a new partition"
msgid "New"
msgstr "Ny"

#: gui/mainwindow.cpp:255
msgctxt "@info:tooltip"
msgid "New partition"
msgstr "Ny partition"

#: gui/mainwindow.cpp:256
msgctxt "@info:status"
msgid "Create a new partition."
msgstr "Skapa en ny partition."

#: gui/mainwindow.cpp:262
msgctxt "@action:inmenu"
msgid "Resize/Move"
msgstr "Ändra storlek eller flytta"

#: gui/mainwindow.cpp:263
msgctxt "@info:tooltip"
msgid "Resize or move partition"
msgstr "Ändra storlek eller flytta en partition"

#: gui/mainwindow.cpp:264
msgctxt "@info:status"
msgid "Shrink, grow or move an existing partition."
msgstr "Krymp, utöka eller flytta en befintlig partition."

#: gui/mainwindow.cpp:270
msgctxt "@action:inmenu"
msgid "Delete"
msgstr "Ta bort"

#: gui/mainwindow.cpp:271
msgctxt "@info:tooltip"
msgid "Delete partition"
msgstr "Ta bort partition"

#: gui/mainwindow.cpp:272
msgctxt "@info:status"
msgid "Delete a partition."
msgstr "Ta bort en partition."

#: gui/mainwindow.cpp:278
msgctxt "@action:inmenu"
msgid "Shred"
msgstr "Förstör"

#: gui/mainwindow.cpp:279
msgctxt "@info:tooltip"
msgid "Shred partition"
msgstr "Förstör partition"

#: gui/mainwindow.cpp:280
msgctxt "@info:status"
msgid "Shred a partition so that its contents cannot be restored."
msgstr "Förstör en partition så att dess innehåll inte kan återställas."

#: gui/mainwindow.cpp:286
msgctxt "@action:inmenu"
msgid "Copy"
msgstr "Kopiera"

#: gui/mainwindow.cpp:287
msgctxt "@info:tooltip"
msgid "Copy partition"
msgstr "Kopiera partition"

#: gui/mainwindow.cpp:288
msgctxt "@info:status"
msgid "Copy an existing partition."
msgstr "Kopiera en befintlig partition."

#: gui/mainwindow.cpp:294
msgctxt "@action:inmenu"
msgid "Paste"
msgstr "Klistra in"

#: gui/mainwindow.cpp:295
msgctxt "@info:tooltip"
msgid "Paste partition"
msgstr "Klistra in partition"

#: gui/mainwindow.cpp:296
msgctxt "@info:status"
msgid "Paste a copied partition."
msgstr "Klistra in en kopierad partition."

#: gui/mainwindow.cpp:302
msgctxt "@action:inmenu"
msgid "Edit Mount Point"
msgstr "Redigera monteringsplats"

#: gui/mainwindow.cpp:303
msgctxt "@info:tooltip"
msgid "Edit mount point"
msgstr "Redigera monteringsplats"

#: gui/mainwindow.cpp:304
msgctxt "@info:status"
msgid "Edit a partition's mount point and options."
msgstr "Redigera monteringsplatser och alternativ för en partition."

#: gui/mainwindow.cpp:308
msgctxt "@action:inmenu"
msgid "Mount"
msgstr "Montera"

#: gui/mainwindow.cpp:309
msgctxt "@info:tooltip"
msgid "Mount or unmount partition"
msgstr "Montera eller avmontera partition"

#: gui/mainwindow.cpp:310
msgctxt "@info:status"
msgid "Mount or unmount a partition."
msgstr "Montera eller avmontera en partition."

#: gui/mainwindow.cpp:314
msgctxt "@action:inmenu"
msgid "Check"
msgstr "Kontrollera"

#: gui/mainwindow.cpp:315
msgctxt "@info:tooltip"
msgid "Check partition"
msgstr "Kontrollera partition"

#: gui/mainwindow.cpp:316
msgctxt "@info:status"
msgid "Check a filesystem on a partition for errors."
msgstr "Kontrollera ett filsystem på en partition efter fel."

#: gui/mainwindow.cpp:322
msgctxt "@info:tooltip"
msgid "Show partition properties dialog"
msgstr "Visa dialogrutan med partitionsegenskaper"

#: gui/mainwindow.cpp:323
msgctxt "@info:status"
msgid "View and modify partition properties (label, partition flags, etc.)"
msgstr "Visa och ändra partitionsegenskaper (etikett, partitionsflaggor, etc.)"

#: gui/mainwindow.cpp:328
msgctxt "@action:inmenu"
msgid "Backup"
msgstr "Säkerhetskopiera"

#: gui/mainwindow.cpp:329
msgctxt "@info:tooltip"
msgid "Backup partition"
msgstr "Säkerhetskopiera partition"

#: gui/mainwindow.cpp:330
msgctxt "@info:status"
msgid "Backup a partition to an image file."
msgstr "Säkerhetskopiera en partition till en avbildsfil."

