mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-11 07:24:46 +00:00
c7360f17fb
Board introductions have a feature list which isn't formatted properly according to rST and is thus rendered incorrectly. Fix this by adding the missing newlines in the appropriate places. Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
127 lines
3.6 KiB
ReStructuredText
127 lines
3.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
RK3399-Q7 Puma
|
|
==============
|
|
|
|
The RK3399-Q7 (Puma) is a system-on-module featuring the Rockchip
|
|
RK3399 in a Qseven-compatible form-factor.
|
|
|
|
RK3399-Q7 features:
|
|
|
|
* CPU: ARMv8 64bit Big-Little architecture,
|
|
|
|
* Big: dual-core Cortex-A72
|
|
* Little: quad-core Cortex-A53
|
|
* IRAM: 200KB
|
|
* DRAM: 4GB-128MB dual-channel
|
|
|
|
* eMMC: onboard eMMC
|
|
* SD/MMC
|
|
* GbE (onboard Micrel KSZ9031) Gigabit ethernet PHY
|
|
* USB:
|
|
|
|
* USB3.0 dual role port
|
|
* 2x USB3.0 host, 1x USB2.0 host via onboard USB3.0 hub
|
|
|
|
* Display: HDMI/eDP/MIPI
|
|
* Camera: 2x CSI (one on the edge connector, one on the Q7 specified CSI ZIF)
|
|
* NOR Flash: onboard SPI NOR
|
|
* Companion Controller: onboard additional Cortex-M0 microcontroller
|
|
|
|
* RTC
|
|
* fan controller
|
|
* CAN
|
|
|
|
Here is the step-by-step to boot to U-Boot on RK3399-Q7 from Theobroma Systems.
|
|
|
|
Get the Source and build ATF binary
|
|
-----------------------------------
|
|
|
|
.. prompt:: bash
|
|
|
|
git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
|
|
cd trusted-firmware-a
|
|
make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
|
|
export BL31=$PWD/build/rk3399/release/bl31/bl31.elf
|
|
|
|
Compile the U-Boot
|
|
------------------
|
|
|
|
.. prompt:: bash
|
|
|
|
cd ../u-boot
|
|
make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all
|
|
|
|
This will build ``u-boot-rockchip.bin`` which can be written to an MMC device
|
|
(eMMC or SD card), and ``u-boot-rockchip-spi.bin`` which can be written to the
|
|
SPI-NOR flash.
|
|
|
|
Flash the image
|
|
---------------
|
|
|
|
Copy ``u-boot-rockchip.bin`` to offset 32k for SD/eMMC.
|
|
Copy ``u-boot-rockchip-spi.bin`` to offset 0 for NOR-flash.
|
|
|
|
SD-Card
|
|
~~~~~~~
|
|
|
|
.. prompt:: bash
|
|
|
|
dd if=u-boot-rockchip.bin of=/dev/sdX seek=64
|
|
|
|
.. note::
|
|
|
|
Replace ``/dev/sdX`` to match your SD card kernel device.
|
|
|
|
eMMC
|
|
~~~~
|
|
|
|
``rkdeveloptool`` allows to flash the on-board eMMC via the USB OTG interface
|
|
with help of the Rockchip loader binary.
|
|
|
|
To enter the USB flashing mode on Haikou baseboard, remove any SD card, insert a
|
|
micro-USB cable in the ``Q7 USB P1`` connector (P8), move ``SW5`` switch into
|
|
``BIOS Disable`` mode, power cycle or reset the board and move ``SW5`` switch
|
|
back to ``Normal Boot`` mode. A new USB device should have appeared on your PC
|
|
(check with ``lsusb -d 2207:330c``).
|
|
|
|
To flash U-Boot on the eMMC with ``rkdeveloptool``:
|
|
|
|
.. prompt:: bash
|
|
|
|
git clone https://github.com/rockchip-linux/rkdeveloptool
|
|
cd rkdeveloptool
|
|
autoreconf -i && CPPFLAGS=-Wno-format-truncation ./configure && make
|
|
git clone https://github.com/rockchip-linux/rkbin.git
|
|
cd rkbin
|
|
./tools/boot_merger RKBOOT/RK3399MINIALL.ini
|
|
cd ..
|
|
./rkdeveloptool db rkbin/rk3399_loader_v1.30.130.bin
|
|
./rkdeveloptool wl 64 ../u-boot-rockchip.bin
|
|
|
|
NOR-Flash
|
|
~~~~~~~~~
|
|
|
|
``rkdeveloptool`` allows to flash the on-board SPI via the USB OTG interface with
|
|
help of the Rockchip loader binary.
|
|
|
|
To enter the USB flashing mode on Haikou baseboard, remove any SD card, insert a
|
|
micro-USB cable in the ``Q7 USB P1`` connector (P8), move ``SW5`` switch into
|
|
``BIOS Disable`` mode, power cycle or reset the board and move ``SW5`` switch
|
|
back to ``Normal Boot`` mode. A new USB device should have appeared on your PC
|
|
(check with ``lsusb -d 2207:330c``).
|
|
|
|
To flash U-Boot on the SPI with ``rkdeveloptool``:
|
|
|
|
.. prompt:: bash
|
|
|
|
git clone https://github.com/rockchip-linux/rkdeveloptool
|
|
cd rkdeveloptool
|
|
autoreconf -i && CPPFLAGS=-Wno-format-truncation ./configure && make
|
|
git clone https://github.com/rockchip-linux/rkbin.git
|
|
cd rkbin
|
|
./tools/boot_merger RKBOOT/RK3399MINIALL_SPINOR.ini
|
|
cd ..
|
|
./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.30.114.bin
|
|
./rkdeveloptool ef
|
|
./rkdeveloptool wl 0 ../u-boot-rockchip-spi.bin
|