mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-17 10:04:26 +00:00
b4ad365a46
The only difference between GIC-500 and GIC-600 relevant to TF-A is the differing power management sequence. A certain GIC implementation is detectable at runtime, for instance by checking the IIDR register. Let's add that test before initiating the GIC-600 specific sequence, so the code can be used on both GIC-600 and GIC-500 chips alike, without deciding on a GIC chip at compile time. This means that the GIC-500 "driver" is now redundant. To allow minimal platform support, add a switch to disable GIC-600 support. Change-Id: I17ea97d9fb05874772ebaa13e6678b4ba3415557 Signed-off-by: Andre Przywara <andre.przywara@arm.com>
99 lines
2.7 KiB
Makefile
99 lines
2.7 KiB
Makefile
#
|
|
# Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
|
|
#
|
|
# SPDX-License-Identifier: BSD-3-Clause
|
|
#
|
|
|
|
include lib/libfdt/libfdt.mk
|
|
|
|
RESET_TO_BL31 := 1
|
|
ifeq (${RESET_TO_BL31}, 0)
|
|
$(error "This is a BL31-only port; RESET_TO_BL31 must be enabled")
|
|
endif
|
|
|
|
ifeq (${ENABLE_PIE}, 1)
|
|
override SEPARATE_CODE_AND_RODATA := 1
|
|
endif
|
|
|
|
CTX_INCLUDE_AARCH32_REGS := 0
|
|
ifeq (${CTX_INCLUDE_AARCH32_REGS}, 1)
|
|
$(error "This is an AArch64-only port; CTX_INCLUDE_AARCH32_REGS must be disabled")
|
|
endif
|
|
|
|
ifeq (${TRUSTED_BOARD_BOOT}, 1)
|
|
$(error "TRUSTED_BOARD_BOOT must be disabled")
|
|
endif
|
|
|
|
ifndef PRELOADED_BL33_BASE
|
|
$(error "PRELOADED_BL33_BASE is not set")
|
|
endif
|
|
|
|
ifndef FPGA_PRELOADED_DTB_BASE
|
|
$(error "FPGA_PRELOADED_DTB_BASE is not set")
|
|
else
|
|
$(eval $(call add_define,FPGA_PRELOADED_DTB_BASE))
|
|
endif
|
|
|
|
# Treating this as a memory-constrained port for now
|
|
USE_COHERENT_MEM := 0
|
|
|
|
# This can be overridden depending on CPU(s) used in the FPGA image
|
|
HW_ASSISTED_COHERENCY := 1
|
|
|
|
PL011_GENERIC_UART := 1
|
|
|
|
FPGA_CPU_LIBS := lib/cpus/${ARCH}/aem_generic.S
|
|
|
|
# select a different set of CPU files, depending on whether we compile for
|
|
# hardware assisted coherency cores or not
|
|
ifeq (${HW_ASSISTED_COHERENCY}, 0)
|
|
# Cores used without DSU
|
|
FPGA_CPU_LIBS += lib/cpus/aarch64/cortex_a35.S \
|
|
lib/cpus/aarch64/cortex_a53.S \
|
|
lib/cpus/aarch64/cortex_a57.S \
|
|
lib/cpus/aarch64/cortex_a72.S \
|
|
lib/cpus/aarch64/cortex_a73.S
|
|
else
|
|
# AArch64-only cores
|
|
FPGA_CPU_LIBS += lib/cpus/aarch64/cortex_a76.S \
|
|
lib/cpus/aarch64/cortex_a76ae.S \
|
|
lib/cpus/aarch64/cortex_a77.S \
|
|
lib/cpus/aarch64/cortex_a78.S \
|
|
lib/cpus/aarch64/neoverse_n1.S \
|
|
lib/cpus/aarch64/neoverse_e1.S \
|
|
lib/cpus/aarch64/neoverse_zeus.S \
|
|
lib/cpus/aarch64/cortex_hercules_ae.S \
|
|
lib/cpus/aarch64/cortex_a65.S \
|
|
lib/cpus/aarch64/cortex_a65ae.S
|
|
# AArch64/AArch32 cores
|
|
FPGA_CPU_LIBS += lib/cpus/aarch64/cortex_a55.S \
|
|
lib/cpus/aarch64/cortex_a75.S
|
|
endif
|
|
|
|
# Allow detection of GIC-600
|
|
GICV3_SUPPORT_GIC600 := 1
|
|
|
|
# Include GICv3 driver files
|
|
include drivers/arm/gic/v3/gicv3.mk
|
|
|
|
FPGA_GIC_SOURCES := ${GICV3_SOURCES} \
|
|
plat/common/plat_gicv3.c \
|
|
plat/arm/board/arm_fpga/fpga_gicv3.c
|
|
|
|
PLAT_INCLUDES := -Iplat/arm/board/arm_fpga/include
|
|
|
|
PLAT_BL_COMMON_SOURCES := plat/arm/board/arm_fpga/${ARCH}/fpga_helpers.S
|
|
|
|
BL31_SOURCES += common/fdt_wrappers.c \
|
|
drivers/delay_timer/delay_timer.c \
|
|
drivers/delay_timer/generic_delay_timer.c \
|
|
drivers/arm/pl011/${ARCH}/pl011_console.S \
|
|
plat/common/plat_psci_common.c \
|
|
plat/arm/board/arm_fpga/fpga_pm.c \
|
|
plat/arm/board/arm_fpga/fpga_topology.c \
|
|
plat/arm/board/arm_fpga/fpga_console.c \
|
|
plat/arm/board/arm_fpga/fpga_bl31_setup.c \
|
|
${FPGA_CPU_LIBS} \
|
|
${FPGA_GIC_SOURCES}
|
|
|
|
all: bl31
|