#: gui/mainwindow.cpp:335
msgctxt "@action:inmenu"
msgid "Restore"
msgstr "Återställ"

#: gui/mainwindow.cpp:336
msgctxt "@info:tooltip"
msgid "Restore partition"
msgstr "Återställ partition"

#: gui/mainwindow.cpp:337
msgctxt "@info:status"
msgid "Restore a partition from an image file."
msgstr "Återställ en partition från en avbildsfil."

#: gui/mainwindow.cpp:342
msgctxt "@action:inmenu"
msgid "File System Support"
msgstr "Filsystemstöd"

#: gui/mainwindow.cpp:343
msgctxt "@info:tooltip"
msgid "View file system support information"
msgstr "Visa information om filsystemstöd"

#: gui/mainwindow.cpp:344
msgctxt "@info:status"
msgid "Show information about supported file systems."
msgstr "Visa information om filsystem som stöds."

#: gui/mainwindow.cpp:356
msgctxt "@action:inmenu"
msgid "Clear Log"
msgstr "Rensa logg"

#: gui/mainwindow.cpp:357
msgctxt "@info:tooltip"
msgid "Clear the log output"
msgstr "Rensa loggutmatning"

#: gui/mainwindow.cpp:358
msgctxt "@info:status"
msgid "Clear the log output panel."
msgstr "Rensa loggutmatningspanelen."

#: gui/mainwindow.cpp:362
msgctxt "@action:inmenu"
msgid "Save Log"
msgstr "Spara logg"

#: gui/mainwindow.cpp:363
msgctxt "@info:tooltip"
msgid "Save the log output"
msgstr "Spara loggutmatningen"

#: gui/mainwindow.cpp:364
msgctxt "@info:status"
msgid "Save the log output to a file."
msgstr "Spara loggutmatningen i en fil."

#: gui/mainwindow.cpp:448
msgctxt "@info:status"
msgid "One pending operation"
msgid_plural "%1 pending operations"
msgstr[0] "En väntande åtgärd"
msgstr[1] "%1 väntande åtgärder"

#: gui/mainwindow.cpp:547
msgctxt "@info/plain"
msgid "Using backend plugin: %1 (%2)"
msgstr "Använt bakgrundsprogram: %1 (%2)"

#: gui/mainwindow.cpp:551
msgctxt "@info/plain"
msgid "Scanning devices..."
msgstr "Avsöker enheter..."

#: gui/mainwindow.cpp:583
msgctxt "@info/plain"
msgid "Scan finished."
msgstr "Avsökning klar."

#: gui/mainwindow.cpp:639
msgctxt "@info"
msgid ""
"<para>Do you really want to rescan the devices?</para><para><warning>This "
"will also clear the list of pending operations.</warning></para>"
msgstr ""
"<para>Vill du verkligen avsöka enheterna igen?</para><para><warning>Det "
"tömmer också listan med väntande åtgärder.</warning></para>"

#: gui/mainwindow.cpp:641
msgctxt "@title:window"
msgid "Really Rescan the Devices?"
msgstr "Avsök verkligen enheterna igen?"

#: gui/mainwindow.cpp:642
msgctxt "@action:button"
msgid "Rescan Devices"
msgstr "Avsök enheter igen"

#: gui/mainwindow.cpp:658
msgctxt "@info"
msgid ""
"<para>Do you really want to apply the pending operations listed below?</"
"para><para><warning>This will permanently modify your disks.</warning></para>"
msgstr ""
"<para>Vill du verkligen verkställa de väntande åtgärderna listade nedan?</"
"para><para><warning>Detta kommer att permanent ändra diskarna.</warning></"
"para>"

#: gui/mainwindow.cpp:660
msgctxt "@title:window"
msgid "Apply Pending Operations?"
msgstr "Verkställ väntande åtgärder?"

#: gui/mainwindow.cpp:661
msgctxt "@action:button"
msgid "Apply Pending Operations"
msgstr "Verkställ väntande åtgärder"

#: gui/mainwindow.cpp:664
msgctxt "@info/plain"
msgid "Applying operations..."
msgstr "Verkställer åtgärder..."

#: gui/mainwindow.cpp:690
msgctxt "@info/plain"
msgid "Undoing operation: %1"
msgstr "Ångrar åtgärd: %1"

#: gui/mainwindow.cpp:706
msgctxt "@info"
msgid "Do you really want to clear the list of pending operations?"
msgstr "Vill du verkligen rensa listan med väntande åtgärder?"

#: gui/mainwindow.cpp:707
msgctxt "@title:window"
msgid "Clear Pending Operations?"
msgstr "Rensa väntande åtgärder?"

#: gui/mainwindow.cpp:708
msgctxt "@action:button"
msgid "Clear Pending Operations"
msgstr "Rensa väntande åtgärder"

#: gui/mainwindow.cpp:711
msgctxt "@info/plain"
msgid "Clearing the list of pending operations."
msgstr "Rensar listan med väntande åtgärder."

#: gui/mainwindow.cpp:749
msgctxt "@info"
msgid "Could not open input file <filename>%1</filename> for import: %2"
msgstr "Kunde inte öppna indatafilen <filename>%1</filename> för import: %2"

#: gui/mainwindow.cpp:749 gui/mainwindow.cpp:757
msgctxt "@title:window"
msgid "Error Importing Partition Table"
msgstr "Fel vid import av partitionstabell"

#: gui/mainwindow.cpp:757
msgctxt "@info"
msgid ""
"Could not open temporary file <filename>%1</filename> while trying to import "
"from <filename>%2</filename>."
msgstr ""
"Kunde inte öppna tillfällig fil <filename>%1</filename> vid försök att "
"importera från <filename>%2</filename>."

