Djam/arm-trusted-firmware
1
0
Fork 0
mirror of https://github.com/ARM-software/arm-trusted-firmware.git synced 2025-04-19 02:54:24 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
arm-trusted-firmware/include/drivers
History
Yann Gautier e5b267bba1 feat(mmc): manage SD Switch Function for high speed mode 
On SD-cards, Switch Function Command (CMD6) is used to switch
functions, like setting High Speed mode. It is useful for high capacity
cards to double frequency (from 25MHz by default to 50MHz).
If the SD-card is High Capacity, a CMD6 is issued after filling the
device information. If High Speed mode is supported and the switch is
OK, then the max_bus_freq can be set to 50MHz. The driver set_ios()
function should then be called to update peripheral configuration,
especially clock prescaler.

Change-Id: I2d6807aa7f9440d2b2f907a747cd3b47a2ba1545
Signed-off-by: Yann Gautier <yann.gautier@st.com>
2022-08-16 15:58:22 +02:00
..
allwinner feat(allwinner): allow to skip PMIC regulator setup 2021-12-27 15:32:22 +00:00
amlogic meson: Use generic console_t data structure 2020-02-25 09:34:38 +00:00
arm fix(gic600): implement workaround to forward highest priority interrupt 2022-06-15 22:02:13 +01:00
auth Merge "feat(auth): enable MBEDTLS_CHECK_RETURN_WARNING" into integration 2022-06-27 18:01:12 +02:00
brcm Merge "driver: brcm: add USB driver" into integration 2021-04-12 16:44:11 +02:00
cadence cadence: Change logic in uart driver 2021-01-11 17:28:00 +00:00
cfi Standardise header guards across codebase 2018-11-08 10:20:19 +00:00
coreboot coreboot: Use generic base address 2020-02-25 09:34:38 +00:00
fwu feat(fwu): add a function to pass metadata structure to platforms 2022-01-27 18:09:02 +05:30
io feat(io_mtd): offset management for FIP usage 2021-07-13 18:16:55 +02:00
marvell fix(plat/marvell/a3720/uart): do external reset during initialization 2021-12-02 17:38:02 +01:00
measured_boot fix(measured-boot): add SP entries to event_log_metadata 2022-05-25 13:04:37 +02:00
mentor Standardise header guards across codebase 2018-11-08 10:20:19 +00:00
nxp refactor(nxp): use DPG0 mask from Arm GICv3 header 2022-06-15 22:02:18 +01:00
partition feat(guid-partition): allow to find partition by type UUID 2022-07-05 14:46:02 +02:00
rambus drivers/rambus: add TRNG-IP-76 driver 2021-02-11 09:43:18 +00:00
renesas/rcar/console rcar: Use generic console_t data structure 2020-02-25 09:34:38 +00:00
rpi3 rpi3: gpio: Simplify GPIO setup 2020-03-17 12:44:09 +00:00
st feat(st-pmic): add pmic_voltages_init() function 2022-03-22 09:09:23 +01:00
synopsys drivers: synopsys: Fix synopsys MMC driver 2019-03-12 14:39:50 +08:00
ti/uart 16550: Use generic console_t data structure 2020-02-25 09:34:38 +00:00
clk.h feat(clk): add a minimal clock framework 2021-12-22 13:07:23 +01:00
console.h Don't return error information from console_flush 2020-10-09 10:21:50 -05:00
console_assertions.h Sanitise includes across codebase 2019-01-04 10:43:17 +00:00
delay_timer.h delay: correct timeout_init_us() 2019-10-08 11:13:06 +02:00
dw_ufs.h Standardise header guards across codebase 2018-11-08 10:20:19 +00:00
generic_delay_timer.h Standardise header guards across codebase 2018-11-08 10:20:19 +00:00
gpio.h refactor(plat/rockchip/rk3399/drivers/gpio): reduce code duplication 2022-01-04 15:26:43 +01:00
mmc.h feat(mmc): manage SD Switch Function for high speed mode 2022-08-16 15:58:22 +02:00
nand.h feat(nand): count bad blocks before a given offset 2021-07-13 18:16:55 +02:00
raw_nand.h nand: raw_nand: fix timeout issue in nand_wait_ready 2020-09-24 09:32:23 +02:00
scmi-msg.h drivers: move scmi-msg out of st 2021-01-20 11:37:14 +08:00
scmi.h drivers: move scmi-msg out of st 2021-01-20 11:37:14 +08:00
spi_mem.h Add SPI-MEM framework 2020-01-20 11:32:59 +01:00
spi_nand.h Add SPI-NAND framework 2020-01-20 11:32:59 +01:00
spi_nor.h Add SPI-NOR framework 2020-01-20 11:32:59 +01:00
ufs.h fix(ufs): add retries to ufs_read_capacity 2022-07-07 07:14:33 -07:00
usb_device.h fix(drivers/usb): add a optional ops get_other_speed_config_desc 2021-11-05 11:28:59 +02:00