Djam/u-boot
1
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2025-04-04 12:04:17 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

board: starfive: Remove compatible boards Milk-V Mars CM and Mars CM Lite

Browse source 
Remove leftover code from Milk-V Mars CM and Mars CM Lite boards that do
not exist in upstream Linux Kernel devicetree-rebasing. These will be re-
introduced when submitted upstream for a future U-Boot release. Users of
these boards should use the previous stable release of U-Boot until then.

Signed-off-by: E Shattow <e@freeshell.de>
This commit is contained in:
E Shattow 2025-03-27 10:55:08 -07:00 • committed by Tom Rini
parent f364ea8c25
commit 870c4d105a
6 changed files with 1 additions and 224 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
board/starfive/visionfive2/Kconfig
View file

@ -50,13 +50,4 @@ config BOARD_SPECIFIC_OPTIONS # dummy
imply PHY_LIB
imply PHY_MSCC
config STARFIVE_NO_EMMC
bool "Report eMMC size as zero"
help
The serial number string in the EEPROM is meant to report the
size of onboard eMMC. Unfortunately some Milk-V Mars CM Lite
modules without eMMC show a non-zero size here.
Set to 'Y' if you have a Mars CM Lite module.
endif

8
board/starfive/visionfive2/spl.c
View file

@ -130,14 +130,6 @@ int board_fit_config_name_match(const char *name)
} else if (!strncmp(product_id, "MARS", 4) &&
!strcmp(name, "jh7110-milkv-mars")) {
return 0;
} else if (!strncmp(product_id, "MARC", 4)) {
if (!get_mmc_size_from_eeprom()) {
if (!strcmp(name, "jh7110-milkv-mars-cm-lite"))
return 0;
} else {
if (!strcmp(name, "jh7110-milkv-mars-cm"))
return 0;
}
} else if (!strncmp(product_id, "STAR64", 6) &&
!strcmp(name, "jh7110-pine64-star64")) {
return 0;

11
board/starfive/visionfive2/starfive_visionfive2.c
View file

@ -19,10 +19,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define JH7110_L2_PREFETCHER_HART_OFFSET 0x2000
#define FDTFILE_MILK_V_MARS \
"starfive/jh7110-milkv-mars.dtb"
#define FDTFILE_MILK_V_MARS_CM \
"starfive/jh7110-milkv-mars-cm.dtb"
#define FDTFILE_MILK_V_MARS_CM_LITE \
"starfive/jh7110-milkv-mars-cm-lite.dtb"
#define FDTFILE_VISIONFIVE2_1_2A \
"starfive/jh7110-starfive-visionfive-2-v1.2a.dtb"
#define FDTFILE_VISIONFIVE2_1_3B \
@ -67,12 +63,7 @@ static void set_fdtfile(void)
log_err("Can't read EEPROM\n");
return;
}
if (!strncmp(product_id, "MARC", 4)) {
if (get_mmc_size_from_eeprom())
fdtfile = FDTFILE_MILK_V_MARS_CM;
else
fdtfile = FDTFILE_MILK_V_MARS_CM_LITE;
} else if (!strncmp(product_id, "MARS", 4)) {
if (!strncmp(product_id, "MARS", 4)) {
fdtfile = FDTFILE_MILK_V_MARS;
} else if (!strncmp(product_id, "VF7110", 6)) {
version = get_pcb_revision_from_eeprom();

3
board/starfive/visionfive2/visionfive2-i2c-eeprom.c
View file

@ -573,9 +573,6 @@ u32 get_mmc_size_from_eeprom(void)
{
u32 size;
if (IS_ENABLED(CONFIG_STARFIVE_NO_EMMC))
return 0;
if (read_eeprom())
return 0;

1
doc/board/starfive/index.rst
View file

@ -7,6 +7,5 @@ StarFive
:maxdepth: 1
milk-v_mars
milk-v_mars_cm
pine64_star64
visionfive2