#: gui/mainwindow.cpp:783
msgctxt "@info"
msgid ""
"The import file <filename>%1</filename> does not contain a valid partition "
"table."
msgstr ""
"Importfilen <filename>%1</filename> innehåller inte en giltig "
"partitionstabell."

#: gui/mainwindow.cpp:783 gui/mainwindow.cpp:796 gui/mainwindow.cpp:804
#: gui/mainwindow.cpp:810 gui/mainwindow.cpp:825 gui/mainwindow.cpp:839
#: gui/mainwindow.cpp:845 gui/mainwindow.cpp:867 gui/mainwindow.cpp:873
#: gui/mainwindow.cpp:879 gui/mainwindow.cpp:887
msgctxt "@title:window"
msgid "Error While Importing Partition Table"
msgstr "Fel vid import av partitionstabell"

#: gui/mainwindow.cpp:796
msgctxt "@info"
msgid "Found more than one partition table type in import file (line %1)."
msgstr "Hittade mer än en typ av partitionstabell i importfilen (rad %1)."

#: gui/mainwindow.cpp:804
msgctxt "@info"
msgid "Partition table type \"%1\" is unknown (line %2)."
msgstr "Partitionstabellens typ \"%1\" är okänd (rad %2)."

#: gui/mainwindow.cpp:810
msgctxt "@info"
msgid "Partition table type \"%1\" is not supported for import (line %2)."
msgstr "Partitionstabellens typ \"%1\" stöds inte vid import (rad %2)."

#: gui/mainwindow.cpp:825
msgctxt "@info"
msgid "Found partition but no partition table type (line %1)."
msgstr "Hittade partition men ingen typ för partitionstabellen (rad %1)."

#: gui/mainwindow.cpp:839
msgctxt "@info the partition is NOT a device path, just a number"
msgid "Partition %1 would be outside the device's boundaries (line %2)."
msgstr "Partition %1 skulle vara utanför enhetens gränser (rad %2)."

#: gui/mainwindow.cpp:845
msgctxt "@info"
msgid "Partition %1 has end before start sector (line %2)."
msgstr "Partitionen %1 har slutsektor före startsektor (rad %2)"

#: gui/mainwindow.cpp:867
msgctxt "@info the partition is NOT a device path, just a number"
msgid "Unrecognized partition role \"%1\" for partition %2 (line %3)."
msgstr "Okänd partitionsroll \"%1\" för partitionen %2 (rad %3)."

#: gui/mainwindow.cpp:873
msgctxt "@info the partition is NOT a device path, just a number"
msgid ""
"No parent partition or partition table found for partition %1 (line %2)."
msgstr ""
"Ingen överliggande partition eller partitionstabell hittades för partitionen "
"%1 (rad %2)."

#: gui/mainwindow.cpp:879
msgctxt "@info"
msgid ""
"The partition table type \"%1\" does not support extended partitions, but "
"one was found (line %2)."
msgstr ""
"Partitionstabellens typ \"%1\" stöder inte utökade partitioner, men en sådan "
"hittades (rad %2)."

#: gui/mainwindow.cpp:887
msgctxt "@info the partition is NOT a device path, just a number"
msgid "Could not create file system \"%1\" for partition %2 (line %3)."
msgstr "Kunde inte skapa filsystemet \"%1\" för partitionen %2 (rad %3)."

#: gui/mainwindow.cpp:899
msgctxt "@info/plain"
msgid "Could not parse line %1 from import file. Ignoring it."
msgstr "Kunde inte tolka rad %1 från importfilen. Den ignoreras."

#: gui/mainwindow.cpp:920
msgctxt "@title:window"
msgid "Error Exporting Partition Table"
msgstr "Fel vid export av partitionstabell"

#: gui/mainwindow.cpp:1062
msgctxt "@info"
msgid ""
"<para>No support tools were found for file systems currently present on hard "
"disks in this computer:</para><table style='margin-top:12px'><tr><td "
"style='font-weight:bold;padding-right:12px;white-space:nowrap;'>Partition</"
"td><td style='font-weight:bold;padding-right:12px;white-space:nowrap;'>File "
"System</td><td style='font-weight:bold;padding-right:12px;white-space:"
"nowrap;'>Support Tools</td><td style='font-weight:bold;padding-right:12px;"
"white-space:nowrap;'>URL</td></tr>%1</table><para>As long as the support "
"tools for these file systems are not installed you will not be able to "
"modify them.</para><para>You should find packages with these support tools "
"in your distribution's package manager.</para>"
msgstr ""
"<para>Inga stödverktyg hittades för filsystemen som för närvarande finns på "
"hårddiskarna i den här datorn:</para><table style='margin-top:12px'><tr><td "
"style='font-weight:bold;padding-right:12px;white-space:nowrap;'>Partition</"
"td><td style='font-weight:bold;padding-right:12px;white-space:"
"nowrap;'>Filsystem</td><td style='font-weight:bold;padding-right:12px;white-"
"space:nowrap;'>Stödverktyg</td><td style='font-weight:bold;padding-"
"right:12px;white-space:nowrap;'>Webbadress</td></tr>%1</table><para>Innan "
"stödverktyg för dessa filsystem har installerats, kommer du inte att kunna "
"ändra dem.</para><para>Du bör hitta paket med dessa stödverktyg i "
"distributionens pakethanterare.</para>"

#: gui/mainwindow.cpp:1075
msgctxt "@title:window"
msgid "Missing File System Support Packages"
msgstr "Saknar stödpaket för filsystem"

#: gui/filesystemsupportdialog.cpp:39
msgctxt "@title:window"
msgid "File System Support"
msgstr "Stöd för filsystem"

#: gui/scanprogressdialog.cpp:27
msgctxt "@title:window"
msgid "Scanning devices..."
msgstr "Avsöker enheter..."

#: gui/scanprogressdialog.cpp:36
msgctxt "@label"
msgid "Scanning..."
msgstr "Avsöker..."

#: gui/scanprogressdialog.cpp:38
msgctxt "@label"
msgid "Scanning device: <filename>%1</filename>"
msgstr "Avsöker enhet: <filename>%1</filename>"

#: gui/devicepropsdialog.cpp:52
msgctxt "@title:window"
msgid "Device Properties: <filename>%1</filename>"
msgstr "Enhetsegenskaper: <filename>%1</filename>"

#: gui/partpropsdialog.cpp:54
msgctxt "@title:window"
msgid "Partition properties: <filename>%1</filename>"
msgstr "Partitionsegenskaper: <filename>%1</filename>"

#: gui/partpropsdialog.cpp:102
msgctxt "@item mountpoint"
msgid "(none found)"
msgstr "(ingen hittades)"

#: gui/partpropsdialog.cpp:108
msgctxt "@label partition state"
msgid "idle"
msgstr "overksam"

#: gui/partpropsdialog.cpp:112
msgctxt "@label partition state"
msgid "At least one logical partition is mounted."
msgstr "Åtminstone en logisk partition är monterad."

#: gui/partpropsdialog.cpp:114
msgctxt "@label partition state"
msgid "mounted on <filename>%1</filename>"
msgstr "monterad som <filename>%1</filename>"

#: gui/partpropsdialog.cpp:116
msgctxt "@label partition state"
msgid "mounted"
msgstr "monterad"

#: gui/partpropsdialog.cpp:120
msgctxt "@item uuid"
msgid "(none)"
msgstr "(ingen)"

#: gui/partpropsdialog.cpp:327
msgctxt "@info"
msgid ""
"<para><warning>You are about to lose all data on partition <filename>%1</"
"filename>.</warning></para><para>Changing the file system on a partition "
"already on disk will erase all its contents. If you continue now and apply "
"the resulting operation in the main window, all data on <filename>%1</"
"filename> will unrecoverably be lost.</para>"
msgstr ""
"<para><warning>Du kommer nu att förlora all data på partitionen <filename>"
"%1</filename>.</warning></para><para>Att ändra filsystemet på en partition "
"som redan finns på disken tar bort hela dess innehåll. Om du fortsätter nu "
"och verkställer den resulterande åtgärden i huvudfönstret, kommer all data "
"på <filename>%1</filename> gå förlorad utan möjlighet att återställa.</para>"

#: gui/partpropsdialog.cpp:329
msgctxt "@title:window"
msgid "Really Recreate <filename>%1</filename> with File System %2?"
msgstr "Verkligen skapa om <filename>%1</filename> med filsystemet %2?"

#: gui/partpropsdialog.cpp:330
msgctxt "@action:button"
msgid "Change the File System"
msgstr "Ändra filsystemet"

#: gui/partpropsdialog.cpp:331
msgctxt "@action:button"
msgid "Do Not Change the File System"
msgstr "Ändra inte filsystemet"

#: gui/partpropsdialog.cpp:352
msgctxt "@info"
msgid ""
"<para><warning>You are about to lose all data on partition <filename>%1</"
"filename>.</warning></para><para>Recreating a file system will erase all its "
"contents. If you continue now and apply the resulting operation in the main "
"window, all data on <filename>%1</filename> will unrecoverably be lost.</"
"para>"
msgstr ""
"<para><warning>Du kommer nu att förlora all data på partitionen <filename>"
"%1</filename>.</warning></para><para>Att återskapa ett filsystem tar bort "
"hela dess innehåll. Om du fortsätter nu och verkställer den resulterande "
"åtgärden i huvudfönstret, kommer all data på <filename>%1</filename> gå "
"förlorad utan möjlighet att återställa.</para>"

#: gui/partpropsdialog.cpp:354
msgctxt "@title:window"
msgid "Really Recreate File System on <filename>%1</filename>?"
msgstr "Skapa verkligen om filsystemet på <filename>%1</filename>?"