193
doc/board/starfive/milk-v_mars_cm.rst
View file

@ -1,193 +0,0 @@
.. SPDX-License-Identifier: GPL-2.0+
Milk-V Mars CM
==============
U-Boot for the Milk-V Mars CM uses the same U-Boot binaries as the VisionFive 2
board. In U-Boot SPL the actual board is detected and the device-tree patched
accordingly.
The Milk-V Mars CM Lite comes without eMMC and needs a different pin muxing
than the Milk-V Mars CM. The availability and size of the eMMC shows up in the
serial number displayed by the *mac* command, e.g.
MARC-V10-2340-D002E016-00000304. The number after the E is the MMC size. U-Boot
takes a value of E000 as an indicator for the Lite version. Unfortunately the
vendor has not set this value correctly on some Lite boards.
Please, use CONFIG_STARFIVE_NO_EMMC=y if EEPROM data indicates eMMC is present
on the Milk-V Mars CM Lite. Otherwise you will not be able to read from the
SD-card.
The serial number can be corrected using the *mac* command:
.. code-block::
mac read_eeprom
mac product_id MARC-V10-2340-D002E000-00000304
mac write_eeprom
.. note::
The *mac initialize* command overwrites the vendor string and the MAC
addresses. This is why it is avoided here.
By default the EEPROM is write protected. The write protection may be overcome
by connecting the "GND" and "EN" test pads on top of the module.
Building
~~~~~~~~
1. Add the RISC-V toolchain to your PATH.
2. Setup ARCH & cross compilation environment variable:
.. code-block:: none
export CROSS_COMPILE=<riscv64 toolchain prefix>
The M-mode software OpenSBI provides the supervisor binary interface (SBI) and
is responsible for the switch to S-Mode. It is a prerequisite to build U-Boot.
Support for the JH7110 was introduced in OpenSBI 1.2. It is recommended to use
a current release.
.. code-block:: console
git clone https://github.com/riscv/opensbi.git
cd opensbi
make PLATFORM=generic FW_TEXT_START=0x40000000
(*FW_TEXT_START* is not needed anymore after OpenSBI patch d4d2582eef7a
"firmware: remove FW_TEXT_START" which should appear in OpenSBI 1.5.)
Now build the U-Boot SPL and U-Boot proper.
.. code-block:: console
cd <U-Boot-dir>
make starfive_visionfive2_defconfig
make OPENSBI=$(opensbi_dir)/build/platform/generic/firmware/fw_dynamic.bin
This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
Device-tree selection
~~~~~~~~~~~~~~~~~~~~~
Depending on the board version U-Boot sets variable $fdtfile to either
starfive/jh7110-milkv-mars-cm.dtb (with eMMC storage) or
starfive/jh7110-milkv-mars-cm-lite.dtb (without eMMC storage).
To overrule this selection the variable can be set manually and saved in the
environment
::
env set fdtfile my_device-tree.dtb
env save
or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to
provide a default value.
The variable *$fdtfile* is used in the boot process to automatically load
a device-tree provided by the operating system. For details of the boot
process refer to the :doc:`/develop/bootstd/index`
description.
Boot source selection
~~~~~~~~~~~~~~~~~~~~~
The low speed connector nRPIBOOT line is used to switch the boot source.
* If nRPIBOOT is connected to ground, the board boots from UART.
* If nRPIBOOT is not connected, the board boots from SPI flash.
Compute module boards typically have a switch or jumper for this line.
Flashing a new U-Boot version
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
U-Boot SPL is provided as file spl/u-boot-spl.bin.normal.out. Main U-Boot is
in file u-boot.itb.
Assuming your new U-Boot version is on partition 1 of an SD-card you could
install it to the SPI flash with:
::
sf probe
load mmc 0:1 $kernel_addr_r u-boot-spl.bin.normal.out
sf update $kernel_addr_r 0 $filesize
load mmc 0:1 $kernel_addr_r u-boot.itb
sf update $kernel_addr_r 0x100000 $filesize
For loading the files from a TFTP server refer to the dhcp and tftpboot
commands.
After updating U-Boot you may want to reboot and reset the environment to the
default.
::
env default -f -a
env save
Booting from UART
~~~~~~~~~~~~~~~~~
For booting via UART U-Boot must be built with CONFIG_SPL_YMODEM_SUPPORT=y.
With nRPIBOOT connected to ground for UART boot, power the board and upload
u-boot-spl.bin.normal.out via XMODEM. Then upload u-boot.itb via YMODEM.
The XMODEM implementation in the boot ROM is not fully specification compliant.
It sends too many NAKs in a row. Tio is a terminal emulation that tolerates
these faults.
::
$ tio -b 115200 --databits 8 --flow none --stopbits 1 /dev/ttyUSB0
[08:14:54.700] tio v2.7
[08:14:54.700] Press ctrl-t q to quit
[08:14:54.701] Connected
(C)StarFive
CCC
(C)StarFive
CCCCCCCC
Press *ctrl-t x* to initiate XMODEM-1K transfer.
::
[08:15:14.778] Send file with XMODEM
[08:15:22.459] Sending file 'u-boot-spl.bin.normal.out'
[08:15:22.459] Press any key to abort transfer
........................................................................
.......................................................................|
[08:15:22.459] Done
U-Boot SPL 2024.07-rc1-00075-gd6a4ab20097 (Apr 25 2024 - 16:32:10 +0200)
DDR version: dc2e84f0.
Trying to boot from UART
CC
Press *ctrl-t y* to initiate YMODEM transfer.
::
[08:15:50.331] Send file with YMODEM
[08:15:53.540] Sending file 'u-boot.itb'
[08:15:53.540] Press any key to abort transfer
........................................................................
…
...............|
[08:15:53.540] Done
Loaded 1040599 bytes
U-Boot 2024.07-rc1-00075-gd6a4ab20097 (Apr 25 2024 - 16:32:10 +0200)
Booting from SPI flash
~~~~~~~~~~~~~~~~~~~~~~
With nRPIBOOT disconnected from ground for SPI boot, power up the board. You
should see the U-Boot prompt on the serial console.