#: gui/partpropsdialog.cpp:355
msgctxt "@action:button"
msgid "Recreate the File System"
msgstr "Skapa om filsystemet"

#: gui/partpropsdialog.cpp:356
msgctxt "@action:button"
msgid "Do Not Recreate the File System"
msgstr "Skapa inte om filsystemet"

#: gui/applyprogressdialog.cpp:119
msgctxt "@info:progress"
msgid "Setting up..."
msgstr "Ställer in..."

#: gui/applyprogressdialog.cpp:177
msgctxt "@info:progress"
msgid "Waiting for operation to finish..."
msgstr "Väntar på att åtgärden ska avslutas..."

#: gui/applyprogressdialog.cpp:188
msgctxt "@info"
msgid "Do you really want to cancel?"
msgstr "Vill du verkligen avbryta?"

#: gui/applyprogressdialog.cpp:188
msgctxt "@title:window"
msgid "Cancel Running Operations"
msgstr "Avbryt pågående åtgärder"

#: gui/applyprogressdialog.cpp:188
msgctxt "@action:button"
msgid "Yes, Cancel Operations"
msgstr "Ja, avbryt åtgärder"

#: gui/applyprogressdialog.cpp:205
msgctxt "@info:progress"
msgid "All operations successfully finished."
msgstr "Alla åtgärder avslutade med lyckat resultat."

#: gui/applyprogressdialog.cpp:210
msgctxt "@info:progress"
msgid "Operations cancelled."
msgstr "Åtgärder avbrutna."

#: gui/applyprogressdialog.cpp:215
msgctxt "@info:progress"
msgid "There were errors while applying operations. Aborted."
msgstr "Fel uppstod när åtgärder verkställdes. Avbruten."

#: gui/applyprogressdialog.cpp:326
msgctxt "@info:progress"
msgid "[%1/%2] - %3: %4"
msgstr "[%1/%2] - %3: %4"

#: gui/applyprogressdialog.cpp:362
msgctxt "@info:progress"
msgid "Total Time: %1"
msgstr "Total tid: %1"

#: gui/applyprogressdialog.cpp:412
msgctxt "@title:window"
msgid "Could Not Save Report."
msgstr "Kunde inte spara rapport."

#: gui/applyprogressdialog.cpp:438
msgctxt "@info"
msgid ""
"The configured external browser could not be run. Please check your settings."
msgstr ""
"Den inställda externa webbläsaren kunde inte köras. Kontrollera dina "
"inställningar."

#: gui/applyprogressdialog.cpp:438 gui/applyprogressdialog.cpp:441
msgctxt "@title:window"
msgid "Could Not Launch Browser."
msgstr "Kunde inte starta webbläsare."

#: gui/applyprogressdialog.cpp:441
msgctxt "@info"
msgid "Could not create temporary file <filename>%1</filename> for writing."
msgstr "Kunde inte skapa tillfällig fil <filename>%1</filename> för skrivning."

#: gui/parttablewidget.cpp:36
msgctxt "@info"
msgid "Please select a device."
msgstr "Välj en enhet."

#: gui/parttablewidget.cpp:63
msgctxt "@info"
msgid "No valid partition table was found on this device."
msgstr "Ingen giltig partitionstabell hittades på enheten."

#: gui/sizedialogbase.cpp:57
msgctxt "@item:button advanced settings button"
msgid "Advanced"
msgstr "Avancerat"

#: gui/newdialog.cpp:47
msgctxt "@title:window"
msgid "Create a new partition"
msgstr "Skapa en ny partition"

#: gui/resizedialog.cpp:48
msgctxt "@title:window"
msgid "Resize/move partition: <filename>%1</filename>"
msgstr "Ändra storlek eller flytta partition: <filename>%1</filename>"

#: gui/editmountpointdialog.cpp:36
msgctxt "@title:window"
msgid "Edit mount point for <filename>%1</filename>"
msgstr "Redigera monteringsplats för <filename>%1</filename>"

#: gui/editmountpointdialog.cpp:51
msgctxt "@info"
msgid ""
"<para>Are you sure you want to save the changes you made to the system table "
"file <filename>/etc/fstab</filename>?</para><para><warning>This will "
"overwrite the existing file on your hard drive now. This <strong>can not be "
"undone</strong>.</warning></para>"
msgstr ""
"<para>Är du säker på att du vill spara ändringarna du gjorde i "
"systemtabellfilen <filename>/etc/fstab</filename>?</para><para><warning>Det "
"skriver direkt över den befintliga filen på hårddisken. Det <strong>kan inte "
"ångras</strong>.</warning></para>"

#: gui/editmountpointdialog.cpp:53
msgctxt "@title:window"
msgid "Really save changes?"
msgstr "Verkligen spara ändringarna?"

#: gui/editmountpointdialog.cpp:54
msgctxt "@action:button"
msgid "Save changes"
msgstr "Spara ändringar"

#: gui/partitionmanagerwidget.cpp:406
msgctxt "@info"
msgid ""
"The file system on partition <filename>%1</filename> could not be mounted."
msgstr ""
"Filsystemet på partitionen <filename>%1</filename> kunde inte monteras."

#: gui/partitionmanagerwidget.cpp:406
msgctxt "@title:window"
msgid "Could Not Mount File System."
msgstr "Kunde inte montera filsystem."

#: gui/partitionmanagerwidget.cpp:411
msgctxt "@info"
msgid ""
"The file system on partition <filename>%1</filename> could not be unmounted."
msgstr ""
"Filsystemet på partitionen <filename>%1</filename> kunde inte avmonteras."

#: gui/partitionmanagerwidget.cpp:411
msgctxt "@title:window"
msgid "Could Not Unmount File System."
msgstr "Kunde inte avmontera filsystem."

#: gui/partitionmanagerwidget.cpp:453
msgctxt "@info"
msgid ""
"<para>There is already one primary partition on this device. This is the "
"maximum number its partition table type can handle.</para><para>You cannot "
"create, paste or restore a primary partition on it before you delete an "
"existing one.</para>"
msgid_plural ""
"<para>There are already %1 primary partitions on this device. This is the "
"maximum number its partition table type can handle.</para><para>You cannot "
"create, paste or restore a primary partition on it before you delete an "
"existing one.</para>"
msgstr[0] ""
"<para>Det finns redan en primär partition på enheten. Det är det maximala "
"antalet som dess typ av partitionstabell kan hantera.</para><para>Du kan "
"inte skapa, klistra in eller återställa en primär partition på den innan du "
"har tagit bort en befintlig.</para>"
msgstr[1] ""
"<para>Det finns redan %1 primära partitioner på enheten. Det är det maximala "
"antalet som dess typ av partitionstabell kan hantera.</para><para>Du kan "
"inte skapa, klistra in eller återställa en primär partition på den innan du "
"har tagit bort en befintlig.</para>"

#: gui/partitionmanagerwidget.cpp:457
msgctxt "@title:window"
msgid "Too Many Primary Partitions."
msgstr "För många primära partitioner."

#: gui/partitionmanagerwidget.cpp:522
msgctxt "@info"
msgid ""
"<para>The partition <filename>%1</filename> cannot currently be deleted "
"because one or more partitions with higher logical numbers are still mounted."
"</para><para>Please unmount all partitions with higher logical numbers than "
"%2 first.</para>"
msgstr ""
"<para>Partitionen <filename>%1</filename> kan för närvarande inte tas bort "
"eftersom en eller flera partitioner med högre logiska nummer fortfarande är "
"monterade.</para><para>Avmontera alla partitioner med högre logiska nummer "
"än %2 först.</para>"

#: gui/partitionmanagerwidget.cpp:525
msgctxt "@title:window"
msgid "Cannot Delete Partition."
msgstr "Kan inte ta bort partition"

#: gui/partitionmanagerwidget.cpp:535
msgctxt "@info"
msgid ""
"Do you really want to delete the partition that is currently in the "
"clipboard? It will no longer be available for pasting after it has been "
"deleted."
msgstr ""
"Vill du verkligen ta bort partitionen som för närvarande finns på "
"klippbordet? Den kommer inte längre att vara tillgänglig för att klistra in "
"efter den har tagits bort."

#: gui/partitionmanagerwidget.cpp:537
msgctxt "@title:window"
msgid "Really Delete Partition in the Clipboard?"
msgstr "Verkligen ta bort partitionen på klippbordet?"

#: gui/partitionmanagerwidget.cpp:538
msgctxt "@action:button"
msgid "Delete It"
msgstr "Ta bort den"

#: gui/partitionmanagerwidget.cpp:584
msgctxt "@info/plain"
msgid ""
"Partition <filename>%1</filename> has the same position and size after "
"resize/move. Ignoring operation."
msgstr ""
"Partitionen <filename>%1</filename> har samma position och storlek efter "
"storleksändring eller förflyttning. Ignorerar åtgärden."

#: gui/partitionmanagerwidget.cpp:614
msgctxt "@info/plain"
msgid "Partition <filename>%1</filename> has been copied to the clipboard."
msgstr "Partitionen <filename>%1</filename> har kopierats till klippbordet."

#: gui/partitionmanagerwidget.cpp:683
msgctxt "@info"
msgid ""
"<para><warning>You are about to lose all data on partition <filename>%1</"
"filename>.</warning></para><para>Overwriting one partition with another (or "
"with an image file) will destroy all data on this target partition.</"
"para><para>If you continue now and apply the resulting operation in the main "
"window, all data currently stored on <filename>%1</filename> will "
"unrecoverably be overwritten.</para>"
msgstr ""
"<para><warning>Du kommer nu att förlora all data på partitionen <filename>"
"%1</filename>.</warning></para><para>Att skriva över en partitione med en "
"annan (eller med en avbildsfil) förstör all data på målpartitionen.</"
"para><para>Om du fortsätter nu och verkställer den resulterande åtgärden i "
"huvudfönstret, kommer all data lagrad på <filename>%1</filename> skrivas "
"över utan möjlighet att återställa.</para>"

#: gui/partitionmanagerwidget.cpp:691
msgctxt "@title:window"
msgid "Really Overwrite Existing Partition?"
msgstr "Skriv över befintlig partition?"

#: gui/partitionmanagerwidget.cpp:692
msgctxt "@action:button"
msgid "Overwrite Partition"
msgstr "Skriv över partition"

#: gui/partitionmanagerwidget.cpp:701
msgctxt "@info"
msgid ""
"<para>The selected partition is not large enough to hold the source "
"partition or the backup file.</para><para>Pick another target or resize this "
"partition so it is as large as the source.</para>"
msgstr ""
"<para>Den valda partitionen är inte stor nog att innehålla källpartitionen "
"eller säkerhetskopieringsfilen.</para><para>Välj ett annat mål eller ändra "
"storlek på denna partition så att den är lika stor som källan.</para>"

#: gui/partitionmanagerwidget.cpp:702
msgctxt "@title:window"
msgid "Target Not Large Enough"
msgstr "Mål inte stort nog"

#: gui/partitionmanagerwidget.cpp:705
msgctxt "@info"
msgid ""
"<para>It is not possible to create the target partition large enough to hold "
"the source.</para><para>This may happen if not all partitions on a device "
"are correctly aligned or when copying a primary partition into an extended "
"partition.</para>"
msgstr ""
"<para>Det är inte möjligt att skapa målpartitionen stor nog för att "
"innehålla källan.</para><para>Det kan inträffa om inte alla partitioner på "
"en enhet är riktigt justerade, eller vid kopiering av en primär partition "
"till en utökad partition.</para>"

#: gui/partitionmanagerwidget.cpp:708
msgctxt "@title:window"
msgid "Cannot Create Target Partition."
msgstr "Kan inte skapa målpartition."

#: gui/partitionmanagerwidget.cpp:746
msgctxt "@info"
msgid "Do you want to overwrite the existing file <filename>%1</filename>?"
msgstr "Vill du skriva över den befintliga filen <filename>%1</filename>?"

#: gui/partitionmanagerwidget.cpp:746
msgctxt "@title:window"
msgid "Overwrite Existing File?"
msgstr "Skriv över befintlig fil?"

#: gui/partitionmanagerwidget.cpp:746
msgctxt "@action:button"
msgid "Overwrite File"
msgstr "Skriv över fil"

#: gui/partitionmanagerwidget.cpp:773
msgctxt "@info"
msgid ""
"The file system in the image file <filename>%1</filename> is too large to be "
"restored to the selected partition."
msgstr ""
"Filsystemet i avbildsfilen <filename>%1</filename> är för stort för att "
"återställas till den valda partitionen."

#: gui/partitionmanagerwidget.cpp:773
msgctxt "@title:window"
msgid "Not Enough Space to Restore File System."
msgstr "Inte tillräckligt med utrymme för att återställa filsystem."

#: gui/treelog.cpp:131
msgctxt "@info"
msgid "Could not create temporary output file to save <filename>%1</filename>."
msgstr ""
"Kunde inte skapa tillfällig utdatafil för att spara <filename>%1</filename>."

#: gui/treelog.cpp:131
msgctxt "@title:window"
msgid "Error Saving Log File"
msgstr "Fel när loggfilen skulle sparas"

#: gui/decryptluksdialog.cpp:37
msgctxt "@title:window"
msgid "Decrypt LUKS partition on <filename>%1</filename>"
msgstr "Avkoda LUKS-partition på <filename>%1</filename>"

#: gui/decryptluksdialog.cpp:38
msgctxt "@action:button"
msgid "&Decrypt"
msgstr "A&vkoda"

#: gui/insertdialog.cpp:43
msgctxt "@title:window"
msgid "Insert a partition"
msgstr "Infoga en partition"

#: util/externalcommand.cpp:126
msgctxt "@info/plain"
msgid "Command: %1"
msgstr "Kommando: %1"

#: util/externalcommand.cpp:134
msgctxt "@info/plain"
msgid "(Command timeout while starting \"%1\")"
msgstr "(Tidsgräns för kommando överskreds vid start av \"%1\")"

#: util/externalcommand.cpp:156
msgctxt "@info/plain"
msgid "(Command timeout while running \"%1\")"
msgstr "(Tidsgräns för kommando överskreds under körning av \"%1\")"

#: util/helpers.cpp:104
msgctxt "@info"
msgid ""
"<para><warning>You do not have administrative privileges.</warning></"
"para><para>It is possible to run <application>%1</application> without these "
"privileges. You will, however, <emphasis>not</emphasis> be allowed to apply "
"operations.</para><para>Do you want to continue running <application>%1</"
"application>?</para>"
msgstr ""
"<para><warning>Du har inte administratörsrättigheter.</warning></"
"para><para>Det är möjligt att köra <application>%1</application> utan dem. "
"Du kommer dock <emphasis>inte</emphasis> tillåtas att verkställa åtgärder.</"
"para><para>Vill du fortsätta att köra <application>%1</application>?</para>"

#: util/helpers.cpp:109
msgctxt "@title:window"
msgid "No administrative privileges"
msgstr "Inga administratörsrättigheter"

#: util/helpers.cpp:110
msgctxt "@action:button"
msgid "Run without administrative privileges"
msgstr "Kör utan administratörsrättigheter"

#: util/helpers.cpp:123
msgctxt "@title"
msgid "<application>KDE Partition Manager</application>"
msgstr "<application>KDE:s partitionshanterare</application>"

#: util/helpers.cpp:125
msgctxt "@title"
msgid "Manage your disks, partitions and file systems"
msgstr "Hantera diskar, partitioner och filsystem"

#: util/helpers.cpp:127
#, fuzzy
msgctxt "@info:credit"
msgid "© 2008-2013 Volker Lanz"
msgstr "Copyright 2008,2009,2010 Volker Lanz"

#: util/helpers.cpp:130
msgctxt "@info:credit"
msgid "Former maintainer"
msgstr "Tidigare underhåll"

#: util/helpers.cpp:133
msgid "Hugo Pereira Da Costa"
msgstr "Hugo Pereira Da Costa"

#: util/helpers.cpp:133
msgctxt "@info:credit"
msgid "Partition Widget Design"
msgstr "Konstruktion av grafisk partitionskomponent"

#: util/helpers.cpp:134
msgid "Andrius Štikonas"
msgstr "Andrius Štikonas"

#: util/helpers.cpp:134
msgctxt "@info:credit"
msgid "Btrfs support"
msgstr "Stöd för Btrfs"

#: util/helpers.cpp:165
msgctxt "@title:menu"
msgid "Columns"
msgstr "Kolumner"

#: util/helpers.cpp:199
msgctxt "@info"
msgid ""
"<para>The configured backend plugin \"%1\" could not be loaded.</"
"para><para>Loading the default backend plugin \"%2\" instead.</para>"
msgstr ""
"<para>Det inställda bakgrundsprogrammet \"%1\" kunde inte läsas in.</"
"para><para>Läser in det förvalda bakgrundsprogrammet \"%2\" istället.</para>"

#: util/helpers.cpp:202 util/helpers.cpp:211
msgctxt "@title:window"
msgid "Error: Could Not Load Backend Plugin"
msgstr "Fel: Kunde inte läsa in bakgrundsprogrammet"

#: util/helpers.cpp:208
msgctxt "@info"
msgid ""
"<para>Neither the configured (\"%1\") nor the default (\"%2\") backend "
"plugin could be loaded.</para><para>Please check your installation.</para>"
msgstr ""
"<para>Varken det inställda (\"%1\") eller det förvalda (\"%2\") "
"bakgrundsprogrammet kunde inte läsas in.</para><para>Kontrollera din "
"installation.</para>"

#: util/helpers.cpp:224
msgctxt "@info"
msgid ""
"<para>No usable devices could be found.</para><para>Make sure you have "
"sufficient privileges to access block devices on your system.</para>"
msgstr ""
"<para>Inga användbara enheter kunde hittas.</para><para>Försäkra dig om att "
"du har tillräckliga rättigheter för att komma åt blockenheter på systemet.</"
"para>"

#: util/helpers.cpp:226
msgctxt "@title:window"
msgid "Error: No Usable Devices Found"
msgstr "Fel: Inga användbara enheter hittades"

#: util/capacity.cpp:117
msgctxt "@info/plain unit"
msgid "Byte"
msgid_plural "Bytes"
msgstr[0] "Byte"
msgstr[1] "Byte"

#: util/capacity.cpp:118
msgctxt "@info/plain unit"
msgid "KiB"
msgstr "KiB"

#: util/capacity.cpp:119
msgctxt "@info/plain unit"
msgid "MiB"
msgstr "MiB"

#: util/capacity.cpp:120
msgctxt "@info/plain unit"
msgid "GiB"
msgstr "GiB"

#: util/capacity.cpp:121
msgctxt "@info/plain unit"
msgid "TiB"
msgstr "TiB"

#: util/capacity.cpp:122
msgctxt "@info/plain unit"
msgid "PiB"
msgstr "PiB"

#: util/capacity.cpp:123
msgctxt "@info/plain unit"
msgid "EiB"
msgstr "EiB"

#: util/capacity.cpp:124
msgctxt "@info/plain unit"
msgid "ZiB"
msgstr "ZiB"

#: util/capacity.cpp:125
msgctxt "@info/plain unit"
msgid "YiB"
msgstr "YiB"

#: util/capacity.cpp:129
msgctxt "@info/plain unit"
msgid "(unknown unit)"
msgstr "(okänd enhet)"

#: util/htmlreport.cpp:65 util/htmlreport.cpp:72
msgid "%1: SMART Status Report"
msgstr "%1: SMART-statusrapport"

#: util/htmlreport.cpp:80
msgid "Date:"
msgstr "Datum:"

#: util/htmlreport.cpp:81
msgid "Program version:"
msgstr "Programversion:"

#: util/htmlreport.cpp:82
msgid "Backend:"
msgstr "Bakgrundsprogram:"

#: util/htmlreport.cpp:83
msgid "KDE version:"
msgstr "KDE-version:"

#: util/htmlreport.cpp:84
msgid "Machine:"
msgstr "Dator:"

#~ msgctxt "NAME OF TRANSLATORS"
#~ msgid "Your names"
#~ msgstr "Stefan Asserhäll"

#~ msgctxt "EMAIL OF TRANSLATORS"
#~ msgid "Your emails"
#~ msgstr "stefan.asserhall@bredband.net"